Losi Baja Rey gets Hobbywing and Reefs!

  Рет қаралды 9,105

Exocaged RC

Exocaged RC

Күн бұрын

Пікірлер: 48
@rossbyers1
@rossbyers1 Жыл бұрын
I love your passion and authenticity. Your level of instruction is so helpful for us newer to the hobby. Cheers.
@stevebuchanan5773
@stevebuchanan5773 Жыл бұрын
I would ditch the stock servo horn and link. Hopefully somebody will make a bellcrank up grade. Nice job
@CM-ig2pf
@CM-ig2pf Жыл бұрын
Seems everything is more expensive and made cheaper! 😢 you would think that these companies would watch more of your videos!👍👍😁😎✌️
@Jsmith9619
@Jsmith9619 Жыл бұрын
They don't care because everyone keeps mindlessly buying the stuff.
@ExocagedRC
@ExocagedRC Жыл бұрын
They do watch my videos…. All of them…
@creekcreeperrc7972
@creekcreeperrc7972 Жыл бұрын
​@@Jsmith9619that's it.
@FarmerFpv
@FarmerFpv Жыл бұрын
The Hammer Rey bell crank system fits on the Baha Rey 2.0. I have it on mine and it is smooth with no slop. Vivaton makes it too. I have the Exotek brand on mine from Amain Hobbies that cost 47 dollars. Come with ball bearings and an aluminum servo horn. So much better than stock. I also have the GPM version to try out.
@Markbinim-w8j
@Markbinim-w8j Жыл бұрын
So the exotek bellcrank makes a worthwhile improvement?. I fitted one of theirs to my lasernut and although it's really nice quality and obviously much stronger than stock it didn’t really make the steering much tighter.
@ExocagedRC
@ExocagedRC Жыл бұрын
That’s good to know.
@FarmerFpv
@FarmerFpv Жыл бұрын
@@Markbinim-w8j You have slop somewhere else or a cheap servo. Of course ball bearings and aluminum bellcrank and horn will remove slop and tighten the steering. that's a given no matter what brand you use over stock You have to have a good servo. 120+ dollar servo like a Reef, powerhobby, Savoc, EcoPower, Protek Rc any one of those or other good brands. The 45 dollar Amazon servos that everyone swears by have slop in the gears which defeats the purpose of having an aluminum bellcrank with bearings. Also if the bearings have any vertical play that needs to be shimmed or it will have slop.
@FarmerFpv
@FarmerFpv Жыл бұрын
@@ExocagedRC I know you're getting the Vivaton. Coming to a video soon, lol.
@laho1106
@laho1106 8 ай бұрын
Will hammer rey bell crank also work on baja rey? Not 2.0
@stevejackson3564
@stevejackson3564 Жыл бұрын
I like how the motor comes out. & the mods your doing.
@harlyquin
@harlyquin Жыл бұрын
and here i was thinking they updated the steering from the previous model
@ExocagedRC
@ExocagedRC Жыл бұрын
They did not.
@CRAZYBUILD349
@CRAZYBUILD349 Жыл бұрын
very nice work, i love to build and upgrade, thanks for all your hard work,
@jimk962
@jimk962 Жыл бұрын
Nice man very good info.
@rc-daily
@rc-daily Жыл бұрын
Really enjoyed the live stream
@darrinwoodward14
@darrinwoodward14 Жыл бұрын
I'm running the same motor esc combo in my blackout,and it's flat nasty! Had to go to all hardened diffs!! 😂😂
@scottbray5936
@scottbray5936 Жыл бұрын
I need that Vitavon bell crank
@ExocagedRC
@ExocagedRC Жыл бұрын
Me too buddy.
@JPRC_CRAZINESS
@JPRC_CRAZINESS Жыл бұрын
Just followed you on TikTok didn’t realize you were on there🤷🏻‍♂️🤣👊🏻💪🏻
@ExocagedRC
@ExocagedRC Жыл бұрын
Yeah buddy.
@toolbaggers
@toolbaggers Жыл бұрын
Adding thermal compound between the heatsink and anything that it's trying to cool is critical for good cooling (30 degrees reduction in PC CPU that gets thermal throttled to 212 degrees operating temp)
@NelaRc
@NelaRc Жыл бұрын
Clean rebuild sir looks like power house bell crank i think your doing next but im sure you will get it done
@ExocagedRC
@ExocagedRC Жыл бұрын
Yeah steering is next.
@RcPlayer-tt2vw
@RcPlayer-tt2vw Жыл бұрын
I want this truck but I like livery guy , always on back order
@RcPlayer-tt2vw
@RcPlayer-tt2vw Жыл бұрын
Drives me crazy the slop , it’s mostly these throwaway Servos , no reason can’t put 15$ metal gear ⚙️ in , I just bought all metal case 35kg , for 30 bucks , smooth strong 💪, I like protech and reefs too but I’m not going spend that much on each rc
