Lost communication with module chrysler

[@emmapilex]

Excellent straight to the point video. One video that teaches you how to fix module related faults. Good job Tech.

[@evemedina6976]

I want to say thank you for the step by step info on Chrysler. We finally got the Chrysler 300 to turn on .

[@jtbuilds9176]

Got a 2016 durango limited 3.6 with the U0212 code. Load tested can + and can- both in spec. Load tested power and ground as well all at module plug which led me to think the module was bad. Replaced it with a new OEM part from the dealer and same codes and wipers stay on with only horn function of steering column. Same issue but all good at the plug. This one has me stumped and it's going into day two at the shop of what was supposed to be a easy fix after the diag.

[@genasgang]

Oh how i need a tech like you for my 2006 Chrysler 300

[@WissamAbbas]

Hi what type of scan tool should i have to scan jeep cherokee 2021 and above?

[@lifeessentials9637]

I have a U0141 code mean loss communication with body control module what should I replace? Thanks

[@williamdowns2244]

I have a 2011 ram 1500 and lost communication with central gateway,radio "aftermarket",hvac and my key fob will not lock,unlock anymore. I do not have remote start 5.7 Hemi

[@tashondajackson1696]

What about 2015 Chrysler 200 ? I have no power in my middle console and was told my control modules was the problem

[@anothermoparchryslertech1466]

Yes it more than likely needs a control head.

[@tashondajackson1696]

Do I have to take it to dodge or can I get a mechanic to fix it ?

[@tashondajackson1696]

Is it very expensive ?

[@omar6garcia]

Cómo se llama el programa que usas para los módulos

[@pedritoc.c.t.665]

I couldnt find tha page the chart thing you said . do you have a link . for it ?

[@bryanvance6629]

My brothers 2016 jeep Cherokee latitude is doing the same thing. Where is the HVAC control module? Is it behind the head unit that has the 3 control buttons? I see a black box with 2 different harness connectors. His ac system is to be dead and all the fuses are good. None of them are blown.

[@Freebiesways]

I have 2004 ram 1500 and the instrument cluster will intermittently fail causing my headlights to come on, no wipers, a/c, no turn signals, etc. How can you diag when there is no signal and/or communication because of no bus where the odometer is? Please help !!

[@jameshorn2907]

How do you diag U0002 high performance can bus on a 2005 C300 5.7

[@rajanbrar6561]

I need a expert opinion. 2017 Jeep Cherokee. Trail hawk 2.4. Got tints. He removed batt. After a day I got cel. PSCM no communication (still had power steering. Or electric idk which I got. ) month later or so. Cel came one. Tried scanning. My scanned freaked car out. All dash lights and chimes and stuff came on along with front wipers. Reset it with a better tool. Had permanent codes for loss connection to tmc bcm pscm scm can c. Vehicle speed measure and vehicle distance measure. And can bus c code. All relate to the can bus. Could it be the battery is bad? Or should I just reset the ecu by taking off the bat for a while?

[@SkitzerPoindexter]

I hope you got your issue figured out. I've got the same thing going on with a 2012 300c. Same symptoms. However, I'm pretty sure my problem is related to rodent damage, as the car was barely used and was parked where it had happened to other cars. A low battery or a bad ground can cause the issue, or a broken (or chewed) wire can also cause this.

[@danielguerra5599]

I have a 2006 Dodge Dakota 4.7L V8 automatic transmission with trouble codes U0101 and P1603. The transmission is stuck in 1st gear and I have a bunch of transmission codes. Any suggestions?

[@MrBoraki.]

i have same problem can i pls have the part number for Chrysler 200 2015 s 2.4 I cant find it

[@williamareyes5457]

What about for this code U0141 on a 2008 Dodge Grand Caravan SXT 4.0L V6 Lost communication with ipm front control, fcm, and tipm, I already replaced my blower motor, and blower motor resistor, and my AC or heater work when it feel like it

[@azizm9034]

Hello Ram 2014 1500 laramie I got (U112c - U113B / U0140) active errors and B1D9B stored error. The 4X4 and all lower dash controls (traction/seats heat/tow..etc) are not working but i can control it from screen, next day the screen didn’t work! Before the screen went off i took the car for dealer and after diagnostic they said we want to replace the lower dash switches then check the BCM which is the switches cost around $1200 !!!!! Please help Thanks

