He’s like the Bob Ross of auto restoration, makes everything sound smooth. That’s a compliment
@L.O.C.19903 жыл бұрын
Haha 🤣 bob ross
@darthbuster3 жыл бұрын
Now we are going to install a "happy little dash pad"
@bravobear18443 жыл бұрын
@@darthbuster lol
@Doveproductions73 Жыл бұрын
i was actually just watching this video and i was going to come comment that he was the bob ross of cars
@peterbullock-vg6yt Жыл бұрын
These videos are so good, really giving me the confidence to tackle my own 84 K10 in my garage. Huge amount of value here, thanks you guys.
@xtremevue3 жыл бұрын
I love LMC!!!! Their catalogue is like getting the Montgomery Ward Christmas catalog
@stephensmith30185 жыл бұрын
ive been needing to replace my 1977 Suburban dash for more than a decade, In watching you its soo simple i feel silly for putting it off for so long! Thanks for the video it is getting me to do my dash!! Its gonna look great!
@williamb4542 жыл бұрын
I agree
@ventgoblin8080 Жыл бұрын
@@skylerhagen9960 and the new dash pad after a couple of years in the sun
@jesust2556 Жыл бұрын
We need an updaaaaate
@JavierSolis-n7c10 ай бұрын
I know it's been awhile since you mentioned that you going to change your dash can you post what it looks like and did you have any problems installing thanks
@RayMainBagpiper4 жыл бұрын
Would be cool if you guys did an end screen listing all the screws and spring tabs that would be needed to do a complete install with new parts.
@impalaSS65 Жыл бұрын
Yes!
@MisterModder1235 жыл бұрын
These videos are awesome. It's not completely full of sponsored bullcrap and it's very to the point in helpful. Awesome job guys!
@jayferrante1434 Жыл бұрын
And the guy doesn't look like a reality show character with a bunch of tats, and backwards hats with glasses on them.
@lane89326 жыл бұрын
Oh my god that whole table would be a dream kit to have . Not anywhere near in the budget for a single dad of two but I'm gonna dream and drool through this whole vid lol
@cnkilts5 жыл бұрын
Rusty Irons same here. Over $1000 in parts there. Love my truck but that's not in my budget.
@dylanwaggonersdad50284 жыл бұрын
Agreed
@wildbill56703 жыл бұрын
Do what I do. Buy a thing every once in a while till you have all you need.
@inspectorgadget7753 жыл бұрын
Exactly the information I needed. Just bought an '81 Scottsdale. Will be doing the interior restoration soon. Thanks!!
@bobjohnson2920 Жыл бұрын
Awsome video! I've been watching for years. I came here to see what screws hold the center vent housing to the cluster trim. LMC doesn't show them anywhere in their diagrams and they didn't come with the new vent and housing. The guy who previously owned the truck died and I'm trying to finish his frame off resto. Beautiful truck, but what a nightmare. Buckets of bolts, nothing is labeled etc. But I want to thank your camera guy for the close up shot of the screws! I found them in one of the 5 buckets of bolts lol
@gordonstroup882 Жыл бұрын
Thanks LMC Trucks, and thanks Kevin T. for showing us the "how too" on the dash.
@roystoys30994 жыл бұрын
I Unbolted The Steering Column (2 Bolts) To Give More Wiggle Room On The Gauge Bezel & I Replaced ALL The Dash Lights While It Was Out. Easy Life When You Do It Right The 1st Time!!
@fredmartine6744 жыл бұрын
I'm working on my 1986 Silverado to get it back on the road, I got the engine running but need to work out the bugs on the carburetor. Still need to replace or rebuild a few more stuff on the truck. Dash replacement video was informative, I probably likely replace the dash later on. Keep loading up videos..
@whiskeytangofoxtrot45236 жыл бұрын
All those brand new parts LMC sells and he reinstalled that beautiful new dash and bezel with the 31 year old rusty screws! C'monnn, I'm sure LMC sells that screw kit, right?
@hiramtorres71784 жыл бұрын
Josef Daniel fr
@klassenkustoms99324 жыл бұрын
Using old screws seems so odd to me aswell
@osmanpena46433 жыл бұрын
You are the Bob Ross of installation videos. Thank you
@AJAXXX4207 жыл бұрын
This video not only gave me instructions on how to replace my dash but i can buy it from the catalog too!! This is going to make this job super easy! Thanks!
