LOSI Mini LMT Gravedigger I Broke it... Just a little

[@Addicted_2RC]

Glad to see you got to get your mini LMT. Thing is an absolute beast! I've ordered parts to convert one of mine to rear stear. I'm also thinking about going with the Hobbywing Quick run 16BL30 combo for a little extra kick. 👊👊👍👍

[@RcPlayer-tt2vw]

I wonder 💭 available yet , going stop by lhs today ,

[@RcPlayer-tt2vw]

My full size one so far from new , I should’ve bought a couple when they had the rollers and sales

[@Madmudder8]

There is one left in stock sitting on the shelf at RC Hobbies in Orlando ...see Nick

[@nj2033]

Everybody was moaning about the price until Traxxas released their toddler speed TRX4MT and now all of a sudden you realise why the price of the Losi

[@bloodangelphil]

Agreed, and I say this as a guy who likes the 4M platform. Save up for the 1/18 Losi, it'll be worth it. It's what I'm doing.

[@jgrc73]

@@bloodangelphil both is best plus more besides

[@jeremydeltasierra7788]

Nice! I picked up mine from my LHS on the 25th. I swapped in a Bluebird BMS-207WV servo (direct replacement with some ~1/8" standoffs) and threw away the servo saver. SOOO much better. Mine is getting a HW 2435/16BL30 swap soon.

[@PSF_RC-PatSmageFilms]

Hair on point👌

[@michaelandriessen]

Just bought the sun uva digger for my son and it’s hella fun. Going to get the grave digger now. It’s totally worth it when that smile hits your face.

[@BeardedStigg]

Just got mine a couple days ago servo was dead out of box, for a 17 $ servo what do I expect 😅. I ordered the reefs 179 for it hope I get to use it soon other than just wheelies lol. Other than that it seems like it's a good truck

[@reyvenrullan7015]

the day will come when I will be able to buy it for my son as well.. right now it is not low because my salary is just enough to buy food. if you convert it to pesos, the price here in the Philippines is expensive

[@mattferrell90]

Awesome vid. been beating on mine for a month now trucks a blast as long as you don't get one with Qc issues or blow out the shocks right away and there's all kinds of groups and forums with awesome builds and 3d parts people are doing to these

[@3dconceptsofutah757]

JUST OUT! Flags and mounts for these NEW MINI LMTs are on 3D concepts Ebay Store! Cheers!

[@frankensteincreations4740]

Can’t wait until you figure a nice brushless system for it… I know you probably already have one picked for it lol.

[@chriswagner6310]

That's cool bro

[@CM-ig2pf]

👍😁😎✌️that’s a tough little guy for sure after seeing this.

[@shyancole2490]

That little truck seems very tough it took a lot of abuse for only one shock being pulled apart I don't know if I ever go with the rear steer on it though it's so small I think the benefit you would get from it would not outweigh the headache it would create but then again I could be wrong it wouldn't be the first time LOL

[@LonnieHutchinson90]

Those are pretty awesome. You definitely should’ve went with the metal shop right off the bat.

[@ThePeter710]

love you're " beetlejuice" hair style 🤣

[@jerryvolpini7987]

She scoots! Great little truck, I'm sure you'll keep her stock! 😉😆

[@sammyboswelldirtybrc7580]

I would be interested in a thumb wheel for my spectrum remote

[@TheUnknown714]

I wasn't going to get this, but after seeing your video...i will now.

[@meirdeaph]

Yes that things awesome ❤

[@DoubleADay]

Have you found any limit straps for your mini lmt yet?

[@jinlongliu1514]

gpm has made limit straps for the mini, that will help save the shocks

[@RCRoads]

Awesome review. The mini is a great little rig. Personally I would love to have a full size LMT but the cost to maintain or upgrade is too high. This little guy looks like tons of fun even in it's stock form. Thanks for sharing it. I look forward to seeing if you do any upgrades. 👍👍🏁🏁

[@joshuakhan1042]

Awesome 👌 💯

[@reyvenrullan7015]

Great RC ..watching from philippines Rc car so verry expinsive in the philippines

[@junebugpetty7386]

It will not bind to the a Spektrum transmitter unless you change out the Rx motor and ESC. The stock uses SLT Protocol.

