In this installment we lower a 93 Ranger with a 3 / 6" drop kit. Took about 2.5 hours. Install difficulty is a low medium.
Пікірлер: 87
@GetaJetta Жыл бұрын
Bless your soul boomhaur
@ballsoutperformance Жыл бұрын
Yea man, tahkun bout dag on drops man, dag on uh ford ranger man, on da dirt man.
@ChronicallySmokinChronic Жыл бұрын
I was thinking the same 😂
@Bandaid-vg2pk6 ай бұрын
Lol same😂
@MultiJohnmike5 ай бұрын
He always got the women
@ballsoutperformance5 ай бұрын
I still do
@damienambrosia2589 Жыл бұрын
Can you put the link to the kit in the comments
@averymcdaniel423 Жыл бұрын
How is the ride? Do you feel every bump?
@ballsoutperformance Жыл бұрын
Not too bad. If you get quality parts and good shocks designed for a drop kit, it will still ride good
@trevorhoward61156 ай бұрын
Man sounds like cornbread.. awesome video btw haha.
@ballsoutperformance6 ай бұрын
Idk who the person cornbread is.... but the food is yummy
@trevorhoward61156 ай бұрын
@@ballsoutperformance haha its just something we say here for people that sound very southern. :D
@fernandoaguilar42762 жыл бұрын
Where to get the parts to lower the Ranger from the rear
@ballsoutperformance2 жыл бұрын
I think this was just a cheap kit from ebay
@spy6271 Жыл бұрын
I lowered it and now the e brake is stuck
@ballsoutperformance Жыл бұрын
Make sure the cable isnt pinched or pulled tight somewhere
@spy6271 Жыл бұрын
It isn’t, do you think I would have to readjust it
@ballsoutperformance Жыл бұрын
@@spy6271 maybe. Thats just wierd. Ive never had to do that after a lowering job
@ashleymoore36722 жыл бұрын
What did you say you can do to fix the cambering in the front?
@ballsoutperformance2 жыл бұрын
On this model that has the twin i-beams, they make what I call an alignment bushing (or offset bushing). You essentially take the factory ones out and the new one slides back in. The best thing to do is take it to an alignment shop and have them measure it to see what size bushing you need, then they will have to install it and index them.
@dukeskookum2674 Жыл бұрын
They make adjustable ones so you don't have to pre measure. I'm looking at Moog's adjustable bushing for when I do ball joints and possibly level kit.
@ak47pro1viking3 Жыл бұрын
Or you could do drop spindles to get rid of some of the camber if your lowering a rwd
@mike650r9 ай бұрын
No drop spindles for I-beam Rangers that I know of. @@ak47pro1viking3
@AntWells6 ай бұрын
@@dukeskookum2674 where can I get the adjustable ones?
@Punstripers2 ай бұрын
I will believe anything a person says about trucks if they talk like this.
@ballsoutperformance2 ай бұрын
U a real 1 fo dat
@mangomongooses2 жыл бұрын
What was the name of the kit he used
@ballsoutperformance2 жыл бұрын
It was generic
@xat2_56 Жыл бұрын
no C-notch?
@ballsoutperformance Жыл бұрын
Owner didnt want to notch. Its a beater and he really didnt care
@michaeldupuy15192 жыл бұрын
Where could I get this kit?
@ballsoutperformance2 жыл бұрын
Owner provided it. I think it was just a cheap ebay kit. Owner didnt want to spend much in it.
@johnhammett5194 Жыл бұрын
I wish i could actually see the final result. It's too dark
@ballsoutperformance Жыл бұрын
Youll get that on these big jobs
@GetaJetta Жыл бұрын
What size tires you running now with that?
@ballsoutperformance Жыл бұрын
Im not sure. He sold it right after this, lol
@GetaJetta Жыл бұрын
@@ballsoutperformance 🤣🤣 all good man Thanks
@chadanderson73333 ай бұрын
Doo Dat!!
