rust runs on EVERYTHING (no operating system, just Rust)

[@LowLevelTV]

wanna get good at programming? check out lowlevel.academy and use code THREADS20 for 20% off lifetime access. or dont. im not a cop

[@SportSync_official]

Please do another tutorial on this stuff. It's really interesting.

[@kkgt6591]

Can you please Zoom in on the code. It's not readable on mobile screen.

[@orangehatmusic225]

100% disagree with your opening statement. The Rasberry pi is now impossible to buy. What should cost $50 is now selling for $190. All of you illegal rom downloading boi's who wanted emulation jacked up the prices. Way to go pirate. Way to ruin it for everyone else.

[@kennethbeal]

@@orangehatmusic225 Lockdowns had *nothing* to do with it? Seems a little short-sighted there; chips of all types were affected, including the car my dad wanted to buy. Pirates STEAL ITEMS. Like Assange recently said, he didn't steal anything; he made a copy. Verbs matter. Ever hear "Possession is nine tenths of the law"? When people copy software, the original possessor does not lose their possession. It's more like lighting a candle from another candle. Separately, the esp32 is like $5, a 240x240 color screen is another $5, and PictoBlox is like MIT's Scratch, for the smaller devices. Or the Orange Pi, for $117. So: I 100% disagree with your 100% disagreement. :)

[@UltimatePerfection]

Rust really runs on everything, even on my local iron river bridge!

[@rorybninetythree]

I knew literally nothing about embedded systems and barely anything about Rust 18 minutes ago, and now it feels like it's a very acheivable thing to learn thanks to this demonstration. You're clearly a gifted teacher, fantastic video.

[@LowLevelTV]

Welcome aboard!

[@chillbro2275]

@@LowLevelTV no pun intended :D haha

[@niaei]

Now you can update your resume. :)

[@ben_sch]

Same here. I have a background in web dev, but allost everything was new to me here. Yet, I‘ve understood pretty much everything and learned a ton. But honestly speaking, I will probably never learn this type of low-level programming. Just seems way too much effort to get something done when there are easier albeit less efficient tools/languages to use. Nice to be able to peek into this world though

[@enricofischer1330]

​@@LowLevelTV how do I compile for the 64bit version (aarch64) objcopy does not work and i could not find my Problem. (I put AARCH64 in the linker script instead of ARM.eabi)

[@atdit]

The great thing about your videos is the pace and "constant" narration. It feels like there isn't a single second in the video where you're not explaining what you're currently doing. That makes it very easy to not lose focus and attention as a viewer

[@LowLevelTV]

Wow, thanks!

[@matzeb.ausv.1380]

very true

[@kylarosborne698]

@@LowLevelTV I agree. You really talk about every detail which is so important. The viewer has no questions, and you make no assumptions about what the viewer knows. I hope to watch more like this in the future :D

[@jnth2]

Really like that you use documentation as a reference to explain. Lots of tutorials skip the fact that documentation is there to help.

[@kennethbeal]

It's awesome that he does that, agreed! Just a few videos of this nature and we're downloading helicopter flight manuals between words of dialogue! :) (Matrix reference; as we age, our references get stale, like moldy bread one can use to cure disease or have interesting visions with.)

[@saeidakbari6303]

The amount of effort on this video to make it only 18 min is insane if you are a bit familiar with embedded system, thanks for it LLL

[@LowLevelTV]

Much appreciated!

[@Dygear]

Thanks!

[@LowLevelTV]

MARK! My guy. Thank you so much for this generous Super Thanks. I hope this video helped you in your embedded development journey.

[@dbznt]

Thanks for Everything you do LLL, Seriously your videos have invigorated my spirit and inspired me to learn more about computer systems and lower level langs. C and Go are becoming my favorite languages to write my code. I'm gonna try writing some rust today!. Thanks again! Keep up the great work!

[@LowLevelTV]

Wow, thank you! I'm so happy to hear the videos inspire you :)

[@BR-lx7py]

@@LowLevelTV Haha, that's interesting because my takeaway was that low level programming is so different that I know less about it than I thought :). I could probably follow along, but I'm SOL the second something goes wrong.

