Live from afar - Ableton Push 3 standalone album, with Model 1, Zen Delay, and Polymoon

[@seanelliotmusic]

Remarkable. I can barely keep track of where I am on one simple track and here you are flipping and changing and arranging and playing live all over the shop! An absolute delight to listen to and an inspiring masterclass to watch Sir!

[@modalida]

I watch a lot of electronic performance videos and they rarely jolt. when you looked up and started singing directly into camera it stopped me dead. Super cool stuff you're doing

[@michaels8607]

something i can respect..a man who takes his gear and makes great music instead of crying about the shortcomings,as if something perfect exists..

[@HelicopterRidesForCommunists]

The difference between artists, musicians, and hobbyists, versus the rampant midwittery that plagues Western society.

[@naturalbornrigger]

Downloaded this on Bandcamp today. Listened to it on Breakfast, then while riding bike in Frankfurt, did the dishes with it, preparing Burgers for dinner and i can't let go. I thought Nychtheremon and Youth of age are my fav's.. But after half a day i think every track has it's own beauty. Love'emAll! Thx for indulging us! Go Vinyl!

[@cfichter]

Danke!

[@JayHosking]

Thank you! Much appreciated.

[@DrumBuss909]

Very inspiring, I'm in the process of figuring out my live set as well. I would love a walkthrough about what Macros you have set up on Push! Cheers

[@andrefick2077]

ive been looking for push performances the whole day, this is by far the best ive seen. Super impressive that its all in one take

[@groove_sapient]

Fantastic production. You are an artist and a wizard.

[@712Jefferson]

Awesome stuff, Jay, and glad to hear (on Elektronauts) that you've been loving your Push. Have been enjoying mine as well.

[@dreymorneau]

Sounds absolutely superb, as per usual. I hope to see you performing live in Vancouver soon!

[@JayHosking]

I would love to! Just need to figure out where/how first!

[@allanalogallnite]

This was a masterpiece. Thank you for creating & sharing. Keep on rockin’. 🎛🎚👑

[@mikerollmann1118]

I discovered your music a while ago and absolutely adore it. Especially Flame azalea. This track brings tears to my eyes. So much feelings. Thank you very much for everything. Greetings from Germany 🇩🇪.

[@MikkelGrumBovin]

I had this setlist on repeat all night , last night - and once in a while , i took a glance out on my apartmentfloor - i had some friends over - which developed from a little gettogether , into a fullblown cocktail party , which just never seemed to end - and The Hoskingianna sound was that magic backdrop , never intruding but just a perfect backdrop for a damn fine allnighter - You -Jay - made that evening unforgetable,- do know - that not one day goes by , without a Jay Hosking tune has been played ,-

[@pixelplayground]

Mind = blown. Sent shivers down my spine. Nice one Jay!

[@MikkelGrumBovin]

Im FLABBERGASTED 😮 this is Uber filmic, suspense and Drama - The Hoskingianna is STRONG in this one 😘✨👌You are such a rare breed, man -

[@EricRaymondSF]

So much fun listening to the variations after being so familiar with the album/video versions. Nicely done, man!

[@StephanieSante]

Incredibly nice set. Bravo. You should go on tour with TD.

[@dsweet5273]

This is incredible! Thanks for sharing!

[@D4m1c14]

A master piece to start to finish ,thank you to share. Would love to see this setup explained more in deep. Congratulations man.

[@werewolf_sif]

Absolutely sick performance!!

[@parkerhordon]

This was amazing. That model one sounds so goooooooood ❤

[@StephanieSante]

Well done Jay.

[@soularslaps]

wow, this is before the update too, good shit, inspiring!!!

[@rjamesm]

Amazing work 🙌🙌🙌

[@HarryFullerCT]

Amazing as usual! I needed this kind of escape today. Thanks again Jay!

[@bvrbvs]

Please more push 3 use cases. Loving mine

[@el_dani]

Amazing sound and musical quality 😊

[@christophergilman7606]

Ostinato has been one of my favorite tracks (I never knew the name of) since your live recording with the moog rig. another great video. Bravo, hope to catch you in a club someday.