@azarizcowboyaz75112 жыл бұрын
He makes it look super easy. I can assure you it is NOT.
@ronaldrutledge19264 жыл бұрын
I have been looking the last year to find out who sold the dash glad to hear they have it
@jedihair8 жыл бұрын
Thank you! Excellent instructional video, Kevin Tates is the man. I finally know how those damn dash clips attach to the pad.
@johansanchez91007 жыл бұрын
Awesome
@carriekraemer84245 жыл бұрын
This guy is the Bob Ross of cars
@enermaxstephens10512 жыл бұрын
I had one of these kinds of dashes, and it's a big thick blob of urethane. A good deal heavier than the stock one. It did not look factory. All fine and well for some people who don't mind, but I wanted it to look as close to stock as possible. So you really need a vinyl dash to accomplish this. Your factory dash can be recovered with new vinyl, and it fits easily and will not be difficult to reinstall.
@markdaniele45395 жыл бұрын
Just bought a 1979 C-10 Silverado so great video thanks.
@josephdeffendoll30565 жыл бұрын
Tetz moving down the ladder. Hello from Franklin, TN.
@seventimechamp36108 жыл бұрын
on the head light switch knob removal, if you pull the knob out as if you were turning the head lights on then mash the button down the knob will pull the rest of the way out. don't forget to disconnect the battery or the head lights will be on and run the battery dead.
@robertoleeva9857 жыл бұрын
I think that this is a great idea.. now that I can watch these videos, I'll be buying alot more stuff from LMC. THANK YOU
@markit62257 жыл бұрын
i ordered a LMC dashboard aka Dash pad. when putting on the bezel i had to cut the bezel from the upper left side. i did my research and i got the correct part, but dash pad is very bad built.
@darthbuster3 жыл бұрын
wish LMC would come out with a replacement dash for 89-90 Ford Ranger/Bronco ii. Kevin makes things look so easy...
@CharlieMoDank14 Жыл бұрын
Thank you. For the parts and instruction video.
@Lmctruck111 ай бұрын
You're welcome!
@luke_lewis16304 жыл бұрын
Everything laid out on that table is more expensive than my truck 😂
@darthbuster3 жыл бұрын
Ha! I know right?
@freckles37053 жыл бұрын
I've been trying to find door bezels for my 1992 s10. They are not in the catalog so not all parts are available.
@keithhall400911 ай бұрын
Every time I order from LMC, I appreciate how affordable the parts are. You might be surprised what your square body is worth these days!
@prestonfreeman84439 ай бұрын
😂😂😂 You got that right my friend 👍
@hearsejr5 ай бұрын
Lololol
@billybones1837 Жыл бұрын
Thanks very much that’s a very helpful lesson, do you have the same video for 1978 GMC?
@TCO12166 жыл бұрын
the radio knobs are sick. all of it great job!
@javiercruces6 жыл бұрын
Can you show how to replace 1994 chevy dashboard please and thank you sir
@Bigrich0g4 жыл бұрын
You made it look so easy puting the dash retainer's in busted my fingers up and 2 day's later
@dadsc105 жыл бұрын
thanks for this video, I have my dads 82 c10 custom deluxe that he bought new, in beautiful shape but dash is cracked and I have a fabric cover on it, but now I will plan to replace the dash this coming summer , looks easy, thanks
@dannybordelon24947 жыл бұрын
i have a problem with the upper right hand vent, the adaptor on the rear of the vent hits the dash cover making if impossible to remove without lifting the dash cover up, i recently had a radio installed ( due to my bad back ) and he broke off the fan switch. since he did such a poor job of it I had to fix his mess and ran into that vent problem. I watched your video and if went as somth as silk., so much for Murphy's law.
@shanedresser54317 жыл бұрын
Silver Dollar City!! I used to go there when I was a kid! love it!
@danithaman46105 жыл бұрын
Do you guys have a video of swapping manual transmissions in these trucks?
@Lmctruck15 жыл бұрын
Sorry we do not.
@lorwinnorlin5713 жыл бұрын
Gees! Id like for him to do my 85 gmc window rubber, new felt lining, dash pad and headliner. Makes it look so easy lol Kevin is awesome! Thank you very much for doing these vids. Now, if we could just get these lmc parts in Canada in a timely matter, that would be great!
