gel blaster mods for beginners

[@lowguidoschopshop]

tacticaledge.com.au/?ref=vlvmn0q9t4 discount code "lowguido"

[@atomthegreat541]

yo where do I go get all these internal parts though that's the problem where do I get these at cuz I can do all that right now bro after watching this video you're such a great teacher

[@earthenscience]

I do not understand what is the point of swapping the nylon for an aluminum barrel. Nylon is supposed to be low friction. Can you provide any scientific reason for using an aluminum barrel?

[@evansnash09]

@@earthenscienceI would presume it would be more accurate being as straight as it is.

[@eli_barajas]

Could you do an upgrade to the Mr. Beast gel blaster so it could shoot out steel bbs instead? I need your help with this project so I know what I need to buy for this upgrade.

[@theartofflying3108]

hi mate. what is pushing the gel balls into the barrel T-pipe? Any suction force or spring? Do those go there one by one or in some series with each piston movement inside the barrel cylinder?

[@GooseMcBruce]

"if you dont know what that means dont worry, nobody does. it's just some sort of pixie number everyone wants to be bigger" instant sub

[@lowguidoschopshop]

I'm still getting a kick out of the amount of comments I get telling me that it's feet per second.

[@thebigbadbullyt]

@@lowguidoschopshop feet per second? nah its frames per second

[@1969cmp]

Amazing difference on compression with the o-ring change. Stunning.

[@niviacuellar7879]

Npc

[@GideonRE3]

@@niviacuellar7879 bro is really comment shit on a 4 year old comment what a fuckin loser and your name is nivia💀💀💀💀💀💀🤓🤓🤓🤓

[@gii1655]

the question is where i can bought that rubber ring

[@yenfishingvlog6744]

Keep in mind, plastic gear box will not hold out for long, you're gonna break your gearbox...the max spring load is 1.2 for plastic, for nylon 1.3-1.4, and metal depend on its material, for cast iron it can take up to 1.5, but stainless steel will go up till 1.8 spring...

[@Aidheiel4107]

When you mentioned plastic gear box, do you mean the cover or the gear ? Or change the whole things (gear, cover, plunger & etc..) ?

[@johnshedIetsky]

@@Aidheiel4107 the gears, piston rack, etc. also if you have a harder spring you most likely will need to upgrade your motor and battery to be able to handle the spring pressure.

[@878SurvivorFM]

Highly recommend you do this for as many blasters as possible, should call this one the scar edition. But thank you for doing this, was great to see the difference with some simple upgrades. Would like to know things like the type of o ring, barrel length/t piece design, etc in future ones. And I bought you five coffees today already! Don’t get greedy! Lol! Keep up the good work mate!

[@ComradeJehannum]

I think he also has a V addiction.

[@benjaminastormiscomin3229]

Yeah a

[@MaDDog90]

I think you had a little bit to much fun while “testing” the plunger 😂

[@123-l2n2j]

Loose as a goose

[@swiftyllamaboi8435]

Thought the same thing😂💀

[@marvinlacuintv7042]

@@swiftyllamaboi8435 LOL 😆🤞

[@marvinlacuintv7042]

😑👏😆😂

[@The_Mythical_Potato]

penatration ( ͡° ͜ʖ ͡°)

[@bmxgeneral]

This looks suspiciously like an airsoft.. Is the gel thing the only legal way of playing Down Under?

[@genpit6492]

Sebastian Fick yea basically

[@ozgelsoft75]

@@alexandert5960 why not at least your not from my neck of the woods VIC. The laws here are fuckn ouss weak. pretty much if it's mad fun or entertaining.......then we're making it illegal. Coz no one's allowed to have fun here lol.... But it I still got my hands on a couple of jinmings finest lol