[@rhealgagnon1460]

Just saying the mini vxl fits right in 😂make it stupid fast

[@old-rcplane-phart]

👍😁

[@old-rcplane-phart]

MT12 tx includes an aluminum, fully adjustable thumb wheel.🤷‍♂️ $130. Just saying

[@boduke9428]

I've heard from reliable sources the 6000 kv Spektrum 2 in 1 motor esc combo will fit nicely in there and make that thing a little tornado. If this was Mojave Grom price it'd be a no brainer. At its actual price it's an easy pass for me. I just paid $300 out the door for the Redcat Valkyrie MT. That's almost what this little thing cost once tax is added. You gonna tell me this is equivalent to a 4s large 10th scale 60 mph Monster truck in any way besides price?

[@jgrc73]

sure I'd like to see the Valkyrie do 2 mile an hour wheel stand, or a backflip in your living room, or fit in your backpack. or be gravedigger. I think the Valkyrie is an awesome high speed bash rig, but you might as well compare it to sailboats or cantaloupes

[@rcpete7055]

😎💪🎉what camera are you using 🎥📸

[@kamall4773]

Hello, if I want to install another receiver I will probably have to change the Esc. Do you know how many amps the motor has? and the servo can you swap? Does what I have in mind actually work? I don't know that well yet. Best regards

[@ExocagedRC]

Not sure on the motor but a cheap hobbywing 1060 would be fine in it.

[@kamall4773]

@@ExocagedRC thank you very much

[@christianrambissoon1141]

Do you make thumb-steers for the slt2 for us small handed dudes?

[@ExocagedRC]

actually thats on my list and hopefully I will start getting prints on the website very soon

[@endosrc]

probably gotta lock them diffs up

[@Andre_M_3D]

Brushless please 😊

[@AllInRc1971]

After waiting for months from Amain, I happened across one at my local hobby shop. Def runs like a toy, the way most 18th scale do. But there is some fun to be had.

[@RcPlayer-tt2vw]

Just it but of a novelty item , my regular lmt has 100s of runs , some how original wheels are still good and I’m running them on the maxx now for snow ❄️ snapped a axle but I pushed it in single digit temps 😂 I did go through about 10 RTR and Amazon servos with the LMT, you must use a high end servo

[@AndrewSury]

@@RcPlayer-tt2vw I have 8 LMT 10s. Everyone run Savox servos. The sound grindy but they don't break.

[@mattferrell90]

Runs like a solid axle things a beast

[@RcPlayer-tt2vw]

@@AndrewSury nice , I’ve been using protek bl170 , I keep getting grinding in tranny , first I shimmed , than I changed gear with the shaft now I have a new ring gear for center diff but it could be the transmission flexing I should’ve just bought whole thing been done lol

[@RcPlayer-tt2vw]

It’s worth it in every sense , it will hold its value and easy to use

[@Spider66613]

Love grave digger.

[@jagergerg9771]

I only watch the channel because of Joes hair

[@rhealgagnon1460]

Limit straps are needed

[@rhealgagnon1460]

Haha I have the g digger 1/8 and I saw the uva mini bruh have to get it farther and son 😂

[@VictoriaJones-gy8es]

This is £270 in the uk, I'm not being funny but what are these companies smoking? Nearly 300 for a tiny truck, please don't take offense, cause you've got some wicked stuf/videos But this looks like it should be £60/£70 We shouldn't pay these prices, its getting out of hand, id like to get this but no way can I pay justify Nearly 300 quid, no way Good video thou bro

[@boduke9428]

For $300 "adequate" performance isn't enough. I have and like a LMT King Sling. I also know it's not really good at anything. It's not fast, handling is bad, and durability isn't great. Power is fine though. If it came with a 550 brushed motor I'd feel differently altogether. This is that. All it seems to have is the looks. I have a HBX 1/16 brushed that performs this good and is more durable. I got it off Amazon for $35 and it came with 2 batteries, 2 bodies, and extra parts I haven't needed yet. That licensed body isn't worth $235 to me. I'm not mad, just disappointed. I want to want this but I just don't. Plastic shocks for this price? Do better Losi.

[@meirdeaph]

😂 no way can u get anything close to this good for 35 dollars.

[@mfbengs1]

Price vs. Quality on these are just not there!

[@ExocagedRC]

oh its awesome man, it did great IMO!!