@bnmartell3 жыл бұрын
When are you going to give us 73-79 ford truck guys some love?
@Fishyboy444 ай бұрын
These videos are so helpful thank you guy's 🎉🎉
@Lmctruck14 ай бұрын
Our pleasure!
@pixel_entity53524 жыл бұрын
How about a series on the 1st generation s10/s10 blazer? Still a popular vehicle and I started the refurbishing on my 87 s10 blazer.
@connorellis25327 жыл бұрын
hey could you do one of these on the molded dash covers in the catalog?
@stanzuray7 жыл бұрын
Thanks for all the work on the videos. Got a 86 CUCV and trying to keep it going and in nice shape as best I can. Lots of good info. Stan
@Herlss Жыл бұрын
I know you posted this comment 5 years ago. I'm sorry, but I'm about to buy a CUCV next week and will be doing a restoration. It has no AC so it just has the solid silver trim with no vents, but I cannot find a full sized dashboard replacement without AC anywhere. Can you just put the silver trim over the AC holes?
@Redeemed77 жыл бұрын
Thanks for the video. I noticed a Silver Dollar City key chain. Where are you located? Also, I've got a 76 Chevy k20 with 83 cab what model years dash can i buy to replace mine?
@Pushyhog5 жыл бұрын
What company does 81’ f-100 pick up truck??? Please
@dillinpicklesworth56983 ай бұрын
I shrink wrapped my original dash 10 years ago, still looks like I did it yesterday!
@lloydheller47297 жыл бұрын
Can you show how to replace leaking vacuum line under dash on my 78 c20?
@humberto1972m5 жыл бұрын
soy un amante de las chevrolet pickup silverado c10 de los 80s.. trato de recopilar cualquier ayuda en mejoras videos recomendaciones etc.. gracias por compartir tu video...
@gsmith2072 жыл бұрын
awesome! huge help Kev! restoring my Gramps 1988 GMC 7000 series TopKick 10 wheeler dump truck. Same cab. bought all my stuff at LMC from carpet to window seal kits and all interior trim pcs. Cant wait to finish it! thank you
@TeamTopKick Жыл бұрын
How did it go? The floors on the topkicks is a little different than a C10
@gsmith207 Жыл бұрын
@@TeamTopKick she came out like a parade truck! I have a video of it on my KZbin channel.
@TeamTopKick Жыл бұрын
@@gsmith207 I will check it out
@robertcline9170 Жыл бұрын
Good job can u make video on body panel replacement without a welder
@guym55785 күн бұрын
The corners of the bezel into the new dash pad doesn't look like you did it correctly, very loose like its not attached well at the 10:35 mark
@BYROOBAN4 жыл бұрын
Please your help where I can get the plastic tapestry that is seen in the video in the minute 8:12 thanks for your help greetings from Quito Ecuador
@wadewright35566 жыл бұрын
Why did they show the aftermarket gauges then not install them. I'd really like to see how they look installed.
@marthabibby73466 жыл бұрын
What dash gauge bezel and gauges are you using? I want the exact ones.
@MajorTendonitis Жыл бұрын
This sure brings back memories. I would have sworn my 84 gmc dash pad had a screw on the side to remove also ?
@gasratzcustoms4 жыл бұрын
Need to get one of dashboards!!
@danielstrachan8988 Жыл бұрын
I have a 1984 c20 and am looking forward to up dating my interior to looking like new😁😁👍👍
@getfitzd5 жыл бұрын
@ 1:28 you can see the camera guy. I'm glad he got his few seconds of glory XD
@coledettman67178 жыл бұрын
Can you guys do a vent wing rebuild?
@Lmctruck18 жыл бұрын
We'll pass your suggestion along! Thanks Cole.
@19ADAM807 жыл бұрын
LMCTruck Yes please do the vent Windows...
@TexasNova6 жыл бұрын
kzbin.info/www/bejne/bJ-QfZaabteSoNE
@wadeatkinson49047 жыл бұрын
8:58 "easy and slow take your time" whack whack whack! 😂
@lastliks997 жыл бұрын
haha I started laughing when i read this. was waiting for him to grab a hammer and beat that poor thing into place!
