Lotus 170W Rotary Tool Kit Review - By DIY Dad (Wood Pusher)

[@irenemelaniegerona48]

How to fix the extension geinder head? I can't remove the cord inside that is usually loose

[@adreanluriz1378]

Very informative, more vids pa po for this tool, galing mo magexplain sir

[@Gregoriosplace]

can't cut wood with it. no circular saw blade attachments?

[@josephjimenez7629]

may base plunge attachment iyan, or kung ano man ang acompatible attachment..

[@channelnijuan5669]

Galing mo kuya. I love your enthusiasm and fluency sa pag discuss. 👏👏 Keep it up!

[@DIYDADWoodPusher]

Thank you so much!☺️❤️ That time it was my 5th day in a quarantine facility, to make life a litlle lighter i made that video. And by using that tool ni-repair ko lahat ng visible na pwedeng ayusin sa quarantine facility.🤣😁

[@DIYDADWoodPusher]

kzbin.info/www/bejne/i6fShWx5mMZ8l6s

[@javapua]

Have u tried how long can u continuously use it before it starts to feel like it's heating up?

[@DIYDADWoodPusher]

About how long i used it continuously w/o a gap; matagal na yung 1 min using the flexy drive assembly. If yung mismong shaft ang gamit jab jab lang pang cut for about 10 secs. Mas madali for sure siya iinit if you are using the shaft since hawak natin unlike if it is hanging at FDA gamit natin hindi un agad iinit.

[@javapua]

@@DIYDADWoodPusher thanks sa info

[@EryqBadTrip]

Gusto ko'to hehe Madame na akong naiipon sa isip ko BossA, bute napanood kovitong vijo mo.hehe.

[@kryptomiadeathmetalizer8628]

sir para saan po ba mainly suitable ang rotary tool?

[@jeffreymajadas8124]

Saan ka naka order nian lodi

[@hoyitsmau]

Kaya po ba pang drill ng semento or pader?

[@DIYDADWoodPusher]

Hindi po

[@hoyitsmau]

@@DIYDADWoodPusher thank you po dapat Pala ung drill hammer talaga

[@ivancunanan644]

Magfit kaya sa kanya yung plunge router attachment para sa dremel?

[@xieka6421]

very informative good job!

[@DIYDADWoodPusher]

Thank u si much po!😊

[@drolen8404]

kamusta na po ngayun yung rotry mo sir?.mag order sana ako ngayun ng ganyan.

[@DIYDADWoodPusher]

Working pa din😊

[@drolen8404]

slamat po..

[@burncasanova]

Thank you brother 🤝 kaka receive ko lang sa akin. D ko alam pano gamitin 😅

[@lollol-mg9cr]

bakit wlang kasamang circular saw blade?

[@ybithasue8832]

paps pwede mag tanong normal lang nag spark kunti sa male plug kahit naka off.

[@DIYDADWoodPusher]

Ay hindi po. Baka may problem ung outlet nyo

[@garpjr1188]

Bakit po ung flexydrive ko sobra iksi nung bit, nakatago sa loob nung metal screw-cap. Kailangan ko pwersahin palabas gamit long nose pliers, at pahirapan ikabit kc parang 3 kamay dapat gamit.

[@jeeeeev]

mahina ba tlga ang 1 halos di na umiikkot?

[@DIYDADWoodPusher]

Pinaka mahina. Kaya ho 1. Pwede naman mag 2, 3, 4, 5 or 6 king gusto nyo mas mabilis na ikot.

[@jeeeeev]

@@DIYDADWoodPusher pero yung sakin di talagga umiikot e. normal ba yun? di ko kasi makita sa vid nato gaano kabilis ang 1. sakin pag nasa 1, halos ayaw umikot.

[@DIYDADWoodPusher]

Bka po defective. Pwede po kayo mag reach out sa lotus para ma check po unit nyo.

[@crunchyfriedrice2586]

Ask lng po pwde po ba eto pang drill sa wall

[@DIYDADWoodPusher]

Hello po! Hindi po xa designed for concrete wall eh, if gypsum or mga wooden boards kakayanin po cguro.☺️

[@sarahinas8252]

pwd po ba sa glass wine?

[@DIYDADWoodPusher]

Yes pwede po sa glass etching😊

[@nancydecastro2071]

Matagal ba uminit yan?