[@erickdiaz5240]

Hello I have a 2016 Chrysler 300 that was jumstarted and after being jumstarted there was no crank no start after several tries the car tries to crank but no start and then eventually it will start air bag light is on codes are on for u0100 lost communication with pcm, c211b ignition run start imput circuit open, p0481, p0480 cooling fan and p258a electric vacuum pump circuit i think it's the pcm but wanted to know if you've seen this if you read this let me know thanks

[@rickyverrill4093]

I have a 2015 Chrysler 200 2.4 no start no crank tdc code u0100 any help bychance

[@rafamoore21]

I got a 2014 Ram that my local dealership cant diagnose... Maybe you have some input on it... While driving the cluster n center console goes black and the ac stops blowing as well... The truck keeps running as usual... Eventually after a few miles everything comes back... Any idea of what it could be?

[@khaosol]

Did you ever get the issue resolved?

[@rafamoore21]

@@khaosol Negative. They replaced several things.... ignition switch 2x, alternator n etc...got tired of it and traded it in

[@jawojnicki]

Why did you test all the voltages in a STATIC state? You could have 14 v at the connector when unplugged b/c there's NO current flow. However, plug it in and BACKPROBE it. You could have a voltage drop "upstream" from the connector and when the circuit is CLOSED, you are only getting 7 v at that wire! If you don't need to voltage drop test this circuit, please explain why not. Thanks so much!

[@anothermoparchryslertech1466]

That’s over thinking this easy diagnosis.

[@jtbuilds9176]

Load tested the one I am stuck on right now and everything checks out at the plug. New OEM module from the dealer and still no coms and still the same U0212. Load testing along with just static does not always show the issue and just because everything checks out at the plug load and static does not always mean the module is the issue as I am finding out the hard way.

[@tjkoen01]

I have a 2012 Durango R/T. It has an intermittent problem where it starts and runs for a couple seconds and then dies. Attempts to start without first turning off the ignition result in a 10 second or so crank with no start. The engine will start and run fine after the ignition is turned off. I have had the fuel pump relay recall done and I have checked the relay's function during one of these events, I know the fuel pump is getting power. Yesterday it did it again and I was able to use my diagnostic tool and saw that at least half of the 20 or 21 modules lost communication with the ECU; the ECU showed no faults. It will probably run for months without this happening again. Ever see or heard anything like this?

[@Highrev57]

Did you figure out what was causing it to not start?

[@moemoe0032]

Bumpp

[@moemoe0032]

@@Highrev57any updates boys

[@ZkReAr-fs5do]

Help I have a caliber srt4 , no crank no start, lights work and everything. When I try to get codes with the scanner it says no communication or lost communication with the pcm ..... I tested the starter and it works, battery is fine.... do you think it is the pcm ? Or tipm? I hope you can help me :( thanksss

[@anothermoparchryslertech1466]

I would check your power, ground, and bus circuits to the pcm. If they are good then yea you probably need a pcm. I just came across a wiring issue where I had everything but ground, so make sure you check all those things.

[@ladale21]

Any idea of a higher than normal can voltage such as 3.2 or low voltage of 1.6 , i got a ram from harvey flood all harnesses and modules replace except the harness from the dash to engine harness , star can showz 2.4 v but no comm with any module on the small stsr can

[@anothermoparchryslertech1466]

ladale21 you mean can (+) is 3.2v and can(-) is 1.6? There may till be a corroded short I side the harness you can’t see with all that water that’s probably your issue.

[@ladale21]

Another MOPAR Chrysler Tech i got a used harness for body and engine still no ckm with any under hood modules , found out at tge endof install that the main can wiring is a $100 (new) dash to engine harness, ill be replacing that next week

[@ronaldmcclemons3943]

Hey my 2007 chrysler 300c 5.7 battery died and now the ecu won't communicate with the abs module do you have any ideas what could be the cause

[@d13x001]

Fuse/s

[@jackross7_11]

I have 07 dodge magnum srt8 and I’m getting OBD II codes. They are as follows no communication with HVAP module, lost engine coolant message, lost communication with ECM/PCM, check TPM, small evap leak, misfire cylinder 2, my key stopped unlocking my doors, and my head lights flickering. I had my TCM replaced about 7 months ago at a dodge dealership I’m beginning to think they replaced the wrong part. I would really like your advice if u would. Does this sound like a bad ECM/PCM? I don’t know what to do; also, the car has 83k miles if that helps. Thanks

[@deangelostepeny5892]

Did you ever get this fixed

[@jonathansirimarco6215]

Hello, excellent video, my question is if when placing the new HVAC module you have to program it? Thank you

[@Rodneyzoom]

Is there a diy scan tool for diy ppl that's not too costly

[@_XavierSpencer_]

I have a question I had a 3200 stall converter installed and when everything was put back my transmission signal was lost can you help me out on what you think it could be?