[@odanabunaga2505]

as a recovering TS dev I'm watching this in complete awe! Thanks for explaining what you're doing, it leaves me with hope ;)

[@MrEgol]

Grazie.

[@megumin4625]

13:39 I would hope nobody would be mad. Unsafe code is basically the only way this can be done. It's just a fact. There's a reason rust has the unsafe keyword, because it's sometimes needed. :) Also, thanks for the video. It's very enlightening!

[@devrim-oguz]

It is just same as writing C inside rust with more wording of course.

[@TheSast]

​@@devrim-oguz unsafe rust is not C

[@Gramini]

Could probably be abstracted into a safe interface (or however it's called). Like a struct (with the PIN number) with methods or even plain functions (one for turning a hard-coded PIN on and the other for turning it off). But in the end the unsafe has be be somewhere.

[@tsclly2377]

Safe code is slower code, as there has to be a lot of hash inserts and checks and when you are processing movement, electrical spikes and wave forms, a lot of interrupts that are happening in the higher kilohertz range, such as signal processing, your program isn't gong to be looking at the web directly and should reject anything unexpected.

[@TheSast]

@@tsclly2377 safe code is not slower than unsafe code

[@TheBendixSA]

So glad I found this channel, I have been writing code for a long time and wanted to jump into some low level stuff to improve my wider understanding esp. embedded systems etc. You cover fundamentals so well and easily digestible. Thanks for this!

[@Bluesourboy]

Absolutely killing it with how you're presenting. I'm not really a fan of Rust but I couldn't stop watching.

[@appelnonsurtaxe]

I really like how you explain not only how to do things, but how to look for things yourself (e.g. the broadcom datasheet or the rpi firmware). I already have a bit of experience in embedded programming but I'm sure this helps beginners a lot. And more importantly, it makes the whole field feel less magic and scary than just saying "this address controls this LED because I know it".

[@nicholasfrillman42]

I am absolutely watching your channel from now on.This is the most I have ever learned from a programming video. I've been trying to learn how to be a low level developer for years. Since high school. WOW. It's quick. It's on point. And I can follow it. I love how you just filled in several gaps learning in only a few minutes. I could have stayed in college, and I am not knocking anyone who does, but I have a short attention span. Thanks for this. Don't even remember how I stumbled here.

[@SandhanSarma]

Fantastic video, very very informative. Hope to see more content on RUST for embedded systems from Low Level Learning

[@LowLevelTV]

More to come!

[@otm3107]

With all the soft soft tutorials that exist on YT, yours just created that "light bulb illumination" mont in my head. Thanks for taking the

[@reo101]

You can make a `build.rs` file like this ```rust fn main() { println!("cargo:rerun-if-changed=./linker.ld"); } ``` to hint to cargo that a change in that file should also result in a rebuild

[@byronhambly]

Great suggestion, I think you also need to set that build script in the Cargo.toml mainfest of your crate

[@TimothyChapman]

You should configure the internal timers to trigger an interrupt every millisecond to increment a counter. Then reference that counter to to get more precise timing on when the LEDs turn on and off.

[@JimTheScientist]

osdev mindset

[@VisualEhrmanntraut]

The panic handler function is for Rust panics. Not hardware faults. And #[panic_handler] is not called an option, it's called an attribute.

[@marcuskissinger3842]

Calm down buddy

[@VisualEhrmanntraut]

@@marcuskissinger3842 Not sure where the impression I wasn't calm when writing that came from, I just have a neutral tone.

[@marcuskissinger3842]

@@VisualEhrmanntraut yeah but just relax

[@klebleonard]

This is reallz interesting. What are your plans on next courses for your platform? Will the current mini course get updates and more content?

[@LowLevelTV]

Current mini course will probably stay in its current state while I work on the full AVR course. Thanks for watching!

[@casperes0912]

I started working on an operating system in rust. I never went that far with it but it works. Can boot both legacy bios mode and modern efi style. Though only in qemu on efi. Don’t have video output properly working on any real efi hardware I have. But with bios boot it works with a text mode console. Boots into long mode and all but no memory protection

[@Nitiiii11]

Thanks man, it took some adjustments to make it run in u-boot on a cortex-a9, but I figured it out eventually. Very helpful tutorial.

