TOP MUST DO'S AFTER BUYING USED TRUCK!

[@borninthefla]

I’d like to see more service videos on this truck. Diff service or cleaning up anything leaking on this GMC. In short, making this thing mint again. Maybe some interior improvements/ mods as well. Lights, steering wheel etc….

[@robertking8578]

I just acquired a 2005 sierra, and subsequently I started looking for videos on this vehicle, which is how I ran across your videos. And I’m definitely picking up on some good ideas and things to do with my truck. I’ve really been enjoying watching and learning some of the ins and outs of this truck. Thank you for the good information.

[@draddictive7668]

You think it’s worth buying a 2008 gmc sierra with 150k miles for 12k?

[@jamesmatthew899]

@@draddictive7668maybe 10

[@tipsreviews7476]

Nothing better than an old well maintained truck. 👍

[@MikeOn2Wheels]

When checking ball joints, try and jack from the lower control arm so that the suspension doesn’t droop all the way out. Get the tire a few inches off the ground and then slide a pry bar under it and pry up and down. Sometimes on an IFS jacking from the frame to check a ball joint and allowing the suspension to droop out will hide a sloppy ball joint. Just a suggestion. Also, great way to identify worn steering components is to have a helper start the truck and wiggle the steering wheel back and forth with the tires on the ground while you crawl under and visually inspect each component. You’ll be able to easily see any play in steering components this way.

[@nsant]

How do you think SDK will do in moto 2?

[@MikeOn2Wheels]

@@nsant I think he’ll do well. Not immediately this first year but I think he will learn a lot and if he can adapt quickly will maybe get some better results later in the season. I think it’s great to see more American racers racing in MotoGP.

[@Please_Enter_A_Name7078]

When I got my used truck, the first thing I did was detail the interior. I used some Mother’s VLR, and oh man it did an amazing job at removing all the caked on grim and crap. All the high touched areas like the steering wheel and column shifter felt so much better afterwards.

[@TNAWWE]

i will only ever use Mother's VLR! nothing greasy or shiny, just a nice clean factory finish to it.

[@Please_Enter_A_Name7078]

@@TNAWWE that’s what I love about it, just a super clean feel.

[@fastacker2]

I have a 2006 Sierra 4WD also. Awesome truck since I bought it new. Get ready to pull your instrument cluster, replace the stepper motors and resolder all the cracked solder joints. They pretty much all go bad. There is also a steering shaft clunk issue (you will feel it at low speeds going through parking areas), on these that is easily remedied by packing grease into the steering shaft tube that the shaft goes through. Last year of the great trucks! After that they started with the cylinder management nonsense.

[@backyardinventions]

I would tint the window and leave it love the stock look on these trucks

[@WolfInSheepsSkin]

Getting my first truck (second vehicle) on Monday man I’m excited as hell. It’s a well kept 2001 GMC Sierra and the dude has all the maintenance done on it

[@christopherwilson7757]

Am I the only one who saw the picture of the the girl when he said "There's about to be some nasty, nasty stuff come out of this joint." ?🤣🤣

[@jasonwells9050]

Checking the lugnuts what a great idea sometimes the most simplest things are overlooked and then the most simplest things that are overlooked are usually the ones that caused the most catastrophic accidents

[@jasperqualls6872]

Buy your oil and filter at Walmart. Usually a bit cheaper there than at the part store.

[@dakotagoldwood6385]

Love the truck. I have a 2020 trailboss and love it. But the look of this truck will always be timeless. Inside and out! Can't wait to see what you do to it.

[@kadent7320]

Haven’t been active on your channel for the last few months, I’ve been off and on. But this GMC is making me come back and not letting me miss not one vid. In fact I still watch the old lbz vids. Love this body style.

[@BradHuey1992]

I have a 04 tahoe and 08 silverado both with the 5.3 liter. And I always put 6 quarts of oil in both of them every oil change.

