Vauxhall-Opel Corsa D 1.2 not starting after flat battery... Immobiliser faults and programming.

[@nemanjadzombic6101]

This video may be boring to someone who does not do this professionally. They expect to see short instructional video like 'do this, press that...' But in realitty, things often get complicated and that,s why videos like this are pure gold.

[@LMAutoRepairs]

😊 Thanks, really thank you for your comment! Very well said! Thank you also for watching, and hope you have subscribed! 😉

[@SuzukiGSRHomemade]

To be honest, I fully agree with your comment, it is truly profound. In addition, thanks for LM Auto Repairs for such videos, very informative.....

[@LMAutoRepairs]

😊 Thanks!

[@swarajjoye]

Great video. Currently I have a similar problem. Airbag bag module soaked with anti freeze. Now I have similar DTC. got a donor airbag module, same part number but didn't work. I'm using IM608. Any suggestions guys.

[@LMAutoRepairs]

Have you coded the airbag module?

[@MrFOXMAROC]

the funny is that i had this problem yesterday , but what i did is :unplug ECU socket and plug it back , then erase the fault code , and the car run. the ECU freeze on opel cars when flat battery. maybe next time unplug the ECU that might work for u . thanks for the video i learn every time a new thing from you sir.

[@LMAutoRepairs]

That's interesting... I will try next time...🤞 Thanks! 👍👍👍

[@hishamkikhia5269]

Hallo my Friend, can you help me ? i have question , where can i find Ecu Socket in the car? best regards to you

[@LMAutoRepairs]

On the ecu itself...

[@hishamkikhia5269]

thank you for your replay I would Say , where is the location from Ecu in Car ? where can Ecu finden ? best regards

[@LMAutoRepairs]

@hishamkikhia5269 On this model, bolted to the intake manifold... I am pretty sure I showed it on this video... 👍👍👍

[@DRANSE]

Thank you for the instructional video, thanks to it I was able to start the Corsa D 1.4 XEP without spending a lot of money with the same fault, a little click and the car works again. Thank you again. Greetings from Poland

[@LMAutoRepairs]

☺️ That's great! 👍👍👍

[@petergwatts9037]

Big important thank you to LMautos. Finally got my Corsa d fixed without any new parts exactly as you said. Two of the first three mechanics were highly miss leading threatening massive bills and long term off road. The third one was not correct either. Only believing in LMautos led to get in a fourth opinion and it worked out correct. This problem is a minefield for non mechanically minded car owners.

[@LMAutoRepairs]

Great you had it sorted! 👍👍👍👍👍👍👍👍

[@bobnashnash7965]

Hi, this is a common problem with Corsa D if the battery goes flat slowly or the starter motor chatters. All you need to do is reset the BCM and then reprogram it. Regards Bob Oxford Vehicle Electronics

[@LMAutoRepairs]

Correct... Thank you for watching and for your comment!

[@IntradeMotors]

remember the key was recognized still. so the transponder in the key was not lost ... another reason why the immobilizer would give problems common on many opel product to loose transponder out of keys.

[@moustaphandjiliw6577]

@@LMAutoRepairs i have a chev utility with the same problem my battery was flat now doesn't start

[@nigelcarter41]

Thankyou, followed this tutorial and it works 100 percent. My vauxcon was just sat there getting dusty but so glad I had it to hand. Great tutorial!!

[@LMAutoRepairs]

☺ 👍👍👍

[@kevinsynnott]

I have done this repair many times. There is no need to reset engine or IPC. Just reset the BCM, Then reprogram the bcm and select BCM installed. Will reprogram the keys and all good.

[@LMAutoRepairs]

Thanks!

[@petergwatts9037]

Are you anywhere near Brighton?

[@tonyobrien5642]

How much does it cost to get this done its happening on my astra

[@kevinsynnott]

@@tonyobrien5642 it is not the same system on the astra

[@g19aby]

Will try this first. Many thanks for sharing the information. 👍🍻

[@rhysnicholson4860]

Great vid I've come across this fault multiple times in the past after a flat or faulty battery on petrol corsa d (never a diesel) if you were to scan the vehicle with tech2 on the dtc's relating to the wrong environment identifier there would be a message saying refer to service bulletin 2522 if I remember correctly telling you to reset the BCM and reprogram it with there new More robust version of software then carry out configuration of module, immobiliser function and keys and all's good again. Keep up the good work 👍

[@LMAutoRepairs]

👍👍👍 Thanks! For watching and for your comment!

[@petergwatts9037]

Are you a lady car sparky, how cool. Found your info here almost as excellent as this video itself. Spoke to more than ten Sparky's this week and none of them nailed it like you and LM. Thank you.

[@petergwatts9037]

Are you anywhere near Brighton, my Corsa d is still dead?

[@wolterxx7589]

You could get the same after removing the battery clamp. And after 40 engine starts, the error will appear again. In my Opel Meriva I have this fault for half a year. Services OPEl pointed to the BCM module. I waited half a year to replace the module

[@mattstern3797]

Absolute legend! Was not looking forward to a £££ bill from the auto electrician so bought opcom from eBay and followed your video and boom! Fired up straight away! 👌 Thank you again brother

[@LMAutoRepairs]

😊 That's great! 👍👍👍

[@bigdaz163]

Great video helped me out after I bought a non running corsa watched video 3 or 4 times and followed step by step and bingo started no problems

[@LMAutoRepairs]

☺ 👍👍👍

[@edgarscelms5306]

Thanks for the video! It helped me. Of course, it didn't work immediately after the instructions that the author of the video, but the direction was the right one.

