The Best DAW Controller For You? Icon DAW Control Surface Comparison

[@ChrisTopheRaz]

I wasted over 30 minutes on videos, trying to figure out whether the G2 or the X were flagship until your video. People are just not on board with what their viewers are actually looking for. Thank you for that.

[@LonelyRocker]

Happy to help!

[@mitchellquinland9439]

I just had to returned five units with the two main units of the ICon QCon Pro X crashing continually. Found it takes too much time out of a working day fixing problems. Therefore, phase it in slowly & make sure you’ve got a back up system so you can continue with your work flow. It’s nice when it works good, but I found it too temperamental and couldn’t take it. Support was also an issue from many warehouse outlets & even more so from ICon QCon being slim on the ground. So do your research to make sure it does what you expect it too and that your not left to get on with it because of its unfamiliarity in the industry tech world. At least this has been my experience in the UK.

[@LonelyRocker]

Sorry your experience hasn’t been positive. I did another video about DAW controllers where I said you have to manage your expectations with devices like this. We all have different expectations. But the one main point I made is to NOT expect these devices to do everything. They can’t. They are a great accessory but certainly not a master controller for every function. It’s important to understand that before buying one. Which is why I made that other video.

[@CreativeSauce]

Looking great man! What an awesome fresh start :)

[@LonelyRocker]

Thanks mate!! Appreciate your support and encouragement!!

[@monkeybarrelmedia]

This was the best review of these faders. Helped us make a choice on the Pro G2 with extenders!

[@LonelyRocker]

Sweet! Enjoy it!! Thanks for your thoughts!!

[@iglasner]

Slick new intro! There is definitely some badass musical sorcery going on behind those frosted glass doors! 😂🤘

[@LonelyRocker]

Haha! Thank you :)))))

[@guydematas9447]

The lonely rocker has done it again. Thanks for putting together these great videos. They really help me with my own home studio. Keep them coming.

[@LonelyRocker]

Post pics of your studio! Would love to see it 😂😂

[@NigelDThompson]

Looking and sounding great. Love a short vid on how you got that Geddy Lee bass tone you have in your awesome intro music.

[@LonelyRocker]

Thanks so much! Ha! That bass riff literally came out of me the night before I posted the video so I had to throw it in there. I was thi king I should tackle bass tone....perhaps we'll see that here soon!!!

[@Rickytee2]

New intro nice!! Studio looks fantastic Love icon gear they really have got it locked down in the controller sector, something there for everyone. Have the G2;s Pro x's next.

[@LonelyRocker]

Thanks as always my friend. And that Icon gear looks sweet in your studio as well!

[@DVTOM]

It's about time someone did this! Thank you!

[@LonelyRocker]

My pleasure!!

[@bealezebub513]

Whoa, weird. I was just going through your older videos that were about DAW controllers yesterday. Good timing!

[@LonelyRocker]

Must be something in the air! :)

[@bealezebub513]

@@LonelyRocker synchronicities!

[@LonelyRocker]

@@bealezebub513 I think so! ;)

[@keysbythenumbers]

Great video, worth the sub. Oh and the intro was pretty cool too!

[@LonelyRocker]

Thanks so much! Really appreciate it! And glad to have you here!! Look forward to hearing from you again...

[@flowa44]

That intro is tight.........thanks for sharing

[@LonelyRocker]

Thank you! Glad you enjoyed this....

[@citytonightproductions]

Great intro bud, always a treat to watch your vids! You’re finally getting around to the icon pro x review! Been waiting months! Love mine, so much to use hands and ears without my eyes watching waveforms! Would love to see some tutorials on set up, and use as the Icon webpage is ridiculously bad for info. Especially updating the software, and using extenders in different configurations. Took me a while to get the system to work with an extender on each side of the controller.

[@LonelyRocker]

Thanks so much! I know it was overdue. I know Icon is really trying to step up the game on the support content. It's a tough topic for me to do because there are so many different DAWs to cover and I just use one. But I know they are working on getting better at that by tapping more creators so hopefully that will get better soon. Cheers!

