Mercedes Rear SAM programming example.

[@agm9831]

Thanks Luis, great video helped me fix my issues with a rear SAM on a 2008 ml350

[@LMAutoRepairs]

☺️ 👍👍👍

[@matejanosvarga4478]

Much appreciated Luis, nice example of what maxisys is capable of when in the right hands!

[@LMAutoRepairs]

☺️ 👍👍👍

[@pedrosotolopez4457]

What model of autel do you have ??

[@LMAutoRepairs]

@pedrosotolopez4457 MS908P

[@user-jg6vw3em9f]

Good morning Luis! Excellent step guide as always

[@LMAutoRepairs]

😊 Thanks! 👍👍👍

[@otomichalko8966]

Rear vent windows are on GL320 which is x164 model. I believe ML320 is W164

[@LMAutoRepairs]

👍

[@dtandfam8100]

Excellent walk thru on this. Appreciate you sharing!

[@LMAutoRepairs]

☺️ Thanks! 👍👍👍

[@MrByootox]

Sometimes I think you learn more programming the modules manually, nice little short one this time Luis 😊😊😊

[@LMAutoRepairs]

Agree... 👍👍👍

[@dejankaran3640]

Thank you for putting in effort to show us what it looks like. What version of autel is this? Can it program the main computer N3/10 component the ME-SFI control module. Also can you program the front SAM? I got rear SAM that wanter got to the board, and also front SAM that shorted and burned the board so what I want to try is to buy them and try to program both rear and front SAM eith autel.

[@LMAutoRepairs]

Hi This is the MS908P... and yes, should be able to program those as well... 👍👍👍

[@jasonwestwood5155]

hi i have a mercedes ml 280 cdi 06 version both front seats are not working but when u plug diagnostic tool in they work so its not the seats them selves is their somethin i am missing or would u know what the cause would be by any chance.

[@SaultiBalldeip]

I assume this scanner should be able to reprogram the ISM? If so can it change the ISM gearing to go into neutral etc? Cheers!

[@LMAutoRepairs]

Possibly... Never did that particular one... 👍👍👍

[@daninurbur7690]

I replaced the rear SAM with a used one and everything worked, but I get a warning about the rear seats not fitting, but in my car they don't fold down. How can I delete this and what program is it? Regards.

[@LMAutoRepairs]

Needs programming/coding... Similar to what I have done on the video...

[@World999]

Hi where abouts are you based? I’ve got an issue with my car that I’ve seen on your channel that you’ve diagnosed and fixed before!

[@emiraceala2915]

I have a 2007 w204, with prefacelift led rear lights and I want to retrofit the facelift led rear light. I saw on some groups and forums that the rear SAM needs to be recoded and they said I could do it with a regulat obd cable and a laptop? How is that possible, what software do I need to do that? Thanks in advance!

[@LMAutoRepairs]

Not sure... could be that there is some software out there capable or coding the unit... Unfortunately I am not sure... Go on those same groups and forums and ask... 👍👍👍

[@michellh.1088]

Hi Luis. Unrelated question. I believe I have a spark plug issue for my car (P0300 code). Should I also replace ignition coil and or wires too ?

[@LMAutoRepairs]

I would establish what is at fault, and would replace those only... The spark plugs, if they are "due" to be replaced, just do them all, the rest check first... 👍👍👍

[@michellh.1088]

@@LMAutoRepairs Thank you so much

[@lotfibenabdallah1117]

Thank you so much , I appreciate your time and efforts excellent job

[@LMAutoRepairs]

😊 Thanks! 👍👍👍

[@RaqeTube]

Hi Luis, I've programed my rear SAM same as you did, but i was in need to reset the "Fuel pump sensors" which i couldn't find to program or code, my fuel gages is still stuck on full and the reading shows an error: (90DA) + (90DS) any advice? Please note: i've checked the SAM module and all of its resistors and it seems ok!

[@LMAutoRepairs]

Hi First, why did you programmed the module? Was that a replacement? 👍👍👍

[@RaqeTube]

@@LMAutoRepairs ​No sir, I've replaced the main battery and after the installation all of the features in the rear side of my car a "W164" didn't work, so i've checked the rear SAM and i found a little bit of water leakage from sunroof to that area, then i had to open it and clean it and re-program it, everything is working fine right now but the fuel gauge, it stuck on full all the time!

[@LMAutoRepairs]

Could still be an issue with the rear sam... Inspect the board and the internal circuit if the lever sensors...

[@jackiemay9471]

good morning Luis

[@LMAutoRepairs]

👋 ☺️👍

[@taz8436]

Great video thank you for sharing

[@LMAutoRepairs]

😊 👍👍👍

[@isalmankhan1]

Great video, Thanks for sharing Bro👍 Love the results😍 Stay Safe Bro👍

[@LMAutoRepairs]

☺️ Thanks! 👍👍👍

[@Oshaad1]

What scanner can be used to program my rear sam module for Mercedes?

[@LMAutoRepairs]

Xentry...

[@Oshaad1]

@@LMAutoRepairs Which Xentry scanner do you recommend? I’m trying to program my rear sam as well.

[@Oshaad1]

Could send a link to the scanner you’re referring to

[@LMAutoRepairs]

Just google Xentry... That is the software...then you need a laptop and the VCI... Or, you can get everything as a ready setup... 👍

[@randohoxha-pz1zw]

I have order from ebay a rear sam for my w204 200cdi 2011.when i change it does it needs coding?

[@LMAutoRepairs]

Most likely... Specially if your car has functions that the donner didn't, or vice versa... 👍👍👍

[@randohoxha-pz1zw]

@@LMAutoRepairs Thank you for your answer

[@ebrahimsadeghi5883]

Does this works on new modules also ?!!

[@LMAutoRepairs]

Yes... that was how I have programmed the new module for this car... 👍👍👍

[@beluxauto5968]

I was just thinking, STAR/XENTRY is as straightforward like the AUTEL.or vice versa. So why I always grab STAR? Old habit I guess. Not that I have to program so many modules. Nice quick video Luis.

[@LMAutoRepairs]

☺️ 👍👍👍

[@LynxStarAuto]

That's because Autel basically clones the factory software when it comes to these functions.

[@Noneofyourfknbizness]

Which device model?

[@LMAutoRepairs]

The Autel? MS908P

[@Noneofyourfknbizness]

@@LMAutoRepairs Yes, thank you!

[@omerward9261]

Can you code rear sam on the im608

[@LMAutoRepairs]

I believe coding yes... programming no... 👍👍👍

[@omerward9261]

Thanks for the message You start your day early Love the videos

[@LMAutoRepairs]

☺️ I do... 👍👍👍

[@aymenmohamed1134]

Awesome

[@LMAutoRepairs]

Thanks! 👍👍👍

[@hashirnawaz4532]

Nice

[@LMAutoRepairs]

😊 Thanks! 👍👍👍

[@felipefernandez7267]

Mercedes s500 w220 jahr 1999

[@mrgrumpy5116]

😊👍

[@LMAutoRepairs]

☺️ Thanks! 👍👍👍

[@chatchaipoka8227]

Like

[@LMAutoRepairs]

😊 Thanks! 👍👍👍