[@LMAutoRepairs]

😊 👍👍👍

[@BaaarnnzBoyDiagnostics]

Great video fixed many of these by resetting ipc clocks and sdm airbag and bcm body control module and reprogramming and reading and deleting codes sometimes it does appear to come back which requires bcm software update to permanently fix it but not all years can have this done mainly older models

[@LMAutoRepairs]

Thank you! For watching and for your comment! 👍👍👍

[@willd4111]

Hi Christopher, does it matter which order you reset these in? From what ive read its BCM followed by SDM and then IPC..?

[@BaaarnnzBoyDiagnostics]

@@willd4111 hi my friend usually its IPC then BCM then AirBag but sometimes you can get away with just reseting BCM reprogram transponder then reprogram bcm to immoblisher then clear fault codes and turn ignition off for 30seconds

[@IntradeMotors]

What i would have done is first a global scan with a tool that can pull all correct codes like opcom or the GM-tech-2 as that flashing light as far as i know also flashes for automatic transmission faults. Like the implausible torque converter speed codes i had in transmission set by faulty ignition module... on astra z18-xe . That is all i can add for extra tip. Best to always run global scan with a factory level scanner first if possible.

[@LMAutoRepairs]

Thanks! 👍👍👍

[@alonze2005]

With MaxiSys You just needed go to programming and then "Programming transponder-key". You enter PIN and vuolia :) 1 minute job. Anyway, allways super videos and I watch it with cofee! Keep going!

[@LMAutoRepairs]

Thanks! 👍👍👍

[@ukcitizen1158]

Yup. Usually should take no more than 5 minutes from the moment you get into the car.

[@LMAutoRepairs]

@@ukcitizen1158 It was not a race...😊 👍👍👍

[@ukcitizen1158]

@@LMAutoRepairs 😂

[@TommasoBocci]

To prevent this problem from happening again, you need to update the BCM software to an Opel/Vauxhall dealer.

[@LMAutoRepairs]

Correct! 👍👍👍

[@mrgrumpy5116]

are these updates free or do they charge for them?

[@TommasoBocci]

@@mrgrumpy5116 PSA group now charges 35 euro for every software download...

[@sollykhan2385]

@@RMM-wz4qq you need to reread what you have stated here,as it's incorrect, REMOVE the earth 1st, then ( Live + positive lead) refitting is the REVERSE procedure, which means LIve (positive lead 1st) then the EARTH (negative lead) 🙂

[@RMM-wz4qq]

@@sollykhan2385 Yes you remove negative first and then positive last on removal. Of course when refitting it is positive first then the negative to avoid a short, spark or accidental bridging of terminals lol 👍🏻

[@GarysTechSupport]

Thanks for the great video. My sons Corsa D has the same fault after a flat battery, watching the video when you changed from MaxiSys to OpCom where did you reset the engine ECU ?

[@LMAutoRepairs]

If is not available when on the ecu, under special functions or programming, then it is done on the immobiliser module... 👍👍👍

[@wardybasher]

Original battery 👎 these seem particularly susceptible to corruption with even the slightest low voltage. As always spot on video!

[@LMAutoRepairs]

Thanks! 👍👍👍

[@andykelly7321]

I think my car needs this done, just curious what a typical garage would charge to fix this issue? I don't want to get screwed over something I think I could probably do myself given I had the software and cables. Thanks in advance. :)

[@cosmiclass769]

Disconnect negative battery terminal then touch it to the live for 15 seconds then reconnect negative terminal then car will start Thank me later It worked for me and none of these half hour vids to contend with

[@LMAutoRepairs]

It might worked for you... But not always that fixes anything... 👍👍👍

[@karlosmclaughlin8633]

Na doesn't work done bout 30 times still the same

[@LMAutoRepairs]

If the issue is the immobiliser lost on the BCM, disconnecting the battery will never fix it...

[@fabiuzuniversaltunerecudde726]

I have ever start whit reset bcm and reset IPC. Installed new body+ecm in opcom. Tomorrow have a corsa D whit p1632 and p1678 p1679 replaced battery and starter. You think it's not transponder broken?

[@marcelh2341]

Common problem on older BCM-Modules. BCM-Module looses configuration data after flat battery (software fault).

[@LMAutoRepairs]

Yes I know... Thank you for watching!

[@jasondalrymple9547]

@@LMAutoRepairs can i commission you to mend my golf please?

[@Vj-oz1uu]

@@LMAutoRepairs Hi, my friends 09 corsa D battery failed,We Replaced with New battery. After checking modules in opcom blocks showing Security code Not entered, Should i reset all modules and and then reprogram all again also when you cycle the ignition do you take the key out Thanks again

[@LMAutoRepairs]

@@Vj-oz1uu Yes... you can try that... No need to remove the key... just cycle it..

[@mrgrumpy5116]

it may be a common problem but it's a bad thing when a flat battery leaves you with a disabled car .. do we need all this crap in our lives?

[@AHMEDHUSSEN8482]

You're a star ..the only video or blog that would solve my issue

[@LMAutoRepairs]

☺️ 👍👍👍

[@tebogolithako9803]

Hi my good sir,I have the same problem where are you located and how much do you charge for the job like that,my car is Opel Corsa gamma 1.4.

[@gilesmederevonovisad]

Great tutorial!!! I tried to repair my Corsa D with the same problem, by following the exact steps, but unfortunately, I stumbbled at connecting the IPC and ECU. I can't get in the IPC modul to do the programming. The error message in the lower left corner says: ECU doesn't respond... What should I be looking for? To check installation? Fuses.... I saw somewhere that the SDM (or airbag ECU) can be defective (it is under the gear lever where accidentally you can spill some liquid kept in the cup tray ), and that's for the false information about ECU doesn't respond. Thanks for replying

[@iankelly2110]

well done Luis people seem to forget you work too jobs and are burning the candle at both ends i would put that down to tiredness i would say the autel would have done it two if you selected the right program. good job you got it fixed in the end that,s all that matters. thanks for sharing

[@LMAutoRepairs]

😊 Probably... lol Thanks Ian, for watching and for your comment!

