Lock Your Clock

[@blaeck9063]

It would be very nice if your videos were organized in such a way so that it's divided it into two parts: one where you explain what it is you are doing and why you are doing it, and the other part where you actually do it and then have them timestamped. I come back to many of your videos weeks or months later to either adjust something or redo the optimizations after a fresh windows install, and each time I have to seep through the entire 30+ minute long video to find the 5 minutes that I need. Just a thought.

[@sheo1835]

Damn it!!! A huge thank you fr33ty, I have an rx 6900xt, and a ryzen 7 5800x, I had jerks on cyberpunk, and the other games, with your method, no more jerks, MAN YOU ARE A SAVIOR :)

[@aidanpremium9870]

What you mean by jerks?

[@thefunkybassist9916]

@@aidanpremium9870 random annoying people in Cyberpunk that were causing the stutters

[@elhuron8566]

One of the many reasons to buy Nvidia is that it generally just works. It's not as much of a minefield as AMD, where you have to pay super close attention to which driver you install, that the card actually clocks like it's supposed to, it has a good encoder that integrates flawlessly with every software out there etc.

[@bad-sackingen5892]

Yeah, when I was younger saving an extra 100$ was huge but nowadays I don't want to deal with shit like this in my free time.

[@dr.hannibal8338]

What you mean

[@ilikehiking]

There have been several instances where Chris recommended older Nvidia drivers because they performed better, and you also have to go through quite a process to debloat your NVidia drivers which is much simpler on AMD. Nvidia drivers are without a doubt less buggy, but if you want best performance you're still going have to put in some time and pay attention. Ultimately both AMD and NVidia "just work". You can install standard drivers, on a stock Windows install, and you'll rarely have issues either way. This whole argument is kind of nonsense. If you wanna get the most out of your system you'll have to put in some time regardless of your hardware, and if you don't like that just stick to stock settings.

[@jay-d8g3v]

@@ilikehiking Nah AMD needs to figure their shit out. Great hardware, shitty support. If you aren't tech savvy, don't bother with AMD.

[@ilikehiking]

@@jay-d8g3v Nonsense.

[@VnikXum]

There is mistake in video. GPU clock frequency in MSI Afterburner is not the "real" clock. There is clock stretching (like on AMD Ryzens) then you set it in MCT or AMD software. HWINFO can show "effective" clock for processor and GPU, that reported by internal hardware sensors. If real GPU clock goes up, then tepms and power draw also goes up.

[@ainmon5875]

Holy shit! I've been dealing with crazy stutter in Valorant for months. I also had some bad input lag I wasn't even aware of. This finally fixed my problem and there's practically no input lag. THANK YOU! I have a 6800XT btw.

[@consumedinner]

literally the same issue 6600xt

[@JedIkigai]

Bro what's the settings! Send please

[@ainmon5875]

@@JedIkigai just copy what he does in this video

[@JedIkigai]

Thank you bro, i’m experiencing the same stutter and fps drop from my 6800xt. It is paired with 5600x. I never had an issue with my previous gpu which is 1050ti and it’s frustrating af.

[@ainmon5875]

@@JedIkigaiNo problem, I know how annoying these issues are. I also found out that my ram wasn't running at full speed, which also caused stutter and low fps in some games. It's a common problem with AMD. Find out what speed your ram is supposed to be running at, and then look in your task manager to see if it's running at the right speed. If not, there's a ton of videos out there on how to fix it.

[@purdy185]

holy shit man. this saved me! i was going crazy with the stutters in valorant and this helped so much. learned a lot from this video. thank you!!