[@AnWe79]

Cool, I like it! I don't know any Rust, so this was a good guide on how building Rust for bare metal works. For those who want to go further; If you want to be remotely efficient, you'd use a timer interrupt instead of the nop loops. Then you leave the timer to do it's thing, and whenever the time you've chosen happens, it will call your interrupt routine, which toggles the bit. Then you can do something else in between, instead of wasting cycles in a nop loop. That is, you can do simple round-robin multitasking etc using just interrupt routines and timers. Doesn't matter for just blinking an LED of course, but interrupts are key to do more complex things on bare metal.

[@rhamses]

I just found the channel and I loved the video. One thing that it makes me thing was: if is it possible to build a kernel with Rust, then running appa on top of it would be possible too. The possibilities to embed are endless

[@ElZero010]

this is incredible, thanks for sharing this knowledge

[@DaveB-w2i]

This was really interesting. It would be great to see 2 things: 1) A list of references of sources you read to understand each part of this problem including the tools to generate the image that was capable of being loaded into the PI. i.e. a learning path. 2) An approach where you halted the processor putting it into a low power mode until the hardware timer triggered an interrupt allowing you to advance the state of the LED. The spinning for a delay makes this a bad start outside of proving that something could be done.

[@wulfy23]

thankyou. someone who shows the meat of a topic, no fluff and just the right amount of fat. great contribution. cheers.

[@Brando56894]

I just started watching your videos yesterday and in every one you've had full facial hair, the beanie and glasses. Then this one autoplays and I'm like "wait...is this the same guy?" you look so different without all of those "modifiers" haha

[@34tttttaa]

Such high quality content, thank you! Hoping in the future you can find the time to create a whole course on embedded Rust, I'd sign up in a heartbeat.

[@tadmikowsky7520]

Excellent vid man. Been a while since I've done any embedded programming. Very cool seeing how to do this low-level stuff on a pi 😎👍

[@devrim-oguz]

The CPU must be running very slow for us to see that LED blink that slowly. 50000 nop operations is nothing for a modern CPU, and we shouldn’t be able to see the LED normally if it ran at the full speed.

[@SqueakyNeb]

Yeah that should be flashing at like 10KHz or thereabouts. ???

[@yasirrakhurrafat1142]

​@@SqueakyNeb even arduino.. the processor is running at more than 10MHZ ! I guess utilising all the hardware and allocating cores and instructions sets to execute programs must be no easy job ig. Although having even remotely close to raw access to a processor's capabilities and being able to control all the io and all interfaces like a boss.. is fascinating! Might just become true thanks to the people who developed tools to flash sd cards or rpi with such a powerful.. self made os.

[@mrrolandlawrence]

Wow seeing arm assembler at the end there really took me back to my assembler days of programming the first acorn risc machines…

[@herbertwestiron]

Great video but can you please increase the font size of visual studio code? It's hard to read code. Thanks.

[@LowLevelTV]

Yeah I'm sorry I realized this after I uploaded. I edit on a 4K monitor, didn't realize it was so small on YT.

[@justinlee8328]

the absolute best programming video I've seen in years

[@sc0or]

Nice. Finally no more annoying unavoidable Linux boot log messages in a console. Just a pure code and an awesome blinking ;)

[@baileytownsend1341]

Me as a web developer trying to learn more low level programming during most of this, "Funny words magic man." But really great video, and has helped me a ton.

[@greasedweasel8087]

7:23 you can also add an `include = [“linker script”]` section to the Cargo.toml file. I can’t remember if it’s in [workspace] or [profile] though

[@nicholasbicholas]

Thanks for such a great introduction! My one question is just about the naming? Is _start convention or arbitrary? Should the entrypoint always be prefixed by an underscore? Is the name main forbidden?

[@LowLevelTV]

_start is the Linux convention for the entry point to a binary. Not a requirement to call it that, although some compilers expect it

[@wickeddubz]

Never in my life i haven’t seen so unexpected transition, “let’s blink LED with your own kernel”

[@rVnikov]

Superb quality by all means. Instant subscribe without a moment of hesitation.