[@heyvenommedia]

Hoping i can get a question answered quite quickly, good video! Doing self repair fix on my vauxhall corsa d sxi 2008 plate, most likely the passenger door or just the constant closing and opening doors in the car for tools, as self repairing … i noticed the light in the interior of the car stopped coming on, went back to it 5 mins later noticing just the mini screen of the dashboard which is a clock and radio light illuminating, my question is i know i have an imobilliser in my car, and apparently my car has battery discharge protection, now how do i charge my battery as apparently jump starting my model of car seems to trigger mobilliser from based research, the car will not turn on, no light on dashboard at all, does my car have a safety feature to prevent my battery from going completely flat ? I dont want to trigger mobilliser .. any answers thanks Side note: my cars mobilliser triggered few weeks ago, and my car was reprogrammed, so does this prevent this issue fron happening again

[@LMAutoRepairs]

Hi Some cars are designed to disable certain systems if the battery starts to get to low, bug if you leave the car for too long, there is a drain, or the battery is bad, the battery will discharge completely regardless... There is an update for the BCM to prevent the corruption of the data if the battery gets low, if yours have been definitely updated there is a good chance that that will not happen again, that said, low battery is always a no no... To replace the battery, just disconnect the old one and install the new one... that's all... 👍👍👍

[@bh25jay]

Hello. May i ask you how much do you charge for a work like this? Thanks !👍😊

[@rykuss7041]

Hi Luis I have a corsa d with no crank no start wondering if you can help me. Kt14

[@norbertvas6601]

I got my 2004 vecrta c (immo error) can't start with simular problem followed the steps but on a little different vauxcom and it's started without any faultcode ( my car doesn't like the crouse control)

[@Deanoooooo69]

Great video . But where do I find the code for the key ? Is it the same as the radio code ? Which I don’t have either . Thank you

[@LMAutoRepairs]

No... is not the same code as the radio... kzbin.info/www/bejne/gl66hIuYqc2HeNUsi=-YJyP-yWRmu8dUs9 👍👍👍

[@jasondalrymple9547]

My golf 4 gt tdi is currently stranded on the drive with an active immobiliser. Can you fix it for me. I believe there's an underlying fault, because it wouldn't start even when i would crank and now it does nothing.

[@saitkeley5138]

Hello my friend how are you ? Could you please let Know what version of op com are you using because my one don’t do programming

[@LMAutoRepairs]

I have a few different ones... as some work better on certain models than others... I also have two interfaces with different firmware versions, for the same reason as above... Get a different version and try... I don't remember now which one I was using, unless you can see it on the video... 👍👍👍

[@saitkeley5138]

@@LMAutoRepairs I have this model Vauxhall Opel Diagnostic tool OBD2 Diagnostic OPCOM V1.95

[@saitkeley5138]

@@LMAutoRepairs thank you for replying me back

[@saitkeley5138]

@@LMAutoRepairs so what happened basically Car before was fine when battery died Car Cranking but not starting ,I check fuel pump ignition coil all is fine only thing I found no power come to ignition coil (Vauxhall corsa d 2007 )

[@saitkeley5138]

@@LMAutoRepairs car sometimes start for 2 seconds but cut of and for seconds time I try it’s cranking but not starting,eny idea what it could be ?,also I have no fault code no spana light flash

[@beluxauto5968]

Yes you could have done it with the Maxisys but you went way too quick but I must say that with the OP com it looks less overwhelming . But you got it fixed alright and that's what matters . great Job again

[@LMAutoRepairs]

Yes... I know... Plus, more people will have OP-com... so more helpful in the end... I guess...😊 Thank you for watching and for your comment!

[@beluxauto5968]

@@LMAutoRepairs Also true. Sorry. Didn't think of that. You are absolutely right

[@moneypenny6202]

Thanks boss I fixed mine by following your video

[@LMAutoRepairs]

😊 That's great! 👍👍👍

[@TyreseLifeStyle]

Do you need the 4 digit security code of the car itself in order to get the ECU and BCM done?

[@LMAutoRepairs]

Yes... Thank you for watching!

[@themitch1973]

Hi Great video mate. Thank you/=. Helped a lot. I had another corsa tho with same fault. Went the same process here with modules. Now the car starts up. The spanner light does not flash anymore but it is still present and there is an F on the dashboard. Rear brake lights are permanently on, no speedo and no fuel guage. Electric windows also not working. ECU fault now left ,U0415-00, U0121 (abs can problem)/ central locking also not enabled. drivers door locked , not opening from inside. Any advice would be greatly appreciated. Possibly faulty ABS unit with water ingress but would not be the reason for tail lights, speedo, gauge and door locks.

[@LMAutoRepairs]

Difficult to pinpoint... Disconnect the ABS module and see... Looks like can issues, you need to obviously start somewhere, so, try that... Also check basics, like fuses, connections, earth points etc... 👍👍👍

[@themitch1973]

@@LMAutoRepairs Repaired a broken wire for ABS on connector behind glovebox. Also cleaned out back of main fusebox and reprogged everything. Everything is fine now and no dash lights. Just 1 annoying fault left. Fuel gauge as reading as full. Any advice on that would be welcomed. Thanks for great video and all advice mate.