[@blaneaustin3719]

My dad had one it was an 05 and I always said that was the best looking gmc ever made

[@austinseverns6143]

You tightening the lug nuts in a circle reeeeeallyyy bothered me 😂 clean truck though. Will be getting one myself here pretty soon

[@philvictor5537]

Don’t forget to change the rear differential fluid. And front also. And transfer case

[@shawnmay7264]

I miss my 99. No where near as clean but still a good truck. Take care if it and it'll take care of you. 😊

[@Mikey-wf9py]

Finally a nice truck on the channel now I'm just getting the other ones are nice but those new trucks will never be half the truck that this truck is never those new ones wish they could grow up to be like the 99 to '06 first gen Silverado 2nd gen Sierra They see those drive by and it's like me seeing my idol

[@user-wo2zc6ie7c]

just a service tip dont pre fill filters through the middle of the filter so you just put unfiltered oil in the filter. filtration is through the smaller holes along the outside

[@jlautomotive6349]

Another incredible find sir!! I live in NH and no way in hell could or do we have anything that clean up here… and if by an off chance we did they would ask some ungodly dollar amount…

[@cbro6535]

These 99-06 trucks are great I have a 2000 Chevy and she’s got the big 5.3 in her she’s rusty and crusty but she fires up every time ya hit the key you’ll love that gmc more and more after you drive it a lot and get the mechanical issues ironed out. I thought about getting another gmt800 truck sometime but this time maybe a gmc like your black one. Can’t wait to see what goes on with this thing love these 99-06 trucks 😎

[@Geoffreys-adventures]

That is a Good looking truck. I have a 2003 chevy silverado 1500 5.3. I enjoy it.

[@kennettmcmackin794]

In the process of buying an 02 sierra cant wait to add this list of mods

[@Huntlifts]

God Bless you all! All glory to God! Repent and live for God! Romans 10:9 “if you declare with your mouth that Jesus is Lord and believe in your heart that God rose Him from the dead you will be saved.”

[@dlea8413]

Love the new truck it looks amazing

[@Buddhalicious]

Never been a fan of the crew cab and short box but never mind those things, this truck is clean! Can't wait to see more!

[@austincurts2984]

So glad you got this thing to do videos on, just got an 06’ sierra z71 as a second truck and currently waiting on my big amazon order to get here lol

[@jonathanmccall8465]

You got a good one I have an 04. It's hard to find the 1/2 tons with a crew cab and 4×4. Most 4x4 in these body styles are only extended cab and most crew cabs are only 2 wheel drive

[@whales302]

Had the exact same truck, loved it, nothing ever gave me any trouble. This 2014 Sierra I have now is a piece of junk, nothing but constant problems.

[@ryanfarmer5155]

Same here, just sold my 14 Silverado z71 and bought a crew cab 05 Sierra z71, that 14 was trash. My new 05 has 160k very clean, and smiling from ear to ear, 10x the truck over the 14

[@themilkdud8515]

I bought an 07 Cateye in May of 21 truck was great when I bought it then literally next day I got the infamous engine lifter tick. Also had a couple leaks underneath spring up but nothing major. Still been a good truck

[@orioles4128]

I like to take an awl an puncture a hole In the bottom of the old filter, less mess to cleanup

[@BabySquatt]

Clears head and fog lights 4 inch lift no blocks true dual catback with chrome offset or split 7s cam it of course

[@howdythere2419]

Good looking truck! Hope those tie rods aren’t too hard to replace. Honestly to be positive and look on the bright side it could be alot worse than tie rods. As for exhaust I would love to see an h pipe setup.

[@TheUndertoe]

Tie rods are pretty easy to replace

[@themechanic4592]

Nah I think true duals would be better with straight pipes

[@gungarcia]

Just got a 2017 GMC Sierra slt dark slate metallic a few months ago congrats on that clean nbs love to see it will definitely keep up love the content!

[@justinhemingway8190]

I’d like to see a transmission service. Drop the pan and do a filter change too

[@bravobullz7475]

Just got a 2011 GMC Sierra z71 78k miles Found you because of the range

[@trevorjohnson7709]

I’d recommend getting yourself a obd reader even if it’s a cheap one makes life way simpler I paid $40 for mine it pairs to my phone and it’s handy as hell to have

[@chadhickey9942]

keep this one decent. dont raise the front end w/o raising the rear and make a squatter out of it and use hot wheels tires and wheels! these old trucks are great!