[@citytonightproductions]

@@LonelyRocker right on, you’re doing a great job and I always appreciate your vids! Your new studio looks great too, nicely put together! It’s Nice to have a ph environment reset once in a while and change it up, seems to kick up the creativity a notch I find. Cheers

[@LonelyRocker]

@@citytonightproductions Always appreciate your thoughts my friend :)

[@danielstartek1497]

iCON Platform M+ best piece of kit I ever bought!

[@LonelyRocker]

Sweeet!

[@TANAKAKINGYO]

Hi, this is best review for iCon's surface! I am a staff at a distributor in Japan. If there is Japanese subtitles, Japanese customers are very happy. If we prepare JP text, can you make embedded subtitles?

[@LonelyRocker]

Hi there! Glad you enjoyed it! Sure! I would be happy to do that for you. Go to the about me section here on my channel and send me a direct email. I will add it as soon as you send. Happy to communicate with my friends from Japan!

[@TANAKAKINGYO]

@@LonelyRocker Many thanks! I will do it.

[@russellloving3242]

LOVE your videos man. Question for you... What desk are you using in your new setup? And what size monitor screen and how is it attached? I have a G2 rig at my own studio, but we are setting up a studio at my church. We wanna go to a Pro X setup and im searching for a desk, Keep up the great work

[@LonelyRocker]

Thanks so much!!! Really appreciate that. Believe it or not but my desk is a combination of different pieces from Ikea. I got the widest tabletop they had. Theres a 4 cube shelf behind the desk with a little pedestal I found on Amazon that the monitor sits on. And the second monitor is a monitor arm that affixes to the desk. And my little rolly rack is also Ikea. It's 19 inches inside so I bought some rack rails, mounted them inside and boom...instant rack. I'm pleased how it turned out...I'm thinking of doing a tour video and I could detail some of this stuff...

[@russellloving3242]

@@LonelyRocker very awesome and ingenuities, i will definitely look into some of those ideas. Thanks so much. If you do make a vid along those lines i will be watching. I recently subscribed, We make different kinds of music, but thats why i like your channel. its informative to all types of musicians and engineers

[@LonelyRocker]

@@russellloving3242 Awesome. So kind of you. Really glad you hopped aboard! Looking forward to hearing from you in the comments!

[@everennui1]

damn. 6 feet of desk space. i thought I went overboard when I made mine 70". I was really hoping for a comparison between some of the other brands, but I'm sure the pricing doesn't make that easy to do. Thanks for the demonstrations and thoughts!

[@LonelyRocker]

Thank you! I would absolutely consider cross brand comparisons but I need the gear. I've reached out to other companies...we'll see what happens going forward....

[@icontentacademy]

Excellent overview.

[@LonelyRocker]

Thanks! Glad you enjoyed it!

[@soyaleeland2935]

I have a different question ;) - awsome screen saver, where can i get it?

[@LonelyRocker]

Haha...that's actually been asked before. I made it myself. It was a video background for a video segment I used to do...it's a video loop and not a screensaver ;)

[@soyaleeland2935]

@@LonelyRocker nice

[@allenbaker_music]

Love the Rush bobbleheads!

[@LonelyRocker]

A must for the studio!!! :)

[@MetalTalk666]

Thank you!!! I could decide. G2 for me.

[@LonelyRocker]

My pleasure! Enjoy it!!

[@MetalTalk666]

@@LonelyRocker I definitely will! I'm very excited.

[@rjkuser]

Love the new opening! Great job!

[@LonelyRocker]

Thanks so much! It was time for a refresher...

[@felipousismix]

Good video Dan, but double-check your mix, too much volume difference between some segments.

[@LonelyRocker]

Thank you...and man. People are watching me like a hawk now ;) I fight the perfectionist side so I can get out videos in a timely matter but then I always miss something...I can't win! 😂😂

[@eljodioerrante]

I see that the video is from a year ago, but I'm trying to grow my home studio with a controller. I was wondering if the Nano has expansion possibilities? Thank you.