[@kimmydomingo-aguila3132]

Nice!

[@DIYDADWoodPusher]

Ui! Salalamat! God Bless 😊❤️

[@juliandinopol7361]

Just bought a set of lotus rotary tool kit. Meron po ba mabili na mga accessories nyan?

[@DIYDADWoodPusher]

Sa handyman po at wilcon meron ako nabili before☺️

[@joeltonacao8060]

Sir good day san tayu maka order and hm the price po

[@markconsolacion4203]

Pakita naman ng speed ng no. 1 Diydad boss? Para mkompara natin Yung rotation nya

[@jobarjomadiao3807]

Good day po. Gusto ko po sana malaman if which one is better?? Dremel 3000 or itong lotus 170w? Thank you.

[@DIYDADWoodPusher]

Hello po! To be honest hindi ko pa na try ang Dremel 3000 pero pinangarap ko magkaaroon nun before, then i ended up having lotus rotary tool instead kasi mas mura at the same time andali makahanap. And so far until now in good condition pa din xa.☺️

[@jobarjomadiao3807]

@@DIYDADWoodPusher I guess I will go with the lotus. Napaka hirap po humanap ng dremel 3000. Thank you and all the best po! 🎉

[@DIYDADWoodPusher]

Yes po! Mejo hirap hanapin sa market now mostly 2nd hand unit ang meron. Oks naman po ang lotus.👌💛

[@reynerioaustria1766]

Sir qng bbilhin yng one set,mgkano po yn.

[@DIYDADWoodPusher]

Hello po! Ang bili ko po nyan sa wilcon na naka sale ay 2,900.00. pero tyempuhan mo ung promo ni lotus sa 11-11 bka mag 50% off xa.😊

[@DonDIYProject]

Nice channel Dad hehehe, keep it up brader. Already subscribed.

[@DIYDADWoodPusher]

Naku maraming salamat brother! Just started my channel hehe. Na inspired kasi ako sa mga katulad nyo.😁✌️😊🔨

[@DonDIYProject]

@@DIYDADWoodPusher ayus yan. Enjoy mo lang.

[@DIYDADWoodPusher]

Salamat bro! Yeph! Un naman ang punot dulo ng lahat, ung passion at enjoyment hehe.🔨😊👍

[@ricardomendiolapinedajr14]

Wala po bang Tagalog version

[@jimrex86]

pede kaya png dril ng napotol ang head na turnilyo? mas malakas to kasi 170w kaysa ingco 130w

[@DIYDADWoodPusher]

Kaya naman po cguro sir. Basta drill bits na pang bakal gagamitin nyo, with variable speed selector naman na din po kasi siya.😊

[@MhylesAraneta]

tag ilang yan

[@ralph5640]

San mo nabili sir?pwde pasa ng link

[@DIYDADWoodPusher]

Wilcon sir☺️

[@ralph5640]

@@DIYDADWoodPusher rotary tools po sir..shoppe po ba or lazada?

[@DIYDADWoodPusher]

Sa wilcon ko po nabili yan☺️

[@upperrank1230]

Ang Ganda Ng pagkakareview thank you daddy 💦

[@DIYDADWoodPusher]

Salamat po!☺️

[@allenmeer3661]

Kaya bang ihandle ng flexydrive pag nasa maximum speed na? Thank you in advance!

[@DIYDADWoodPusher]

Hi bro! Ive tried it upto 6 speed pang pilot hole sa kahoy, kinaya naman kaso mukhang hindi tatagal ung cable pag ganun lagi ang gagawin. It was designed for low speed lng kasi eh. Pero if pa jab jab na gamit lng kaya naman cguro.

[@allenmeer3661]

@@DIYDADWoodPusher thank you sir. More power to your channel!!

[@DIYDADWoodPusher]

Maraming salamat!♥️🔨

[@leslyserfino8327]

For cutting sir

[@2911loops]

Nagana pa po ba?

[@DIYDADWoodPusher]

Yes naman po!☺️👌

[@ヨハネスディッパー]

Suggestion lang po kung pede sana mas close up yung kuha kapag nag papaliwanag po kayo hehe. Already subscribed

[@DIYDADWoodPusher]

Hi! Thank you for subscribing!😊 Your comment will be put into consideration don't worry!😉 Btw, you are referring to; the shot must be much closer to me or to the object? Thanks!