[@ZedEff420]

no, you can cheekily get airsoft guns too aus, i have a few from low price/fps to high grade/high fps.. and once you have them upgrade parts are a piece of piss to order hey.. qulity BB's i find are not so easy to find but there are good ones available if you use same process mentioned below (25bucks for 2000pcs 0.20gm-0.25gm-0.28gm 6mm hard bbs is what i use and search for) just have to know where and how to do so.. i use ebay by finding what pistols/AR's i want google it look for ebay link, then if it ships worldwide and doesnt come up with BS biosecurity warning.. i order it. but can only get a few styles/brands from Korea and japan (japan has best brand IMO which is Tokyo Marui super affordable and high quality m8) ALSO on when on payment screen where you can add a message to seller b4 ordering ask for the CUSTOMS ITEM DESCRIPTION TO BE TOY AND TOY ONLY... most sellers kindly oblige you didnt hear this from me _cough couch wink wink_ good luck if you try bud (start with cheaper stuff 1st so you dont lose out hey)

[@SEEYAIAYE]

Airsoft is a joke here, they recently made it legal in SA yet the only vendor is some dodgy cunt at the Adelaide brickworks who sells shitty nerfed down pistols for $200 that are sold for $20 in Europe and the USA. the requirements for Airsoft are so shit it's not even worth the bother, same with paintballing. Can't use legally outside of an official course and can't even buy your own ammo, no wonder gel blasters are getting popular.

[@shadowrunner03]

@Mystery Bag pnly 2 states gelblasters are legal in are QLD and SA, every other state has lumped them in with airsoft/paintball and banned them, tassie classes them as actual military guns lol

[@shumhenry5922]

i think cylider volume is also a important factor contribute to a better blaster. For example, i just made my own gorkey mp5 a week before. At the beginning, i used the full-volume cylider that j8 gearbox comes with. I shot it with hop up attatched at 7m and the circle of the gel landed was approxiamtely 20cm(h) by 15cm(w). Then i switched to 75% and cut few teeth of the that compression thingy (sry i donno what its called) to make it like 60% of the original volume. After that, danm the spread was way much better and it definitely went to below 10cm by 10cm at 7m

[@lowguidoschopshop]

That sort of thing is a bit beyond beginners mods.

[@jamicanbacon3890]

This was the very first video that got me on my gel blaster upgrading journey, thank you Low Guido, from the bottom of my heart, thank you man.

[@weswilcox4655]

the Balistic fps is directly related to the velocity of the ball. the lighter the ball for a given fps the less distance it will travel and the less impact for any given distance.

[@deemstattooph4392]

Putting 11.1volts battery will make the nylon gears wear off. 7.4volts is good for nylon gears and for the stock spring. If you want 11.1volts battery to fit in better upgrade the nylon gears to metal gears including the cylinder.

[@lowguidoschopshop]

I don't know where you Magical Pixies came from, but I sure like your pixie juice!

[@FlyingDropBearAU]

Probably watches AvE on here. Pretty skookum channel :P

[@lowguidoschopshop]

@@FlyingDropBearAU haven't you noticed all my AvE references?

[@35millitia40]

You get a sub just for being an AvE fan. Also your coffee is getting cold.

[@shortyvids99]

yo mr chop shop, can you unboxing the gel blaster M4 Storm plesae, maybe you can give guide to upgrade too

[@harryboy1234-god]

The number is .....FPS feet per second

[@aarontruitt]

I know nothing about toy guns, but this was really interesting to watch! Glad I searched you, this is really cool!

[@lowguidoschopshop]

I'm so glad you stopped by.

[@natecataldo1136]

You should try putting a v3 airsoft gearbox in there and swap the cylinder, cylinder head, tappet plate, and nozzle. That way you at least have metal internals. Looks like the gearbox in there is exactly v3.

[@MrJtagSupport]

You’ll probably be able to legally import the parts though he’s not talking the whole gun

[@liverous]

nope

[@EJDRIFTZ]

Agreed stick a d boys v3 gearbox in it with a high torque motor and a set of 16:1 gears you’d be laughing

[@discojockeys]

14:20 is that 2 bottles of NOS on the floor? 😂 thanks for the guide mate, awesome stuff!

[@wezcandish5603]

Great basic guide. Subbed immediately. Thanks bud, this is exactly what I needed to know, awesome work.