[@LMAutoRepairs]

@@themitch1973 Just carry one driving... it will soon start to drop...😅 Just kidding... I would guess level sensor in the tank... But, do a needle swip with the scan tool, if works OK, then at lest you can rule out the cluster as behind the issue... 👍👍👍

[@themitch1973]

@@LMAutoRepairs where exactly is the fuel guage check in opcom. I think its a BCM fault because the BCM send signal for fuel guage doesnt it? Got everything else sorted and car running just stupid guage fault left. It was working showing just above red level when car had F problem and flashing spanner. After i reset and progged all modules. Everything works but the fuel guage reads full permanently. Any idea appreciated. Thank you very much for great troubleshooting videos.

[@LMAutoRepairs]

Under active testing... See on live data is there is any readings on the fuel level... I am not sure if the lever is measured by the BCM and then sent to the cluster, or if is done in any other way... I never had to work on that system....

[@Poncho12313]

Just had a 2019 dodge do the same thing .locking and unlocking drivers door with key fix it .

[@D4NIEL010]

Great video thanks. Q what about if you don't have the code please how do you retrieve the code please or do i have to apply to main dealer . Thanks

[@LMAutoRepairs]

kzbin.info/www/bejne/gl66hIuYqc2HeNU Hope it helps... 👍👍👍

[@sollykhan2385]

awesome video, i have a TECH 2 system, however it only works up to 2010, where can i obtain the newer GM MDi software for vehicles from 2010 > to 2022 ?

[@quddusjunaidy7293]

Did it worked for you

[@quddusjunaidy7293]

I am facing the same problem now but not getting in my mind what to do . .

[@sollykhan2385]

@@quddusjunaidy7293 i'm sort of struggling, as any newer model from 2010,is just not able to be diagnosed/coded etc, i need to invest in newer equipment, like the GM MD1/2 with latest software, as this car trade is a total nightmare these day's !!😑

[@LMAutoRepairs]

Google will help you finding GDS... 👍👍👍

[@sollykhan2385]

@@LMAutoRepairs Thank you, Bless, keep up the great work 🙂

[@adilhamich6174]

it is cool to see that corsa comes back to the life again. i have one which starts and dies almost immediately, could it be the same problem? its an 07 1,3 diesel

[@LMAutoRepairs]

Difficult to tell... Scan the car and go from there... 👍👍👍

[@TheTooMelLow]

I am in South Africa my car started this after going to the car wash and we struggling to get it running I want to try your steps just wondering if resetting the ECU and BCM etc won’t make the car loose maps that’s it needs They have tried reprogramming the keys and deleting the faults on Delphi and Maxi but still nothing please advise

[@LMAutoRepairs]

Hi No... the reset only clears the immobiliser system... Will not fix your starting problem... Is not starting correct? Which engine do you have? Thank you for watching!

[@stevepenfold1042]

I’ve got the same problem with my wife’s car and watching you you was a bit to fast for me to take it in I’m going to buy the op com and try to do it could i connect with you to get a bit of information on it please.

[@LMAutoRepairs]

☺️ 👍👍👍

[@stevepenfold1042]

@@LMAutoRepairs thank you

[@platinumautolocksmiths]

This video made me some good money thanks keep them coming 💪🏾💪🏾

[@LMAutoRepairs]

☺️ 👍👍👍

[@amiercornelius9884]

Hi what version of op com are u using? I want to buy op com but im in cape town south africa. I cant find anyone selling it

[@LMAutoRepairs]

I have a couple VCIs... running different firmwares... the software version, the same, I have a few different versions... 👍👍👍

[@shkelqimskeja8510]

Hello i have the same problem on corsa 1.4 . Where are you based?

[@liviu2004]

12:37 the last thing you want to do on such a problem, is to reset ECU and reset BCM in the same time, forbidden to be done by OPEL Technical Service Bulletin.

[@LMAutoRepairs]

I am sure all modules were blank/reset at some point... But I know what you mean.... Thanks!

[@TommasoBocci]

Why?

[@Spw1471]

Hello please could you help. My BCM thinks the security key is wrong. It is the correct one in the cars bookpack and works when entered into other modules. Any ideas please?

[@LMAutoRepairs]

Which tool are you using, The BCM sometimes, only accepts the code unde the correct menu... My experience... 👍👍👍

[@Spw1471]

@@LMAutoRepairs Hello thank you for your reply. I think the BCM module had wiped its memory I have all the same symptoms as this video. I fitted a new BCM and it is now accepting the code. But it will not let me reprogram the existing keys to the new module so I assume I will need a new key

[@LMAutoRepairs]

@Spw1471 OK... If you had this issue, and you replaced the BCM, you need new keys... the old keys would still work if you would do as per the video... Also, you will need to reset other modules, and reprogram them again... 👍

[@Spw1471]

@@LMAutoRepairs thank you so much 😊

[@chrisfaux8469]

Evening, great video, thanks. I have a diagnostic but it does not allow me to do the first step in your video, rest BCM, so I assume the rest of the process will not work, is that correct?

[@LMAutoRepairs]

Yes... Which tool are you using then? 👍👍👍

[@chrisfaux8469]

@@LMAutoRepairs I have a Foxwell GT90

[@LMAutoRepairs]

Ah... I am no familiar with that tool... Are you sure is not under immobiliser or something like that?

[@chrisfaux8469]

@@LMAutoRepairs Its the engine control section, I don't have the option to reset the engine unit. I may have to buy the Vauxcom. Looks like a 10 min job with the corret software. I can do resets in the IPC, bCM, Intrument, Immobilizer but not the Engine!!