[@becelli]

Hey! Awesome video. As a viewer, I'd like to suggest increasing the font size (zooming the UI) to be clearer to read in small screens. Furthermore, as a concept in video making, it's better to avoid non-flat color elements like your transparent/medium opacity terminal. The video encoder has to sacrifice quality in texts (code) to embrace all details on screen (the diverse details in your wallpaper)

[@LowLevelTV]

I realized after I rendered and uploaded that the font quality wasn't great :(. I'm transitioning my videos to 4K in the future to avoid this. Thanks for watching!

[@AbelShields]

Actually, if its static then it doesn't detract any quality at all - Tom Scott did a great video about video quality, bit rate, and moving vs stationary details.

[@Aurora12488]

​@@AbelShields Agreed, translucency is perfectly fine when static, which in this case 99.999% of the time it is; potentially even more 9s when considering the video is 60fps and the proportion of the screen that updates is quite small. The encoder/decoder will *absolutely not choke* on this sort of content. To the video encoder, there is no difference here between a terminal with a translucent background, and a terminal with an opaque, washed out background image. Translucency only matters due to the complexity of attempting to compress something that is changing in extremely unpredictable ways, which translucent objects overlapping and moving on top of a moving background tend to cause. I really like the flair the translucent terminal gives; please don't change it​ @Low Level Learning ! Though of course, please go to 4K to make the text nice and crisp :)

[@becelli]

You were right guys. I forgot about it. Thanks for the correction!

[@minirop]

I don't do rust, but still super useful information. I just got a pico W to do bare metal programming (and learning "properly" ARM assembly at the same time). next step is using a hardware timer instead of a loop?

[@LowLevelTV]

Hardware timer/interrupt would be a good alternative way to do this. Good luck with your Pico W! I'm still waiting on mine :(

[@zach9940]

Using `global_asm` to change the link section of a function is not supported (since top-level items may be reordered arbitrarily, so it might not apply to what you want it to. The intended way to change the section a function is in is with the link_section attribute, e.g. #[link_section = ".text._start"] pub extern "C" fn _start() { loop {} }

[@procyonq]

Thanks for the fantastic tutorial! Could you show a good example of controlling GPIO without "unsafe"?

[@jovianarsenic6893]

I don’t think you can, since you’re writing to uninitialised memory addresses, a massive safe rust nono

[@edgeeffect]

@@jovianarsenic6893 I'm pretty sure they do it in a safe way in some of the STM32 crates.... but I could be mistaken.

[@Grstearns]

While not totally unsafe, but definitely more safe, you should wrap only the unsafe parts of the code. Have small subroutines that are entirely unsafe and call them from safe code. Pin-enable, pin-on, and pin-off (maybe the no-op if that requires unsafe as well) should all be their own functions that get called by the main loop which would realistically also be calling some kind of computational code that you definitely want to be checked

[@rory_o]

I was wondering this myself. There must be a way without using unsafe blocks. I know they’re trying to use rust in the Linux kernel, and kernel device work is almost all about writing bits to raw pointers. Surely rust in the kernel isn’t just all unsafe blocks.

[@DocWilco]

​@@Grstearns this is exactly how you're supposed to do unsafe code. Make it as small as possible so that it's easy to read and verify (by humans) that it does only the thing it's supposed to do.

[@jorgezuniga3956]

I wish RPi 4s were $35 once again...

[@LowLevelTV]

Same :(

[@hichaeretaqua]

Can you increase the font size in vscode? Its pretty hard to read. The font size in the terminal is very good

[@janekschleicher9661]

