Logitech Rally Plus - Overview, Setup and Demo

The Rally Plus package takes the ample 4K pan-tilt-zoom (PTZ) camera to the next level, offering a full meeting room experience for the enterprise conference room, using Microsoft Teams Rooms and other platforms.
In this video, I provide an overview of the various components that come with the Rally Plus, go over the cabling and setup of the overall MTR system, demonstrate it's use within a Microsoft Teams meeting, and demo the management and use of the Rally camera itself!
Logitech Rally Plus: amzn.to/3ihHRuz
Disclaimer: the above link is an affiliate link, and I may be eligible to earn a commission for subsequent purchases.
Thanks for watching, and please Subscribe!
KZbin: / getcsjosh

[@1slothua1]

Great well rounded review. Perfect for people in doubt what “web/conference” cam they need for their business and if it really does what they say! Great job!

[@patrickwalter8175]

Thank you for this very well put together video! Keep up the good work!

[@damianmiller261]

Excellent presentation video and wholesome explanation of the characteristics and working of the Logitech Rally camera.

[@3000cerber]

Thank you friend!! Hello from Russia!

[@ExpertOfThings]

Hello back, from the U.S.A.!

[@NIckWorrall-g7l]

Very good Video, Only concern, the Music sounds like its from a "blue movie" :D

[@AhmedSamir92]

How did you configure the NOC for MS Teams room?

[@ariannagasperini1440]

Super useful video! I have one doubt: can the rally plus work without the Intel NUC?

[@TedTabaka]

Very well done! Thank you for the video.

[@ramawilyarto5227]

Hi Josh, im just curious if we plug a laptop on hdmi in but not plug usb cable, will the sound still go to rally speaker or tv ?

[@pasiutrial]

Hi, have you found an answer to this, please?

[@DJ_Driven]

With the laptop connected via the HDMI cable at either the display hub or tap depending on which system you're running, the sound will come out the rally Plus speakers.

[@kap2424]

great video. Based on the demonstration, this is for conference rooms dedicated for conferencing? Would this be applicable for hybrid classrooms where a PC, document camera, and guest devices are used and already integrated into the room? We currently use the Logitech Group for our smaller classrooms because it can plug directly into our lectern PC and act as a USB webcam for recording or video conferencing with our university's LMS or other required systems (Zoom, Teams, Webex, etc.) Can this device be a USB webcam, speakers, and microphones for a classroom like the Group can? We love the group, we just need a system that is designed for bigger rooms (bigger speakers, better mic coverage, etc.)

[@tommyrihu824]

Hi great job, are where any settings for speakers ?, can feel sound from the speakers feels al little bit as in a aula

[@colinkness4197]

I would like to see a ceiling mount and where to run usb cables for mic pods, Also do you have to use the cat 6 cable like older logitech systems proprietary ?

[@junejhunkie]

If in stand by mode? Would it turn on the displays(consumer tv) via CEC? How would you go about this?

[@MattDebouge]

Excellent video, What about when we have a zoom meeting and want to just use the cameras and speaker , is it possible to bypass the tap and nuc without unplugging cables etc.

[@ExpertOfThings]

You can configure the system with the needed cables for BYOD scenarios, yes.

[@heruuu6114]

Hi, Please help. few weeks ago my logitech rally bar was able to auto-frame, but now it's not auto-framing

[@raffydifrancia8179]

Great video! Question: When buying this product I am on the Logitech website and some photos show the Logitech touch pad (shown at minute 13:50) but then when I go to buy it it doesn’t seem included! Can someone please help!

[@ExpertOfThings]

Hello! You can get the complete Rally Plus system here: www.amazon.com/Logitech-Rally-Ultra-Ptz-Conferencecam/dp/B07JGHZKYW. However, to also get the Tap with the NUC (the required PC for Teams Rooms), you can order here: amzn.to/2ADr7gH. Note, that last link also includes a Meetup camera, so if you want just the Tap + NUC, you would want to search for the Logitech Tap Base Bundle.