[@LonelyRocker]

Yes. The expansion is actually served by the DAW and not the controllers. You can connect as many as allowed by your system. The order of them is setup through your DAW. In essence controllers are just midi devices.

[@Dave-Rough-Diamond-Dunn]

Great intro, and a nice fresh look!

[@LonelyRocker]

Thanks so much!

[@MasterOneMusic]

Awesome as always man! Thanks so much. Quick question, can you connect the Platform X (just extender) with platform nano, without a platform M? Thanks man

[@LonelyRocker]

Thank you so much!! That's been asked before. If you are adept with midi and can custom map it, in theory it should work. For optimal use, the main units have all of the function keys and the transport controls. It's worth an experiment....

[@MasterOneMusic]

@@LonelyRocker will do and let you know results Thanks man

[@Drewundonear]

Not anything im interested in but great video! Ill stick tot to the faders on my keyboard as I send off my tracks to get mixed...

[@LonelyRocker]

They're not for everyone but thanks for your thoughts!

[@nbg1120]

So, is it posible to just buy the platform nano, and then later down the línea, get the platform extender? Or do I have to buy the platform main unit too? Great vídeo by the way!

[@LonelyRocker]

Thank you! The Nano can operate on it's own. I did a dedicated video on that one. You can find it on my channel.

[@everennui1]

I was just checking out your DAW control surface videos yesterday. What divine providence?

[@LonelyRocker]

A couple of people said that...my timing is good today I guess :)))

[@moreausylvain]

Good vid. To bad you didn't show a fader moving with the direct sound. That's my #1 main concern for any controller :p I use Xtouch.. it's terrible, loud fader sound and step "clicliclic" rather than smooth silent moves. Want to upgrade but yeah.. to bad nobody does sound comparaison.

[@LonelyRocker]

Thanks for your feedback. I've actually done a bunch of DAW Controller videos. I'm certain I covered this aspect in at least one of them.

[@stevesrecordingtips7247]

New intro looks amazing!

[@LonelyRocker]

Thank you! ;)

[@ToneyLoco]

Hi, Great video, this is the first video I’ve seen that shows the icon nano connected to the platform extensions. I was wondering is this possible. Because I have the nano, and was thinking about expanding with the icon platform X+. The reason I asked is because I reached out to Icon pro audio support awhile ago and the said that the Nano is not compatible with extensions. But clearly in you video it appears to be. How can I make this setup work?

[@LonelyRocker]

Thanks! Controllers are connected via a protocol and assigned and arranged within the DAW. So once the DAW sees them it’s able to arrange them in a sequential order. I can’t speak for every DAW as I use Logic. But in Logic I just keep installing new controllers and then arranging them in my desired order. Hope that helps!

[@ToneyLoco]

I appreciate your reply and your insight on this matter. I use FL Studio, and I’m not sure how it will work,No videos on KZbin showing how. But I’m excited and curious to try it myself. Maybe I’ll post it…Thanks again for your input!!!

[@LonelyRocker]

My pleasure! And good luck with that. I don’t know FL Studio so can’t really help there but do,let me know. BTW Icon has some new products coming out soon. Might be worth waiting to see what they have to offer.

[@ToneyLoco]

@@LonelyRocker thanks… I will probably wait to see what’s new with Icon.

[@STxFisherman]

Thanks for the great info.

[@LonelyRocker]

My pleasure!

[@JerridFoiles]

I'd like to offer some constructive criticism. I have now watched a couple of your videos and while I do find them informative and helpful, they are also a bit awkward and seem to lack consistency/continuity. I would spend a little more time in pre-production writing out your script and making sure it flows a little tighter. You can also achieve this in post production with some clever editing. But as I said before, your videos are informative and helpful, so thanks for making them. I also have a question: Are there any DAW controllers compatible with GarageBand on Mac?

