Hotpoint NSWE7469 1400 Spin 7Kg Washing Machine

Рет қаралды 5,534

Lords Electrical

Күн бұрын

Пікірлер: 34

@danielarmstrong2685 2 ай бұрын

Getting this unit this Friday .Thanks for the demo .

@leewatson6500 4 ай бұрын

I've got this exact model, had it a month now and find it does a really great job. I'm well happy with the machine.

@virginiaweir-hj1rt 27 күн бұрын

Got the NSWM model last Friday. Unfortunately, the deliverymen scarpered without showing me how to switch it on. Didn't know the button on the left-hand side was the on/off button. It says 20C underneath it!

@kazali6111 4 ай бұрын

Indesit and Hotpoint are together nowadays. Candy and Hoover are too I've recently learned. The good thing is you can get spares easily with these brands.

@Dpegg10 4 ай бұрын

Indesit and Hotpoint have been together since the 2000s same with candy and hoover

@Lxy-scary 2 ай бұрын

Mine still doesn't open even after doing it. Its frustrating @superdylan803

@paulbarbara Ай бұрын

This may seem a silly question, but do you put washing powder in two of the compartments, or just one? If one, which one? And what is the 'partition' that you move from one place to another? If you don't use liquid detergent, can you remove the 'partition'

@lords-electrical Ай бұрын

You only use the partition if you are using liquid. If you are using powder then it is the right section you use, or if you need a pre wash then use the middle section too.

@paulbarbara Ай бұрын

@@lords-electrical Thank you.

@alexthomson7465 18 күн бұрын

I've just ordered this but one thing I don't get with hotpoint is the unbelievably long programme times on their appliances. I have a hotpoint dishwasher and it's the same.. Either 2 1/2 - 3 hours or a just about acceptable 45 minute one but some things are still dirty. I might cancel the order and start looking again. I am limited with space though.

@MargaretMcCuaig-c6t 5 күн бұрын

Just want to know how to use 1400 spin cycle only

@musaratmushtaq383 Ай бұрын

Can you show a demo of putting the washing powder or liquid

@JulieHicks-y6j 3 ай бұрын

We have just had this model fitted, as a replacement due to our old Whirlpool giving up after 10 years. The problem we have had with it is the red lock sign not going out and allowing the door to open, after the wash has finished. Any suggestions on what we are doing wrong. Many thanks Julie

@lords-electrical 3 ай бұрын

This is where you have accidently enabled the child lock on the machine. If you press and hold the key lock symbol for 2 seconds it should get rid of the symbol and you should be able to carry on as normal

@washinglad1400 3 ай бұрын

I have had this model for just over a month now, it washes and rinses nicely but when spinning it’s been an absolute pain in the ass. I’ve found it’s really annoyingly sensitive when balancing for the spin to the point where it’ll just skip the spin and leave everything sodding wet whether you put an even or uneven load in it, also none of the programmes that are a decent length do the full spin speed. The timer is also really annoyingly inaccurate, it’ll happily add on 30 minutes for no reason and randomly end the cycle with it saying 20 minutes left. Now something quite bad that’s been happening with it, it’s chewed up a bra and two socks! Back in August/September when I was looking for a new washer, I boiled it down to this and one of the new Beko EnergySpin models. I chose this model and initially thought that I made the right choice but I’m starting to have my doubts now, especially if it keeps up with this socks/bras shredder mentality. But a few good things I will give it, It looks very nice, it’s feels sturdy and it’s anti-staining function works amazingly

@deputy899 Ай бұрын

Good video. I would like to know where the filter is. On my current machine it's at the back and I can't get to it. TIA

@lords-electrical Ай бұрын

The filter is at the front under a plastic trim so is quite easy to access

@deputy899 29 күн бұрын

@@lords-electrical Many thanks. I think I will be getting one.

@barryrichardson1789 17 күн бұрын

How do you know what weights per program?

@lords-electrical 17 күн бұрын

In the instructions it lists all of the weights per program that you should stick to

@54000biker 25 күн бұрын

Just got this model, running the pre wash now (no clothes in) the glass front is very hot, in fact too hot to touch, is this normal?

@lords-electrical 25 күн бұрын

If it is a normal washing temperature of around 40 degrees C then the door shouldn't be that warm. If it is at 90 degrees C then yes the door will get very warm to touch

@54000biker 24 күн бұрын

@@lords-electrical ok thanks

@MJLAMMING 4 ай бұрын

On my washing I use 40c and 60c all the time.. I never use eco cycles on my washing machine

@SnazzyCH1 4 ай бұрын

Hi, on the Eco 40-60 setting, how can it use less power if it's on for longer? Thanks.

@mels8966 3 ай бұрын

Most of the power is used to heat the wash water, the motor uses far less, so as eco uses a lot less water, it uses less electricity to heat it to 40°C which saves more electricity than the longer run time uses.

@alexthomson7465 4 сағат бұрын

The timer feature is great but rendered unusable on this machine as the sensitivity of an uneven load is just ridiculous. I set it to wash at night so when I get up I just hang it out but, you guessed it, stupid thing didn't spin so everything had been sitting for hours ringing wet so had to run a spin cycle twice. Great design hotpoint. NOT ! always adding time then randomly stopping too.