Low-cost ECG & Heart monitoring system with AD8232 using Arduino.

[@samehbouhafs7259]

Hi great topic !!! But i'v tried 100 times the same way that u did , I can't ever get an classic ECG graphic like yours , please help

[@electronicsinnovation]

Try after removing ac power supply like adapter to your laptop. AC power supply can cause some noise.

[@tekraynak]

Hi, I have zero experience with soldering. Is it possible to create this setup without soldering any pieces together? Specifically the 5 jumper cables connected to the AD8232 - do those need to be soldered on?

[@electronicsinnovation]

As you can See in the video, I haven't use any solderon for connecting module and Arduino. This project doesn't require any soldering. You can make the circuit easily by connecting female to male connecting wires with each module.🤘

[@tekraynak]

@@electronicsinnovation Thank you. Most of the AD8232 I have seen do not appear to have the 5 header pins already installed but rather have holes in them, e.g., www.sparkfun.com/products/12650 Do you know where you found a module that already has pins? Note that I think your links #2-4 point to the same page.

[@electronicsinnovation]

I think, no. You cannot get the soldered module. You can do one thing that, visit near by mobile phones repairing, or any electronics repairing shops and get the module Solder on. Or else get a solder-on do it by your self. Its not a big deal. You can mail me at "[e-mail]" for further assistance on Solder-on.

[@arthurceci8152]

Can we get rid of all those little spikes and have a smooth EGC wave form? Great work!

[@lanphanh]

This is an excellent program! Is there a way that we can connect the OLED screen to display the graphics on OLED screen? Thanks!

[@electronic7979]

Nice project 👍

[@vanshagarwal8879]

my E.C.G. is not showing any 3 digit number on the monitor and just showing "!" mark and thus plotter is also not representing anything

[@electronicsinnovation]

You need take care about the Baudrate of the Serial monitor and Serial plotter. Change Baudrate to 9600. It will work surely.

[@bharatjain8106]

@@electronicsinnovation it is still not working. i have checked the baudrate ,it is 9600. the plotter is showing the heart beat from the base and it is uneven.

[@electronicsinnovation]

Could you please send a mail to [e-mail] with the screenshot or your issue and the circuit connection you made? So, it will easy for me to figure out your issue and help you.

[@LeviAckerman-yr2sp]

Even I am facing the same oroblem

[@jyotishyadav1194]

I am facing the same problem...

[@jyotishyadav1194]

Bro my heart reading is not. Coming properly like yours please suggest me something

[@Thecrazytv3]

Reading fluxwait between 300 to 500

[@Moonwalkerrabhi]

Hello can i use this for EMG Measurements too????

[@electronicsinnovation]

Yeah, you can.

[@shayarhashim7567]

You have atrial fibrillation according to this ECG

[@electronicsinnovation]

Ohhh...Is it required to consult a doctor???

[@shayarhashim7567]

Electronics Innovation you need to make a real ECG to confirm

[@electronicsinnovation]

@@shayarhashim7567 Ohhh...okay...

[@vrushikashah6862]

Heyy I really appreciate ur hardwork ..👍😁 grt job.. as I'm planning 2 do same project ..can u please help me if any problem is there ?? Plz reply

[@electronicsinnovation]

Yeah, please reach us on [e-mail]

[@hotchoco9494]

How is the AD8232 being powered?

[@ktgamingoriginal3992]

From 3.3V pin i guess

[@nounouibh3962]

Great work! Can do "signal processing" to this signal(I mean c we calculate all the different waves)?

[@electronicsinnovation]

Yeah, We can do that also.

[@nounouibh3962]

Great, thank you ! Is it with MATLAB or even with arduino?

[@electronicsinnovation]

If you want to count the spikes you can put a threshold and count them, but if you wanted to do deep analysis you can do in the MATLAB also.

[@nounouibh3962]

I will try to do it on MATLAB so thank you!

[@alinasir1879]

Hey Man, I'm doing a project on detection/ chances of occurrence of heart attack using the same sensors. I want to ask is it possible by just these values on the serial monitor?

[@nikhil.nikhil]

Iska output hum mini 2.4 tft display pr kaise dekhe plz uspr video bnao

[@electronicsinnovation]

Currently I don't have this module, if lockdown in India is removed, I will get this module make another video...

[@nikhil.nikhil]

@@electronicsinnovation ok but video bnana jrur

[@uco701aarthib7]

Using this can we detect heart attack?? If any one knows kindly make a reply....

[@milavanlierop9000]

In my serial moniter is only the '!' and in the plotter I don't see anything. Can somebody help?

[@naveenshaw6110]

can i get a flowchart and full code for this?

[@kumarkid6929]

Super cheta

[@electronicsinnovation]

Thank you cheta

[@chathurafernando1299]

Hey ! if i want to put this plot in a webserver , What should i do?

[@electronicsinnovation]

Mail us at [e-mail]

[@georgeserrao7984]

how to see the graph in the android smartphone. How to connect it to the Arduino and also see it on the phone

[@electronicsinnovation]

Search for any serial plotter for android. phone...

[@electronicsinnovation]

there is a app called "Serial USB Terminal" which can allow you to display Serial log. but this doesn't have any provision for graph plotting. so search for any such apps.

[@georgeserrao7984]

@@electronicsinnovation For subsequent use do we have to burn the code again?

[@krishjodu3559]

Superb bro!

[@speedlast9359]

Common subbu annaaaa.... 😎😎

[@rahulparmani3967]

Can the 3-digit monitor reading data be saved in a text file?

[@electronicsinnovation]

Yeah, we can save it.

[@georgeserrao7984]

Can I get the flowchart diagram of this

[@electronicsinnovation]

please mail at [e-mail]

[@mahantburman4059]

Hii I have mailed you I got an issue

[@Mohamm-ed]

Can we measure the r-r peaks ?

[@electronicsinnovation]

Yeah, we can measure. you can keep a threshold value in if condition. Then increment a variable whenever the if condition is true. you can get no of peaks for that particular interval of time.

[@Mohamm-ed]

@@electronicsinnovation thanks for replying... i appreciate your help

[@theengineer7627]

how to calculate the heart rate from this

[@electronicsinnovation]

Using current millis(); function to check for 60 seconds, and detect the peaks(> 500) in that particular interval.

[@theengineer7627]

@@electronicsinnovation can you help me with the full code

[@electronicsinnovation]

please drop a mail at [e-mail] with clear explanation of your requirement.

[@srivallisubhashini6194]

done a good job

[@charliejimmy5160]

I realize Im quite off topic but do anybody know a good website to stream new movies online ?

[@ryanwillie3586]

@Charlie Jimmy i watch on flixzone. You can find it by googling =)

[@kashkoa8355]

@Ryan Willie Yea, I've been watching on FlixZone for since march myself =)

[@charliejimmy5160]

@Ryan Willie thank you, I signed up and it seems like a nice service =) I appreciate it !

[@ryanwillie3586]

@Charlie Jimmy You are welcome :)

[@jyotishyadav1194]

Bro my heart reading is not. Coming properly like yours please suggest me something

[@ayesha7oo2]

Can the graph be recorded in the laptop? Please help

[@بشارحسنعسكر]

use data streamer in microsoft excel

[@jyotishyadav1194]

Bro my heart reading is not. Coming properly like yours please suggest me something

[@jyotishyadav1194]

Bro my heart reading is not. Coming properly like yours please suggest me something