[@mattquarles7029]

So for the people that have some issues even after this. Turn off everything with amd boost and frame generation. You want to undervol the card to 1175mv you can try 1150 but some people I've read are having problems going this low. 1175 is what worked for my xfx 6750xt. Max boost clock is 2752 and min is 2652 I do believe. It has a slight overclock. Might be off a few ticks as I'm not by my pc. I then turned off adrenaline overlay. Everything runs like butter even with the bloat driver. You can close out msi afterburner and the adrenaline and run games like ghost of tsushima 1440p max settings solid 60 with vsync. No frame generation. Very impressed as I went from a 1080ti Duke oc that I've tweaked and overclocked since 2020 and I've gained some 30-40 or more fps in all games without stutters. I usually lock it at 60hz as I have a weak monitor atm and nothing stutters at all.

[@nocebo_]

Its easy to lock clockspeed in evga software. Just klick "boost lock" and your done.

[@KM-kl2wu]

Love your channel bro no bs just informative im loving my 6800xt with minimal driver its freaking fast with this setup

[@check4566]

Thats cause 6800xt is a beast 😃

[@troy3984]

Holy shit... I went from awful input lag in Apex to literally zero, and ~1.5x my average FPS. Thanks a ton man

[@brutyfruity]

Apex is what I'm trying to optimize, I hope I can find out what you did im about to quit the game lol

[@heatnup]

Actually you don’t need more clock tool you can do it by default in afterburner. Just click on the curve editor and drag the dot up to where you want your minimum to be set.

[@RandyTweaks]

it resets for amd

[@Jbpennes]

@@RandyTweaks Just tried this way and that works perfectly now while the author method does not anymore.

[@kubaprzybyowski3788]

@@JbpennesBro it is not working anymore? What should i do??😢😢😢

[@r3tri3ution_z3nith_point_z6]

Much love Chris! Another Banger!

[@moses7725]

Bro KZbin way to comfy with these double 15 second adds

[@emanuelescilipoti1055]

Incredibile, i was selling my just bought 6750 xt but this video has changed everything

[@NS-tr7wq]

I have a 6900XT thatd been giving me the shits with its stutters. I was at my witts end , legit planning on spending 3k on a 4090 until i saw this video. Thank you very much!

[@ReaperHackz]

🔥🔥🔥

[@upkhabarnama6202]

because its hard doesn't make it impossible! Stay safe!

[@thisiseddy]

Thank you for sharing this with us!

[@paulboc]

Thanks for all of your tips! I've just been getting into producing myself for my artists and mannnnn. It's like science lmao. Thanks a ton!

[@notblazedfordays9536]

I think they fixed the shortcut and other things. After downloading the software the shortcut opened no problem and imported my settings from the bloated AMD software automatically. Also I didn't have the source folder when I went into the c:drive file and went to more clock tool. My question is will more clock tool be running and locking my clocks without me opening it and without MSI afterburner? Thanks Chris!

[@shoutxv]

works like a damn charm my man sheeeeeeeeesh

[@synbrainstorm6179]

I click on SET and it still ignores it. Almost like some other settings is forcing it.-

[@nyuuuuuuui]

I had this problem when playing Battlefield at low settings. I would try to lock the boost clock in the driver OC options and it still wouldn't boost properly. Tried multiple drivers, playing with drivers settings for days. Just a waste of time overall. There was horrendous microstutter because card was below 1000MHz in-game most of the time. My older card which had about half the overall performance actually felt smoother despite lower fps. I returned the 6900XT next week and got an Nvidia card instead which worked as advertised out of the box. AMD software is a joke, never again. Nobody should have to go through this stuff and third party software just to get the card to do BASIC functions. I don't know if this tool existed back then, this was last year. But still, no one should have to worry about this stuff to get stock performance out of a $1000 card.

[@griffin1366]

Friend of mine had non-stop crashing / blackscreens with his 5700XT. It was $300 cheaper than the 2070 Super at the time so it was a good "deal"... Well, lets just say he won't be buying or recommending AMD ever again and likely will I. These are big expenses for a lot of people and to have them just not work properly is a awful.

[@Maekiii]

@@griffin1366 From what I've heared the vast majority of blackscreen issues of 5000 series were caused by not running DDU before installation and bad display cables.