[@LonelyRocker]

Thanks for your thoughts. I'm always looking to get better so good constructive feedback helps. I wear all of the hats here so sometimes the stress shows in my delivery but I'm always trying to get better at that. As for Garageband I'm not sure. Does it have the Mackie protocol built in. That would be a dead giveaway. It's not so much the controller supporting the DAW, it's the other way round....

[@JerridFoiles]

@@LonelyRocker It would be closer to Logic, but I don't know if it has any protocols specifically.

[@LonelyRocker]

@@JerridFoiles I don't use Garageband but DAWs need the control protocols for external devices to work. Shouldn't be too hard to figure that out...

[@_emanmodnar]

I’ve heard somewhere on some other review that DAW-controllers doesn’t work with GarageBand, because GarageBand doesn’t allow MIDI to flow bi-directional (only in, not out). So controllers would not be able to read settings.

[@Illkacirma]

thnx for chkng all these things out!

[@LonelyRocker]

My pleasure!!

[@uptownphotography]

Do the jog/shuttle wheels do very fine movements on these units? I have Studio One and it is very hard to navigate if I just want to move the play head a few seconds using a mouse. So i am looking for a controller which moves the play head with the jog wheel in very fine movements similar to what i did when doing video editing where I could move 1 frame at a time. Thanks in advance and nice video as always... Phil NYC / Jersey Shore Area

[@LonelyRocker]

Thanks so much. The best I can say is they are not surgically accurate. You can fly around and get into the weeds but you're still better off with the mouse and keyboard for super precision. I think a jog shuttle has its limitations in my opinion....

[@uptownphotography]

@@LonelyRocker Thanks for the info. Helpful and appreciated. All the best. Phil...

[@LonelyRocker]

My pleasure! Cheers!!

[@philhartley777]

Have you found any digital interface mixers that are good as daw controller's? Example: Midas M32r, Tascam Sonicvision, Yamaha TF1 etc. Thanks 👍👍👍

[@LonelyRocker]

Presonus makes some great controllers with built in interfaces. My preference is to have separate devices in case you need to update either device you can do separately. But those Presonus mixers are kick ass...

[@philhartley777]

@@LonelyRocker Thanks. Good idea. You've helped so much in my quest for a control surface. Great videos 👍

[@LonelyRocker]

@@philhartley777 My pleasure! So glad I could help 😎🎸🤘🏽

[@timmyblack8588]

very very nice video. did icon sponsor this video for you?

[@LonelyRocker]

Thank you. Icon has provided access to the equipment so I can review them but they DID NOT pay me to do this video. And I Absolutely use their gear daily in my studio.

[@andrewillingworth]

was wondering if you can use a DAW Controller with the likes of the Behringer X32 RACK Digital Mixing Console?

[@LonelyRocker]

I'd guess not as it's designed to work with a DAW utilizing a protocol like Mackie or HUI. Unless that unit has those protocols. I've never used one.

[@simon_patterson]

Is there any competition in the market to Icon?

[@LonelyRocker]

Icon seems to have the widest range but Mackie, Presonus Behringer SSL all have controllers

[@simon_patterson]

@@LonelyRocker thank you!

[@jdssurf]

i've got Ableton, getting a Push, need a midi keyboard that's bigger than my little keystep. So since most keyboard faders suck and don't have mute and solo, i'm looking for separate units for faders, the console 1 looks great for me but 600 bucks. Think one of this would be a solid choice or should I spend more, making mostly music like Underworld old trance and such, maybe some Enigma like stuff.

[@LonelyRocker]

Again...budget. Only you can determine that. Console 1 is a good product. as are the units I featured here. You need to try them out and see which one you like best....

[@jdssurf]

@@LonelyRocker gotcha, sry if i posted same question on dif vids of yours

[@FacuPuig]

So... you can use the Nano and Platform M+ together? lets say I have the money for the nano but then I want to expand 8 more Chanels is that possible? Thank you

[@LonelyRocker]

Absolutely!

[@ZillaYT]

I'm going for the Icon QCon Pro G2.

[@LonelyRocker]

Nice!