[@maydalorenarivaslandaeta762]

Hola, nosotros adquirimos rally plus con ctlf chromeboox meet system , el problema es que este dispositivo al parceer solo admite una pantalal 4k y no 2, en este caso tenemos 2 smart tv y solo conecta 1 al sistema de google meet , ayudaaaa

[@reydeleon3050]

hello.. does rally plus support autimatic video framing? can you make an actual video showing this features?

[@LCort101]

Nicely done. Appreciate the knowledge sharing.

[@emekanwosu6786]

Any idea how to connect ensure CEC is active for a Samsung 4k tv (display) and the Rally camera/Bar system powered by the NUC

[@dadangwahyuwijanarko6282]

Do you know why i can't present something form TAP, when click share button , then there is no devices connected error messages ?

[@yarelis2364]

Hi the control of my rally camera not working what should I do? Change it or is it a problem of batteries? Help me pls It's my work tool

[@pasiutrial]

15:10 does sharing through HDMI cable connected to a Tap panel works exactly the same for Zoom native rooms? Do you have to change some kind of setting in order to be able to share audio as well?

[@ekongcharles8343]

Hello dear, please can you help. I am testing my new Logitech Rally Plus System conference Kit, the Camera and dual are not working. please can you help???

[@mahneljamemusic6109]

hi ,the purpose of NUC is for the Logitech camera only (Screen 1) and for presentation is BYOD (Screen 2). meaning we required two screen for this kind of setup we cannot use one screen with 2 split?

[@Kcriton]

Thank you, really imformative.

[@mitchellhammer2388]

Hi Josh, great video. Does the Rally Plus natively support BYOD?

[@mitchellhammer2388]

also does the rally plus ship with a usb strong cable included?

[@Unixxx_21]

Good sir what happened there at 14:30? You have camera feed but your rally camera is not pointing at you? You have a second one?

[@MrMayes11]

Awesome video!

[@张艾-g8c]

Hi Sir, I've been facing a question that's been on my mind for a few weeks, I currently have two monitors, similar to your setup. When I initiate a Teams meeting using the Logitech Tap, one monitor show camera, and second screen display the content via HDMI. It all works same as your . However, when I start a Zoom meeting, i found an issue, one monitor show camera, and second screen show black, nothing shows out in second screen event thought the HDMI is connect .

[@ExpertOfThings]

Hello! Thanks for watching! To be honest, I'm not sure what's going on there. I would recommend reaching out to Logi's Support team on that one.

[@erickligueno509]

hola amigo tengo un problema hay veces que la cámara no levanta cuando quieren tomar una Reunión por teams, que podria ssr

[@shamiir1812]

Is there a way to factory reet the hubs? None of them has buttons

[@KYspeaksfood]

Great review, I was wondering if there's a way to configure the RightSound settings? We have similar set up "Logitech Group" but been having issues with background noise esp. when not talking

[@RRockyAv]

hi bro how i can have the dual output extended mode ?

[@sansan7903]

Thanks for review. We are considering to use rally plus for Webex/teams/zoom meeting types from PC without a tap. Is rally plug auto plug and play in any type of laptop for joining meeting/content sharing? or dedicated PC required to standby?

[@adamberns2064]

Sorry for the late reply. You probably figured it out by now, but Rally is just a USB device. So it will work on any PC or Mac.

[@MartialArts369]

Hi thanks so much for the video! Do you know how to turn off the camera's motion sensor? Every time someone moves or talks the camera follows him, even after I have set PRESETS

[@ParthBhagat-p5v]

What NUC did you use for connection of dual displays?

[@biscuitbytes]

Can you please clarify what you meant by M.I.D.I port on the back of the Rally Camera, next to the USB C port that connects the camera to the display hub? I can't find any information on this port on the official documentation or any data sheet available.

[@biscuitbytes]

nevermind u just butchered the pronunciation of MIPI. scrub.

[@angeldiaz8183]

Excellent video!. just one question, Is the HDMI cable for laptops to share screen coming from the HDMI In ports of Table Hub?