@Retsnomymknird Жыл бұрын
Power steering pump screaming away classic ranger
@safetydoge2 жыл бұрын
Looks great, been planning on doing this to my 97 B2300! Thanks for posting this
@ballsoutperformance2 жыл бұрын
👍 thanks for the support
@necrosbillsibub4650 Жыл бұрын
Dang ol ford ranger
@ballsoutperformance Жыл бұрын
Danger ranger
@osirisramirezmolina42085 ай бұрын
May I ask you what’s everything you bought to drop it? Kit?
@sleepyinseattle46154 ай бұрын
Good camera angles 👍
@horridaka24258 ай бұрын
Any recommendations for the parts to do ths to my 1990 ford ranger
@ballsoutperformance8 ай бұрын
I think this was a cheap ebay kit. If you want something better, DJM brand is a good value for your money.
@Json.-8 ай бұрын
And, I say that looks really 👍🏼 good
@shemariAkaTheSensei3 ай бұрын
Did you have to cut into the cab?
@ballsoutperformance3 ай бұрын
No
@tapatio14257 ай бұрын
How does the truck drive does it bottom out horribly like everybody says drop kits do?
@ballsoutperformance7 ай бұрын
No, the people that say that, dont know what theyre talking about
@Tintdaddy88 Жыл бұрын
Gotta be Louisiana
@ashtonbyrd4190 Жыл бұрын
100th like
@Allen-nh8rn11 ай бұрын
Looks nice!!!👍🏻👍🏻
@DenesGarage7 ай бұрын
What was the name of the kit yall used for this ranger! I got a 94 and I wanna do the same kit!
@ballsoutperformance7 ай бұрын
I dont think it had a name. It was a ebay special
@DenesGarage7 ай бұрын
Ok. Thanks Theo. I enjoy your video Theo it was very informative! 🤘🏻🪖
@justinsafran2485 ай бұрын
Boomhouer is that you?
@ballsoutperformance5 ай бұрын
Dagum, guilty as charged mane
@jamesbowles1863 Жыл бұрын
You sound like EVERY SINGLE KID I grew up with my entire childhood in Kentucky 😂 that’s super cool since I’m in Michigan now lol
@ballsoutperformance Жыл бұрын
Lolz. Thats funny.
@Philk1796 ай бұрын
Definitely similar. Moved over to kc mo. Miss Kentucky for sure
@phishtahko5951 Жыл бұрын
Noise 6:09
@ballsoutperformance Жыл бұрын
Lol my man was going hard with the hammer.
@ryanhill8309 Жыл бұрын
Would I need to get my front end aligned?
@ballsoutperformance Жыл бұрын
Absolutely
@AntWells6 ай бұрын
Where do you get the offset bushing from?
@ballsoutperformance6 ай бұрын
Any local part store can order them. A good alignment shop should stock them as well. Theyll need to measure your current camber and caster to determine which one you need and to install it in the correct orientation
@AntWells6 ай бұрын
Thanks!
@gongetit8 ай бұрын
Hell yea gonna do this to mine
@ballsoutperformance8 ай бұрын
💪
@WoWsoEPIC3 ай бұрын
Dang ole leaf springs
@jimmywilson1388 Жыл бұрын
Thanks for answering this question.
@spy6271 Жыл бұрын
Would I need to get new shocks ?
@ballsoutperformance Жыл бұрын
You dont have to but its best
@spy6271 Жыл бұрын
@@ballsoutperformance I have a 95 b2300(essentially a ranger) and it has the twin I beams in the front and I can’t find anything out there for it, I found a kit for the rear 5” drop and the front drop with springs, but can’t even find lowering shocks. Do you think not having lowering shocks would make it not go as low?
@ballsoutperformance Жыл бұрын
No, it just may not ride as good without them.
@spy6271 Жыл бұрын
@@ballsoutperformance thanks for the help, I can’t find anything on the rangers and Mazdas with the twin I beams in the front so this helps
@Izaacc972 жыл бұрын
What shocks and springs did you use?
@ballsoutperformance2 жыл бұрын
They were owner supplied. I think just some cheap stuff.