Loki’s Crown with a custom display base - Designing, Printing & Painting N’stuff

[@UncleJessy]

Holy stunning build man!

[@PropsNstuff]

Thank you so much for saying that buddy😁 Didn’t get around to it today, but the 3D model will be up on Thingiverse tomorrow👌🏼 And thanks again, cus I know you see a lot of props, and prop builds🦾 Have an awesome summer Sir, cheers😉

[@rehon101]

Hi

[@michaelrosenlof1084]

Very Fun Build with Amazing Techniques-Thank You ✅✅👍👍

[@reigneeusebio3090]

Please upload more often! Cant get enough of your videos and have watched probably all of them over 5 times!

[@glosi83]

Awesome, Rune 👍

[@PropsNstuff]

Wow, thank you for that sir😁 Og ha en flott sommer kompis😉

[@mikeregimbald8225]

Fantastic Build , Loki would be jealous.

[@dermonch7959]

Another astonishing build, well done! Always a feast for the eye.

[@PropsNstuff]

Dank, dank mine herr😁 You’re to kind! Have an awesome summer, cheers😉

[@MeganeFosteryukina]

This is just Amazing ! Thank you for sharing all the process , you're awesome .

[@PropsNstuff]

Thank you so much Yukina😁 I really appreciate you saying that😉 Have a great one, cheers

[@pedrozucarato1595]

absolutely beautiful, congratulations on the work

[@PropsNstuff]

Thank you for saying that Pedro😁 Have a great one, cheers 😉

[@moffin25]

EPIC MAN!!! Amazing job.. gets better each time!

[@PropsNstuff]

Tanks buddy😎 Was a must make prop though! Its just soooo cool😋 Have a great vacation bro😎

[@minesufer]

An amazing build 👏 would love to see a video on your spray booth set up !

[@PropsNstuff]

Hey there Matt😉 Thanks, I appreciate that a lot😁 And yes, the spray booth video is Coming soon! Have a good one, cheers

[@-MrFozzy-]

Think we’d all appreciate a build video on the uv box sir! It’s lovely

[@RichardThompsonCA]

That came out awesome!

[@gonzalodurand1778]

Looks great! you are a great artist

[@equalique1]

Looks amazing!

[@ghostbiker7755]

amazing work man looks great

[@josefigueredo]

Epic work. I always learn a lot with your videos.

[@AlanRorrison]

Fantastic work Us and E L panel for the light

[@AAA-dy9hj]

I love ur stuff man

[@LordOfJazz]

I know I'm very late to the party but you might be able to adapt the foam material they use for NeoPixel Lightsabers to diffuse the LEDs. Great build and very inpiring. Thanks for sharing!

[@RogerYargen]

Hey hey, first of all: once again great work 👍 For the lighting Problem you could try LED Foam which is used by Cosplayers for their props and you could/should use an LED Strip with higher LED density to get an better lighting effect with lesser spots. Also you could use an arduino with an LED Panel, there are many options. Keep up the great work 👍

[@0XxZachAttackxX0]

Try sanding the hell out of the inside face of the crystal portion with really rough sand paper. Should diffuse the light pretty well, packing foam works great as well. Looks great can't wait to use this paint technique!

[@CosminNeagu]

Instead of multiple little sources of light, you should've gone for one centralized source. Like one of those LEDs from flashlights. A big, difused LED will work better.

[@kerem2939]

Best youtuber.

[@mrjokable7046]

Love your props. As for the lights, I would try the flexible 3mm filament lights off of aliexpress. Unfortunately the wait time for them is two months to the US but I have had really good results with stuff like this.

[@JoshuaZangari]

Frost the inside of the jewel really well by sanding, then shine the LED's into the polished edges of the jewel at key points. It should spread the light out more uniformly.