[@voflondor]

Wonderful - thank you for sharing this! And best of luck playing it live in Seattle, hope you have lots of fun~

[@Kevvywevvy]

Such a good set 👌 loving earthshine. Class m8t 😊

[@robomalo]

Beautiful

[@logimite7174]

great album!

[@clayxaviermusic]

Already got an album on it is nuts! Good stuff

[@djason_music]

Absolutely loving this.

[@alanhumble662]

Excellent work

[@Jegkedermigmega]

This is so cool. You remade some of my favorites :)

[@1wildrogue]

Wow, Jay. Ostinato is probably my favourite piece of yours and this version with the added synths and drums was incredible. I was hoping that you would add guitars at the end but then you played a guitar solo like lead on the push. Worked perfectly🙂

[@d3maccus]

nice work and I need to get that mixer those filters sound fresh af!

[@clarkflavor]

Oh, wow - this is kinda what I want to do as well. Pre-ordered the Push 3 a few days ago, but will have to save up for the Model-1 😅 this sounds fantastic!!

[@monomakes]

Wonderful sounds! Thank you Jay.

[@lewdowl5979]

Ostinato is a banger! I come back atleast once a day to listen to it. Album bought

[@ccmp23]

Great work, Jay. 🤙

[@EZBOT_]

Can't wait to hear this live next Tuesday!

[@JayHosking]

Can't wait to hear your set too! All the sets, really!

[@el_dani]

does this count as DAWless? 😅

[@davidbanner9001]

Excellent. I love the remix of "Flame Azalea". A really great chord progression, but without the kit being on a mirror and recorded outside this time.

[@sirens93]

love it thanks

[@neonvoid]

great work!

[@Stevensonnnnnn]

You are the master, Jay 🙂

[@thomaskoeln3872]

Yes outstanding all the time 😊

[@kossfort1848]

Awesome !!!!!!!!!!!!!!

[@ruibas]

Perfect !

[@cesarsjogren]

Banger. Salute

[@OMA_Music_Official]

Yep, model 1, zen and Push is the way to go. 🕉️

[@REOvolt]

Nice! I’m planning a somewhat similar setup, but with two Push 3 standalone, less tracks, but more fx. Same mixer but 1.4. Zendelay, H90, LVX and Analog heat+fx. The idea is to mix my tracks between the two temp matching by hand. This way I can create endless transitions and combinations on the fly. It’s a bit more expensive having two Push 3’s, but the fun should be more than double.

[@tentsio]

you lucky bas...😊, I would love to try that kind of setup, I just posted about that and then read this 😆.

[@ChantalCardinal-g5c]

Magnifique!

[@aevai]

This is great!

[@tentsio]

I would like to try using 2 Push stand alones with a dj mixer, using them like my "decks". It will take time, I have to afford the first one yet 😆.

[@johnpaullovetek1809]

Fantástico equipamento sonoro e amazing music🎼🌆🎛️🎹🕺

[@davebetts900]

I still think #Ericasynths should send you some gear, I can only imagine what you'd do with their stuff. Another great video mate, love it 🖤

[@jiayisong7486]

Hi Jay! I clicked on the video while struggling on my 217 exam :) thanks for the music :)

[@JayHosking]

Good luck on the exam! It gets easier after 217/218.

[@Artek604]

Amazing!!! Thanks for sharing

[@gustavodorta9034]

Best push 3 performance I’ve seen so far. Congrats! You are a Octatrack lover, does this means that your performance sequencer brain has change from now?

[@JayHosking]

Hey, thanks so much. I don't think this will change my relationship with the Octatrack. The Push 3 is amazing, but I see its main value in compiling a number of songs, some of which will still be created on the Octatrack. But who knows? Maybe I'll change my mind! Thanks again.

[@everpuremusic]

Very nice! But I must admit that I am a bit surprised that you haven't included the Octatrack as part of your "live setup". I get that this video is mostly about showcasing Push 3 and the Model 1 mixer. But the Octatrack has been such a central part of so many of your performances that I would have expected it to be irreplaceable for you in a live performance. In any case, keep it coming - I am always inspired by your jams!