[@LMAutoRepairs]

Ah... yes, Op-com/Vaux-com with the correct software version will do it... 👍👍👍

[@justinscorringe6814]

Sitting there frantically scrolling through the special functions in each module...this is the life 😂

[@LMAutoRepairs]

😊

[@eldonstighling5295]

Thank u so much for this great video, it really helps alot. I followed all the step and it went well until I came to IPC Programming, it does not accept the code, what could be the problem? Im from South Africa.

[@MohammedAli-mz2vl]

Hello sir please one question can carprog can read the ECU on this opel on I need online one? Thank u God bless

[@LMAutoRepairs]

Not sure... what exactly do you want to do? 👍👍👍

[@MohammedAli-mz2vl]

@@LMAutoRepairs is to real opel corsa ecu me7. 6.2

[@LMAutoRepairs]

To real? What do you mean?

[@MohammedAli-mz2vl]

@@LMAutoRepairs sorry. I was asking if u used carprog to read opel ecu pin code. And if yes? Do use carprog online or normal one or if u have the original one? Thank u

[@LMAutoRepairs]

Ah... I used it, yes.. normal... no online... But, it cannot read all opel, only some... Check online for a compatibility list... 👍👍👍

[@Goatkage]

I’ve got a problem with my corsa I keep getting told different stuff, one saying reprogram ecu, one saying get new ecu kit then fix immobilser and one saying try fix immobilser first if not just sell because it can cost too much, which do you think is best ?

[@LMAutoRepairs]

To start, what is the problem? What is the background of the problem, how it happened? 👍👍👍

[@wikiliks1187]

Mate Im having exactly same issue with chevrolet orlando.. 2012 diesel 163hp.. Which diag to use for coding? I used acdelco tried most everything it codes the immo, ecu everything successful anti theft stop flashing, but keeps constant ON And car wont start , any idea?

[@LMAutoRepairs]

Which codes do you have? Do have communications with all the modules? 👍👍👍

[@wikiliks1187]

@@LMAutoRepairs on ecu the only code is p0633.. "immo key not programmed" I have changed ecu .. and still the same ac delco tds says ecu successfully "replaced and programmed"... and learn immo on ecu.. gives successfull.. but still error keeps staying there I have bcm pin.. but still no luck, also as i know opcom dont work on chevrolet? Ecu Is DCM3.7ap.. sh27.. based

[@LMAutoRepairs]

The while procedure need to be done correctly, otherwise will not work... Also, if you replaced the BCM you need new blank keys...

[@wikiliks1187]

@@LMAutoRepairsi have old BCM with its keys.. Bcm is ok.. But ecu is replaced witu "used" ecu and need to "reset" or "virginise" it ? If im right?

[@LMAutoRepairs]

@wikiliks1187 That's correct... But to virginize the replacement ecu you need the original pin from that ecu... not your current pin...

[@irishniall83]

Hi love your videos and have helped me out a few times. I have come across a Corsa d 1.2 2008. Battery went dead like this and won’t start. Got the security that lets me in to the BCM but says wrong code for the ecu so can’t reset. It’s been scrapped now for £300 and I’m tempted to buy. They was no communication with the ICP or airbag module via opcom. Is it worth the buying for £300? Would love to talk to you about this if possible?

[@LMAutoRepairs]

Possibly... I would say it depends on the overall condition of the car, and more important, how much has been messed with! Parts for these are not too expensive, and widely available... Thank you for watching!

[@irishniall83]

@@LMAutoRepairs yeah my thoughts exactly. Going to look at in again in the morning and give the whole car a going over. If it needs too much I’ll walk away as I’ve no room to work on a car.

[@LMAutoRepairs]

👍

[@Vj-oz1uu]

Hi there,we had comms with Engine Ecu Which showed no security code programmed, checked all modules ipc bcm sdm which showed same faults, just before resetting i lost comms with Engine ecu on opcom anyway i reset all modules and reprogrammed ,but Ipc Bcm modules showing invalid data from bcm and security code not programmed, the motor is a Corsa D 09 1.3 z13dtj , all modules accept the s/key could no communication with engine ecu be the issue any advice would be very helpful

[@LMAutoRepairs]

You need start by sort the issue with the no comms with the engine ecu... otherwise the programming will never work... Check the basics... power and grounds... can lines etc...

[@Vj-oz1uu]

@@LMAutoRepairs Hi again power and grounds were fine there was No switched ground from Ecu to Relay ground, Ecu just came back from repair,i reset Ecu. Engine showing immobiliser function programmed Yes Wow in measuring block.Now iv reset Ipc and programmed and sdm and cycled key, with the correct security code which it accepted and showed reset completely successful and security code successfully programmed to Sdm but in measuring block its showing Security code status -Not Entered any help welcomed Car Start and runs and No fault codes cheers

[@timmytab2836]

What is this 'security code' that is put on the software? Where does it come from?

[@LMAutoRepairs]

You should have it on the car security card/pass... If is missing, dealer will sell it... There is other ways to gat the code as well... 👍👍👍

[@g19aby]

I have the exact same issue. Thank you so much.

[@LMAutoRepairs]

Hope you get it sorted! 👍👍👍

[@ljr1981]

Hi I'm getting p0340-2 low circuit on my camshaft sensor I've replaced the sensor but still coming up with the fault do you think this is the ecu

[@LMAutoRepairs]

Hi First, check wiring.... from the sensor to the ecu... check power and grounds at the sensor... If the sensor is an after market, get a genuine one... If all good, possibly the ecu... Thank you for watching and for your comment!