[@lokilover1315]

I don't know much about resin printers, I watch Uncle Jessy though, and I do have tons of other crafting experience. Anyway, I know how you can get the perfect color, that you can see though, while still discharge light, so it bonces around as it should. After your print is done, and your ready for painting, paint some Airbrush Medium, on the back. As it is drying, take a paper towel and dab it dry. The more medium you use, the cloudier it will get. That couldy behavior will bonce the light around. But your medium will fight back in trying to dry clear. The result is kinda like Carnival Glass.

[@nassimabdesselam2170]

Great job man ... for the green light what about you sanding from the back of it? i think it will do the job

[@black63100]

very nice work, do you have the possibility to make a base for Sylvie crown ? thanks

[@RichardThompsonCA]

I believe the problem is that the green plastic is too transparent and needs to be more translucent. Not sure what the solution would be to that though. You could sand blast the inside of it but I suspect that won't be enough (based on past personal experiences). You could try a misting spray coat of the paint on the inside, in the same color green (something with some white in it, to increase opacity and dispersion).

[@sethroca-martin2818]

There is something called a LED defuser on amazon that make the light spread out throughout the strip

[@itsurso]

Awesome build and vídeo, thank you. May I ask, what software do you use to 3d model? Thank you and congratulations.

[@iwasJay]

how did you diffuse the light then ?

[@rogerriveroll6324]

Amazing job as usual! What kind of ender 3d printer do you use?

[@williamd1732]

Another amazing Prop. The stand you designed compliments the center piece perfectly! You do amazing work and i would love to have some (all!) Of your props in my movie prop collection in my theater room. Are you for hire by chance?

[@moimeme8827]

a great build ! did you try to diffuse light with translucent paper ? on sanding the inside of the gem ? or add a shape made in white PLA (only 2 layers) ?

[@SmokAnalog]

Great job man, that stand looks stunning. You could sell that 3d file, I'm sure you'd earn some extra bucks for next builds :D

[@PropsNstuff]

Thank you for that! I really appreciate it😁 And maybe someday, but for now I am satisfied with sharing what I can. But it’s super motivating to hear that someone might bye them😎🦾 Have a great summer, cheers

[@Minzmarshmallow]

I just purchased the crown model and downloaded your display model :D it's now printing, crown on my Elegoo Saturn and the Display (except the Emerald-Part) on my CR10s :D I share my finished prop when I am done. How did you orient the Emerald-Part on your Resind-3D-printer?

[@AndreaLopez-fb4ll]

how did your print turn out!

[@Minzmarshmallow]

@@AndreaLopez-fb4ll it turned out pretty good :D

[@barakrl]

Your paint work is amazing, you don’t even need the light gem, just drop it and it will still be perfect without it.

[@Fedemat91]

Incredible, how long did it take you?

[@VesonoYT]

lovely build! the music at the beginning of the video is quite loud though!

[@ay04kay]

Would love to see a halo pistol!!

[@djjokerjaxx]

A delorean would be nice

[@did3d523]

more realistic gold metal than in the show disney

[@ragetist]

I have to say I've always hated the plasticky, overly clean look of Loki's crown in movies and the way you added texture to it looks fantastic. And about the emerald, while I'm not any kind of expert on this stuff and only watch these for the craftmanship, I *think* you might find the right type of diffusing plastic by salvaging some from an old tv/monitor since they have that type of material to diffuse the backlight 🤔

[@PropsNstuff]

Thank you so much for saying that Sir😁 That’s a big compliment for sure👌🏼 I have an old CRT tv out in the garage. So I will look into that🧐🧐 Have an excellent summer, cheers

[@ragetist]

@@PropsNstuff CRT is a bit too old, I should've been more precise and said I mean LED tv/monitor 😄 If you want check this video from DIYPerks, it has a great example of the screen material kzbin.info/www/bejne/bnvVontopLSHgZY Have a great summer as well, Sir! 🧐

[@eln77]

What if you sprayed the inside portion of the gem with a matte clear coat in addition to the filling material?

[@did3d523]

paint inside of Green cristal in White mat 1 layer add with cotoon

[@subseeker]

The fucking audio