Not a rust guy here, just older guy who used to do Turbo Pascal with Inline Assembler 30 years ago. Anyway, I wonder which constructs stops modern compiler, e.g. from optimizing away the nops?! Is anything inside asm never optimized (would be reasonable), or anything inside unsafe, or is it that Raspberry PI CPU don't make such optimiziations, or is because we never called an optimiziation pendant like the -O3? Maybe the question is dumb, but I'm so used to just add a MOV AX, 50_000 // not sure what's the 32/64 bit accumulator register pendant for Raspberry PI WAIT_LOOP: NOP DEC AX JNZ WAIT_LOOP so just doing the loop inside assembler on your own, where I might be concerned that a for _ in range(50_000) { asm("nop") } might be really optimized away by a compiler/LLVM?! Also, I noticed the generated loop in the assembler is a bit longer than my intuitive expectation. Is it because it doesn't use a register for the counter, or what did I miss here? Is it again because optimizations are not active?! I thought rust is good at detecting when to use registers is possible (it can't only be FORTRAN that gets it right, is it). Of course, as we are waiting here anyway, it's purely academic, but just trying to understand modern embedded systems with old fashioned half knowledge :-) A bit similar would be the question what stops the compiler from rearranging the lines. It's clear, that the lines with the volatile addresses can't be rearranged, but not so clear why the for waiting loop might not be rearranged as they don't touch the volatiles and also semantically don't do anything. Is it just me who don't understand optimizations or is it again because they are deactivated (with which instruction - there is no explicit release semantic visible like you would add in C)?! Anyway, great video, makes appetite to try it out on my own - still have to buy a Raspberry :-)

[@matheusbona_]

Amazing content! Congrats dude!

[@marcovitale8808]

Amazing content, thank you!

[@LowLevelTV]

My pleasure!

[@bitsnbytes7514]

Hohoho... there are so many things I like about this video. If this is anything to go by, I'm gonna make time and binge watch tf out of this channel.

[@LowLevelTV]

Welcome!

[@djupstaten2328]

Calling it: NASA will soon use Rust exclusively.

[@himanipku22]

Fantastic video! Really wish they covered this in my software engineering degree. No time to learn like the present!

[@michaelthompson7217]

>write a kernel to blink an LED annd there goes all of the respect: either you’re overselling whatever program you’re going to write as a ‘kernel’ or you don’t really know what you’re talking about

[@joetkeshub]

Great tuto! Thank you! You just earned a new satisfied subscriber ;)

[@inteluhdgaming1524]

Very nice and well explained. Every tNice tutorialng is crystal clear and easily understandable.

[@keithprice1950]

It seems like Rust is really gaining momentum at the moment. I've switched from learning web dev with JavaScript to focusing now solely on Rust, not for any particular field, I just want to really get to grips with Rust. I'm taking a gamble but it feels like a really good investment.

[@snoop_bla]

Amazing content dude!

[@LowLevelTV]

Glad you liked it

[@DCODev]

Excellent tutorial and information. Thank you for sharing. Just gained a new subscriber! Thanks again!

[@LowLevelTV]

Thanks for the sub!

[@DCODev]

@@LowLevelTV my pleasure!

[@beratakcay2017]

You are a living god among n, a legend worthy of praise. What you've uploaded here, will echo into eternity!

[@jarvenpaajani8105]

Wait a minute, how did you figure out how many nop's you needed? Really good work, totally earned my subscription!

[@Gramini]

It's just an arbitrary amount. NOP = no operation, which is used to make the program sleep. If it's blinking too fast, make it more. If it's too slow, reduce the number.

[@ahmetkocabyk1555]

WOW!!!! This video is very helpful!!

[@NoorquackerInd]

This is insane. I can't believe it didn't take _that_ much work to make this work in Rust

[@chillbro2275]

The most work comes in figuring out what you need to do. Scouring documentation, and elsewhere for the key information is an absolute pain.

[@nathan12581]

Would love more videos on baremetal kernel programming in rust. Maybe stepping slightly into OS programming ?

[@echoptic775]

Did you hear about starfive riscv board? Its not out yet, but looks nice

[@LowLevelTV]

I have not! I'll have to go check it out.

[@edgeeffect]

It looks really good.... I just wish you could get something with RISC-V that was as cheap as a Blue Pill .... RISC-V is better than ARM..... anything is better than ST Microelectronics..... but that Blue Pill is everso cheap!

[@edgeeffect]

.... oh, pardon me, I was thinking about the Lo-Five.... But, again, the price compared to a Raspberry Pi is kinda shocking. Without them getting the price down, despite any superiority of design, I don't see how RISC-V will ever compete with ARM.

