The one thing I love about the charger from RYOBI is that when the battery becomes fully charged, the charger goes into save mode which means the battery won't over charge.
@LifeProjX7 ай бұрын
I wasn't aware of that. thanks for the info!
@toolsonabudget77637 ай бұрын
They all do it
@spacecassette21084 ай бұрын
Bro welcome to 2013 they started doing that long ago with all electronic equipment 💀
@BoraHorzaGobuchul3 ай бұрын
Also that's not their fastest charger. And whatever you may say about the bulk and odd shape of their batteries, they're the easiest and most pleasing to seat in place. Partially because just sticking a thing in a hole is much more natural than sliding, partially must be psychological thanks to how this is similar to putting a mag in, makes you feel so manly and op
@ibewillow2 ай бұрын
@@spacecassette2108 No they dont. The Bauer, which i i think is the same as Ozito in other countries...... the instructions specifically say not to leave the battery in the charger as it will overcharge and cause damage to the battery..
@anesthesiadreamin6 ай бұрын
Lol I own all three of these, so this was a fun video to watch. My DeWalt is not speed adjustable, but the trigger is variable speed, and it's pretty good, but my Ryobi and Bauer all have three different speed settings /torque settings. I do like that better. I have dropped the Ryobi off a 10-ft roof three times, and it still runs. Totally fun video, I don't know why I didn't get more hits, it should, you guys are a blast
@ChillOut17167 ай бұрын
I used a Ryobi to build displays metal/wood for a company and it was a Beast every day.
@PimpDaddyDisco5 ай бұрын
I use a Bauer on the job daily for the last 5 months. It's a bit heavy but can't beat it for the price
@1GiPhoner5 ай бұрын
Props to you guys for getting all that work done. Appreciate the review!
@imnotmike11 ай бұрын
Your mistake was using phillips head screws. I have that Bauer driver and I use it with star bit construction screws, and it is a breeze. It's a pleasure to use. Practically no effort at all. 12,000 screws is still a lot, but trust me. Next time, T-25 star bit screws. You'll love it.
@LifeProjX11 ай бұрын
It definitely would have been nice to use star bit construction screws, but it would have been much more expensive. if I end up doing another review Ill consider it tho!
@homiefromfl4 ай бұрын
@@LifeProjX next challenge shouldve been to un-screw all those screws and tally up the speeds/battery/etc or each one, so you could give those screws more life.
@The_Fallguy4 ай бұрын
Found your channel through this video. Great job! I appreciate the attention to detail and the testing format. I would love to see similar videos for their other common tools like drills, circular saws, reciprocating saws, etc. If you guys did that and stuck with it for a while I think it would make hugely successful videos. This is exactly the kind of content I was looking for. Thanks.
@LifeProjX4 ай бұрын
Thanks so much for this comment. I am going to try and do some more of these. It takes a lot to make a video like this since I do all the prep, research, filming, editing and everything by my self. I really like making these videos. Im going to try and do another one as soon as I find some free time!
@robbiechizzang10 ай бұрын
Great video, great reviews. I've been a RYOBI fan since they were blue/yellow. Good to know how the new impact stacks up. Agree that not having the LEDs on the chuck is a huge negative. I have the first brushless you showed - it has the LEDs on the chuck and it's great when you're working in a darker spot. For the reference - wasn't that in a movie? I dunno, I can't total recall...
@kevinbarber32085 ай бұрын
I've noticed some makers will forget the belt clip!! Bauer ALWAYS has a belt clip! And the far best warranty! And in my opinion! The best operation and feel you can buy! And looks AMAZING!! You do need the 2 year purchase warranty! I mean! It's 20 bucks! And no questions asked!! You just take it to harbor freight and get a new one!! I have about 10 battery platforms!! I use bauer and buy bauer more tan any! They have everything! And it all works perfectly!! By the way I've returned my ryobi tools both times I bought them! They just suck!!!
@LifeProjX5 ай бұрын
I have been getting a lot of comments talking about how happy people are after switching to Bauer. Its looking like its going to be coming up and bumping out some other brands in sales in the near future.
@cpthornman7 ай бұрын
I didn't even need Arnold to get that Total Recall reference. Nicely done!
@LifeProjX7 ай бұрын
Thanks! And nice recall haha
@TickleBall Жыл бұрын
I have that EXACT Ryobi driver. I’ve driven decking screws, lag bolts etc… with it and it’s never, EVER skipped a beat. I also am invested in Makita. Yes, there are some situations to where I go to Makita for really heavy lifting projects, my Ryobi driver out classes my Makita driver by a long shot.
@whatsmolly57419 ай бұрын
I liked it so much i got a 2nd one. Just wish ryobi put this much effort into qc with all their tools. Like their brushless Sawzall thats marketed as professional use but they never bothered to strengthen the piston holding the blade and that sht broke after like 2 weeks and im not using it as a professional by any means. Just so stupid because everything else is great but they just somehow ruined the whole tool with 1 component. Exact same issue as the non brushless Sawzall so its not like they couldn't see it coming. Brushless belt sander had a knob snapped off which i managed to weld back but the whole tool is just janky, belt doesnt really tension correctly and thats just really disappointing for their hp line.
@lukas______8 ай бұрын
@@whatsmolly5741that's why ya go with Ridgid for their LSA
@ROACHRAGE210 ай бұрын
I'm not surprised by the Ryobi win, but there are other factors in play! First, the number of devices they have that work from the same batteries is stunning, including multiple flashlight types. I also have a very high quality 900 lb-ft impact tool, an angle grinder, and portable vac. Additionally, their prices are pretty decent for batteries and other tools. I have four 4 amp batteries, and rarely need a charge between projects. My recently purchased 900 lumen LED flashlight was accidentally left on for 4 hours on a full charge and still showed all bars on the 4amp battery. The next test might be to shop brands and see who offers the most capable and diverse tool line-up, especially concerning price!
