Load your own blank rounds in 38special black powder.
Пікірлер: 15
@johnmcdonald5873 жыл бұрын
You didn't mention drilling the case touch hole over-size to prevent the primer from backing out and tying up the cylinder. These loads would not be acceptable for reenacting use because of the wadding. Rose-crimped cases only.
@TheArizonaOutriders7 жыл бұрын
the red device you asked about is a Lee single stage reloading press. it is on of many different reloading systems. I bought mine at Cabelas, but I purchase a lot of my reloading supplys from Midway USA as well. please read any and all material you can find on reloading before you start, all powders and bullets act dofferently, and can be very Dangerouse if treated equally. good luck, and stay safe. reloading is to me just as rewarding as growing your own food, building your own car, or building your own house, but easier.
@Indianarmslover6 жыл бұрын
Very nice video about blank loads,I have 357 magnum colt phython revolver can I use 12 gauge shotgun smokeless powder for blank loads.
@maxnichols13837 жыл бұрын
Sorry - I am fifteen years old and a newbie at reloading. What is the red device used for crimping called? Where did you purchase it?
@stargod30644 жыл бұрын
Do blanks sound the same for different guns or does each gun have its unique gunshot. And how loud is the 38. Special? I have one haven’t shot it yet.
@Sweegan73 жыл бұрын
yeah
@georgewilliam49202 жыл бұрын
Hi can you add pepper powder for self defense
@jimjobbagy9876 Жыл бұрын
what do you do yo prevent the primed from backing out when the blank is fired???
@ww2mike Жыл бұрын
Must drill the primer hole out with a 9/64" or 5/32 drill bit. Make sure then to NOT use for smokeless live fire then.
@druszan175 жыл бұрын
is this works with smokeless powder too?
@reloadernorway10424 жыл бұрын
Not really 😱
@johnmcdonald5873 жыл бұрын
To use smokeless powder an extremely fast burning powder is needed. Without the forward obturation of a projectile, slower powders don't combust very well. Bullseye works well for smokeless loads.
@thefreese12 жыл бұрын
If you do use smokeless powder you'll need a fast burning powder..I recommend ---Titewad... Tou don't need much( hence the name: Titewad ) an this will leave more room for another wad. Which equals more compression... however it also equals more wadding coming out the barrel so in a way it makes it more dangerous...remember that cork wads are not aerodynamic and will fly all over the place as soon as they leave the barrel and catch the wind...so holding off to the side means nothing unless you're turned 90° or more away from the target.. Also NEVER .I SAY NEVER ... DO what this guy suggests in the video...( Aim off to the side if shooting a mock gun battle or re-enactment ) I REPEAT ... NEVER EVER ... You need factory crimped loads only for that because they have no wad of any kind in them and therefore are safer . And yet even those are dangerous at close range because even the powder can fly out at a fast rate and blind someone ..