[@griffin1366]

@@Maekiii It was a brand new PC / fresh install of Windows, no tweaks or optimizations etc. He managed to figure out that Chrome and Discord hardware acceleration caused a lot of the crashes. Disabling those stopped at least 80% of it. In the end he got a refund and went for the RTX 2070 Super. Has been happy as larry ever since.

[@Jbpennes]

Just tried and sadly Afterburner never understands the -100Mhz. I did exactly like you did but it does not work for me. 6900XT FE, MSI Afterburner lastest version and same for MoreClockTool :/ So I updated it through the curve on Afterburner and that works perfectly, it keeps the good profile each time I reboot the PC :) Maybe there was an update or something but your method does not work anymore. Thanks for the tip!

[@Manakuski]

I have a similar issue though with my 3070Ti when playing world of warcraft. Card stays at 1770 core clock and the game feels really bad, lots of input lag. Even cranking the settings this happens sometimes in dungeons. If i wouldn't enable "prefer maximum performance" from nvcp, it would be even worse. I guess there's a way to lock the clocks for the nvidia card too, but i kinda don't want to do that. I'm wondering though, is there a way to do that for one profile in msi afterburner? If there is, i think i could give it a go.

[@evan6301]

CTRL+F to open graph. press L the part of the voltage curve u want to the lock the gpu at. exit the graph and hit apply and u can save that profile. the saved profile will save the lock on the graph

[@lightcore1]

MSI Afterburner doesn't seem to take over minimum clock when I save it It only works fine right after pressing that set button in MCT, any idea?

[@alext1757]

It really works, you are a lifesaver :)

[@jovanstevanovic9621]

Nice vid Chris,u are the master,,j got a question,is this the same as MPT under the frequency tab?j mean,u can set there frequency min max too j gues whitout using afterburner?Thank you

[@Pacify]

Do you have a way to turn on a fan curve when Afterburner isn't on? It seems that the OC works off launch doing it how you did but I can't seem to get it to stay on that fan curve if Afterburner is closed.

[@notblazedfordays9536]

I use the bloated AMD software to be able to record clips and also to set the GPU frequency minimum 100 under the max for my 6900xt. I’ve had no issues with my settings ever randomly being reset. Will I be able to use this tool without MSI? I usually use AMD to monitor the performance on second monitor. If I have adrenaline open when I game will using more power tool not work? Thanks for the video Chris!

[@HumanLikeMan]

Will I be able to use this tool without MSI? Was wondering the same thing since I just wanted to try it without installing everything else.

[@ur1man]

Interesting, I had similar issues with maintaining a persistent fan curve profile in Adrenaline. The settings would reset often. I decided to pair my 6900XT from 5950X to my 9900KF system and the Adrenaline crashes and resets stopped....

[@notblazedfordays9536]

@@ur1man hmm. I haven’t had any crashes or resets. Fan curve and other things have always stayed the same. Not once has it reset. The GPU min does drop below the 2,434 mhz I have it set to when I play fortnite and go into wide open spaces and a couple POIs randomly. After I close out the game and try to go to the record and stream tab to edit clips or go to anything in adrenaline it will say not responding but after 10seconds or so it will stay open and work. It happens half the times I close out my game and click on a tab in the software but it’s never reset anything or closed out.

[@notblazedfordays9536]

@@ur1man I just upgraded the 5800x to the 5800x3d… I hope I don’t start experiencing crashes! Did you try using the more power tool thing from his video at all? I’m curious if it will work with the bloated adrenaline or if it will cause issues. Although I don’t really need to have adrenaline open, but I do put it on my other screen with the performance metrics open when I play

[@ur1man]

@@notblazedfordays9536 I have to take back partly on my previous comment. When I set the fan curve, I had no issues with reset. I decided to use Adrenaline software to tweak the min on 6900XT. Today that app was reset. I don't want to mess around with the app (More clock tool) at the time being, I just want to game lol. My games run pretty good except for battle royal warzone. When I enable Radeon boost in rebirth games and Fortunes Keep its all smooth.