[@MrBuckshot18]

Im going to downgrade to the Platform M+. I had the G2 but noticed I used my keyboard a lot more than most the buttons on the G2. The faders, Jog wheel, mute and transport is all I really used

[@LonelyRocker]

Honestly, I wouldn't call it a downgrade. It's smaller, sleeker unit but same quality. Not a bad idea if you know what you need...

[@MrBuckshot18]

@@LonelyRocker loosing some features. I feel they should lower the cost of the M+ about 100.

[@TheStudioDrummer]

Very helpful. Thanks dude.

[@LonelyRocker]

My pleasure!

[@ryanreeves8931]

Can you customize the function of any of the buttons w keyboard shortcuts? (ex. Dupe tracks w/o content, snap. etc). I know the SSL can do it. If the Icon Pro product can as well, The Qcon is 1/2 the price with what seems like the same functionality if this is the case.

[@LonelyRocker]

The best way to answer that is to point out that this is a midi controller. So if that keyboard shortcut triggers a midi event, then yes. That midi even can be mapped to the controller. The brand doesn't matter really. they all conform to the same protocols (Mackie, Hui, Logic). The available functions are decided by the protocols and not the controllers. That's important to understand. So sSL doesn't get any more access than any other controller. Watch this video where I discuss controller expectations: kzbin.info/www/bejne/a5_CkoOpd5Z4aqc&t

[@gxlbiscuit]

It looks like some of the motors are slower than the others. Is that normal?? Is that ok?

[@LonelyRocker]

Totally fine. You wouldn't keep them in DEMO mode as I have for this video. There is a calibration mode where you can adjust the speed of the faders.

[@gxlbiscuit]

@@LonelyRocker Thank you for the info :-)

[@derkhedemann5606]

I now have a Behringer X-Touch DAW Controller, it works well, but it is unclear, so it has no meter bridge and the faders have no segment metering, so you really have to look closely at what you are doing because you quickly send in too much. and the Behringer x-touch dont work on any DAW software. that is why I am now looking into the Icon DAW Controllers, as I have heard many good stories about the DAW Controllers from Icon. the Behringer X-Touch is good for beginners, but as a professional producer you quickly reach the limits.

[@revelationsoundstudio]

I wished you compared it to the Mackie Controller and Expanders

[@LonelyRocker]

This comparison was highly recommended but I would be very interested to compare other controllers if I could get them...

[@christianrholt]

Hey, would you say there's a noticeable speed/reaction time difference between the G2 and the X (with the quicker USB connection) ?

[@LonelyRocker]

Honestly? I haven't really noticed. The faders react so quickly. I don't think the connection makes any difference as the data is likely well within the bandwidth of USB 2.

[@christianrholt]

@@LonelyRocker Thank you! Really appreciate it!

[@christianrholt]

@@LonelyRocker I greatly appreciate your help, videos, and timely response. My last question is have you used a Mackie MCU Pro, if so, how does the G2 or X compare overall?

[@LonelyRocker]

@@christianrholt My pleasure. I haven't used the MAckie but from what I hear it's overpriced...I tried to get one to test in the studio and where I am there are supply shortages...so not much to say about it I'm afraid. But a mate of mine sold his and got an Icon and is happy....

[@EthanSetiawan]

Could you elaborate on using the platform nano with the x+ (or m+)? Does that work with full functionality?

[@LonelyRocker]

You can simply set them up together. One as the main controller and one as an extender. It's quite straight forward...depends on your DAW but should connect without issue...

[@EthanSetiawan]

@@LonelyRocker without physically connecting them? I see there's no port on the back of the Nano to go to the X+ or M+. Then you have to set something up inside your DAW or the included iCon software...?

[@_emanmodnar]

Icon states on their webpage that the Nano might start at ch1 (taking up ch1-8), and Platform M+ would then begin at ch9… Is this customisable in Logic Pro?

[@timmyblack8588]

Does the QCon ProX Have just as good DAW control and Integration with Protools as Avid's DAW controllers like Avid's S1 & S3 control surfaces? or would you say Avid control surfaces is better in term of Protools DAW control and integration?