[@tomfisher9353]

Can you forego the table hub and run your the mic's directly to the display hub?

[@DeSibyl]

Do you need the Logitech Tap IP or a NUC? Is it possible to simply just plug a computer into the table box and have it run zoom and share meeting to the TV(s)? Also, what OS does the NUC run that allows this setup? Is it a custom OS? Can I simply just get a raspberry pi, or a extra laptop, and setup the OS on there and have it there dedicated?

[@ExpertOfThings]

The only supported path involving the NUC involves a pre-configured image of Windows 10. Trying to make this work with your own custom OS brew is both unsupported, and likely to end up with a non-functional setup.

[@DeSibyl]

@@ExpertOfThings Alright, so I assume you need to get this NUC from the Logitech store or?

[@ExpertOfThings]

@@DeSibyl yeah, they come as part of a bundle. Your Logitech reseller would definitely be the correct point of contact.

[@calvinchanys9346]

What OS is the NUC running? Is it a normal Windows OS and with the connection to the tap? Once connected the tap, screen on the tap will just show the meeting scheduler? If I don’t want to use a NUC, can I use any desktop PC to replace the NUC?

[@pasiutrial]

In most cases it's running Windows 10 IoT. Yes, Tap will show the meeting scheduler and other controls, it's gonna display MTR app layout. Yes, you can use a regular PC to run MTR app on it.

[@lucimarbianco5302]

Excellent job bro

[@kevinkeo4]

Great video for review in setup for research before wanting to purchase. I do have a question, does the Rally Plus and Tap require the Intel NUC to run or can the NUC be used without it.

[@sergeykopylov652]

12:29 Where is CAM Mute button??? How do I mute my video if I need?

[@vedatpisirici]

How is this system connect to the internet? Did i miss that part?

[@ExpertOfThings]

There is a wired ethernet connection on the NUC

[@chuckgrigg9481]

My Camera seems to have just stopped working. Is there a way to reset it?

[@ExpertOfThings]

Any more details about the part where you say it stopped working? Any specifics?

[@francoislamontagne8707]

Hi Josh. Can I used 3 monitors with the Logitech rally plus ? Imagine that I'm using a BYOD. So:USB-C for the Rally and a HDMI out on my laptop. Can I used the 3 monitor at the same time?

[@ExpertOfThings]

If you are talking about having two displays in the room, and then connecting your laptop as the third display, then yes, all three displays will be accessible.

[@emonreyes7658]

its is good for large conference room?

[@ExpertOfThings]

Yes, that is the correct room size for this solution.

[@robmorin]

Hey Josh, So if i understand correctly, along with this system you also need a PC of sorts? As I am also looking at the Google Meet Hardware kit as a comparison, but that contains a PC with it. Thanks

[@ExpertOfThings]

Yes, the PC completes the room. Or if you want Android, Logi is releasing the standalone RoomMate compute for it.

[@Ndpmnyc]

Great video, I saw a bundle with Logitech Rally plus and Lenovo HUB, how you connect both of this?

[@ExpertOfThings]

I know there is a solution there, and I am actually getting a Lenovo HUB in today. I will dig in and find out the answer. If it is possible, I might crank out a brief video on that as well!

[@Ndpmnyc]

@@ExpertOfThings Thank you buddy!

[@DanielWillen]

@@ExpertOfThings Do the "end call" etc. buttons work with the Lenovo HUB and the Rally on the remote? Also, can you can adjust the camera from within the teams meeting? I've seen that feature in other hub devices.

[@ExpertOfThings]

@@DanielWillen Hello Dan! Unfortunately, I am not able to confirm or test either of those things at the moment. The Lenovo Hub being in the mix as a certified solution should not take away any functionality, though, so you should be good to go with the Hub. Also, I believe that you can indeed control the camera in-meeting with Microsoft Teams, but unfortunately, I am not able to verify at this exact moment.

[@adamberns2064]

@@DanielWillen There is no PTZ within the teams app (we have been working on this with them for a while on this). The end call button should end the call since it just sends a standard HID command.