[@JayHosking]

I have definitely tried to incorporate the Octatrack into every live set I've built, including this one. But in this case, the OT's four inputs would limit my mixing; I'd want to have drums on the OT, and then I'm switching banks patterns on the OT, which is one more mental thing to juggle. As such, I skipped it for this setup, and think (in this current incarnation) I'll continue to skip for the moment. But I could see a simpler setup with just Push and OT in the future. I'm also building an OT set at the moment. AND bear in mind that a bunch of these tracks were built in OT to begin with! More OT soon!

[@everpuremusic]

@@JayHosking 😍

[@heck.6184]

This is so cool!! How does the signal from the push split across all of the Playmaker's channels?

[@JayHosking]

Via output from Push 3 to the audio interface to mixer. And thanks!

[@josefstrom4865]

a littel bumpy start for the 2,46 transition ...like - when der elekto trippig is _love

[@yerrylll11]

SUPER

[@CrookedWalking]

So good ❤️‍🔥

[@JayHosking]

Thanks so much! Let's do a show in Vancouver.

[@CrookedWalking]

@@JayHosking 💯 we'll talk we'll talk 🙏

[@Sonic-Boom]

16:30 - awesome drop. You have supreme control of these machines.

[@benzmobil]

Very nice live set! The new Push seems to be a solid standalone device. Can it be paired with midi fighter or similar midi controller for master track beat repeat, etc effects?

[@JayHosking]

I haven't tried it, but considered that. I'll post something here if I ever get around to trying it!

[@marcusfreeweb]

Best I heard for a while. Does it help to reduce choices? How much of the sound character (soft saturation) comes from using the external boxes? Mix does not sound this "boxy" then, maybe.

[@JayHosking]

I wouldn't necessarily trust my ears (it's just fun and lovely gear), but something tells me the Model 1 does some nice subtle work to the overall sound, especially bass. The effect sends really just allow me to perform and have fun, while also creating transitions and a seamless set. And thanks so much!

[@marcusfreeweb]

@@JayHosking Yes, from my experience, if you do "any" analog processing at all, the whole mix gets more liveliness and depths. Something out of the box makes a difference.

[@Synth-PatchesCom]

This is simply amazing. Congrats!!! How did you master the sound after recording? Model 1 can not record separate tracks so did you use some Ozone only? Once again - stunning work.

[@JayHosking]

Yeah, this is just stereo out of the Model 1, with some light mastering on top (EQ, compression, limiting).

[@Synth-PatchesCom]

Thank you. Which exactly Focusrite Adat interface do you use?

[@JayHosking]

@@Synth-PatchesCom Scarlett 18i20 3rd gen!

[@chiragpatel4638]

Did you have more fun performing Come Back on this setup or the Octa?😊

[@JayHosking]

More fun? Good question. I like the Octa's scenes more for playing, but I liked being able to add a synth lead at the end here. It's a toss-up!

[@BassAnywhere]

Hi Jay, very nice performance and setup ! I'm curious about the channels going into the Model 1, what was your strategy for grouping all the tracks into 6 channels ?

[@marcusfreeweb]

Very musical. Are the crunchy drums from Ableton stock samples, processed how? There is a lovely lofi touch on everything, I'm really curious.

[@JayHosking]

The drums come from all over the place. Some are hardware, some are loops, some are stock from Ableton or NI collections, some are Addictive Drums 2.

[@2MinuteWarning]

Very nice set Jay, really enjoyed it! Glad you found a setup that suits your need for live playing 😃👍 I was wondering if you considered, for a while, integrating 1 or 2 "small" instruments in this setup like the Minitaur, Bass Station II, Minifreak nay Take 5...? (in order to be able to tweak some knobs live 😉 even if I'm aware that it would somehow complicate the performance 😅)

[@JayHosking]

I definitely want to do this. The main reason I didn't was for simplicity of setup when I'm travelling. If space and setup time was no matter, I'd definitely have the Minitaur and maybe Nymphes on the table, and the Sub37 or similar to the side to play. But yeah, more gear means more wiring and more possibility of something going wrong, so I'm trying to simplify as much as possible. And thanks!