[@williamweng6419]

Low Guido. Could you please make a short video showing how the safety switch should be sitting please. Both my scar and m4 have switches that dont work after taking them apart to upgrade. Thank You

[@triniboybobb2332]

Hello mate i want to buy my first gel ball blaster what do you recken will be the best store in australia to buy one

[@jenzzoi]

How do you solve the overheating motors and battery.

[@douglikins2326]

Just wanted to thank you for all the wonderful information and training I'm just getting into the gel stuff now I'm an old fat guy and love doing stuff with the grandkids this is much better than Nerf guns

[@E85_STI]

I want to quiet my M4 gel blaster I bought it off Amazon and it’s listed as upgraded gear box, spring and 11.1v battery it comes that way but the piston when it rebounds is loud I have to wear ear pro just because it gets loud after shooting a while. Is there a buffer spring damper?

[@fajar3101]

Thank you for your crystal clear explanation. Following your directions step to step is really working and really nice.

[@pugestpug5879]

10:46 why do I think you enjoyed that to much

[@AndersenHirscht-ix7ym]

Woah! I will definitely be using some of these upgrades. Have you done a pistol version of this video?

[@joshuamcc8612]

I’ve heard that upgrading to an 11V battery will blow the gears on some guns, is this the case or is that just what they say to get you to upgrade both?

[@lowguidoschopshop]

Gen8 will run 11v all day every day

[@1969cmp]

Some gears can handle the bigger battery and other gear boxes don't like the 11.1v battery. I was watching I don't know who, Novice Driver or Low Guido..., were testing a unit (unsure which one) and talking about a blaster that needed a gear box upgrade if the more powerful battery was going to be installed. If I remember which one Ill try and find this festure and let you know.

[@lowguidoschopshop]

@@1969cmp some gears are faulty and can't even handle stock power.

[@sneakyguy4444]

Only crap plastic or massively overpowered springs battery etc

[@1969cmp]

@@lowguidoschopshop ...oh dear...which ones are they and I'll avoid them and pass it onto the group Im trying to build. Thanks.

[@shaneroser6235]

I would just like to say form a nube perspective I loved your vid . An that green O-ring is from the AC O-RING kit you can buy from REPCO

[@timjohnun4297]

What size is it please? I might just go down there and get one

[@convez]

where can i find a aluminum barrel for 3/8” that will fit in my SRB800?

[@f.cscootriders]

great video and very informative. if like to know where you buy your upgrade parts from so cheap. the sites I've looked at the barrel alone is 25 bucks. also is this the same scar as the army green one.

[@gorthaur83]

I am noob for airsoft and gelblasters. ı am checking the these for 2 months, most of all coming with 7-8 volt batteries. did not 11volt battery break the circuit of the gun?

[@A.D.D.O.C.D.T]

The number is followed by FPS ,feet per second. Eg. 163 feet per second is the speed the round travels. The higher the number the harder it leaves the barrel and the longer it will fly.

[@lowguidoschopshop]

it still makes my day... every time.

[@NotPofkp]

woosh

[@larryb95]

I just ordered one...different style. Where can I find these upgrades to order? Spring..barrel..onring?

[@protha1]

Can you please say the power of spring that you put inside ? M100 or higher ?

[@amsterdamrico]

I have a Aliexpress M416 2 models small one with 3.7v batt and a slite bigger model with 7.4v batt how do i know wich upgradeable parts i can get for these guns? Are they all the same inside? I dont know what parts lie inside these models do you know maybe i can send you the links of the blasters if you want? Just started with my little son with this hobby. Would love the helping advice

[@AlanWanTV]

My gel blaster is M4 punisher v1 got any recommend for modify this model ?

[@MushToast_]

That O-ring test trick is great!

[@burn1gotbeats]

Subscribed I learned a lot watching this video great work I haft to watch more of your content.

[@AUS-q5f]

the ACR J10 shoots the same stock as the scar does upgraded, so instead of buying the Scar you could buy an ACR, and all you gotta do is a spring and o ring and your good to go (and 11v battery)

[@schnobe4909]

Can you do a vid on how to change the spring easily on the scar through like the buttstock

[@kirkrostock1971]

where dd most of the power come from in the upgrade? Was it spring or O ring?