[@abdielgonzalez5997]

Can this camera be installed on a ceiling up side down?

[@ExpertOfThings]

Yes

[@ruanrichter8623]

Hi great video, is there any device that can support Teams and Google meet?

[@ExpertOfThings]

Unfortunately, not on the native platform, no. Check out my video on the Logitech Swytch for a possible solution.

[@ruanrichter8623]

@@ExpertOfThings Will check it out now thank you.

[@DJ_Driven]

@@ruanrichter8623 I'm pretty sure Logitech now has a Google meet unit available.

[@fziv31]

hey, I just watch your video. I wonder, if you mute one mic pod, will it mute all the mic too?

[@ExpertOfThings]

Yes, it mutes all at once. Thanks for watching!

[@michaelolson5688]

How do you get the camera to return to the default down position? When we push the video mute the light turns off, but my staff is convinced the camera is still recording.

[@tdar7890]

Hi Josh, great video u provided. i have several question regarding logitech rally plus with nuc, hoping u could help me : 1. if my NUC already bundled with Microsoft Teams Room (MTR), can i get back to windows 10 desktop home screen ? 2. after i setup the account of MTR, i couldnt configure my camera properly. theres an issue notification "the camera not certified". I tried my rally plus connected to my laptop (usb), and theres no issues with the camera (logitech sync). Do u have any idea to solve this issue ? thanks in advance. GBU

[@brianlev-ari1222]

Hi, thanks for the great video, We are using The Lenovo Hub 500 with teams and the Rally in a few CR rooms, we were facing issues where the screens were some sort of disconnecting / booting and then recovering. We were not able to solve it and finally when we took a long HDMI cable to the TV directly form the Lenovo it solved the problem. This means that we are not using the Rally for Video, only using it for MIC's Sepakers and Camerra and the true is that it is a bit disappointing, I would appreciate to know if you have seen this issue? We talked with local vendor and got a few tips such as not using 4K, but we were not able to solve it...

[@bangca16]

Hi Brian, we do like you done as well.. the table hub can't share the display directly to TV, so we connect the Hub 500 to the TV with the long HDMI..

[@brianlev-ari1222]

@@bangca16 The intension was that the table Rally transfer the Video to the Wall Rally and then from there to the TV, but it is not working smouthly

[@pasiutrial]

Great video, thanks a lot for your effort.

[@jmassaro87]

Great video. 1. As far as the "ethernet" cable that connects the display module and table module together, is that just a standard Ethernet cable? In order to make my room clean of wires, I'd need 50 ish feet between those 2 devices. (up wall, over head in ceiling, down wall, through channel, up to table) 2. This can be used without the NUC and Tap correct? If we just wanted to have presenters bring in their laptops to present, plug n play once all is set up( camera/mics/speakers, and projector) . Or is there drivers it needs on individual computers, or is that where the NUC comes in?

[@TaufikHidayat-tg8gy]

1. you can use ordinary cat6 up to 50m 2. you can use w/o NUC or TAP, Plug And Play no need driver manual install.

[@itmall8325]

Which one do you prefer? Rally Bar or the Plus? Also, are you familiar with ow easy it is to remove the bluetooth capability from the Rally Bar or do you all have another sku with no bluetooth and wifi?

[@ExpertOfThings]

I am actually no longer at Logi, so you would have to inquire with them about their SKUs and the removal of Bluetooth. As far as I preference goes, I would probably lean toward the Rally Bar, but it is of course all dependent on the needs/requirements of the specific room.

[@randomlyspecific1824]

Hi. What if I don't have the Logitech Tap, can I plug in a laptop to the Table hub to share my screen? Thanks.

[@ExpertOfThings]

Without a Logitech Tap, what screen are you managing the meeting from? Essentially, it sounds like a scenario that would be "unsupported", even if you found a way to make things work. A touch control panel is a key part of the setup.

[@randomlyspecific1824]

@@ExpertOfThings Thanks. I just found out that you can use the screen share adapter for external screen sharing, without using the Tap. Sorry, newbie here.