[@ljr1981]

Hi I've checked the wiring but still coming up do you think it could be the ecu as I've just noticed it's got loads of oil on it. many thanks

[@MahmoudMahmoudi-r3z]

Hello L M, i have a corsa B which my daughter broke in an accident. She crashed the car inte the back of another car at a speed of around 30 km/h. Without placing the key in the ignition, three lights lit: oil symbol (red), batteri symbol (red) and engine (orange). The batteri drains very fast. It drops from fully charged 13.6 volts to under 12.5 volts in only five minutes. After every try i disconnect the battery and recharge it for the next try. The car cranked the second day after the accident but it doesn’t any more. It seems that disconnecting, recharging and then reconnecting the battery burns or damages new elctrical parts (relays?) every time i try to start the car with fully recharged battery. Could you please help me with following questions? - is it the immobilizer that has to be reprogrammed? - do relays break at collision? - i could perhaps stop or minimize battery drainage by pulling out fuses for wipers, headlights, brake lights and one or two other things that still power from the battery but is that because of the immobilizer? - what diagnostic equipment would you suggest me to buy? Thank you for your help.

[@LMAutoRepairs]

Get Op-com... cheap and ideal for that... Check that impact has not crushed any wiring behind the bumper etc... Check that everything is correctly plugged in... Check the inertia switch... 👍👍👍

[@MahmoudMahmoudi-r3z]

​@@LMAutoRepairs Hello L M, thankyou so much for your attention and quick answer. I did actually find somerhing that looked like a sensor (probably attached some how to the radiator) now just hanging unattached to anything. I Will check again. Thank you for your advice on getting an Op-com code reader. I Will. And now a new question: i looked everywhere for an inertia switch in the car which is from the year 1999-2000. Didnt find anything. Do These B Corsas have inertia switch at all? Where would it be more likely to be located/found? Thank you so much again for your help and have a good day.

[@LMAutoRepairs]

I am not sure that there is one on that particular car... I mentioned it to brain storm some options...

[@MahmoudMahmoudi-r3z]

@@LMAutoRepairs Thank you for your answer again. I have looked for it, googled a lot and nerver found anything. I Will try again. I Will however come back to you when or if i get an Op-com error code reader and need instructions on using it. Thanks for all your replies and a very useful video. Have a very good day. MM

[@LMAutoRepairs]

👍

[@locoteyo23]

my ecu does not reset and gives me the following error message:0x7F,0xAE,0xA4 RESET FAILED¡ WHAT MAY BE HAPPENING HERE? PLEASE HELP ME I HAVE THE OPCOM UNTIL 2021 OF FAMTONMEL

[@samihagos628]

Hi..I have problems after rest and programing body control module The.feul.and.speed meter was stopped In instrument cluster. Did you have any idea.. Thanks. Sami

[@LMAutoRepairs]

Just reset and program everything... As I did on this video... Thank you for watching!

[@engeneer_ru5827]

In some very severe cases, the firmware may go bad. You will need to reprogram the MCU chip.

[@orkhanmamedov8903]

Hi there! My Zafira 2004 1.6l faced such a problem, cranks but not runs so it indicates that there is immobilizer issue, but it happened immediately as owner says there wasn't any battery flat situation.So i wonder if i can just reprogram immobilizer that has 35080 eeprom with just any programmer like cg100 or carprog is enough ? Regards!

[@LMAutoRepairs]

Hi Have you actually scanned the car to confirm that the issue is actually the immobiliser!

[@orkhanmamedov8903]

@@LMAutoRepairs Yes, done. Thanks for the feedback!

[@orkhanmamedov8903]

@@LMAutoRepairs is it posible?

[@LMAutoRepairs]

What I meant is, if you scanned the car, to see exactly what the problem is... Crank no start, does not mean an immobiliser problem...

[@orkhanmamedov8903]

@@LMAutoRepairs but immobiliser flashing and dtc demonstrating on immo

[@chrish3193]

Hi there. Are you based in ashton under lyne. If so need your help. Thanks

[@LMAutoRepairs]

No... I'm not...

[@petergwatts9037]

I have same car with same symptoms but after ringing more than twenty car electricians can find none here in Brighton with op com. One also said will cost more than the value of my car to repair! What should I do wizard mechanic?

[@LMAutoRepairs]

You don't even need Op-com Any other tool that supports the immobiliser programming will do the job... You rang 20 electricians, but you rang the wrong ones... Try someone else...😉 Thank you for watching!

[@petergwatts9037]

@@LMAutoRepairs Wish you were here. Tried almost everyone. Been sending link to your excellent video challenging them to have a go themselves. Great KZbin video, guarding people against ripp off merchants and teaching at the same time. At £17 on eBay I would by opcom myself only my laptop is also currently broke!

[@petergwatts9037]

Hey this Corsa has created a tremendous amount of attention due to its custom environmental armour, see video. kzbin.info/www/bejne/rZfKhYWfecx2hMU If you are anywhere near Brighton with your laptop in the next few days it would be great if you could pop by and resusscitate the machine. It is a legendary vehicle. Peter

[@inked5145]

Good video as always. Shame you didn't use opcom from the start as its something most people have. Also if you have this problem in the future on any Vauxhalls, something to try is to disconnect the negative battery cable and touch it to the positive terminal for a few seconds. It's a common problem on Vauxhall's when the battery has drained.

[@LMAutoRepairs]

Thanks! 👍👍👍

[@petergwatts9037]

You anywhere near Brighton, my car is dead with this flat battery glitch

[@JuanRodrigoZambelli]

Hi, I have a problem with my corsa D. The problem is that I can’t correct the mileage. I have change the cluster and programmed it, but I can’t correct the mileage, could you do a video or tell me how to do? Thanks

[@LMAutoRepairs]

When I have one, I will do it... I might actually have a spare cluster... I will see what I can do... Thank you for watching and for your comment! 👍👍👍

[@carltonlane8931]

Crazy man well done, yes we learned,as always.enjoyed.