[@ヨハネスディッパー]

@@DIYDADWoodPusher yung object po, tapos mas ok po siguro kung side view yung angle ng cam imbis na top side view. Yun lang po sir! Salamat po sa pag rereply hehe

[@DIYDADWoodPusher]

@@ヨハネスディッパー No problem! Will consider that on my next video😊. As of now kasi i have limited accessories to hold the cam since currently i am in a quarantine facility, and yes! Naka quarantine ako (not in our house) while filming that video.😁😅😆. Would you believe that my phone that time was just hanging on a chair which was also on top of another chair.😅😆. Pero pinoy tayo eh, hindi tayo papayag sa wala.😊

[@ヨハネスディッパー]

@@DIYDADWoodPusher Wow that's so cool, I thought you had a over head tripod in that vid! 💯 Saang Quarantine facility po kayo? You're still allowed to have deliveries of some sort?

[@DIYDADWoodPusher]

@@ヨハネスディッパー i wanted to share you some behind the scene photos or vids about filming yesterday kaso hindi pwede mag share dito ng ganun😁. You could message on my FB acct. if u like. I could share some with you.😊 Search my FB account - Von Ryan Vera.

[@arjay1739]

Hi po! Kumusta naman po yung tool niyo ngayon? Gumagana pa po ba?

[@DIYDADWoodPusher]

Ay yes po! Ginagamit ko pa din xa. Madalas pang sanding ng loob ng small holes.😊

[@arjay1739]

@@DIYDADWoodPusher ayos. Ang husay Sir ha, nagrereply tlga sa old vids👍magsusubscribe na ako😁

[@DIYDADWoodPusher]

Yup! If need ng kapwa natin ng reliable informations then why not tayo tatanggi tumulong?😊✌️💛

[@arjay1739]

@@DIYDADWoodPusher ayos yan Sir. Keep it up! Salamat!

[@jiggsaw7010]

Pansin kong issue dyan maluwag talaga yung sanding sleeves

[@DIYDADWoodPusher]

Ang ginawa ko po dun ung manipis na double sided tape. Solved po ung problema.😊

[@janecalum8253]

@@DIYDADWoodPusher thank you sa tips

[@christiansimon3732]

sir kumusta po gamitin after many months ? okay padin ba?

[@DIYDADWoodPusher]

So far sir in good condition pa po yan until now.☺️

[@batsonx]

Hindi Gumagana yung number 1 sa speed setting sir

[@DIYDADWoodPusher]

Message po sir kayo sa Lotus FB page para po ma assist kayo ng field technicians nila☺️

[@maryjanetambaoan7977]

Pwede po ba to pang cutting sa mga kaha ng motor/sasakyan

[@DIYDADWoodPusher]

Fairings po ba? Kaya po un😊

[@adorableallia3202]

Galing!!!!

[@enzoboyvlogs9301]

Nabanggit po b ung price

[@DIYDADWoodPusher]

Check this on sale xa facebook.com/1563146637302284/posts/3099119267038339/ 😊👌💛

[@enzoboyvlogs9301]

@@DIYDADWoodPusher wow laki ng discount. Thanks po

[@DIYDADWoodPusher]

@@enzoboyvlogs9301 add to cart kana po.😊 Try mo din i browse ung other post ng Lotus sa page nila, ang daming promo.😊

[@leslyserfino8327]

Sir meron ba syang blade for wood

[@DIYDADWoodPusher]

Hi! Wala tlaga xang kasama na blade for wood. Pero if maliliit lang ang puputulin like dowels pwede na cguro gamitin ung cutting disc for metal☺️

[@adorableallia3202]

Lotus Philippines naman!!! 🤗

[@DIYDADWoodPusher]

Hahahaha #BakaNaman

[@gingercrop5855]

Magulo audio pero salamat

[@jiraiyasannin2643]

boss bat sakin ayaw gumana ng 1

[@DIYDADWoodPusher]

Hi bro! B' new mo nakuha unit mo?

[@SirHelios]

The device itself seems okay, but all the accessories are really cheap crap. I would not work with that.

[@rynevlog2606]

Pwede po ba yan pang ukit ng lapida