[@dizzykay]

​@randomlyspecific1824 can it work with laptop without tap

[@newgenart482]

first thanks for the great video. I was able to set it up but am not sure if the camera has auto zoom or frame correction?

[@MrMichetti]

Grate video, thanks! I Have two question. 1.Can i connect the laptop to the Table Hub Via Usb if in my room i can't install a dedicated PC? The real reason is because there are more people who want to use the system with their laptop. 2.Is the Rally System Plug-and-play like a Logitech Group System? Thank you very much!

[@ExpertOfThings]

For 1., are you asking if you can replace the NUC with user's laptop via USB? If so, not quite - you would need to have a "compute" device in the same place that the NUC is. If that is NOT what you are asking, and you just want to share your laptop desktop into a meeting in the room, then you can do this via the HDMI that comes out of the Tap (as seen in the video. For 2. Not sure what you mean by this. Plug & Play in what sense? Do you mean that you can simply plug the Rally & speakers into a laptop and start using it as a camera and speakers?

[@emanuelemichetti]

@@ExpertOfThings Yes, I wanted to understand if it is also possible to use the Rally Plus also as a common webcam connected to a laptop, such as the old Logitech Group

[@adamberns2064]

@@emanuelemichetti Yes you can use it as a regular USB device.

[@ivanpereirarodrigues2445]

great video man! We must have the tablet or can the meeting be organised by a laptop or computer?

[@ExpertOfThings]

I suppose that depends on whether you want to go a supported route or not. In short, for a supported documented scenario, you will want to use the tablet.

[@adamberns2064]

When all said and done, this is just a USB device. As long as your computer supports USB3, you should be set.

[@itcafe8648]

I use rally with MS Teams but one issue i am having is that Rally cannot remember the preset.

[@DJ_Driven]

You're going to have to download the camera app to configure out of the default and auto adjust off. You can also set the camera presets on the remote watch the full video he discusses it and should answer your question.

[@sicem6]

Can the Rally system amplify the person speaking in the room? Such as, if someone is speaking at a podium, can their voice be amplified through the Rally so people in the room can hear them better as well as picking up their voice for remote meeting attendees? I can't seem to find this out anywhere... Guessing maybe not but can't find the answer one way or the other...

[@ExpertOfThings]

It can not use its own mics to amplify through the Rally speakers, no. If you had the person at the podium using a mic that was being used in another computer that was joined to the same meeting, then it is possible to achieve something like this. But it is more of a workaround than a design of the system.

[@sicem6]

One other question I would have… If you know the answer… Can the TV hub be plugged into a third-party speaker system? We have both speakers in our conference room we would like to use and it would be nice if we could interface the rally plus system with those speakers somehow. Guess I’m wondering what the output is on the hub and if it can be plugged into a third-party amplifier if necessary. Not sure if you’ve tried this but maybe you could point me somewhere I could find answers?

[@ExpertOfThings]

@@sicem6 the answer is that it may work, but likely would not be a supported configuration by Logitech. Depending on the platform, however, you will find different information. In the Teams world, you can check out these certified peripherals for the room systems, that expand into speaker systems, mics, etc... www.microsoft.com/en-us/microsoft-teams/across-devices/devices/category/room-systems-accessories/73

[@DJ_Driven]

@@sicem6 No you have to use all rally Plus components for the system to work.

[@josimarmdasilva1757]

hello friend, I have a doubt: there are several models of this kit on the market: Logitech Rally Display Hub V-R0009 P/N 839-000539, has the Logitech Rally Display Hub V-R0009 P/N 839-000540, .... I wanted to know if the Display hub is compatible with another kit model....example of these 2 that I sited above ????

[@ExpertOfThings]

Unfortunately, I don't have much insight into the part numbers and what they include. I would suggest contacting Logitech Support or a trusted reseller.

[@josimarmdasilva1757]

@@ExpertOfThings hello again, I managed to solve it, I bought another used display hub and it worked here, working wonderfully.