[@anothermoparchryslertech1466]

Sounds like a wire for pinched

[@budgetbuilds6868]

What scan tool is that ?

[@kauaiboy111]

Can you do a vid on LIN Local Networks? Like a door lock switch to its door module? Only has one wire, no hi or low like CAN C. Thanks!

[@andinamm2246]

Excellent, you know how to do in 2012 and newer subarus? I have a crosstreck with this issue Thank you

[@xbsvocal]

Where is the module located in a Chrysler 200 2015?

[@tashondajackson1696]

I’m having the same problem

[@zachshelburg8101]

Did you ever find it’s location?

[@johnseaman5099]

I have a 2014 ram 1500 with a u0140 code but reset and hasn’t been back on but what would throw that code?

[@anothermoparchryslertech1466]

John Seaman almost anything but usually it’s just a bad intermittent connection. Those are hard to diagnose and you have to find out what lost communication with the BCM. Usually if you don’t notice anything abnormal going on in the truck I wouldn’t worry about it. About the only time I ever replace a BCM in trucks is for door lock issues.

[@Rhonda858]

Would that be a error code U1403? I have a 2016 Jeep Patriot and all the lights on the dash board all flash on and off like a Christmas tree periodically and where the mileage is shown it says NO BUS when the lights come on...the error code is U1403 that comes back...I just recently had the TIPM changed due to a accident at the dealership, but it is still having all the warning lights on the Dashboard Light Up and when I took it back to the dealership they act as if they've done what they could and they tell me that I need to take the vehicle to a a vehicle electrician to get it diagnosed but my vehicle still under warranty and I feel that it should be able to be diagnosed there at the dealership since they didn't fix the problem in the first place. What do you think? Any advice that you can offer me would be greatly appreciated because I feel like I'm at my wit's end with this vehicle already!

[@pitgrillersmx3237]

Hi there my friend, in my car, there is something weird. Jeep Grand Cherokee 2016. I have problems with my USB. It works in the morning, after a few hours driving stop working and i have to wait something's until next day to see it working again. I have already replace 3 times the media hub, same result.

[@alvarohinojos6085]

Which scanner have the same system system as the one you have?

[@juanhinojosa9784]

i have a 2009 town and country... i replace the battery and now my radio dont work.... and i got a code u0184 lost communication with radio.... how can i fix this issue

[@anothermoparchryslertech1466]

Juan Hinojosa check the main fuse for the radio in fuse box in the engine compartment. If it’s not blown you either have a break in the wiring or the radio is shorted internally.

[@hectoruriasjr8609]

Does the replacement HVAC Module have to be proxy aligned or programed for it to work?

[@skyline9263]

Look at my video bout my charger I dunno what it could be, I'm getting a no bus on the speedometer when it "tweaks out" per say. Thanks In advance.

[@jesusencinas8801]

What scanner did use in this video? Can any scanner work for Dodge Ram? Please help.

[@anothermoparchryslertech1466]

Jesus Encinas I used our factory scan tool. I’m not sure what you need help with but a scanner from any auto parts store should be helpful.

[@713Scarface]

@@anothermoparchryslertech1466 I have a 2016 Ram 1500 4*4 with 3 codes at the moment. U0402, U0001, P1DD2, something about failed communication with TCM but my truck is driving fine. Any suggestions on tackling this myself. I would really appreciate your help on this matter.

[@Slammed46]

Can + is 4.5.... can - is 2.4 .... is this acceptable?

[@anothermoparchryslertech1466]

NO ITS TOO HIGH. DISCONNECT THE OTHER END OF THE CIRCUIT AND SEE IF YO HAVE A SHORT TO POWER IN THE IWRING BY DOIGN A RESISTANCE CHECK.