[@lowguidoschopshop]

the spring adds most power.

[@germanlee7718]

Could anyone advise, I made just a spring upgrade, as the easiest one (not on SCAR, but G306T (black) with a spare spring came with the blaster). Sometime after that it just stopped firing, I hear a click in any mode (single-auto), but nothing happens. Tried different batteries. Not sure where to check when I try disassembling it again. Could that be motor is burnt? Or anything else.

[@RobertGarcia-qk1gl]

Where can i buy the aluminium barrel & what is the specific lenght & bore? Thank u

[@arthurgarcia4389]

What makes a gun shoot slow? I upgraded the battery already and still shoots sooooo slow. Is it the motor or spring?

[@endlesswarable]

What's the difference between equal and unequal spring when it comes to fps of blaster?

[@lowguidoschopshop]

@@endlesswarable the unequal springs generally have a softer section and a harder section so the initial take up is soft and then it gets hard. I think it is supposed to be easier on the gearbox. But as far as FPS goes it all depends on the spring. Technically an equal m100 should be the same FPS as an unequal m100.

[@donathan5932]

Any cheap alternative to this gun I can get right now? I have a cheap gel blaster pistol but it only takes a 3 pin connection so biggest battery I can get is 7.2v which doesn’t help much

[@mrsnippay7637]

I added an 11.1v battery in mine and it doesn’t shoot fast what am I doing wrong?

[@yungej9992]

I'm trying to see if you can put a srb400 motor set up in a m416 gel blaster

[@1969cmp]

Are the alloy barrels smoother and thus have less drag?

[@takoshihitsamaru4675]

I 'have' learnt a lot. Now I know how much more painful everyone else's blasters are going to hit me during my first game.

[@aarondrager82]

My first ATTEMPT at mods was ... Heavy Spring, barrel & Oring with no battery and SHRECKD the tappet ,should have gone the battery first?

[@Zeltroix]

The semi fire selector doesn't work on mine, only full auto, is that normal?

[@lowguidoschopshop]

that is normal. it is auto or nothing.

[@triggerman4145]

CAN U PLEASE POST THE LIST OF THE SPECS FOR TG SCAR L I HAVE THE SAME UNIT AND I WANT TO UPGRADE BUT I DONT KNOW THE SIZES.. THANK YOU

[@chronicleimpactchannel1623]

Hey ther .. Just wan to ask about the moto and the spring...can i change the moto with 31k rpm but still use the nylon gear,and how long the spring ?

[@rickbell1527]

Hi mate great videos. Can I ask you which blaster in your opinion should I upgrade,I have a ak47j11 gen8 cyma m4 what ya reckon cheers and a blg m16.

[@llgodzilla9480]

Bought a j10 for 220 and bought a 11.1v and its great just like that. Just gonna get a hop up spring and o rings for now then in goes metal parts. Straight out of the box its at 240fps

[@SERipper]

Hey man thank you for the tutorial, I have one question, what size is the new O ring that u installed.

[@kinqk1924]

Where you get the feather and the alu run from

[@mldadzgaming3938]

I loved how the plunger was getting forced balls deep into the cylinder. My favourite part by far

[@troyd-motorsport9933]

Thanks for the video! Does upgrading the spring reduce the rate of fire much?

[@patrickruttimann2354]

ok as an airsoft player there are so many upgrades i would recomend to you like the gears get some steel ones will last longer and give better performance go for shs get a dual sector gear for eve higher rate of fire put an aimtop F430 motor in get a steel piston in there or lunger how you call it and oh get a steel or cnc made aluminum gearbox and put a mosfet in there to prevent gearjams also increas the performance plus shim them and they will be less noisy

[@amsterdamrico]

Are these springs the same model or dimensions for all gel blasters?

[@greghoneywell9542]

pretty much took it and made it into paintball velocity. the shells are only gelatin based. but do you get better range out of these mods. paintball is generally 150 ft. 46 m according to google. but thats even if ot breaks.

[@akgelblaster]

Much appreciated and i learn a lot from your channel, thanks!