[@DJ_Driven]

Have the full spec rally plus system including nook installed. Just set up two brand new Sony 4K TVs and cannot get the second screen to work. Logitech tech support said to downgrade to 1080p but I do not find that acceptable...does anyone have a solution to run both screens at 4K?

[@ExpertOfThings]

Are you running Teams? The system was only designed to support up to two 1080p monitors. I know with Teams, Teams video meetings only go as high as 1080p. So many certified room solutions are not designed with a spec to support 4k monitors...

[@DJ_Driven]

@@ExpertOfThings Yes, it's the full-blown rally plus system with both the tap and nook. Will probably have to reconfigure the resolution settings on the Sony XR-8590K 4K TV's down to 1080P to get the system to work.

[@asapyeti]

Is there an option to turn off the tracking?

[@ExpertOfThings]

Yes.

[@jasonklems8584]

Thank you for the review. We were considering it, but still not sure if we should pul the trigger. Im not why you would need the NUC unless it is being used for a dedicated Conf room PC. Our needs would be for laptop users; both windows and mac os. Do you have any experience setting this up for Zoom meetings?

[@ExpertOfThings]

Unfortunately, no, no Zoom Rooms experience as of this time.

[@adamberns2064]

Zoom Rooms are supported. This is just a USB device when all said and done. So if you want to plug it just into your laptop like a BYOD into a room, it will work fine. Just remember you will need to let Windows Update bull the Microsoft USB driver (which you probably already have). Nothing to do on the Mac side.

[@alexfran7180]

Hi. What is main difference btw Logitech rally Plus vs Polycom real presence group 500- 720p w/ee4 wich one you suggest for large rooms

[@ExpertOfThings]

Hello Alex! Great question. Unfortunately, I have no real hands-on experience with the Poly RealPresence solution, so I couldn't legitimately weigh in on that one...

[@over4452]

how do i connect the rally plus with a macbook? is this possible?

[@ExpertOfThings]

What is the scenario you are specifically looking for? Connect the Mac during a meeting to share the screen, or some other use case?

[@tomstone3749]

What software runs on the compute unit to provide what's shown on the displays? I've looked at several videos like this but the 'compute' part seems to be omitted - is it something that's Room System only?

[@ExpertOfThings]

The OS on the compute is Windows 10. However, what you see on screen is the Microsoft Teams Room app.

[@tomstone3749]

@@ExpertOfThings Got it, thank you!

[@DJ_Driven]

Technically it's running Windows 10 Enterprise IOT on the nuc displayed on the tap.

[@shahar99]

This is awesome! Thanks!

[@catherinelongo2368]

WHat is the best TV/Monitor to use with the Logitech with CEC?

[@ExpertOfThings]

There isn't actually an official recommendation on that - it just requires doing a bit of shopping and feature comparison. I use Samsungs, and I know several other that do as well, and some use Dell. There are a good number of options out there, but no official recommendations.

[@funkytransport]

i found this confusing, what with the workaround you had in place....

[@MrDanyfication]

Rally interested to understand if it supports NDI??

[@dannytran8475]

Can I connect the Speaker and Mic directly to an Intel Nuc? Or do I need those 2 hubs?

[@ExpertOfThings]

I don't believe there should be an issue with a direct connection. The Hubs just allow you to spread things out and break them up a bit more, in a tidy way.

[@ComputerBreeze]

Great video! We are looking to upgrade our conference room equipment. The problem we have is we do both Teams meeting and Zoom mostly from outside customers. Is that possible to do with this system? Thanks.

[@ExpertOfThings]

Thanks! Yes, this is possible, depending on what exactly your requirements are. You can't just switch back and forth between the native Teams and native Zoom software; it runs with one software type, or the other. However, Microsoft Teams Rooms now allow you join Zoom meetings directly from the Microsoft Teams Rooms interface. Simply invite the MTR to your Zoom meeting, just like you would for a Teams meeting, and the invite will show up on the Tap, allowing you to join just like a Teams meeting. Now, the experience will not be the entire feature set for Zoom, but you do get the some AV participation.