@BYROOBAN4 жыл бұрын
Por favor su ayuda donde puedo conseguir el tapiz de plástico que se observa en el vídeo en el minuto 8:12 gracias por su ayuda saludos desde Quito Ecuador
@ClassicSilveradoTrucks3 жыл бұрын
I have an 85 C10. If I purchase the dash bezel along with the aluminum face, how does that attach to the dash bezel? Is it glued on or does it come with 3m tape? Thanks
@jayfernster2 жыл бұрын
Wish my dashed looked as good as the old one you took off 😅
@DavidSilva-sv1gs7 жыл бұрын
Hello friend, congratulations for your videos are very helpful, I have a pick up chevrolet 1988 I would like to know where I can buy the parts, ecxelente work
@Lmctruck17 жыл бұрын
David, we do offer parts for an 88 Chevy Cheyenne. You're welcome to view the parts catalog at the link provided below. www.lmctruck.com/icatalog/cd/t.aspx
@richardspears7363 жыл бұрын
@@Lmctruck1 dashboard
@yamahaguy17325 жыл бұрын
What do you do when previous owners glued aftermarket dash pad to the dash
@heathcalvert88205 жыл бұрын
Do you got videos on 2000 and on about Dodge Dakota trucks
@Lmctruck15 жыл бұрын
Sorry Heath, we don't have any right now. We are working on more videos!
@cmscms1234564 жыл бұрын
WOW Chevy actually did some SMART DESIGN there, with an easy to remove dash pad... That engineer must have come over from Dodge/Plymouth.
@richardadams13377 жыл бұрын
You were correct with the way you replaced your headlight switch as shown. You would not be able to remove the screws that hold the air duct in place with the bezel on because it covers them up.
@marqueswilsonn5 жыл бұрын
I guess lmc isn’t going to make any dashboards for the early 90 Silverado
@kennethtibbitts66417 жыл бұрын
MAYBE CHECK AND REPLACE DASH BULBS IF NEEDED SINCE DASH IS APART
@randygarza30016 жыл бұрын
They do not have everything you can ask for. I’m looking for a bezel and dash for a 2001 Chevy Silverado 1500. They do not carry it. They don’t even carry the bed caps for the step side bed. I don’t understand. They have parts for a 1987 truck, but not for a 2001. Please explain and please guide me in the direction where I can buy one.
@mackpearson53726 жыл бұрын
Randy Garza they’re a classic truck website. What your trying to find there is like going to a website for mustangs and trying to find Camaro parts...
@brettkoeshall23256 жыл бұрын
Nice super cool restoration man.
@roberthollis68846 жыл бұрын
I’ve got a 76 two-tone green. Looking for a green dash can I get this from lmc?
@DizzyDave266 жыл бұрын
Could someone post some information on better screws (size and # needed) im doing this project soon would be very helpful.
@chastblind76065 жыл бұрын
Any leads? I recently picked up a 82
@MrEPic19623 жыл бұрын
Great Video but while replacing my dash with this unit on an 01 1500 i'm having trouble with the two connectors that plug into the back of the interior fuse panel that are very difficult to get to, one is blue and one is white; anyone know how those two release?
@hazardbrain24 күн бұрын
Check out chevy ninety four starcraft for your mirrors and whatnot?I got a nice set off 14 my older vehicle to upgrade
@laurensiemens14365 жыл бұрын
I like the gauge package
@AnMadreMor7 жыл бұрын
Thanks for making this video .I'm in Canada and I bought most of the stuff That I need for my '87 Chev 1/2t 4x4 but didn't quite know what to do about the dash, now I do . Now if you only could do something about those vent windows??
@Lmctruck17 жыл бұрын
Glad to hear it was helpful!
@79c156 жыл бұрын
I get a kick out of that...1981-88 is the same, only thing different between 81 and 88 that's some what major is grille changes
@winkler87ksu6 жыл бұрын
I have a 86 truck you can do all the how to videos on.
@chadwillardson1480 Жыл бұрын
Having trouble fitting the bezel in, dash seems to be to small. Any pointers?
@Lmctruck110 ай бұрын
What year, make and model are you installing on?
@thetasteofluck4 жыл бұрын
great show..keep up the great work....
@shannonlove61563 жыл бұрын
How well tmi dash fit and last
@CraftwerksMC8 жыл бұрын
Kevin, glad you guys are getting more vides up. Any idea what year the gm trucks like these started swapping to the metric bolts?
@Lmctruck18 жыл бұрын
There isn't a definitive year that is 100% the start date, but metric fasteners started to appear on GM trucks in 1979. GM continued to use SAE and Metric thru the late 80's.