[@LMAutoRepairs]

LoL Thanks! 👍👍👍

[@saitkeley5138]

Do you guys have any what’s-app group? Sometimes you need second opinion,please let me know 🙏

[@manchiroju5590]

Hi I have park pilot malfunction. Could you able show me how to reset. It was working suddenly happened.

[@manchiroju5590]

Can we remove negative battery terminal and leave it for 10 min and reconnect will reset park pilot

[@odys-md3zv]

Hi there Can I ask you if you have a garage and if yes where are you located? Thank you

[@LMAutoRepairs]

Hi No... this is just a part time for me... 👍👍👍

[@odys-md3zv]

@@LMAutoRepairs Hi and thank you for your reply. Is there any chance that you can have a look at my Corsa D if you are local?

[@caponenoreaga6028]

How much do you charge to fix this?

[@Laura-sy8wt]

Hi, please help me, I’ve got the exact same problem. This happened to me 3 hours drive from home, I was stranded with 2 kids. I’ve gotten back home and had my car towed, seems like no garages can help me, they have referred me to a Vauxhall garage who are already charging over £100 just for the investigation, that’s without even fixing it. I’m desperate to get my car fixed I’ve broken down alone with two toddlers and I can’t afford they Vauxhall prices they are trying to get every penny from me. Please help or do you know if most garages SHOULD be able to do this? Thanks

[@LMAutoRepairs]

I am not going to say that most garages will be able to do it... With the right tools and the know how, definitely most should be able to do it... Try an independent vauxhall specialist or something like that... Alternatively, get old of Op-com, and you will be able to do it... Hope you get it sorted... Thank you for watching and for your comment!

[@dasautoberlincity2903]

Hi Bro, I cannot start my Opel Tigra. There is no fuel in front of the injectors, No matter what I did, ignition lock changed or immobilizer changed or speedometer changed. Is there no way that you can bridge the whole thing without immo? Can you please help me thanks :(:( Es geht um eine Opel Tigra 1.8 - 2006

[@LMAutoRepairs]

Possibly... depends on the ecu... But, have you scanned the car? Try to understand what the issue is before go down that route... It might be something simple! 👍👍👍

[@mohitl1697]

Is it same procedure - i need to replace my BCM with a new one... resetting all modules with right security code then reprogramming with key and vin number

[@LMAutoRepairs]

Yes... just one small thing... if you are replacing the BCM, I believe you will need new keys.... Thank you for watching and for your comment!

[@liviu2004]

@@LMAutoRepairs old keys will program fine.

[@LMAutoRepairs]

@@liviu2004 Are you sure? Program second hand keys?

[@liviu2004]

@@LMAutoRepairs If he brings SH BCM, he can program car keys to it, no problem.

[@LMAutoRepairs]

@@liviu2004 That's good to know... some makers you can't do it... once a transponder is programmed, you can't do it again... at least under normal circumstances... 👍

[@rabsonbanda7200]

i was Diagnosing the opel astra-H then it's giving me this fort's code B3040 in immobilizer B3049, No Communication with Abs. does this need to be programmed

[@LMAutoRepairs]

I would check the reason for no communication with the ABS first... Can you communicate with the ABS?

[@rockysingh8922]

I have a Vauxhall Zafira and I want to get my security code. Because I didn’t get and folders or paper work with the car. I bought it from a insurance company. And I want to Program a key because the key I’ve got with it has no central locking buttons on it, it’s just a standard key with a chip, I want to program a original two button key. I have Opcom. But its not letting me get the security code. Is the a way u can tell me how to get it, without going to the Dealership.

[@LMAutoRepairs]

Hi kzbin.info/www/bejne/gl66hIuYqc2HeNU Hope that helps! Thank you for watching!

[@kwakuemma8382]

What software and tools are you using and where can I get some?

[@LMAutoRepairs]

Op-com... A quick google search and you will find it...😉 👍👍👍

[@asimgeeasimgee]

Nice job sir I ask which software use to programming can you tell me plz

[@LMAutoRepairs]

OP-com... Thank you for watching!

[@humberstonemotors5778]

quick question how come u did not reset and program the bmc

[@LMAutoRepairs]

Not needed... Thank you for watching!

[@alexiantwisty]

I bought an opcom to do this, and I have my car pass but it says the security code from the car pass is incorrect?

[@LMAutoRepairs]

If the car pass is correct for the car, and the car has never been messed with... like modules replaced as a set from another car, try a different software version... Some are a bit problematic... Hope that helps... Thank you for watching!

[@dorinfarcas9263]

Hi there, I'm having the exact problem (same faul codes) with a Corsa d. I got the car like that but i think someone try before and messing around. When i try to resetting the ecu with the right pin it tell me is wrong pin but i check the mileage, vin etc.. it looks like is genuine one from the car. To others module pin is okay. I did without resetting the ecu and still the same nothing changed with same fauls. Any ideas 🤔? Thks

[@LMAutoRepairs]

If the security timer not activated? 👍👍👍

[@isalmankhan1]

Thanks for sharing Bro👍 Very helpful video, would Love to see the process performed with MaxiSys, maybe in near future😉

[@LMAutoRepairs]

👍👍👍 Thanks!

