LOGITECH G102 - W/ Kailh Silent & Kailh Gm 8.0 Switch!

[@AnggaTirtaFL]

I recently upgrade my old Rival 100 with this Kailh 8.0 and it feels so heavy. Silly me dont see the actuation force tech specs before buy.

[@agsechogd6406]

crap im getting same switches for my rival 110

[@agsechogd6406]

yo, do you still have the mouse?

[@AnggaTirtaFL]

@@agsechogd6406 i do, still rocking this bad boy ever since. As times goes by my finger adapted very well with those Kailh 8.0, but i use it only for work though. I buy Razer Orochi for gaming XD.

[@agsechogd6406]

@@AnggaTirtaFL amazing! i have a rival 110, its yours but with a better sensor. do you think its compatible?

[@AnggaTirtaFL]

@@agsechogd6406 technically aside from Logitech and Razer, any other brands are compatible with aftermarket switches. But just to make sure open up your 110 and see the pins while compare it to Kailh 8.0 pins you find on internet images. Dont buy Kailh just yet, dont de-solder your 110 switches just yet before you really sure the pins are correct.

[@Kasspirr]

Does it feel heavier? I constantly missclicking RMB on my g102 just by resting my hand.

[@xsiwat]

Yes, it is clearly heavier for the Kailh Gm 8.0, but slightly heavier for the Kailh silent.

[@k-yo]

Does it feel mushy?

[@xSO20]

Which do you prefer?

[@xSO20]

is kaihl silent softer compared to 8.0?

[@raistaryt4473]

my zebronics 499rs gaming mouse left click is dead ,can i upgrade it to kailh 8.0 is it ok for fps games like free fire pubg??? suggest me something pls??

[@dopehouse4736]

Are the kailh silent heavy press? I tend to press my mouse buttons on accident a lot

[@Garrett1974]

No they're not heavy, comparable to stock Omron I'd say... although I'm no expert, they feel the same apart from the sound of course.

[@LukeZaluski]

Dream machine DM7 is just an incredible mouse. The swith switches provide speed and precision that increase my reflexes and give me an edge over my opponents. This is a real treasure for every gamer.

[@novell80]

It depends on someones personal opinion which mouse are good or not good. Ever hand is different, everyone feels different, everyone hold the mouse different 😉

[@samaisakmilo36]

ชอบความเงียบของ Silent มากครับ ว่าแต่ฟิวการกดเป็นอย่างไรบ้างครับ ตอนนี้ใช้ razer basilisk อยู่ อยากทราบว่า ฟิวการกดทั้ง 2 สวิชนี้เป็นแบบไหนบ้าง แนะนำทีครับ

[@xsiwat]

ฟีลกดของกระกูล Razer จะออกนุ่ม ๆ แต่ยังมีความเป็นสวิตซ์อยู่ แต่กับ Silent Sw จะคล้าย ๆ คีย์บอร์ดชนิด Rubber Dome นิดนึงครับ

[@thai8841]

WOW, that is actually silent

[@xsiwat]

I entirely agree with you, Thái Hừm .

[@adeyudhapratama4314]

bit the life of this silent is sort, i am replace 2 times in a year

[@xopoc79]

Kailh Silent linear or tactile?

[@ui5008]

ตัว Kailh Gm 8.0 ใช้ดีมั้ยครับ ว่าจะเปลี่ยนมาตัวนี้ครับ พอดีผมใช้ G304 อยู่ครับ บอดี้คล้ายๆกัน

[@xsiwat]

ใช้แรงกดเยอะขึ้นในระดับนึงเลยครับ การคลิกจะมี bump ที่มากกว่าในระดับหนึ่ง

[@ui5008]

@@xsiwat ครับผม

[@amitbikram9031]

hi, where can i get those Skates Pads?

[@smu7373]

Is there a direction for soldering kailh silent switches? Or is it reversible?

[@Garrett1974]

reversible, it's 2 pins, either "on" or "off" if that makes sense. I just installed 7 of them in my G502 Lightspeed and all of them work :)

[@st00pidf0k]

@@Garrett1974 hey, I'm doing the same thing on my G502 Lightspeed soon, how does the click feel? Is it easier or harder to press comparing to the stock ones? I tend to accidently click my right button a lot during gaming lol, if those are similar to stock or heavier it would be epic. Also, did you manage to reuse your mouse feet or did you have to buy a new set?