[@billydavis5650]

😂😂😂i hope he got a lil more sense 🤣🤣 but I think he does

[@jaydinmeinzer8454]

Man it’s his truck he’ll do what he wants

[@chadhickey9942]

@@billydavis5650 his other trucks are sqatters on skateboard wheels, so.. lol

[@chadhickey9942]

@@jaydinmeinzer8454 yup. just like his other trucks.

[@frydemwingz]

I always drive it to a tire shop to get new tires and while they are off, ill go in there and look at the brakes.

[@musselmanmedia5236]

GMC LOOKS SO CLEAN

[@08bowtie]

Do a 4:56 gear swap in it before any major mods. Sounds like a lot but is perfect with the 5.3l on 33” tires. I’ve done 2 trucks this way and wish I would have done the gears first before cam intake headers etc. The gears will make more seat of the pants difference then then adding 75hp to the engine. Great looking truck btw!

[@ALCRAN2010]

What gears would you recommend on one of these?

[@08bowtie]

@@ALCRAN2010 Richmond is usually the brand I buy. I order mine from Jegs.

[@jewllake]

on my GMT 800 I run the 99-02 oil filter; it is much larger than the 30-06 ones.

[@joeshort1833]

Can’t wait for Engine Mods for realizability and new front end suspension! I’m currently doing the same to my 05 Cateye.

[@BabySquatt]

Clears head and fog lights 4 inch lift no blocks true dual catback with chrome offset or split 7s

[@foxwithshades7080]

I think this new Sierra is already my favourite truck.

[@djrecreations6636]

I’d like to see an exhaust set up put on it first like some true duals. Would also like to see some wheels and tires go on it. Kinda think long term you should murder it out all black

[@tylergarner5907]

Did anyone not notice he used a filter wrench to tighten the new filter 🤣

[@nathxann4975]

Would love to see a nice exhaust next, not too loud, but definitely not quiet! Beautiful and clean truck, honestly my dream truck.

[@chasebarksdale5035]

I have one just like it and the exhaust he needs is true duals with high flow cats and two flomaster super 10s it’s loud and has the crackle in it but not clapped out

[@sagemoodz3771]

I’m a oil change lead tech and I dont recommend putting oil into your oil filter just because that oil you pour down into the car will go into already

[@chasebarksdale5035]

Whenever you decide to run the exhaust I recommend true duals with high flow cats, flomaster super 10s, and 6” rolled tips. It’s loud has the crackle but not clapped out. Makes the truck sound real mean I have the same truck just white

[@themechanic4592]

I think straight pipes would be better atleast it would sound better

[@redfox4116]

Love the videos always puts me in a good mood

[@eastonstricklin2164]

Headers, exhaust, and cold air intake for sure.

[@richardhobson9587]

Hey man, love the videos. Ive always lived in alabama so im local to yall. Love that GMC, my dad owns an extended cab version and it literally looks identical

[@bradentworow9750]

Clears and some dark tint would be sick! I will enjoy this build.

[@tylerweeks644]

True duals big boi tips, maybe a 4 inch lift, and some widess

[@grissom.]

colormatched fender flares, leds all the way around, exhaust system and a bed cover!

[@haydenward17]

definitely exhaust first and 5 percent tint and take the fender flares off and the front bumper valence and lift wheels and tires

[@carlloggins9297]

Sir I always recommend when changing oil that you run a low grade(cheap) clean qt of oil through before plugging your pan back up to help wash out debris that may be trapped higher up than pan! Don’t know if it helps or not just something I was told as a young man

[@gettin_while_growin1512]

I recommend using the oil filter wrench to tighten the filter 🤣,nooo never do that 😆 .A magnetic drain plug helps with debris also.

[@KalebLabbe]

check the actual steering box as well i had one of these trucks and it was bad for so long and the steering was all over the place

[@Undeadgamer]

I’m sure someone has said this somewhere in the comments but you should get a punch tool (or anything with a pointy end) and poke a hole into the oil filter to drain out the oil from it, I find it to be less messy 👍 found your channel about 2 weeks ago and i’m loving your videos man great work

[@codybrown1204]

Looking forward to seeing your progress with that beautiful gmc

[@djrecreations6636]

Take the fender flares off if it is clean underneath them.