[@jamesholland167]

I can set the settings and they stay in MCT but soon as I save it to MSI afterburner it's like it defaults itself and won't stay saved

[@drew4055]

more clock tool isnt working for me it keep saying "ADLX initialization failed" when i try to launch it

[@shanksisnoteventhatstrongbruh]

nice, did this with my 5700XT and forced it to never drop below game clock (1750mhz) when playing games. Thanks!

[@streetzoom]

Hi, can u help? Because when i try to lock for example on 1900mhz or any other number and press set, the clock reset back to 800mhz, and their is no way to set any number, always reset to 800. Driver is minimum. Sorry for bad English, try my best.

[@mrziko6938]

@@streetzoom I have the same issue with my 5700xt did you find any solution?

[@skylabhalo]

@@mrziko6938 same problem with my 5700xt

[@eightyeight3594]

Ive been literally dealing with stutters since i got my 6900xt last november. Even in modern warfare etc gpu would be boosting normally and drop to base clock at random. This finally fixed it. Do you use smart access memory in bios?

[@mxngxchxngx]

U should probably use smart access memory if u can. It just boosts ur frames

[@jimforceus2885]

I use SAM too. It’s awesome

[@dgwow]

Hi there, thanks for the video! If you're playing a game and it's not going up to the min boost clock that it's locked to, does that mean the game does not need the boost clock? The fixed clock speed works with the unigen software, but playing WoW for example on lower settings is having the GPU clock constantly fluctuate from like 200MHz to 2300Mhz.

[@deaconbrammer6344]

I have the same issue

[@sblaz-]

@@deaconbrammer6344 did you ever find a fix for this?

[@xy1749]

Nice vid

[@himself9540]

Questo aiuta con il calo FPS che hai con AMD? su valorant funziona anche? (I have a 6700 xt ryzen 7 5800x processor) Something for valorant specific to the drop fps even with a high-end pc all the low? being CPU dependent some settings?

[@Pacify]

So does this fix the Warzone stutters completely??? I have a 6900xt and I've been messing with it for months trying to fix the stutters I play on 1440p.

[@FR33THY]

yeah i have no issues at all, as long as the rest of your rig is setup right ram/cpu stable etc

[@mushbeck]

Have had the same issue on a 6800xt only on caldera, but rebirth island is perfect. Have literally tried everything.

[@Pacify]

@@FR33THY so I lowered my power to -10 from +15 and set the minimum clock 100 under it was 200 under and stopped running msi afterburner so far games been running much smoother but now my frames are going past my monitors refresh rate because riva tuner only runs with msi afterburner for eme

[@Pacify]

@Sensor It helped a good amount and I was on the newest driver out I am currently rolling back to the one he recommended to see if its better.

[@Pacify]

Oddly enough I am experiencing a lot of packet burst on this driver... Idk if its the driver or the fact that I am on minimal driver and having issues setting a fan curve that won't run without Afterburner turned on...

[@Neikon]

hey Chris, how high are your hot spot temps when you have 99% load on your 6900XT?

[@TacoW]

settings in moreclocktool doesn't apply for me and just resets to default when pressing "set". I have amernime full drivers installed on 5700xt

[@ollyjxrvis9501]

same also with amernime drivers

[@skop333k]

yo Chris, i was wondering, what could be the issue, i have rx 580 8 gb and ryzen 5 3600 16 gigs of ram dual channel and followed every single one of your optimization tips, and still cant get stable 60 fps in fortnite on absolute lowest settings (50% scaling 💀on full hd ofc)

[@themaskfromfaraway3764]

PC but I'm going to start using Mac very soon and making tutorials on how to use soft soft on Mac effectively

[@sp-xx8ty]

Does this program actually turn off ultra low power savings? Msi doesn't work for me and that is the problem i have when playing old games it's like 14mhz

[@captainangelz8677]

any solutions for older amd gpus ?