[@mohamedyousary2010]

dodge charger se 2012 I have a traction control lamp on problem and no speed control working I put it on computer to check and the code was C006A49 And written multi axis acceleration sensor - Internal Electronic failure Please help because no body knows what is the problem

[@mohamedyousary2010]

The history of this lamp Morning when i start the car the lamp is on and when i move the car and turn left it turns off More than one year like this but ralery happens Now is always on

[@daiyebaker8555]

I had my engine changed out 4 months ago. 5 days ago my car would not start. They told me it was the module within the fuse box called 68143314af. It is going to be 1067 dollars to replace. Does this have anything to do with the engine. Is it part of the engine or a component to the engine? I have a 1 year warranty on the newer engine and need to know if theses mechanics are being dishonest with me.

[@anothermoparchryslertech1466]

What kind of car is it?

[@savannahprecious400]

I have a 2006 charger 3.5 sxt high output and i get a no bus on cluster and i get no fuel pump no starter no lights no window. It does nothing ... Ive changed eveything under hood as far as sensors go even changed the tipm and pcm and a new reprogrammed key and still nothing still the same NO BUS... iam litetally gonna fckn torch this damn car spending all this damn money for it not to work.... Is there anything you can suggest

[@edardon16]

Ufff after too many complaints this guy don't want to know anything about dodge, any ways let me try.dodge durango 2007...4. 7 won't crank any advice sir?

[@rrmech11]

Nice job. I have a u0168 loss comm with security module. But it's starting. Customer claims it didn't have a no start till the installed a aftermarket remote start. 2011 dodge ram 1500 5.7 hemi. Any thoughts after I check what you did on that hvac module. Powers and grounds and can network on the security module?

[@omarmonzo5426]

i have a 06 dodge sprinter and i don't have TCM communication. how to star to diagnostic this car?

[@anothermoparchryslertech1466]

omar monzo same basic way. You need to find your power and ground to the tcm and then check your communication wires to the tcm

[@omarmonzo5426]

ok i checked power & it has It. i check groung and resitence and ok so in this case in going to need A TCM?

[@anothermoparchryslertech1466]

omar monzo yes

[@jesusyeshuaelelyonelshadai6295]

I have like 25 u codes on jeep Wrangler same

[@o.z.5230]

Thx. Greetings from germany

[@lael7912]

Hello good man!! I have the same problem with my 2016 chrysler 200 s, nothing works, neither with the controls or my U connect, so I was wondering where the HVAC module for my 200 is located ? I would appreciate your help please! and thanks for helping with these videos !!!

[@tashondajackson1696]

I’m having the same problem

[@ItsAlwaysTech]

I’ve been having a really hard time fixing my car, it’s a challenger 2016, it honks by itself, the voltage drops but the main thing is the car keeps shutting off after starting and the hazards have gotten stuck a few times. I just bought this car and put all my money into it. The dealership also tricked me into signing a contract without warranty. Hopefully someone can help or knows what’s wrong. Does this sound like pcm/bcm?

[@darwinrankins8343]

Do you know where the bcm is located? On the 2016 charger se?

[@djjuniorquijano]

I think I have the same problem with my truck.. I have a 2018 Dodge Ram 5500 I got a lot of mistakes with lights Dashboard radio end air

[@newwavepressure6478]

Help lol I have a 06 Dodge Charger Daytona and I'm getting a vibration in low RPMs and when I'm stopping it feel like the car is like good to stall anyone have any suggestions motor mounts or is it the torque converter it's nothing the driveshaft it's in the engine or something I though it might be the MDS system messing up cuz it goes away when. I use the autostick

[@anothermoparchryslertech1466]

jack T check your spark plugs they need to be changed every 30000 miles and and sure you use mopar p.ugs or you will have issues. Start with that.

[@chocosongee]

My husband is a driver of Jeep Wrangler JK Rubicon (2015) Airbag light keeps turning on once he turns on the Jeep and never goes away. Malfunction code is U0151. Is this because of ORC module problem? He changed his clockspring but didn't work. He unplugged the airbag connector under the driver's seat and the passenger's seat and plugged them again and didn't work as well. If this is the problem of ORC module, is it possible to solve the problem by resetting the module? or anybody knows how to fix the problem? Thanks!