[@ComputerBreeze]

​@@ExpertOfThings Thanks for the responds much appreciate it. I am going to contact Logitech to figure out the best configuration that will fit our needs.

[@brianlondonio883]

how long is the microphone cable included?

[@ExpertOfThings]

The cable connecting thevmic Pod to the Table Hub is 9.6 ft.

[@DJ_Driven]

It will probably be too short and require an optional mic extension cable for another $200 like my setup did.

[@davechitty7700]

As I understand it the HDMI ports are pass thru from the 2 hdmi ports on the Table Hub. They are not there to connect your monitors to the System. I could be wrong.

[@DJ_Driven]

Yeah it's pretty confusing unfortunately the display hub HDMI pass through ports are very glitchy. It's best to go directly connected to the back of the nuc like he did in the video. I also had to run an HDMI to USB-3 adapter for dual TV screen setup as he did in the video.

[@aldocristiancarmona74]

hello. Could you explain to me how to make the connection for 2 TVs? or what should I buy to do it

[@aldocristiancarmona74]

​@@DJ_Drivenhello. Could you explain to me how to make the connection for 2 TVs? or what should I buy to do it

[@mohammadarabdamaireh7136]

Great job! I have 2 questions: 1- Is it possible to use Logitech Rally Plus as sound system for internal meeting? i mean in case no remote conference. 2- Is it possible to integrate Logitech Rally Plus with another sound system? for example, connect Mic Pods to existing Sound System (amplifier, loudspeakers). Thanks.

[@adamberns2064]

Sorry for the late reply, probably not relivent anymore, but it depends on the size of the room. The speakers or not that powerful. I would recommend use a DSP for a larger space. And use the audio from the PC

[@AnnJillyFabian]

Hi, may I know what package did you get? Does the Logitech Rally Plus comes with a TAP and NUC also?

[@ExpertOfThings]

The Logitech Rally Plus does not include the Tap or the NUC. You would have to purchase those separately, or bundle them where available. I obtained them separately.

[@joshuasmith5957]

Hey AJ, I'm part of the Logitech sales team. We do have room bundles available that include the TAP and NUC. Let me know if you want more info.

[@lourwana]

Thank your for that video

[@ExpertOfThings]

My pleasure!

[@DanielIbM]

Allows H. 323 or SIP video calls?

[@ExpertOfThings]

Dependent on platform, yes.

[@abbas1778]

Hey bro how can I use this for zoom conference...

[@pasiutrial]

Normally, just like for Teams.

[@eWhizz]

Does the table hub always need power?

[@ExpertOfThings]

Yes.

[@eWhizz]

@@ExpertOfThings No PoE?

[@DJ_Driven]

@@eWhizz No poe AC powered required.

[@eWhizz]

@@DJ_Driven Do you know how many Amps are required? Perhaps one of those PoE to DC plug adapters would be good to provide a single cable installation.

[@DJ_Driven]

@@eWhizz Poe injectors I've used are 56v the hub needs 120v. Maybe in the next version Poe and or wireless would be an option. This system is a struggle for anyone that likes super clean OCD installs with cable management.

[@hgva76]

This product is good but when you need to extend the cables you will run into trouble. Check the room you're using it for first.

[@TriXjaH]

I just don't get why they introduce an extra strong usb cable for the Logitech TAP when combined with this system. It requires a lot of companies to lay another cable between the meeting room table and display.

[@ExpertOfThings]

Well, the Tap can be used independent from the Rally Plus, so without the Rally Plus (using something like the Meetup for example), you wouldn't have that eternity cord between the two hubs to deal with as well.

[@Danceswithwolves79]

is the quality shitt bc you got it from a screen cap because i swear it looks worse than my brio. this is a 1400$ camera i need to know if its worth it or if i should get a dslr

[@ExpertOfThings]

Which portion are you referring to the quality about? Where in the video

[@l00tur]

Very possible that the quality could be getting knocked down from the USB to HDMI converter. I've never seen one in action that worked as well as a native connection. Something to keep in mind.