[@LonelyRocker]

I think it’s safe to say any controller designed for a specific DAW will have deeper integration. Avid and ProTools. Presonus and Studio One. That being said it comes down to the features you need. The Avid controllers are WAY more expensive. You pay for that integration. The Icon controllers have built in HUI so they will work well for most mixing features, perhaps minus deeper integrations. Hope that helps.

[@timmyblack8588]

@@LonelyRocker very very helpful! thanks you for your quick response.

[@LonelyRocker]

@@timmyblack8588 My pleasure!

[@djsilent01]

I have the OG Qcon Pro. If I go to the Nano or the M+, do you feel that will be downgrading for me? Im still unsure.

[@LonelyRocker]

No, I wouldn't call it a downgrade. It's all about what you need. If you don't use all of the features and you'd rather have more space on the desk then it's an upgrade not a downgrade...

[@sandrakaminsky7107]

Love the new intro!

[@LonelyRocker]

Thank you :)))

[@_emanmodnar]

I’m considering buying the platform-size due to the size. However the M+ does not have the functions I need. What are your experience with combining Platform M+ (or X+) together with the Nano Air on Logic Pro? Icon just gives a disclaimer, telling that only some or no functions will work……

[@LonelyRocker]

I’ve tested all the ones you see in the video. As they are all midi controllers they should all work. But there are so many specific functions it’s hard to say if it will work for you. I mainly use them for mixing and panning. Other functions I just grab the mouse. So really hard for me to advise you from here.

[@Eddywars]

Does the g2 memorize plugin mapping or do you have to midi learn everytime you open the plugin? Thank you.

[@LonelyRocker]

It’s not specific to the G2. All controllers use a protocol that are DAW specific. There are too many plugins on the market for any of these to be efficient with plugins. They are mapped. But any changes you make will be universal to all plugins. I think. I’ve never tried it.

[@krishermstad]

I've gotten a lot of mileage out of the platform M+ with just 8 channels. I think if I "upgraded" though I'd want to a move to a more advanced version.

[@LonelyRocker]

This was my first hands on with it...it's really a great controller. Very refined and streamlined...

[@kaislate]

Can you use the expansion modules without having the base unit?

[@LonelyRocker]

Technically yes but you will have no function control. I really don't see any benefit in doing that unless perhaps you custom map it. But I can't guarantee positive results..

[@kaislate]

@@LonelyRocker thanks for replying. Yeah I was wondering if there was any way of possibly just using them as a midi controller. There are really no other motorized fader control 🎛️ that is as good as these and if there are midi profiles for different DAWs and such. S far as I know these aren't doing any processing or anything on the unit anyway so they are control surfaces only regardless. From a business perspective the companies obviously want you to buy the expensive base and add expansions, but if you only need 8 faders and a couple buttons per track it would be nice to be able just to buy an expansion unit.

[@LonelyRocker]

My pleasure. It’s worth trying. In your case this is just a midi controller and can be mapped with their mapping software. It would be worth a test.

[@djinox9423]

Hy I would like to know can we use icon plateforme x+ as an extension of qcon pro G2 ?

[@LonelyRocker]

I have a QCon Pro X and G2 with extenders all working together so I don't see why that wouldn't work....

[@AudioJanitor]

Can this control MIDI like a VSTi synth? (CC expression etc)🎸

[@LonelyRocker]

Technically yes if you know how to map it. It is a midi controller in a mixer form factor with built in mixing workflow templates.

[@LonelyRocker]

Technically yes if you know how to map it. It is a midi controller in a mixer form factor with built in mixing workflow templates.

[@LonelyRocker]

Technically yes if you know how to map it. It is a midi controller in a mixer form factor with built in mixing workflow templates.

[@kzac3000]

Q/ Can I control my subs in Cakewalk with the G2 ?

[@LonelyRocker]

I’ve never used Cakewalk but the controller sees all subs and tracks as the same thing. Subs are just additional tracks in sequence. So technically yes, it not dedicated to subs.