[@gamer4ev3r]

Will it boost gpu ultilization? Because im cpu bottlenecked... Will it make the gpu do more work?

[@wolfsaccount1194]

I tried doing this and forgot to change to the 22.5.1 ( was on 22.8.2 for spiderman) and I ran a game and it crashed and my screen settings reset like hz and my blue light filter which has happened before when i have crashed so im not really worried about that. I downgraded to 22.5.1 and for some reason now monitoring software won't work (afterburner, etc...) like they won't track gpu temp, clock speeds and my preset in afterburner is not saved. Why is all of this?

[@insomzy]

when i press set in mct the settings get reverted to default. on a 5700 non xt

[@vasstselepidis231]

Same here with 5700 xt

[@chaseispleb]

I also have a 5700 xt, when you press set it doesn’t set to default it sets to whatever clock is currently applied. You can see this by changing your max and min clock in Msi afterburner then clicking set in more clock tool.

[@chaseispleb]

I’d recommend following his old amd tutorial from like 10 months ago or slmething

[@tykipper965]

when I hit set with my 5700 xt it just reverts to 800 and whatever the max was. and the voltage stays 0. any reason or fix?

[@K7ZV]

hi Fr33thy, can u explain how to put that colors on your computer, i like it.

[@Lynchy237]

Ive had the clock speed min/max set paired with the recommended driver for my 6800xt since around 3months ago + followed your amd optimisation as well...still cant play the caldera map without stuttering every 3-4secs. Every other Cod map or other games run smooth as. System is a 5600x with 32gb ddr4 3600mhz not running pbo or undervolt

[@ur1man]

Right, we spend so much time trying to fix a bug most likely caused by Activision. Best to wait for the driver update.

[@eddie4124]

everytime i press set in the clock tool it resets back to where it was

[@TheKhmerboy92]

Thanks I'm going to try this out since I've always been trying to stop the micro stuttering in Warzone Caldera. I'm using AMD bloated software to set my min clock since I've never encounter any problem with it resetting. But will keep you update if I encounter any errors.

[@mxngxchxngx]

Did it work?

[@TheKhmerboy92]

@@mxngxchxngx Nope still getting Micro stuttering in Caldera smh... I have MSI Gaming X 6900xt and set my min 100mhz below and even adjusting the setting and still have stuttering. I'm on AMD 22.8.1 driver btw. I give up hope on this card at this point since nothing seem work. My other PC with 3080ti running Caldera no problem smh..

[@mxngxchxngx]

@@TheKhmerboy92 i heard 22.8.1 is the problem. Try use recommend

[@mxngxchxngx]

@@TheKhmerboy92 also make sure antilag is off

[@TheKhmerboy92]

@@mxngxchxngx I tried the 22.5.1 driver already still have micro stutter. Not really concern about it since I dont play Caldera alot anyway. It's just suck that sometime when Clash mode is available and I'll get one to lvl up guns but it's suck due to the stutter.

[@fredbarney2649]

Im having a issue. My max clock in newer, gpu intensive games is up to 2750 and 240W, i did set the MCT to 2650-2750 and 15% power limit. In older games that dont utilize gpu as much the clock is okay around 2500-2600 when before it was only a bit above 1000, but in the newer games im not getting past 2670 and the wattage pulled by gpu is 190 max, i'm thinking it can cause worse performance in newer games. Does anyone know a fix?

[@cyclechris6591]

Why do we not want to do this in the full driver adrenaline?

[@mgpdrumsetboy6251]

What if I only have the option to download the latest version. I guess they saw your video and decided to remove the option to install older versions

[@test-by5rg]

nice video quality

[@Pappajams]

what do you have for me with Nvidia cards like mine RTX 3070 TUF Gaming.

[@franceanegalicia4224]

I can’t drag content / sample into my playlist on Mac? Anyone know how to fix

[@brycebeechey5548]

I have a 6900xt toxic LE followed the steps with moreclock and setting it doesnt change my max or min on msi. its getting tops 800mhz in valorant

[@rockbytegaming4138]

Foreal man.