[@petergwatts9037]

Had a bloke try and fix mine with MaxiSys and he could not do it. Car still dead and it's also my business. Waiting for op com to arrive and still searching for a mobile mechanic here in Brighton

[@DavidPhetisang]

On my Corsa utility 1.4 it show the spanner sign and it doesnt start even the central lock doesnt lock when press it from inside and remote key i must press it twice before i open the door

[@LMAutoRepairs]

Scan the car and go from there... Obviously check basics first if you haven't yet... like fuses, connections, etc... 👍👍👍

[@paulmayou370]

great job as always i have that software and the obd unit but i carnt get my obd to work i`m running windows 10 so would that be the issue if so can i run it on windows7 cheers

[@ukcitizen1158]

Windows 10 shouldn't be a problem. Most likely the lead is an issue.

[@paulmayou370]

UK Citizen bloody brand new too grrrrr lol 😂

[@SolRebelll]

Thanks man!!! From Siberia

[@LMAutoRepairs]

👍👍👍

[@bbtuning9918]

Can this be done with autel maxicom mk808?

[@LMAutoRepairs]

Never used that tool... But, i believe it can... Thank you for watching!

[@3rblitz]

Correct me if I'm wrong, the security code that is entered before the reset is the one stored in the unit itself, after programming it learn the pin stored in bcm? so if u have a 2nd hand unit u have to know the pin of the 2nd hand unit for reset? if i dont have pin op-com can read the pin stored in the ecu?

[@LMAutoRepairs]

In this case the pin code is the same all the way long... as is the pin from the car.. If you want to install a second hand module, yes, you need the original pin from the module to reset, and then the pin from the car is going to be installed on... Thank you for watching and for your comment!

[@3rblitz]

@@LMAutoRepairs Thank You for answer, great job!

[@engeneer_ru5827]

Hi Louis! You are very cleverly trained to work with Opel. A lot of these cars are next to you. Really need to reset all all the blocks? BCM and ECU is not enough? Is there a need for a reset of SDM and IPC? I look with interest, Denis!

[@timmehlittleloud2251]

It's not so much the pin in each module that gets screwed it's the environment identifiers. Sometimes you can get the car to start just by programming a couple of modules but mostly you need to reset each module and reprogram so you are 100% that everything is matched.

[@LMAutoRepairs]

Hi Possibly... Airbag on these are also part of the immobiliser system... So, to make sure all the environment identifiers match, better to just do them all... only a couple minutes extra... Thank you for watching and for your comment! 👍👍👍

[@engeneer_ru5827]

I understood your answers! Thanks!

[@eFaZeHD]

Great video love seeing the Vaux com stuff! Do you have a link where I can get the same tool? :)

[@LMAutoRepairs]

Have a quick look on eBay... Thank you for watching and for your comment!

[@nathan9500]

I had this same issue. Got told my car had to go to Vauxhall to reprogram, then suddenly a week later of just sitting there the engine starts again. Any ideas?

[@LMAutoRepairs]

First time I heard that the data corrected itself... Perhaps, and that is me guessing, your issues was not exactly the same as the one on this video... 👍👍👍

[@georgehill9636]

Hi where are you based .

[@tinochoolun4397]

HI it's a grazy job [where you have got the pin code?]

[@LMAutoRepairs]

The car had the security card with it... But the Maxisys can actually retrieve the pin code on the Corsa D... Thank you for watching and for your comment!

[@tinochoolun4397]

@@LMAutoRepairs thanks

[@orxanmamedov5795]

Hi there! Which op-com version yu use?

[@LMAutoRepairs]

Not sure... 2012 or something like that... but I have a couple different ones installed... 👍👍👍

[@orxanmamedov5795]

@@LMAutoRepairs But hardware

[@orxanmamedov5795]

I can read pin/security code with my cg100 prog 3 full and UPA USB for Motorola MCU processors like astra c CIM 9s12, i want to reset reprogram ECM ,CIM, IPS, immo, for adapting new multi steering room , Boardcom immo etc

[@LMAutoRepairs]

1.39... I also have a second one flashed to firmware 1.45... or something along those lines... 👍👍👍

[@LMAutoRepairs]

@@orxanmamedov5795 Op-com is not the tool for that....

[@nickycarver4542]

Can you send me a link for a opcom please thanks

[@stukilowabunia]

Sir, Opel corsa cdti 1.3, 2008 Car does not respond. Battery full. Abs, engine, service, exclamation mark, battery. Starring wheel not responding. Current mileage disappearing turning into F

[@LMAutoRepairs]

When you say not respond, you mean to the scanning tool?

[@stukilowabunia]

@@LMAutoRepairs no Sir. If I would turn the key to start engine, the car / engine doesn't respond

[@LMAutoRepairs]

The F most likely means the ecu is offline... Unless that is the automatic... which in that case might be the actuator... common on those... However, without scanning the car etc... it is only guessing...

[@stukilowabunia]

@@LMAutoRepairs no, the car is manual.

[@LMAutoRepairs]

@@stukilowabunia OK... in that case looks like the ecu is off... Check fuses etc... I can't really help you much further...

[@robertoherrera8024]

Hello friend..how can I download the manual?

[@LMAutoRepairs]

Which manual are you referring to? 👍👍👍

[@rahmatalbugisi3454]

One question how to get a code number? How if happen other car ?? Thanks

[@LMAutoRepairs]

Code number? You mean the pin code of the car?

[@rahmatalbugisi3454]

@@LMAutoRepairs yes pin code of the car.. Way to geting it?

[@LMAutoRepairs]

@@rahmatalbugisi3454 kzbin.info/www/bejne/gl66hIuYqc2HeNU

[@rahmatalbugisi3454]

@@LMAutoRepairs thanks my master

[@Vj-oz1uu]

Excellent amount of information Keep it Up

[@LMAutoRepairs]

Will do my best...😉 Thanks!

[@electronic7979]

Very good video

[@LMAutoRepairs]

Thanks! 👍👍👍