[@StolsenSmallEngineRepair]

Can most gel gun motors that come with a 7.4v battery handle a 11.1v battery, or will that fry the motor?

[@lowguidoschopshop]

almost every one can take 11.1v. I have literally thrown out all my 7.4V batteries because there are only the odd one or two that don't run 11v

[@JuvyWata]

With nylon gears 11 volt wont break?​@@lowguidoschopshop

[@lowguidoschopshop]

​@@JuvyWata the voltage does t break gears, its the spring. Stiff spring will break gears. Every performance enhancement will have a reliability decrease. But I have been running these blasters on 11V for years now and they go good.

[@DuckDTD]

Do you now if there is a certain way around when putting the spring in?

[@Auz4life]

How do you modify a gel blaster surge?

[@jasonyannuccelli2499]

Great video mate. I’m a newbie with this and just looking for my first blaster. This has been a very informative video and I’m truely amazed at the gains to be had for such little cost. Is this the model I should go for for a first blaster or is there a better one available that can still be modded like this. ? Cheers

[@lowguidoschopshop]

the gen8 is a great starting point, and in my opinion has many advantages over gen9 the M4A1 onr the SCAR V2 are great starters blasters

[@communistbassist2015]

what can i charge the batteries with a usb port when i dont have an actual charger for these lithium or lipo batts? like apple adaptors?

[@lowguidoschopshop]

Yup. Or a computer. Or anything with USB

[@communistbassist2015]

@@lowguidoschopshop im getting an M4 K300 please do a video on that

[@Just_aV6]

Could you show this but for the SRG 400?

[@classics967]

Tx. The link to springs have multiple options . Which did you order?

[@lowguidoschopshop]

M90

[@lowguidoschopshop]

or m95

[@lanang3418]

Hello sir, how about raising the voltage? Does it do any effect?

[@lowguidoschopshop]

@@lanang3418 yes. It increases the fire rate. That is why I changed the battery.

[@AlmuntasserMohd]

can nylon gears handle 11 volts? or will that only make it wear down faster?

[@lowguidoschopshop]

it will certainly make them wear out faster, but these gears lasted a good year of hard use before they died.

[@AlmuntasserMohd]

@@lowguidoschopshop i see. then i guess its a good upgrade, and just change the gears to metal when they do actually break.

[@MrBunitj]

What sort of oil was that on the o-ring 11:30

[@lowguidoschopshop]

I don't know exactly what the oil is. Its a specific blaster oil.

[@Mick_Jackson]

Its pussy juice mate

[@bradleyswinbanks7957]

Where do you buy the upgrades from?

[@ABisdakAbroad]

mate.. can you do video like this on a acr j10?? would love to upgrade my gun but do dont know how to.

[@Exlomm]

I actually started to mod my gel blaster a long time ago and now it really hurts unlike last time its doing like 600/700

[@NathanThiessen1996]

Any chance of a tutorial video on installing the wells handguard adaptor and wells buffer tube adaptor? Mine will be arriving soon but there is nothing in the net about either

[@triggerman4145]

what is the name of the upgraded spring again?

[@abdulrahmanreciteation]

Can you put grease on your blaster or is it bad

[@privateuploads5397]

Does battery help boost the FPS? I know spring does but battery wise?

[@lowguidoschopshop]

@@privateuploads5397 battery increases rate of fire, but also allows you to use a bigger spring which increases FPS. So the battery itself doesn't make a difference to fps. But its a supporting mod.

[@mer-oneralphjr.bolinto6515]

I have a Sijun m4. I want to change my rail system to free float. What do I need?

[@knight9235]

how do you first open a blaster im having so much trouble trying to get the screws to come out with hand tools

[@lowguidoschopshop]

You need a good slim #1 Phillips head

[@driftbunny3474]

would this scar benefit more from just putting the bruisemaster barrel from your other bruisemnaster video p2. or is this aluminium barrel just the standard.

