LOKLiK Crafter: Firmware Update Guide

Рет қаралды 1,918

Күн бұрын

Пікірлер: 36

@redhada 3 ай бұрын

Lol. I´m strugling right now but you made me laugh, not working from v7 to v10, not even with the flush tool they published. They already need a lot of software improvement. BTW I was one hand whatsapping a friends screeshots of the proccess so i could cry/laugh not alone. Luckily, you only need that hand for a click, but as the progress bar doesn´t move at all, I was afraid to need to go to the bathtroom any moment, as i ´m home alone LOOL

@craftwithfelicia 2 ай бұрын

LOL - glad we made you laugh. 😂

@Ser-is4hc 2 ай бұрын

if you are looking through the comments because your machine will no longer turn on and are in panic mode this is the comment you are looking for (just spent the last 30 mins franticaly looking for a solution) keep holding the on button and go back on to the firmware update section on your settings. keep holding it down and it will show your machine under the bluetooth connection section.Go through the update and NEVER! let go off the on button. The key is just to Keep holding the on button right until you see the 'update successful' message. Hope this helps :)

@craftwithfelicia 2 ай бұрын

Glad it worked for you that way and I hope this helps others. Thanks for chiming in. 🙂

@wendymasters367 8 ай бұрын

THANK YOU!!! Worked perfectly for me. I didn’t realize you needed to hold the button the entire time. Awkward.

@craftwithfelicia 8 ай бұрын

Worked for us too.

@christina3482 2 ай бұрын

Mine won't turn back When I was trying to do the Firmware update How do I fix it

@stellasuppa 9 күн бұрын

@@christina3482sounds like you have bricked the device. It's the daftest way to the flash firmware I have ever come across. My machine power cycles holding the power button down so I'm not even risking updating firmware.

@maritescabrito3734 5 ай бұрын

i have done it a thousand times but it doesn't work

@craftwithfelicia 5 ай бұрын

Reach out to their support- support@loklik.com

@pamwhelan7737 4 ай бұрын

Wished I had have looked at this first instead of wasting sooo much time. Now I have to figure out how to get the machine calibration to work, does not want to play at all

@craftwithfelicia 4 ай бұрын

There’s a big software update coming in June. It may help - we shall see.

@redhada 3 ай бұрын

@@craftwithfelicia in the future now, doesn´t work, not even with the 2.0 in july

@marsbars8551 5 ай бұрын

When using the mobile app it won't let me input my password. Can you lead me on the direction to get help. It says it's sending me a reset link but it hasn't

@craftwithfelicia 5 ай бұрын

I haven’t used the app on my phone so I’m not sure what’s up. Contact support at support@loklik.com. Hopefully they can assist.

@marsbars8551 5 ай бұрын

@@craftwithfelicia thank you so much

@markverde11 8 ай бұрын

Having problem updating my firmware I'm using V1.9.7 I try to update to firmware version 9 when I press update the machine shutdown

@craftwithfelicia 8 ай бұрын

Found this on LOKLiK's website - www.loklik.com/app-help/detail?id=1733057150916112385&fbclid=IwAR0ZKiO8l7RtXliTOhwyT2qT5oK9ie8Lsq3uNPj7A0tmGubpuiIN2I1VhMg If that doesn't work, try contacting support@loklik.com.

@scottswanson1175 7 ай бұрын

Firmware won't update no matter how many times I do it & I never let go if the pwr button....HELP

@craftwithfelicia 7 ай бұрын

This is in LOKLiKs website - www.loklik.com/app-help/detail?id=1733057150916112385&fbclid=IwAR2yC3buHEkBwwVd1Z_Dj-RnoIOEL8-CCXHaqRTdX-WVCL0IfLhqnW9I-IU_aem_AVpyOC0h8rV7QaykRnOHrbYpvYj4QGdeo5uGYQd729Dj0X_HX58E7i09FMNKNh2Bad8. If that doesn’t help, you may want to contact them at support@loklik.com.

@LidiaVasquez-yb5kt 6 ай бұрын

Thank you because I was fricking out because my machine didn’t turn on for a minute. It is very important to keep holding and push the update button and hold until it’s done 😅

@craftwithfelicia 6 ай бұрын

Glad it helped!

@se-servis1274 7 ай бұрын

Hi this is my second loklik machine (I returned the first one because it was faulty) and I tried to do a firmware update and now the machine won't turn on anymore? How can I restart the loklik machine? thank you...

@craftwithfelicia 7 ай бұрын

Not sure if this helps but it’s on LOKLiKs website - www.loklik.com/app-help/detail?id=1733057150916112385&fbclid=IwAR2UZMjRHL_4ChUUhvvXs9ntxz83JmbKgQe5-voVbB3neA-bjIp62Y6Dlrc_aem_AW7paHoO9u5oJim7c3TCmd9xQy-E94z5PtQjoNipq7XTCveYvFKqrQA-nNw7lkIiY6E

@Ser-is4hc 2 ай бұрын

Hi, I'm struggling with this right now, did you figure out the work around?

@andreaescalona6091 8 ай бұрын

Hi. I ordered this and machine is not updating the firmware as it should. I am using a macbook air and downloaded idea studio macos apple chip. Idea Studio is now on v1.9.5 and firmware is on version 6. When i connected and chose my machine, I was able to choose the latest version (ver 9). The download button did not change to next like in your video. So I pressed download. And it is taking forever to download. Not sure what to do. No update button yet since it has not downloaded anything yet. Pls help.

@craftwithfelicia 8 ай бұрын

I tried updating the software on my laptop but it just kept spinning. I updated the software on my Mac with no issues. I didn’t get to the firmware part yet - other things came up. For firmware issues, I found this on LOKLiKs website - www.loklik.com/app-help/detail?id=1733057150916112385&fbclid=IwAR2UZMjRHL_4ChUUhvvXs9ntxz83JmbKgQe5-voVbB3neA-bjIp62Y6Dlrc_aem_AW7paHoO9u5oJim7c3TCmd9xQy-E94z5PtQjoNipq7XTCveYvFKqrQA-nNw7lkIiY6E. Maybe it will help. Otherwise, I’d say contact support.

@michaelzock8332 8 ай бұрын

That flush tool says it only works with Microsoft Windows and macOS isn’t supported

@applelover53 8 ай бұрын

@andreaescolana60 i think the firmware for 0009 says you have to have v1.9.7 software, so maybe try updating your software first