[@jeremypoole8879]

Love the truck, had a gmc for ten years and love it. Needs a lift ,wheels and tire and that thing would be looking right

[@isatntt]

i think the stock wheels look fine, but to each their own i feel like everyone puts on aftermarket wheels and they always look the same, i like the more rugged look and im digging the tires thats on it

[@TheSotexy2]

one of my favorite trucks....i look almost everyday for one!

[@BaptistJoshua]

Why do you prefer them? I am still looking for some truck or van.

[@TheSotexy2]

@@BaptistJoshua to be honest, a buddy of mine had one growing up late teens early 20s back in 2011. Tough truck, built to last and went through hell and back with no issues what so ever

[@BaptistJoshua]

@@TheSotexy2 Thank you. I have been told only Toyota is good, and Chevy/GMC/Dodge are trash, but I mostly see old Chevy/GMC on the road, and they tell me they are great. I just want ease of use. Reliability.

[@TheSotexy2]

@@BaptistJoshua during this same time my friend had this truck, I had a 2008 ram 1500 with a hemi. So much fun and powerful but very cheaply made

[@BaptistJoshua]

@@TheSotexy2 I have a budget of $2,500 tops, right now. Looking for something decent.

[@AKtheEnthusiast]

I love these videos! Amazing video Chase!

[@puddles1458]

Awesome truck brother, I've always had GMCs and I love em. Last July I found an 02 crew cab GMC 2500hd with 86,000 miles on it, had to go all the way to new jersey from Colorado to pick her up. Pretty excited about all the mods I'll be doing, the biggest being a lift and tires since I almost got stuck elk hunting in some deep snow. I was thinking about a cold air intake too but my engine is stalk and probably won't make much difference, plus it'll probably just trigger the check engine light. I'll probably just go with a KnN drop in filter. As for Mods for your truck, I'd go with an exhaust, maybe a 7 inch BDS lift with 35s. Would look pretty sweet. But there's a bunch of other things you could do too like diff covers, new spark plugs and wires, optima battery, rainx windshield wipers with rainx 0 degree washerfluid, coolant flush, change transmission fluid, kryptonite steering components, wheel bearings and upper control arms. Possibilities are endless lol

[@MJ_Landscapes]

Should do a video on what pros and cons to look for on a new or used vehicle

[@willtaylor9264]

Take off the lower front bumper plastic piece it’s a small and simple thing to take off but it makes your truck look like it has a little bit more ground clearance.

[@topfiveservices8858]

i got a 2003 sierra so I would like to see more love these trucks

[@Martinez07]

Do a video of you replacing the tie rod ends Clean truck!

[@Landonsheffield]

I was shocked when I saw the headliner and seats not ripped the inside of it is in perfect condition,wish I could say the same about mine.

[@ssnow1119]

If you want to try something different for exhaust either long tubes and no cats or just no cats with true dual flowmaster 40’s sounds good

[@bradenstevenson8113]

put 3 inch keys on my 95 obs didnt lift much probably already had 2.5 inch keys but now i can tuck 35s very minimal scrub hardly notice

[@68Pontiac100]

I’ve got the same truck but in an SLE trim. I’m curious what the biggest tire size you can fit on a leveling kit is when you’re running factory rims. Super excited to watch this truck transform on your channel.

[@obs_jase]

You can run a 33in at the biggest with a leveling kit and that will rub a little bit due to chevy and gmcs square fender wells. Youll need a lift for anything bigger than 33s

[@owengiles8446]

I have a 3” level on mine and with minor trimming, I cleared 33x12.5 with -44 offset

[@ArkansasCalifornia]

I have a a 2005 Silverado 1500s with a 3 inch lift and I run 35s

[@loganclark312]

Guy on Instagram has same style with cranked keys and 37s

[@obs_jase]

@@loganclark312 ok but im sure he had a lift. The guy i was telling said what the biggest a stock truck with leveling kit not a lift

[@mrgooberdoodle]

Do you have any merch? I generally don’t buy KZbinrs merch but I’d love to support this channel!

[@drerocs]

Truck looks clean. Nice pickup

[@jakeklotz7880]

really enjoyed the video even though some may say its boring, would love to add one of these to my collection lol cant wait to see the process on this one.