[@brandongunnarson7483]

I have no idea what I just watched but I enjoyed it

[@ibressa]

Love your stuff! Big help!

[@uuu12343]

Unironically an actually good rust tutorial in general lmao

[@grimonce]

Would be cool if you explained how you came up with the number 50000 (like a word about the built-in clock).

[@gardendado1999]

It's an incremental counter, imagine a for loop that does nothing but counts i from 0 to 50000 then exits, basically every timer is built like that, to count time you need a frequency clock to time ratio if you want to count seconds precisely.

[@ProtoByte]

I would love to see you setup and use Rust within an STMCube or MPLABX IDE development environment. Also curious if those IDE's could support ICD with Rust. I could use Rust professionally if I knew how to do that.

[@GeinponemYT]

Awesome video! I always assumed it would be extremely difficult to get Rust running on bare metal, but this makes it seem pretty easy (I bet it took you a while to figure all of this out though, so thanks for the great tutorial). One question though: how would one integrate some sort of a filesystem into this? Say I want to store files on the RasPi and access them from within Rust. Is this possible (maybe by partitioning the storage device beforehand...)?

[@pimesonhadron]

Thank you so much for this video - that’s really cool! I have done something similar in C++ but to see this in Rust is awesome! A follow up question if that’s okay please: let’s say you wanted to write a Rust application to run on Linux on a RPi 3B, what would you prefer: using the /dev/gpio* interface, or actually tweaking memory mapped addresses? What does the Rust code look like there: obviously you don’t need to bother with no_main right? Would love to see an example - if you or anyone has done it please.

[@caretchara]

You should honestly start a udemy or something alike. You're a natural teacher!

[@KresnaPermana]

love the video,this is what i want to try with rust! can we get more bare metal like this on another device? arduino maybe? thank you

[@jordixboy]

really good video thank you! Im really confused, how can a file start at position 0x000..8000? what does that mean? Isnt each position incremented for each byte of data we have, and files start at position 0x0?

[@LowLevelTV]

The file gets loaded at that address by the RP bootloader. We need to make sure the code we write is aware of that, otherwise offsets may be wrong in the code. Theoretically we could compile the code "position-independent" to get around this, but that's not always easy.

[@jordixboy]

@@LowLevelTV ahhh its like an offset? so we have other data before that position (0x0 ..0x008000) and that file is loaded after all that content exactly at position 0x00..800

[@minirop]

@@jordixboy at address 0x00000000 is the start of the bootloader (it's own vector table). and the 0x8000 offset is to be future proof (so the bootloader can grow/be replaced by another one without exceeding the reserved max size)

[@edgeeffect]

The 8000 is the address in memory that the code gets loaded at. It's not a file offset which is just the position of the bytes in the file.

[@Noliv3]

screen in the top left, look at where it says program and click on where it says “aggressive te” and change it to “analog app 1 te”

[@samjohn1063]

Good video thank you , updated visual studio and everything worked. I'm really glad I found a working crack

[@thebiomicroguy]

I have grasped many info from explanation. Some of them were completely new to me. I'll appreciate if you were able to zoom just to the area where lines of code are written, specially the IDE. Thanks,,

[@ashfaquekhan7282]

1. Very humble request sir, Can you make videos on how to find and learn things, for example how to get the neccessary information required to do xyz task, like the kernel and program you wrote to blink an led using rust, suppose If someone just thought about it and just wants to do a basic thing , how can they achieve it 2. Grapichs and ML/DL processing chip, something like running a stereo vision camera on a edge device which is not a SoC like raspberry pi, performs good, can run basic depth perception, or use an FPGA , a custom ARM chip for product development 🙏🙏🙏🙏🙏🙏 Please

[@steffanjansenvanvuuren3257]

Great Video, I wrote a Synth app in C#, I started coding it on a Microcontroller, but had to move it to my PC for speed etc.etc. Now I want to implement it on a Raspberry Pi. What would you recommend?