[@lowguidoschopshop]

I have found the bruisemaster barrels perform best when you already have 300+fps

[@driftbunny3474]

​@@lowguidoschopshop thanks for the quick response, In the bruisemaster vid, you said that any gen9-gen8 capable of 300+ fps out of the box will benefit with a bruisemaster/o-ring/11 volt battery upgrade. I really like the gun u used in the video, i was originally gonna get a scar v2, but the gun you used looked cool with the rail system. i was wanting to get a ar15/m4 looking or mk18 version that is gen9, and 300fps out of the box. would you know where to get a decent one?

[@francosantelli4102]

Che differenza di prestazioni tra il Ball Blaster e il 6 mm softair classico?

[@Twist2210]

Hey guido will an m4a1 gen 8 take an 11.1 battery without it being too much to handle?

[@Chase.moto13]

Hey dude, your videos are super helpful! I have a few questions for you, do you think these blasters would be capable of spitting a 6mm airsort bb? I did hear from a friend of mine that I would need to convert the barrel from a 8 to 6mm, but what about the running gear and plunger would that need to be upgraded to alloy or some type of metal to be able to withstand the impact and force of a airsoft bb? I'm from New Zealand and having a hard time trying to find mods for a mp5k is there a place you could recommend I buy from? Thanks again for the videos mate

[@cod_clips4381]

We’re did you get the metal barrel?

[@Veazy01]

Can I use any 11.1 v battery for it. Or does it have to be a certain one??

[@then00binator12]

Just a question in general, wouldn't smaller length barrel blasters work better with range simply because it reduces barrel drag, slowing down the gel balls themselves? Just ordered my first blaster, the AKS-74u. Gonna do some testing & some modding, keeping the stock firing rate not wear the insides & not waste gel balls.

[@lowguidoschopshop]

No. It doesnt really work like that.

[@then00binator12]

@@lowguidoschopshop Ah okies, thanks.

[@tjosa7786]

wouldn't too much power just blow up the water bead as it is coming out of the barrel?

[@lowguidoschopshop]

You need to use the higher quality gel ball. They are very hard.

[@tobywynn9616]

Can these shoot bbs? If so I'd totally buy one

[@lowguidoschopshop]

Nope

[@NotPofkp]

Nah.

[@Steve211Ucdhihifvshi]

Why change the barrell? Nylon or acyrlic should have far less friction than stainless. I just bought some vector gun thing, seems good out of the box. I think fundamentally the design is just bad inside. Ive had airrifles, bb guns etc etc before and i think the best mod would be to turn it into an air rifle.

[@naroco9147]

Is it ok to put 1.4 instead 1.3 spring ? Please answer it. Thank you.

[@lowguidoschopshop]

You would probably break it fairly quickly with 1.4

[@Valium_x]

I found 7.4v won't push a 1.3mm spring with a standard gen9 motor..is this consistent with other people's experiences?

[@lowguidoschopshop]

Yeah you start to push the limits of the standard battery with 1.3 or bigger.. especially if you sre using one of those crap black/silver chequered ones.

[@channelwatpetu8967]

mine 7.4 work well with the 1.3spring..

[@jkpisces]

would you recommend xt30, xt60 or deans for battery ?

[@eliezergunawan]

i'm doing mods to my M4 TERMINATOR, i'm replacing the battery compartment from the an-peq 15 to the buffertube

[@eliezergunawan]

is the Jinming's Scar T-piece compatible with the Jinming's M4 Terminator?

[@lowguidoschopshop]

I think it might be.

[@eliezergunawan]

@@lowguidoschopshop thanks, u helped me A LOT :) thank you so much

[@paulsmith5490]

Can you give details of where you got the gun, new spring, barrel etc please.

[@themagicphoneboothq4529]

Paul Smith you can get most of it off of eBay or AliExpress

[@Zandaia]

Subscribed 👍 question tho, why do my blaster fires more than a round, like burst fires just with a tap on the trigger?

[@lowguidoschopshop]

A lot of blasters are just like that. Unless the motor has active braking it can still continue to turn after you release the trigger. Especially if you have a fast motor or higher voltage battery

[@travisvandermerwe1358]

Hey Mate, where did you get these parts?

[@jacobwhite6077]

What does the aluminum barrel do