[@randomvideosyt5955]

Got to do staight pipes with the 5 inch tips 😎

[@earlysquad1098]

Where did you find this beautiful 2006 GMC. I am searching for a truck just like this one. The price of trucks for the older ones are off the chain and new ones with Active Fuel management system or DEF is not going to cut it anymore. I want an old one to love and cherish ! 🇺🇸

[@thomashardwick673]

Looks good. I am sure u are going to update the headlights and fog lights first and then work to move expenses mods.

[@levinolen2432]

What exhaust do you have on Terry (asking for a freind)

[@owengiles8446]

Should wrap the front GMC emblem black so u have the black and chrome theme going on

[@maxjohnson4466]

super stoked to see this build 🔥

[@clappedout6140]

Need to grease the fittings also on tie rods ball joints etc

[@ajgraves9220]

I’ve got an 03 Tahoe with the 5.3 and I’m excited to see what’s done to the Sierra and maybe get some ideas for mine!

[@rogerfuller7876]

Larry is forever my favorite! I’m going to look at a 13 GMC Sierra Denali with the 6.2! I’m hoping I’ll like it! I’m definitely going to look into a dfm disabler for it though!

[@zyonandree3846]

That bodystyle gm did not have AFM on the 6.2L

[@wheretheredferngrows14]

I’d like to see you show us your inspection technique like everything you look over.

[@gettin_while_growin1512]

You got that oil filter pretty dang tight lol.At first you put the oil filter wrench on it and I was like ...NOOOO lol.Nice lookin truck though.Whens that cam coming fuggin? That's what I want to see next.

[@jacksonstovall2351]

That’s a super clean truck man

[@DEMiZDEF]

You should remove the fender flares, level front and put some 18x9 Methods with 35x12.50 Nittos on.

[@perez4.817]

I just picked up one of these I love it

[@kylefrye6265]

That truck will run circles around your trail boss, might look as good or sound as good but will be a great truck for the channel

[@drakerankin9858]

Do an engine bay detail video. If you want to change headlights the factory style ones with clear markers look clean you can find them on eBay I got a set for my 05 Sierra a few weeks ago and so far they are good, the park lights that come with them don’t have clear markers though so I had to buy another set of just park lights

[@CEOSKOOL]

Yeah we just see ya in good ole boys!

[@TheWolfMatt]

Just catching up on your vids for the old 06 Sierra Z71. Nice find btw. These are great trucks but even these do come with certain issues you'll need to address. Like the steering components on these, they do like to slop around due to the tie rods wearing out. The Rough Country ones work just fine and do tighten things up a bit. Also, look into updating your steering box as they also have known issues to get sloppy over time. The U-Joints and rear axles should be your next concern, especially if you decide to start putting down more power than factory. Also, the 4L60E is a HUGE (emphasis on the f*cking HUGE part) issue on these trucks. I highly recommend getting either a built trans or doing an update to yours to the 4L65E. Getting a 4L80E is preferred but usually run you more than doing the upgrade to a 4L65E with the same results.

[@Aloosh-gt4oi]

I’m in the market for 06 1500 HD, found one, but I got no experience in checking the truck any recommendations on what to check would be very helpful, thanks.

[@TheWolfMatt]

@Aloosh1990 That really depends on how many miles the truck has on it. If it's the HD version then you'll have the 6.0L LQ9 mated to the 4L80E already, just check for basic maintenance done on it and you should be fine. Take a few notes from my above post as well. Obviously if the oil looks milky, including transmission fluid, then there's a big problem that needs to be addressed. Metal on the oil drain plug could also spell trouble. These really are great trucks as long as they're properly maintained. I hope you found a good one. Best of luck bud.

[@Blackocalypse]

We want the Sierra lifted 7" or bigger preferably bigger

[@lmfscrew]

100% will be 7” or bigger this year

[@craigwjones22]

Mcgaughys 7-9in lift????

[@ricardoavalos8808]

Good looking truck bro , I like that body style trucks 👍👍

[@shaungreene3912]

Love the new truck !!!

[@calebwiley998]

For exhaust do true dual straights with no cats