[@joemarc0]

this was soooo useful, thanks

[@willi1978]

this is very cool. embedded programming is very interesting but so far i didn't dare to try it yet

[@grimonce]

That's what we did on the university, but I was never good enough to actually get a job in embedded, so I just write Python stuff... Good luck to anyone pursuing this as a career choice. This is however a great hobby and great for home automation, maybe starting your startup...

[@mariogeier6172]

Thank you for the well made video! Which command can I use on windows to extract the binary from the elf file? I use the Visual Studio C++ Build Tools.

[@cherubin7th]

Cool, I thought bare metal would be much more difficult.

[@grimonce]

Well it is not that bad if the program memory can be loaded from an external SD card. If not then you need some kind of gateway into the built in flash, usually board producer provides these.. custom boards it is on you.

[@0netom]

It's fantastic to have so much knowledge packed into such a short video, BUT this knowledge should not even be necessary! How one even gathers all this info on their own? That would probably take a few more hours to explain :) I think this video clearly demonstrates how abnormal is the current state of software development: * Half the story was about how to *disable* features. * We needed a linker configuration, which was *not* in Rust, but some whatever file format, AND it was just as long as the final program. * It also had to be copy-pasted, because it isn't intuitive enough to remember. * Nothing in the 1st half was related to LED blinking. * At the end of the 2nd half, we had to *download and trust* 3 binary files, ~3  *million* bytes in total, with "magic" file names, to run this ~200 byte (NOT *kilobyte*, just *byte*) example program. * Finally, we had to *disable* a feature, again, because we are not even utilizing the full 64bit capabilities of the hardware.

[@Andrew-rc3vh]

I'll give it a gold star for devising the most complicated way so far to flash and LED with a microcontroller. One wonders how many lines of code does it take to add two and two. More than the number of electricians to fit a lightbulb I'd say.

[@ankk98]

It looks really hard to do low level programming. Huge respect for those who do.

[@daviderwin2808]

Niceee what's the software used for the illustration at 0:45, I'd love to try it out

[@gplusplus314]

I didn’t know where to ask, so I figured I’d try in a KZbin comment. Do you think you could do a video on various career paths that can be taken as a low level programmer? I have tons of experience doing high level things, but I’m considering a career shift.

[@youtubepooppismo5284]

Great video 10/10 clear and interesting

[@GRHmedia]

If you are writing a kernal and it bootstraps in that is the effective OS. You can do that with any compiled language, C,C++ ... How do you think Operating Systems are created? If anyone wants to learn a lot more grab a book called "developing your own 32 bit operating system" You can use the same methods to create a 64 bit system or a lot more.

[@Scriabin_fan]

How do you learn this information starting at 2:14? This just feels like some sort of esoteric knowledge that one has to dig really deep to find. Not at all intuitive. But then again maybe I feel like this because of my limited knowledge of computer hardware.

[@ricsanders69]

My wife has said that I'm mad, but I assure you that I am not! Great video, thank you!

[@jwbowen]

I was wondering what I was going to do with my three day weekend :)

[@LowLevelTV]

Not a bad way to spend your time!

[@ashfaquekhan7282]

Or better , can you make a video to use a Raspberry Pi ARM processor as an Arduino board or MCU board, like running small firmware in it, so the sole purpose of that ARM processor becomes to run single / multiple programs in different cores. I know I am asking a little too much 😅

[@sonicspeedalyt8508]

Negative numbers are actually postitive, but with 1. For instance, 8-bit signed integer 2 would be 00000010 in binary, and negative 2 would be bitwise_not(2) + 1 = 11111101 + 1 = 11111110. When they are combined, it is equal to 100000000, and 1 gets truncated because its 8 bit. 2 - 2 = 0.

[@TobyMole]

Interesting info! Though I'm not sure how this qualifies as a custom kennel?

[@petomni]

If set 0 pulls it low, does clear pull it high? If so, then why is there also a set 1? Thanks for the great video!

[@samgilliam7593]

Can someone explain the syntax he used for assigning the values to the memory addresses? Im just getting into this stuff and I am confused as to why bit shifting is necessary and what its actually doing there

[@bennguyen1313]

Any thoughts on the article by bunnie, Rust: A Critical Retrospective?