[@rocvox]

Do you know of a controller that will work with Magix Sound Forge Pro 15? (or 12)

[@LonelyRocker]

Unfortunately I can't answer that question as I've never used that DAW. The DAW needs to support control protocols like Mackie or HUI. If it does, then it's likely any controller that uses these protocols will work.

[@rocvox]

@@LonelyRocker Yeah. it doesn't. Thanks, though. Great videos, very helpful.

[@LonelyRocker]

Thank you. Sorry I didn't have a better answer but I try to provide the best info I can :)

[@Arsonloke]

Great video thanks

[@LonelyRocker]

Glad you enjoyed it! Thank you!

[@mauriciotejada7960]

Nice bro thanks

[@LonelyRocker]

My pleasure!

[@longline]

So, for expansion, is qcon pro compatible with platform x+?

[@LonelyRocker]

They don’t have to be compatible with each other. Compatibility is determined by the DAW. I have blended product lines with good results. As long as you know how to configure them.

[@highland1997]

Had a Qcon Pro G2 running with Pro Tools unfortunately it kept crashing on a regular basis at least once a day if not two or three times a day, got to the point that I stopped using it. Firmware was all updated, computer was all updated, tried a number of different cables. Also found the jog wheel noisy, very disappointed with the whole experience of owning a Qcon, tried getting an answer from support but nothing, sorry

[@LonelyRocker]

Sorry you had a bad experience. Most of the feedback I get on Icon is positive. Sorry that wasn’t the case for you.

[@simontassano5992]

A question: The display on the Qcon G2 extender looks out of alignment with the faders??? Is this for real?

[@LonelyRocker]

Out of alignment??? How so?

[@simontassano5992]

@@LonelyRocker If you look at the graphic of the extender that you use, (the same as is on Icon’s website I believe), the backlight does not appear to be aligned with the faders. (Too far to the left and part of it missing on the right. I’ve searched deeper and have come to the conclusion that it is just a badly made graphic and yes, the backlight screen does align. Take another look and see if you agree.

[@LonelyRocker]

@@simontassano5992 The backlight is for the display and has no relationship with the faders. It's aligned to balance with the main unit. All looks great here on the desk. Have to say, this observation is a first ;)

[@simontassano5992]

@@LonelyRocker maybe you could nudge Icon to fix the graphic - I think it would be critical for anyone considering purchasing one of these units (myself for instance…;-). I’m guessing it’s just a cut and paste mistake from their art dept. It’s tough to photograph a piece with a backlight and have it look right. I’m convinced they dropped an image of the backlight onto the extender, but did not do it correctly. However - small potatoes..;-) keep up the great work and enjoy your new “cave”. Pax, Simon

[@davidlivingston7014]

Hi does g2 pro works with M1 mac?

[@LonelyRocker]

I'll have to look into that. But if your DAW is supported, it should be by association but don't quote me on that...

[@Iconproaudio]

Yes, all iCON controllers work with the M1 Mac.

[@davidlivingston7014]

@@Iconproaudio Purchased G2 2 days back loving it. Thanks for the reply

[@MustacheVerra]

Nice!

[@LonelyRocker]

Thanks!

[@eljodioerrante]

Thakyou very much

[@LonelyRocker]

My pleasure!

[@eljodioerrante]

@@LonelyRocker ¡Oh my god! My spelling is lousy.

[@LonelyRocker]

@@eljodioerrante 🤣🤣🤣🤣🤣🤣

[@eljodioerrante]

@@LonelyRocker I hope Icon rewards you as you deserve, because you have managed to convince me to enter the world of controller through your brand. Your work is appreciated. On the other hand, I am also a guitarist without a band... Merry Christmas and Happy New Year.

[@LonelyRocker]

Enjoy it!!! I think they appreciate me. Too bad I don't get a commission! ;) Best to you for the holidays!

[@_emanmodnar]

Music is too loud 😒 Thanks for the review though! 🙂

[@LonelyRocker]

Music is never too loud!!! 🤪🤪🤪🤪

[@_emanmodnar]

@@LonelyRocker 😂

[@petersvan7880]

IMO you get more value for the money with a Behringer X-touch(expander).