[@2MinuteWarning]

@@JayHosking I totally get you here 😉(and thanks for the quick reply! 👍)

[@earth_a_n_g_e_l]

I'm curious if you could have pulled this set off without the mixer, using an External Audio Effect device on a send channel for the FX, and EQ devices for the EQ. Definitely preferable to have hardware but it seems feasible that the 18i20 ADAT + Push could serve as a performance mixer solution for those of us that don't have a Model 1-caliber mixer on hand.

[@JayHosking]

I think it could certainly be pulled off using the Push 3, sending stereo outs to one send effect (e.g. the Zen Delay), back in through the inputs, and then sending master through the headphone output. You could pair it with something like a Faderfox to have faders on the side, and use macros on the Push to do filtering. That way you wouldn't need mixer or audio interface. For sure!

[@MrJansteiner]

Very funny... this is the track I've been remixing! Had to look up whether "Nychthemeron" is a made up word or what 🤣 Very cool track.

[@DeepDishCoffee]

How would one get fx from Ableton master if the tracks get split out? If I want to use abelton fx on the master I mesn

[@JayHosking]

You're not able to have master level effects and also have individual outs. However, you can have effects across multiple tracks mapped to the same fader via Multimap, the m4l device, so you could (for example) have a filter on each device being controlled all at once.

[@DeepDishCoffee]

@ ahh I see I wonder if once everything is hooked up. In stead of going from the master out of model one going to the speakers it goes back into the line in in push then back out of push to the speaker instead and then apply master from Ableton but still have control of each track in the model one.

[@soularslaps]

Also, whats going on with your routing? are you sending diff tracks to the mixer with the adat attached to that interface? would love to know more about your setup!!

[@JayHosking]

Sending groups of different tracks to the mixer via ADAT, yes, exactly. I think there's a video about this setup on my Patreon, though I think you've nailed it already.

[@bvrbvs]

10:07 is that drift?

[@JayHosking]

Yeah, that's Drift whenever I'm playing melodics on the pads.

[@HelicopterRidesForCommunists]

Making music with gear > talking about pros and cons of gear that makes music

[@martenmeij]

Awesome tracks and performance Jay! And I love to see the Push 3 in action this way. The performance fx you use, are they per track? Or on the master or on a group of tracks?

[@JayHosking]

Most are macros that are controlling multiple per-track effects, but some are on groups. I'd lose to do master, but there's no master out from the Push, only the individual outs! And thanks!

[@martenmeij]

@@JayHosking Ah, I get it, since you are using the ADAT outputs. Thanks!

[@krolkoolmarek7074]

Good

[@ChristopheCarrieres]

wonderful ❤❤❤, what is your model of Focusrite interface ? I was thinking to buy one to have a similar live setup ...

[@JayHosking]

Scarlett 18i20 3rd gen, I believe. And thanks so much!

[@MikkelGrumBovin]

😮😭🥲🥰 - Your such an great songwriter .... This was a setlist to die for ! How you managed to get it all into that miniscule package.... It´s astonishing .... Pack your Gear and Commence that ineviable "Hoskingianna Worldtour" ..... it´s time... We are ready... The World is Ready..... For Jay Hosking,- 🍾🍾🍾🍾🍾🍾 ✋😃👆 🍾🍾🍾🍾🍾🥂

[@GlitchComputer]

How do you like the Model 1??

[@JayHosking]

I really like it. Sounds great, workflow is great, and is the most inspiring mixer I've ever had by far.

[@JustoAlvarez1]

This is great! Congratulations for the hard work you put in. I just have one question. If you are sending 2 output signals from push into the interface, Why the model 1 is receiving 5 signals?

[@JayHosking]

I'm sending ADAT out to the audio interface. Max number of channels on ADAT is 8, or 4 stereo outs from the audio interface to the Model 1 mixer. The last stereo input to the mixer comes directly from the Push 3's audio output. Hope that helps. And thanks!