[@DJ_Driven]

Just did this exact unit setup in a 12 person conference room. The video quality issue is having to use the USB-3 to HDMI adapter into the nuc that screws up the display quality settings. It's not the adapter itself it's having the adapter connected, as there's only one HDMI port on the nuc. One screen is bright and vibrant the other screen is dull and washed out. Flip flops and it's not the adapter it's just having a second screen plugged into a nuc that doesn't have the dual HDMI ports. It's a very glitchy system there is a lot going on to try to make it right.

[@Iwriteyourlight]

Great informative review, horrible audio though, I wish if we could have heard the audio from the system in question

[@Hollowind_]

Hi Josh! I've been watching this video and the more recent one on Lenovo ThinkSmart Hub 500. Great guidance, so first of all - thanks for them both! My question now is - is it possible to combine the Rally package with the Lenovo ThinkSmart Hub? The reason I wonder is, I would like to be able to use the PTZ camera and the extension microphones with the Lenovo Hub. We have heard that, for bigger rooms, the built-in 360 degree microphone might not suffice (and also draw some noise from the hub itself!). But buying the entire package with the screen hub and table hub, seems unnecessary since the Lenovo controls the camera input, HDMI from manual computers etc. But without the screen and table hubs, the microphones might not even be able connect into the Lenovo hub's own input slots, right? Would love to hear your thoughts and recommendations. Cheers!

[@adamberns2064]

Yes, Rally is compatible with ThinkSmart Hub. You do have to use the Rally Hubs, If I understand the question right.

[@ebenezerhayford2855]

My touch pad is not coming on so am unable to pair with the code

[@ExpertOfThings]

Sorry, what are you trying to pair? And when you say TouchPad, are you referring to the Tap?

[@Jongraphs8600]

How do you get these devices? Are these demo units you received?

[@ExpertOfThings]

Yeah, that is usually the case for the devices that I showcase in the videos. Stuff like the Rally Plus usually needs to get sent back, though, when it comes to demo units.

[@eddyrichard5284]

Por qué los titulos del video me salen en español pero el video esta en ingles

[@christianramos-angelucci7773]

Can you install external additional speakers?

[@adamberns2064]

No. However, the connectors are mini XLR. But the cable length and power for them from the hub is designed for that cable length. However, you could, unsupported, plug that xlr from the displayhub, into an amplifier, but the sound sync may be off.

[@marceloamaral7007]

Vídeo muito bom! Parbéns!

[@buttlofter3194]

Great video Josh. Since you’ve had exposure to several of the MTR hardware sets now, do you have any recommendations - ie Yealink vs Logitech? Just switched over to MS phone system and was about to buy a conf room phone when I discovered that Rooms is a thing now, so I’m looking to outfit our 20-person conf room with a MTR setup. The main TV display and the conf table have a sizeable gap between them. Seems USB cable length limits might be a problem?

[@ExpertOfThings]

I can't really say that I have recommendations of one vendor over the other. However, I will say that that USB Strong cable that bridges the Rally Plus between the front of room and the conference table is not only a sturdy cable, but very lengthy. It might meet the gap that you have to work with...

[@justinthomas2880]

@@ExpertOfThings Josh, where are we gonna see hot-swappable rooms? Something that feels more PC-based; choose Zoom, Teams, etc... on a whim. I know China has a product, MaxHub (I think that is the name) that you can load Poly Real Presence software, Zoom, Teams, etc.... But, a lot of folks in America cannot use Chinese products, if they are involved in defense sector or anything just at the confidential level.

[@josephgogan6981]

Any intention of doing a Logitech Swytch demo?

[@ExpertOfThings]

I have every intention of doing any demo that a vendor is willing to provide a device for! ;-) If Logitech were to throw a Swytch my way, I will definitely do a demo video at that time.

[@adamberns2064]

@@ExpertOfThings Let me see what I can do for you on that front. IM me

[@TMProjection]

this seems way over complicated why would you need a NUC, you shouldve opened up with reasoning any auto tracking features?