[@yushaddup2573]

@@st00pidf0k i have mine installed on a razer mouse, it requires a little more force to actuate so I think that would suit your needs

[@KENN-O]

@@yushaddup2573 bro do you know the actuation force of the kailh silent switch?

[@jasonlam6805]

i bought the kailh gm 8.0 switch to replace the switch on my g pro superlight! the stock sưitch g pro superlight is really boring and a bit light! Hope it’s fine

[@gguninstall7491]

gj you downgraded your mouse

[@jasonlam6805]

@@gguninstall7491 wat? wat u say bro hahahaha =))! Remember kailh gm 8.0 is the best switch for gaming mouse! haha bro you have any gaming mouse ??hahaha

[@gguninstall7491]

@@jasonlam6805 funny cause i removed them and throw them in trash for japanese omrons

[@jasonlam6805]

@@gguninstall7491 so very funny, because you had bad luck buying the faulty gm 8.0! Because everyone has recognized it as one of the best switches! did you say omron japan? if it's omron D2F-F-3-7 it's really good, the rest is garbage!

[@gguninstall7491]

@@jasonlam6805 gm 8.0 are not good hard to press and mass produced 😡😡

[@andresirt]

What's the lifespan of the silent switches? Do you know which one is the one that fits a Logitech G600?

[@Cuttablebeast1]

Well theyre switches so unless oxidations kills it then it should last 10m+ clicks

[@syarifairlangga4608]

@@Cuttablebeast1 no.. i ask reddit and silent switch has very low lifespan because it made for Productivitt work not gaming

[@Misutoslope]

@@syarifairlangga4608 I've been using these switches in my modded mouse for well over a year daily and they are fine.

[@syarifairlangga4608]

@@Misutoslope is it for gaming? Or work?

[@Misutoslope]

@@syarifairlangga4608 Both for gaming and work (8-12 hours daily). I'm an avid gamer and have used many mice. Since switching to these, I mod every mouse I get with them.

[@pH-uj1cp]

สวิตช์เงียบตัวนี้กี่ล้านคลิกครับ

[@bobthebuildaa]

how much do the silent switches weigh compared to stock?

[@xsiwat]

They both weigh less than 1 gram.

[@PoogieWoogie]

Can i upgrade this Kailh gm 8.0 for my cooler master mm711?? Currently it has omron 20m switches and it seems the left switch is dead so im planning to upgrade

[@xsiwat]

yes it can

[@blitzkriegvonkonig]

why do you cover the switch with tape when soldering? do i need to do it?

[@xsiwat]

You don't have to do it. I just tape it so that the switch is as close to the PCB as possible.

[@Ezio470]

As someone pointed out in another video doing the same mods, you can simply not remove solder from the last pin. Just heat it up and pull fast leaving the solder. when inserting the new switch, just heat up the solder already on the board and insert switch from underside and hole until its cooled. then apply solder to the other pin(s) to complete the swap. this way you don't need tape or anything else holding it in place when soldering first pin.

[@Rayan---il5pf]

Can I use Kailh gm 8.0 switch on Logitech g402?

[@novell80]

Yes

[@LinMyintMyatKyaw]

Does it drag click 💀 sorry for goofy but can i know

[@lkohli]

try ttc gold dustproof

[@xsiwat]

It's interesting, I'll definitely try it.

[@syarifairlangga4608]

I regret buying Kailh GM 8.0. Its good for shooter game but very bad for game which need spam click

[@georgepierre3594]

Yep the release force is too much. Try huano tranparent blue pink dots, or ttc gold 30/80ms those are good for league and dota 2.

[@estebannicolas6741]

​@@georgepierre3594 huano or ttc i need the ligthtest possible sw😅

[@sync532]

@@estebannicolas6741 huano blue shell red dot and green dot

[@KYO_999]

​​@@georgepierre3594I play both shooter and spam click games (most of the time fps though) what should I get?