[@JustoAlvarez1]

@@JayHosking ohhh that’s the drill, that’s awesome. Thank you for the reply. I wasn’t familiar with adat technology

[@qwertySnowy]

Does the adat audio interface send out to 6 tracks on the model 1? So u can control 6 tracks separately. Is that 10 stereo outs for 6 tracks? Love the vid

[@JayHosking]

ADAT sends four stereo outs, plus one more stereo out from the Push 3 itself. And yes, that gives you control over five separate tracks on the mixer. And thanks!

[@qwertySnowy]

@@JayHosking oh great good to know. What do u do with the 6th track on the model one. It's shame audio can't be sent over one usb cable. It's seems all the adat controllers are super huge bigger than a laptop lol

[@witchbutter]

Is that using adats to a focusrite 8pre then routed to the mixer? I'm setting up something remarkably similar.

[@mrrafsk]

When you touring london/eu!

[@JayHosking]

As soon as somebody will hand me a gig! (Or as soon as I start looking for one, I guess)

[@DeepDishCoffee]

So is it possible to output 6 channels from push to the model 1? I heard it's 8 outs plus 2 from master so that's only 5 channels? 5 strereo or can u do 6? Just thinking can u use up all 6 channels on the model 1 from push?

[@JayHosking]

There is ADAT that gives you more than 8 outs, but I'm only using 8 out. So 8 out from ADAT (i.e. 4 stereo outs), plus 2 out from Push 3 (1 stereo out) here.

[@DeepDishCoffee]

@ nice and what u do with the 6th channel. Thanks for all the info!! :-)

[@DeepDishCoffee]

How do u find this mixer?

[@JayHosking]

It's incredible. Love it.

[@milDelux]

Lots of Tame Impala / Radiohead influence. LOVE IT ALL

[@milDelux]

Except for drum machines and no guitar haha

[@final_animal]

Hi Jay. Are you finding that you can make it through a live set without the Push 3 crashing? I'm looking into it for that purpose, but hearing many reports of it crashing while in use

[@JayHosking]

I had a crash when I played it live in a club, but during the recording of this set/video, and in all my time preparing, it didn't crash at all. If I had to guess, it crashed during the club set because it had been running/idling for longer, but I don't truly know.

[@ColibrisMusicLive]

Is the Zen delay clock sync? can you please tell what is the buffer size, round trip latency ? Is it monitored THRU the push 3 ableton via spdif??

[@JayHosking]

The Zen delay is definitely not clock synched here. I use the tap tempo quite a bit, but also do a lot of dialling in by hand. I have no idea what the round trip latency is. Virtually undetectable. I'm using 64 or 128 buffer, can't remember. The output of the mixer goes to an audio interface where it's recorded, just a stereo in. Hope that helps.

[@ColibrisMusicLive]

​@@JayHosking thanks, i am trying to figure out if Push 3 can tightly handle an external clocked synced device which is monitored THRU it - with no computer. so far i could achieve it only with top notch audio interfaces + macbook

[@EdoardoMarcora]

Very Robert Milesy! :)

[@FakthorX]

I love my model 1!! Is the ableton standalone worth it?

[@JayHosking]

I don't know how much I'll use it for song creation yet. But if you're looking to play full live sets, or even want to think of it as a multitimbral MPE synth, there's certainly value. I'll share more here when I try other use cases.

[@217tws]

I love Lustral but this version feels even more alive than the original for some reason

[@JayHosking]

Yeah, it was really nice to revisit this one in particular, add a breakdown, more drums, etc.

[@stephencrane561]

I was gonna write some verbose prose... ...but instead I thought I'd go with my first and last reactions: "£uck me, that was terrifyingly good"!

[@OleksiiSolonenko]

Where is your beard?

[@JayHosking]

It fell off! (It'll probably be back after the summer)

[@KentBuchla]

Clean,like his beats.

[@LordoftheBadgers]

Ah dude. I've yet to, er, push mine much yet but this is inspiration! You used it much with hardware synths?

[@JayHosking]

Not much yet, no, though for future song creation, I'll probably give it a shot with hardware.

[@LordoftheBadgers]

@@JayHosking yeah still getting to grips with mine - decided to stick with its shortcomings cause the basic tool is good imo. Plus it has those lovely spitfire sounds