[@leopardo1570]

What if pink wire has no voltage

[@mdforsberg49]

Fuse/relay

[@rickyverrill4093]

Still work for the dodge dealer ship still bychance

[@anothermoparchryslertech1466]

I do

[@robertmedina6875]

Got busted at job making videos? Just gave up? The luxury of being a dealer tech is having known good parts to plug in like very expensive control modules. Most of the time you’ll probably be OK but you should load test any of those circuits. Good video. If you have the module you don’t have to load test them just plug it in and see if it works.

[@Chriselectricfingers]

So basically plug nd play take a chance with a new BCM MODULE when u get list communication code with the BCM!!!

[@anothermoparchryslertech1466]

You can’t plug n play a bcm. Bcm are vin specific and unless it’s programmed you wont have full functions of your vehicle.

[@Chriselectricfingers]

@@anothermoparchryslertech1466 well funny thing is that uf the BCM is from exact same car model nd year , will b just a plug nd play as far as for some one clarify this from a same car model nd yr dodge charger that is!! M just sayen

[@anothermoparchryslertech1466]

@@Chriselectricfingers the vin won’t be right though but good luck!

[@Chriselectricfingers]

@@anothermoparchryslertech1466 that dont matter long as it works like it should

[@ramirotorres1186]

What is part name

[@anothermoparchryslertech1466]

Ramiro Torres depends what isn’t working. This was an example of a A/C module not working.

[@ramirotorres1186]

I have code u0121 for 2014 Chrysler 300 engine 3.6

[@ramirotorres1186]

I have code u 0121 Chrysler 300 2014

[@anothermoparchryslertech1466]

It probably needs an abs module. But again check your power, ground, and communication wires.

[@ramirotorres1186]

if you change the abs module you have to program it 

[@jegg4489]

Andrew can I make an appointment with you I need help with a Dodge Durango 2011 is possible to ask for you at the dealer service?

[@anothermoparchryslertech1466]

IM IN ARIZONA. WHATS WRONG WITH YOUR DURANGO?

[@jegg4489]

@@anothermoparchryslertech1466 well it says is not communicating with abs module also some times don't start I believe is the tipm. Is been like that for over a year, last time I checked the stored codes they were to many. Also very low gas mileage is a 3.6L with 24 inch wheels getting only 9 to 11 miles per gallon😭. I thought you worked at San Marcos CA. What part of Arizona I go sometimes to Phoenix

[@jegg4489]

@@anothermoparchryslertech1466 hey Andrew is possible to change my engine from 3.6 to 5.7

[@williamjortiz7071]

Exlent diagnóstic thanks

[@edrdyo3cr]

whats the model of your scantool?? brand ?

[@anothermoparchryslertech1466]

Eduardo Gonzalez it’s a chrysler scan tool witech

[@naushadali95]

great video

[@jamestaylor-qb9wo]

This was my exact problem so I went to a junkyard and finally found one and now i have ac

[@andrewr022488]

Did you have to program the module?

[@Jack-Surreal_Panes]

Same with my ram. Those suckers are expensive. Junk yard less than 100 vs the cheapest one at 450. They go from 450 to 995.

[@soexxxtra918]

I have 2006 Dodge Charger rt 5.7 n have a 0700 code n u0100 code it says I loss communication with ecm/tcm it would just randomly stall should replace the tcm or pcm or should I replace both

[@anothermoparchryslertech1466]

Infamous M.O.B. Spark plugs that are not oem can cause random stalls. Also the pcm and TCm are the same module. I would try spark plugs first and then double check the actual wiring harness for damage

[@soexxxtra918]

Another MOPAR Chrysler Tech the dealership gave me a full tune up and changed one coil that had carbon tracking it ran good for a while then started back stalling recently I just had the computer read at autozone the info that I gave you above is all that’s it’s saying everything else checked out find

[@kathylewis7543]

I can't find someone that can check this for me in the Albany NY area can you tell me what tools you need to check electrical on A 2005 PT Cruiser non turbo lost communication to OBD2 and throwing codes a crazy first started done the rabbit hole 02 sensors low voltage before lost OBD2 port... replaced them. Had lije 5 people check it with their reader the the last person list the OBD2.... then flash on the cluster code for oil sending unit... replaced that the crankshaft sensor replaced that ... now both 02 sensors low voltage and brake/ cruise control switch. .. I just replaced the ignition swith which seemed to give it more power and removed the multi switch do you think I pulled a wire out or any help greatly appreciated

