Low Rider ST 6.5 Thrashin Supply Riser Install

In this video we install on my 2023 Low Rider ST the 6.5 Thrashin Supply risers.
NO CABLES NEEDED!!!
Looks super sick and very easy to install.
Please Like, share and subscribe.
Links down below.
Thrashing Supply 6.5 Pull Back Risers
www.thrashinsu...

[@halejermichael]

Man you don't know how much I needed this video. My Harley wanted a fortune to do the same job. I think your the only one who explains the install now I'm confident I can do it on my bike again thank you.

[@yamayari8351]

Your welcome. Super simple. Probably a 2 hour job taking your time. But hey, some people have all winter lol ride safe.

[@notverygneiss]

Hey thanks, perfect amount of detail and good note on the bolts not being included.

[@tommyjusz]

Could have loc-tited every bolt on your bike with all that lol. Good video, confirmed my suspicions on install without extended wiring/ cables thanks!!!!

[@tyronemoore4830]

Hey, bros, I was watching a BlockHead video and he was changing his risers and bars off of his 2020 Low Rider S. When he took the stock risers off he took a pair of vise grips and unscrewed the bolt out of the stock risers and used them for the new ones. This comment was just for informational purposes. The Bible says that we die for lack of knowledge.

[@tyronemoore4830]

I'm glad you made this video, cause I just brought those same risers for my Low Rider S.

[@stevewilson8752]

Grat video matey 😝👍 ive seen a few guys doing this exact installation but they do it somewhat the wrong / or slower way ! You do it more correct & much faster & less work 👍😀 Cheers from Bundaberg Australia 🇭🇲🍹🕺

[@user-tu6wo9gu2w]

Excellent video. Yours is the easiest to follow along. Most impressive.

[@markgreen2488]

Great video!!! You didn't need to over apply the blue Loctite on the riser bolts. With Loctite, a little dab will do ya!!!

[@freddieRODZ]

This bike looking fire. My guy. Cant wait to see it

[@yamayari8351]

Soon I hope! Thank you! I’m trying to keep it club but not so club lol if that makes sense. But so far I feel it’s looking clean and spicy lol miss y’all homie.

[@TheSkyhighmusic]

I just bought this but I also bought the thrashin bushings cuz a lot of people sed while it will work without it will be better..

[@mikeestevez5047]

Ty for the video... I hope you dont ever havw to take those risers off with all the loctite you used lol. But ty for breaking it down. You earned a new follower

[@yamayari8351]

@@mikeestevez5047 thank you 🙏 yaaa lol I went a little overboard on the LT, but I have taken them off since then. Not that bad lol but not that easy either. Ride safe.

[@mikeestevez5047]

@@yamayari8351 why did you take them off? did you have to go higher or the risers?

[@VaughnDingus]

I’ve been wanting to those stock risers. My street Bob risers are too short and I want to sit back a little. Thinking they may hit the spot. Looking for some on marketplace

[@Danny.leon02.]

Nice man I got the same bike bought the same risers! Question did you customize the seat on saddlemen? Or did you already find one customized online? Thanks!

[@h.d.mech.mortenson2098]

Good video. You just needed two things lines of loctite at the most. Looks like a quality product.

[@xkraztv]

this works on the 2022 model as well? I dont want to remove the fuel tank ..

[@justinmorgan8811]

How tight was that brake line after that? Are you still able to rotate the bars to any height?

[@tyronemoore4830]

Did you need to change the brake cable

[@yamayari8351]

No I did not. Ride safe.

[@sabirmiah6135]

I watch so many of these install videos and I gotta say, you make it really easy to follow along. Most people skip through the essential parts. Do they sell the bolts on Thrashin's website? I haven't seen them there. Also, are those mid bend bars? I'm 5'6 and I was thinking of going with 6'5 risers with mid bend bars. Not sure if it''ll be a good height for me. Any thoughts?

[@yamayari8351]

I love the pullback, a little more comfortable. That’s my opinion. Ride safe!

[@agileinc.peopleoptimizewor1638]

Great video mate, one question though I checked with HD over here and they told me that it wouldnt work, reason is that all cables would need changing, anz issue on your side? (those are the 6.5" right?)

[@Mike-jf4kf]

the bolts come out so you can use the factory bolts

[@rayramos7200]

Thanks for this video! So do you feel any improvement with the 6.5s or do you wish you went 8.5s ?

[@yamayari8351]

I’m 5’10 so as of now it feels great! But a few hundred miles from now will be the real answer. I’ll try to do an update. Thank you 🙏

[@micheallinderman481]

What is the angle of the bar, on the sweep?

[@wikeywikeywhick3852]

can you reuse the factory top clamp with the gage in it? i,m not sure why they give ya a new one?

[@Woodmeister8]

Great video on the install! Where did you get your seat from?

[@user-tu6wo9gu2w]

Didn't see in video but did you change out the bushings? I was told that Harley Recommends changing them out.

[@JasonRidesmoto]

Great video! Did you replace the stock orange blinkers too???

[@eeepmeeep]

Are cables needed for the 2023 breakout, or is it not needed for any of the softtails?

[@MIKE-wq3xl]

What is the name of the powersports dealer you delt with ?

[@HDLowRiderST]

So you can’t reuse the stock bolts at all? How long of the bolt did you purchase anyways? Website doesn’t say how many inches of the bolt

[@NastySt]

I’ve been looking around for that info too. They say 1/2 x 13 but don’t say how long.

[@petered92]

Do you think you will need to extend the break cables if you do the 6 inch risers with no pull back?

[@yamayari8351]

To be honest??? Not sure. But you can email their tech support and I’m sure they can tell you yes or no.

[@Shellbabyy]

How’d you get it on sale? Best straightforward video 😊

[@yamayari8351]

I feel I paid regular price lol what are they going for now?

[@Shellbabyy]

I still paid $595! but when you were on their website on your video it had it discounted lol

[@yamayari8351]

@@Shellbabyy that was the Black Friday sale price lol I missed it by a week!!!

[@MrSuzukiyamaha]

So no cable or wire extensions needed? Turn to turn is good?

[@yamayari8351]

Yes sir with the 6.5 stock everything will work.

[@PeiL-pr6id]

how tight are the cables? I read somewhere that someone installed the same set-up and had a leak about a year later, due to the stretching of the cables. @@yamayari8351

[@njager13]

Do you remember how long the bolts were that you had to purchase? 2 inch? 3 inch?

[@xkraztv]

I’d like to know this too.

[@jjjjjjjjrifufjssjosskenf]

Quick tip, don't go so crazy on the threadlocker.

[@davidpedersen9180]

And use orange threadlocker. It's made for hand tool use...