[@LonelyRocker]

If it works for you then you have the right device for you...

[@MrFelonyLoc]

how do i put the g2 in vegas mode?

[@LonelyRocker]

I've never used Vegas but the DAW would have to support HUI or Mackie to connect.

[@MrFelonyLoc]

@@LonelyRocker you missed my whole question or you dont know what vegas mode is

[@LonelyRocker]

Oh. Haha. I thought you meant Sony Vegas 😂😂😂. You mean all the flashing lights. Power down and hold down the record activate button for track 3 and power on. Try it also with track 5. Enjoy the show 🤘🏽🤘🏽🤘🏽🤘🏽

[@LonelyRocker]

✅✅✅✅ Is a DAW Controller right for YOUR Home Studio?? Pros and Cons-----> kzbin.info/www/bejne/e5jYgaZ_Z7uqgJI 🔥🔥🔥

[@justinjones6810]

lol icon should have hired you to do the product breakdown you did a better job then their own video 😂😂😂

[@LonelyRocker]

Haha...actually if you hunt through Icon's KZbin channel...you might just see me :))))

[@gnomik33]

But please make sure you don't buy it for Ableton as for example platform M+ has plenty of issues that are still present after 5 years+

[@LonelyRocker]

Thanks for sharing. I don’t use Ableton.

[@MrPearlmasters1]

So this video is about what ICON DAW is best for you, not which DAW controller is best.

[@LonelyRocker]

That’s exactly what it says in the title. I’ve had a ton of requests to do this video.

[@darkozoric4184]

Until they integrate plugin control from the controller....they are nothing but a glorified and expensive mouse. We are getting only partial control of the audio experience through these things. Not worth the expensive $ until plugins can be controlled on them

[@LonelyRocker]

I actually disagree. Plugins would have to conform to some standard UI for a universal DAW Controller to be able to control them. And that's not happening. Plugin control is a bonus. To me it's the mixing experience that makes these controllers useful. But we all have different expectations...and that's cool...

[@morbidmanmusic]

Great place. Get rid of the tacky mackie ads everywhere.

[@LonelyRocker]

Ha!! I wish I controlled what ads you see but sadly that is all youtube!!

[@DaRza17]

Shoulda spend that money on some decent monitors lol...

[@LonelyRocker]

I quite like my monitors...thank you ;)

[@MobiusMinded]

The “best” DAW Controller…. Three choices by the same company…. Ok

[@LonelyRocker]

I was asked by many to do an Icon gear comparison. I have reached out to other controller manufactures to see if they would like to be covered. Happy to do so if the gear is made available.

[@mdp303]

So this is just an advertisement for a product. Can’t really see the point of this. I could just go,to the website and look. I don’t know how it cost compares, how well,it works etc. What exactly is this channel for….what’s the point of it? If you want people to subscribe you should make it clear what you’re about.

[@LonelyRocker]

I was not paid for this. I received A TON of requests to do this video because Icon fans wanted to understand the differences between the different units. Sorry it didn’t work for you.

[@mrmooch2163]

4 min intro? no thanks

[@LonelyRocker]

Fingers hurt when you skip forward? That must be tough ;)

[@danielstartek9729]

Your name must be MacLeod because your opening is "Too Loud MacLeod"!

[@LonelyRocker]

I do all that work and that's what you got out of this???

[@TopblokeGolf]

Just some feedback, I found myself skipping your videos , you need to get to the point a bit quicker , i

[@LonelyRocker]

All feedback appreciated...thank you.

[@salintium]

yeah I just don't buy your advice. You seem more of a gear collector than a real producer/ Eng. All the work going into sound proofing your studio and those are the monitors you use.

[@LonelyRocker]

Clearly you don’t have a clue…but ok…

[@redviagra]

The SSL Uf8 and the UC1🔥🔥🔥🔥🔥🔥

[@LonelyRocker]

I'd like to check them out...