[@d.j.9961]

My advice to you since you are in New York, Go see Eric O, at South Main Auto!!! He is in N.Y. & HE IS GREAT!!!!!! Look em up online/you tube under S.M.A OR South Main Auto LLC

[@bozomartin3191]

Andrew (from name on shirt): Just wondering if you are in the San Marcos in Texas (as there are towns named that in many states) and, if so, are you available to do mobile work? I am in Gruene, just south of San Marcos, TX and having issue with Caliber that I thought was just about repaired and now it is a no crank. Anyway, please let me know. I tried to find way to contact you privately but did not see email. Pretty amazing the number of views on this video compared with some of others I looked at on channel in same category.

[@anothermoparchryslertech1466]

I was in Texas but that was four years to go I live in the east valley of Phoenix now.

[@cookingwithjesus]

What? youre not going to break out the oscilloscope lol. Great video

[@herockhernandez2794]

i know right... you noticed that he used a different scanner tool that told him where the problem was that easy!

[@evemedina6976]

I need help with my 2006 Chrysler 300. Code U0101 is what shows on diagnostic. We have called a tech and he said throttle needs replaced. The car won't start

[@martinmarquez7955]

Hello Eve Medina, Im having the same problem with a 2006 chrysler 300. How did you fix?

[@giopirmisashvili5514]

Thank you

[@DavidGutierrez-zi4dy]

EXCELLENT

[@mitsumike6g729]

Thank u so much

[@mz.pinkney]

I paid $700 last year to have the body control module replaced and another $600 yo replace the radio. Now the same thing the ac was doing last year, it’s doing it again! Plus my signal light and brake light on the left side is now out. I paid $42 for the damn bulb and it still didn’t work. All this was done at Chrysler! Theyre tryna rob people blind! Now I’m getting a u0168 code. I think they installed a bad BCM or didn’t change it at all last year

[@fishermanoflight]

He's probably scared Mopar will charge $500 to replace a battery

[@MrOlivos666]

Mine started right after I took it to the dealer for an update

[@ZanstMahmud]

Thanks broooooo

[@geraldito7777]

¡THANKS!!!!🙂

[@nico71968]

You save me bro

[@mauricionorberto538]

i m the same problem with my crysler 200 2016

[@anothermoparchryslertech1466]

Mauricio Norberto you more than likely need a new control head and those are super easy to deal with.

[@edardon16]

By the way the durango is not mine,I remembered many years ago a friend buyed a sport car a dodge charger I asked him how much he paid and he said forget about it,never ever buy a dodge...I listened

[@autodiagnoser321]

Hai

[@vladimiramador8178]

6:15 99.% Model thats it !!! look No forward thank you

[@alexgonz5550]

🍺🍺🍺🍺🍺👍👍👍👍

[@ralphpercy4846]

99.9% of the time its the Module? Far from the truth.. Such a lie.. i find these all the time. Wires and connectors are mostly the issue. and the pins corrode

[@anothermoparchryslertech1466]

Why would I lie? That's from experience. If yours is different that's fine, in my experience that's what I find.

[@qamarkey1024]

Do you have social media or a email I can contact you on I have a problem with my control module and I need assistance

[@clos432]

My 2016 challenger sxt won’t start obd scanner code popped up lost com with ecm/pcm any help??

[@anothermoparchryslertech1466]

C Los does it do anything? Is it keyless go? Will it go to the run position? If it won’t go into the run position then you probably have a key issue or RFH issue. Let me know.

[@clos432]

Another MOPAR Chrysler Tech yes it’s keyless push to start , I’ll try to start it and it’ll say run but won’t start or crank and then the dash will be lit up with codes

[@anothermoparchryslertech1466]

So with it in the run position if it doesn’t see the pcm you need to check for power and ground and your communication voltages. To be honest though we don’t replace allot of pcms. You may have a broken wire. But I would start at checking your voltages.

[@jerryyanez8607]

I have a 2014 grand cherooke and the mirror ,window ,ambient light not working but the turn signal on mirror won’t shut off any ideas maybe door control module

[@anothermoparchryslertech1466]

It pulls either be the Mirror assembly or the door module.

[@lenorddelafuente4084]

Great 👍