@NeutronicalGaming
@NeutronicalGaming Жыл бұрын
I've been waiting for this, I wanna see how you set this one up.
@ExocagedRC
@ExocagedRC Жыл бұрын
Gotta get the steering stuff for it but the raw500 made a huge difference
@adam-izer6385
@adam-izer6385 Жыл бұрын
Love the wrenching videos. This might be a dumb question but does the sand on your track hurt certain parts like bearings etc ?
@ExocagedRC
@ExocagedRC Жыл бұрын
Thanks and yeah the sand gets into everything.
@Youworstnightmare77
@Youworstnightmare77 Жыл бұрын
After alot figure thinks..😂😂 is almost same case that old v1 baja rey . What you talking about. Just a fews upgrades like body roof light rack and the twin spare tires. 😂😂
@old-rcplane-phart
@old-rcplane-phart Жыл бұрын
Horror-izon just lost at least 50% of their rc plane & helicopter business yesterday. (In other words, a bunch of flying people are selling out & going back surface! Yep, me too!)
@ExocagedRC
@ExocagedRC Жыл бұрын
Really? Why would they do that?
@FarmerFpv
@FarmerFpv Жыл бұрын
Are you drunk? lol
@old-rcplane-phart
@old-rcplane-phart Жыл бұрын
👉👍😁
@Occuria1
@Occuria1 11 ай бұрын
I am convinced that stock steering in every rc terrible.
@mikellewis2346
@mikellewis2346 Жыл бұрын
I have a losi super baja rey v1 and the first time you work on them it's horrible to figure out what to take-off an what don't need to come off to work on it. And the steering design on the losi baja rey an rock reys big and small are crappie stock and not alot better upgraded. Main downside to the losi.
@olivierg.6292
@olivierg.6292 Жыл бұрын
Too bad that so many things had to be upgraded on the truck. That's why the hammer rey is my first losi truck but also the last one for sure. The original bell crank system is just so disappointing. The servo horn, the servo itself, the motor ....so many things. Please losi, start to sell roller directly because it's a waste of money.
@harlyquin
@harlyquin Жыл бұрын
yes, been saying the same for years now, most rtr rc cars are quantity over quality, need a roller option for sure
@ExocagedRC
@ExocagedRC Жыл бұрын
I like this truck more than the Hammer Rey. I will make this perform well.
@toolbaggers
@toolbaggers Жыл бұрын
It sucks that HH makes you buy their overpriced electronics which are sometimes just literal e-waste that should go straight to the bin. I fly RC planes which has an older demographic and HH is not allowed to pull that crap as much for planes (like not being forced to buy bundled garbage transmitters/batteries/chargers with every model unless it's a true beginners plane.)
@ExocagedRC
@ExocagedRC Жыл бұрын
I have a couple planes too and yeah it’s not like you can just stop and reset to go again. LoL.
@bsfunk44
@bsfunk44 Жыл бұрын
I wanted one of these trucks until I saw this video. That steering setup is terrible.
@ExocagedRC
@ExocagedRC Жыл бұрын
It'll be fixed soon
NEW Ultimate RC Desert Trucks! Losi Baja Rey 2.0 Raptor & Ford F-100
17:06
Baja Rey gets Vitavon Steering Yes!!
8:08
Exocaged RC
Рет қаралды 6 М.
小丑女COCO的审判。#天使 #小丑 #超人不会飞
00:53
超人不会飞
Рет қаралды 10 МЛН
Quando A Diferença De Altura É Muito Grande 😲😂
00:12
Mari Maria
Рет қаралды 36 МЛН
Is the Traxxas UDR still the BEST? Losi Baja Rey 2.0 vs UDR
10:31
AMain Hobbies
Рет қаралды 162 М.
Losi Baja Rey 2.0 vs Arrma Mojave 4s
15:05
bigbristv
Рет қаралды 5 М.
losi Baja rey RPM front bumper and skid plate install.
29:08
MIKES DUNGEON
Рет қаралды 56
Losi Baja Rey V2 Rear Axle Service
25:47
RC Guy Garage
Рет қаралды 4,5 М.
STOP Traction Rolling | Losi Super Baja Rey Shock Tuning & Spring Upgrade
18:40
Losi Baja Rey V2 Front Diff and a few things noticed
32:40
RC Guy Garage
Рет қаралды 9 М.
THEY ARENT MAD AT ME! | LOSI BAJA REY 2.0
17:32
Mark Santa Maria
Рет қаралды 71 М.
Losi Baja Rey 2.0 Tips & Tricks
16:07
bigbristv
Рет қаралды 7 М.
Minimaxx 3S Disaster?
9:20
Exocaged RC
Рет қаралды 6 М.
Max10 and 4000kv in the Losi Baja Rey 2.0
9:34
Exocaged RC
Рет қаралды 13 М.
小丑女COCO的审判。#天使 #小丑 #超人不会飞
00:53
超人不会飞
Рет қаралды 10 МЛН