@andrewturner17145 жыл бұрын
@@Lmctruck1 Can you do interior trim installation on a truck that was not originally equipped? Alot of people in my area would be interested in that.
@trirycheman6 жыл бұрын
Is it just me, or did that bezel not fit right in both top corners?
@michaelchasteen72596 жыл бұрын
no sir, that is just how the trucks are made from interior. i am 14 and drive a 82 c10 chevy truck. ive been working on rebuild and i discovered that too then i called lmc and they said is wasnt a mistake thats how it is ment to fit.
@vud72107 жыл бұрын
is there a difference between the dash cover and dash pad?
@springfield03sniper6 жыл бұрын
Hood Bites dash cover goes over the existing dash...he is putting a whole new dash board in the truck.
@naomipettigrew4655 жыл бұрын
Yes the pads glue over the old dash there junk I've done that before on mine
@rufusjewell25565 жыл бұрын
how can i get a LMC Truck Catlog for my 1984 chevy pick up truck
@fallendreamz1005 жыл бұрын
Go to lmctruck.com and on home page is a tab to request a free catalog they come in the mail in 3-4 weeks your welcome ...
@rufusjewell25565 жыл бұрын
@@fallendreamz100 thanks man
@sammysam459 ай бұрын
Is this the dash pad cover overlays/pads they sell on ebay?
@Lmctruck19 ай бұрын
They can be found here for Chevy/GMC square body trucks, www.lmctruck.com/1973-87-chevy-gmc/dash-components/cc-csb-1973-91-dash-pads
@claytonmiller37547 жыл бұрын
i like the video. but why not keep it maroon and show use how to vinyal dye interior parts
@MetRighteousTV7 жыл бұрын
i broke my ac bezel, im so pissed while taking out the dash to replace the speakers
@16driver166 жыл бұрын
I would love to have the old dash pieces for my square body, it wasn't even that bad then again mine is 10 yrs older.
@terryterry77158 жыл бұрын
Hi mates! Are all the interior parts of these videos (red/white GMC), fit in M1008 CUCV Chevy?
@Blakep77045 жыл бұрын
Who makes the dash? Is this dash different tan Brothers or USA 1?
@damianarriaga2190 Жыл бұрын
Where can you find the bezel at
@AlvinDean8 жыл бұрын
The truck I bought was "a work in progress" from the previous owner, so a lot of the dash items no longer have original screws... how or where do you get the correct hardware?
@billygreenhorn92758 жыл бұрын
LMCTruck.com
@AlvinDean8 жыл бұрын
billy greenhorn thanks! After I posted this here I scoured the magazine and found the hardware kits... glad they weren't a snake!!
@leonardshanedan9083 жыл бұрын
I have 1980 1500 hundred 4x4 camper special biogs down after hit 80 KLM wanna know how to get more air in truck need way to get more power after hit 80 klmr
@shawnlawrence48402 жыл бұрын
The name of the spray to change the color of the dash pad was not clear, could you update me plz
@Lmctruck12 жыл бұрын
Hello Shawn. We offer ColorBond to match your interior colors. www.lmctruck.com/1967-72-chevy-gmc/colorbond/colorbond-spray
@SOU69002 жыл бұрын
I'm hoping for finder badges for my 85 C30 Silverado, and Camper Special badges and 3+3 badges for the cab plus finder badges for my 85 K2500 High Sierra.
@Lmctruck12 жыл бұрын
Hello. Please find the link below for the emblems and decals we offer
@Lmctruck12 жыл бұрын
www.lmctruck.com/body-components/emblems-decals
@SOU69002 жыл бұрын
@@Lmctruck1 No need. I already know you guys don't have the badges I want.
@johngutierrez50155 жыл бұрын
Where does the check engine light go?
@tombetts47264 жыл бұрын
Why did he not show were the new tack lead comes from?
@RidingXX8 жыл бұрын
Could you guys do a carpet or rubber Matt installation video please!!!
@Lmctruck18 жыл бұрын
Hi Quinton, Here is a link to our carpet install: kzbin.info/www/bejne/oWi6p5iZl56ZbpY
@RidingXX8 жыл бұрын
Thank you guys!!!!! You are amazing helps a lot!!!
@mikehicks653 жыл бұрын
Is it an original (soft padded) dash or a hard plastic?