[@matthieubouchard1902]

Do you recommend doing this with a 6700 xt ?

[@anaconda4880]

when i try to run moreclocktool it says no supported adapter found error

[@kondzio362]

everytime i try to set it it resets is back to default i have a rx5700xt gigabyte oc edition .

[@wytner3280]

I’m unsure if my issue stems from my AMD GPU or my pc is poorly optimized but I’ve followed all the advance you’ve given and my pc still get consistent frametime stutters in high fps games like Valorant. I suffer more in Valorant then I do In COD Warzone right now. My pc specs are Asus Rog Strix 6800XT, i9-850k, 32gb 3600 18cl ram, even my monitor is pretty good (XG27AQM). I’m at the end of my rope here I’m not sure what to do, the game consistently gets 300fps but these stutters are unavoidable. Does anyone have any recommendations even if it’s just book a consultation with a verified pc optimizer or just buy a new gpu I’ll do whatever.

[@oc4br]

u need a better ram. try asgard 3600 cl14. cl18 its too large

[@crian117]

You don't need MSI Afterburner to apply the settings from MCT on reboot.

[@geoffreyfleury8447]

Comment faire pour appliquer à chaque démarrage mct sans utiliser MSI Afterburrner?

[@geoffreyfleury8447]

how to apply mct on every boot without using msi Afterburrner

[@510Menace]

When I set the min boost clock in MCT it resets the value back to stock. It wont hold the value of 100 less.. Any idea why? 5700 xt

[@itsdili2892]

idk brodie

[@dracktw]

2 much hassle, I went back to nvidia pug and play, sold my 6900xt and never looked back

[@eballerz]

yo bro i just want to tell u there is a community called nimez driver basically they provide amd modded drivers with lost of optimisation and other oem kernels.. can u take a look on this

[@ДенисСтаровойт-д3у]

How to lock gpu clock Nvidia?

[@renzito3627]

nvidia type video like this.?

[@sufyanyounus5686]

using rx 570 driver version 22.7.1 no supported adapter found this error coming when i start the moreclocck application help chris

[@muratcansimsekk]

same

[@streetzoom]

Hi, Chris. Amazing video as always. It looks like many people have the same problem with 5700xt, specifically can't set any min clock, because value reset every time u press set button. Any idea about that? Me personally have the same issue. Tried with different minimum drivers. Just to mention I'm using win11, maybe that is the problem.

[@GoaConstrict0r]

Hey mate I have the exact same problem with my 5500 XT.. pls can someone help ?

[@streetzoom]

@@GoaConstrict0r give me your telegram, I'll send an audio of my fix, because there is too much to type, and my bad written English.

[@lightcore1]

@@streetzoom hey could you share your solution to this to me aswell maybe?

[@vik_theafrican]

need this too

[@streetzoom]

Hello everyone, sorry for the long answer, I'm from Ukraine, and u know, currently, we do have not the best times. Long story short, I was able to solve this problem with MSIAfterburner. 1. First u need to set your Frequency & Voltage and apply settings, (currently I'm using 2000MHz/1050mV profile); 2. Then go to the voltage curve editor, and raise up all sliders(frequency & voltage). Visually it should look like two straight lines, In my case with these steps 2.1. Frequency 1893->1946->2000 2.2 Voltage 1004->1004->1050. 3. Then save your profile again, and apply to startup. So the main idea is to set basic Frequency & Voltage, then play with the curve, and save the profile. Peace for all

[@АлександрПронько-з6ж]

This is don't work with dr12 only supotred games. Please, help me...

[@geoffreyfleury8447]

how to apply mct on every boot without using msi Afterburrner

[@vincenzodaniele2768]

Manual Oc setting on amd software work if profile global and game profile are equal, if you setting profile global normal and game profile oc no work.

[@Honored_One.]

I recently bought this card and upgraded it from my old gtx1660, I use to get 250/300fps on val when I first got my cpu but ever since i upgraded my gpu not only have i been getting low fps but i been having a lot of input lag on 1920x1080p res and I still don't know how to fix it.

[@33void]

more people should do this. especially pro players who play csgo and valorant. great vid as always. can we expect something like this for nvidia ( i know you made a video for nvidia but the example wasnt really accurate because you used a 1050ti)?

[@saiprasad8078]

Which video are you talking about?

[@33void]

@@saiprasad8078 go on fr33thy's channel: 'Best NVIDIA Setting Optimizations For Gaming BOOST FPS 2021"

[@33void]

@A Z pros buy nvidia cards and you also can lock the core on them and it does nothing but good. pros should start being aware of this.

[@stefanpapdi5151]

@@33void simple on amd

[@silverwerewolf975]

"especially pro players who play csgo and valorant", WHy?

[@calmsh0t]

does this work for 7000 series gpus?

[@kelixdepression1563]

Yo can anyone pls help out....I have got tNice tutorials weird problem in soft soft in the soft roll...I can’t see the notes that I am drawing or

[@RobertoFGY]

i keep getting "get init setting failed" and now "set od8 failed" any help ?

[@kubaprzybyowski3788]

hey, did you solved this issue?

[@muratcansimsekk]

no supported adapter found

[@JatXoc]

to fix adrenaline reset on startup just disable windows fast boot. problem solved.

[@xlexed2583]

Fühlt sich viel smoother an als davor und ging auch echt einfach. danke für den tipp hasse amd zwar dafür aber ist ein guter fix.

[@v3l0x24]

What if it doesn't find my gpu?

[@Ayannnnnnn]

adrenalin driver have minimum mhz slider.

[@Lofifilms2]

Lol when I start I go save and I have to at least spend 100 dollars so it doesn’t delete

[@silverwerewolf975]

Emmm, just set min clock on wattman = -100 max freq?.....

[@isiam_]

I can’t find my gpu on MPT “ 6750xt “

[@lorenzoorsetti9875]

does MoreClockTool work for your rx 6750 xt, beacuse for mine it says "no supported adapter found"

[@pluxurykiss6728]

а на windows 7 это будет работать?

[@itsdili2892]

whats the best driver?

[@Super2wild]

i just checked wtih my 6800xt and dont have this problem in heaven got normal boost 2350 Mhz

[@itsdili2892]

how do you save the mct settings

[@MelioAwake]

any1 with r5 7600x rx 6750 xt here ? still facing the same issue I can't use MCT properly smh

[@MelioAwake]

to be more specific the settings aren't being applied at all (I've tried uninstalling my IGPU from device manager)

[@EcclesiaSS]

If anyones stupid like me and doesn't think it's working, launch a game first, play around and then check gpu-z logs lol

[@Creep4EverMV588]

Any way to do it for rx 7000?

[@FTWAlmighty]

Thank you so much huge Gamechanger. Without AMD Adrenalin how do we set memory timing to “fast”. Trying to on MCT using 1 or 2 but it just resets when I try to save to MSI. Anyone help pls!

[@lightcore1]

Have you found any fix to this?

[@FTWAlmighty]

@@lightcore1 I have not.

[@Pacify]

Also how can you cap your FPS without using MSI Afterburner on WZ I use it to cap FPS to 265 on my 270hz monitor and I don't want my gpu pointlessly going over that it does in some areas.

[@SqwashGaming]

Msi to cap frame rate? Are you sure you’re not using rivatuner?

[@Pacify]

@@SqwashGaming yes riva tuner only runs when msi afterburner is running for me unless there is a way to only run riva tuner which I didn’t know.

[@famouz5880]

linux way?

[@geoffreyfleury8447]

merci

[@jwu1572]

I noticed leaving only 100mhz between the low & highs reduces actually gimped my in-game performance on rx6600, set my low hz to 2200 and performance is back.

[@RadRebelMx]

Are you still running 22.5.1 drivers?