@LifeProjX10 ай бұрын
That's a great video idea. I think Ill make that video coming into the holidays. probably be good for when most people buy tools!
@josephjdesouza Жыл бұрын
Solid test guys! Ryobi always has me on price point for most tools and battery interchangeability with other tools, but they seldom come in as top choice for power. This review surprised. Dewalt tools are comfortable by trade. If you get a chance to do future tool comparisons, I'd drop in a Milwaukee as they have a solid rep on power. Screw U, Benny! - Total Recall
@LifeProjX Жыл бұрын
Thanks! Milwaukee is next on the list for sure. Wish we could make more consistent videos, but we just kind of get to them when we get to them. Awesome catch on the movie reference! 😂
@Nashvillesky20 күн бұрын
Found your channel through this - subscribed. I’m a recent Ryobi convert, and this is on the list to replace my dewalt. Very impressed with the HP range, only one I’ve tried that i think needs work is the Track/Plunge saw. The Jigsaw could do with a dust port but i like it nonetheless
@LifeProjX17 күн бұрын
Thanks for the follow! I really appreciate it! I am working through some reviews on some more ryobi stuff.
@kalebkaiser64403 ай бұрын
Most of my tools are Bauer, can't beat the price with that power and durability
@LifeProjX3 ай бұрын
I was super impressed. I am about to test the hart brand from Walmart so we are going to see how that goes
@agayfuzzypandabear376916 күн бұрын
I'm late to the party but I definitely enjoyed and appreciated the video. You've earned a like & subscribe here. That Ryobi impact is actually my daily driver for both work and home, and I keep a 4Ah in there.
@LifeProjX11 күн бұрын
Thanks for the like and sub! I am running the 9ah right now and its awesome haha
@pablocerda6504Ай бұрын
I own a handyman/remodeling business and for my battery tools I use Makita.. the thing is that they are sooooo expensive. I really appreciate the video, it is what I was looking for to decide my mind on if buying Bauer was worth it ir not. So I'll keep my makita drills and framing saw because they are the most used, but every other tool I buy will be bauer. Thanks again for the video
@LifeProjXАй бұрын
I have a few more Bauer now also. Glad we could help
@imaginedmountains23118 күн бұрын
Most impressive survival after a fall I've seen was a Makita impact driver. Coworker dropped it 42ft onto asphalt, and then it tumbled down a flight of concrete stairs. The LED shattered but otherwise it worked just fine.
@LifeProjX5 күн бұрын
Ill have to grab a Makita and try it out!
@coryholden6669 ай бұрын
I have that same Ryobi impact driver and a Craftsman Impact driver that I kinda use at the same time. I live in central TX, and since it's so hot in the summer, I do most of my stuff at night. I use both impact drivers because of the light placement. There are times when the light being on the base (Ryobi) works better than the top mounted lights.
@LifeProjX9 ай бұрын
that's a good insight. I haven't found any situations that I like the bottom mounted light meter, but I'm sure youre right that there are situations.
@BoraHorzaGobuchul3 ай бұрын
I have various tools with different led placement and though I prefer a led ring around the chuck the most, I must confess that this ryobi's led is more than decent. I expected it to perform poorly but the lighting of the work area is quite good. The only here I have about the tool I've got it's that is bit ejection sometimes gets jammed. Also, if one needs more power, I've heard it performs better on HP batteries, particularly the 9ah one. It's heavy and expensive though, and I suspect the improvement to be marginal.
@coryholden6663 ай бұрын
@@BoraHorzaGobuchul I have that same problem. It doesn't happen too much with screw bits, but any time I use a socket adapter, ejecting the adapter almost always requires vice grips or a few tqps with a hammer.
@BoraHorzaGobuchul3 ай бұрын
@@coryholden666 nothing so extreme in my case, luckily, I just have to jiggle the ring manually, but then again, I haven't used it for really heavy stuff
@siraugustwinter8 ай бұрын
Love the video! What I would add is that when it comes to the bauer warranty; you can buy the optional extra warranty each and every year. They have a "no questions asked" kind of policy, so you can go in under warranty and grab a brand new tool right off the shelf. In and out within a minute. Really, no hassle. They usually have a deal as to you buy two Bauer products, and you get the third free as well. Their current deal is buy the 5ah battery at 68 bucks and get the impact driver free. That alone is a huge selling point. Your video just helped me make up my mind, Bauer is the way to go. Imo
@LifeProjX8 ай бұрын
Glad the video helped! I have seen some good deals on the Bauer products but I did not know about the extended warranty thing. Ill have to look into that!
@siraugustwinter8 ай бұрын
With how far their quality has come it is definitely worth a look. I like to grab their predator engines every now and then. With the extended warranty, as long as you empty the gas and oil, you can bring it back, as long as you didn't obviously abuse it of course haha.
@joseCalderon1976Ай бұрын
Excellent comparison! Thanks for all that effort 😮👍. I have a Makita XDT15RB impact driver and I really like it. But it was expensive. I just use it for my RC hobby. Yeah, that particular model form Dewalt is not recommended it. What I've been told is to get the DCF 840, or better yet, then DCF 845 👍
@sniperdken7 ай бұрын
I like Ryobi. I have been buying them since the late 1990's. I have not yet had to replace one, but I have added on with the better upgraded versions on some of the tools. The only thing I did not like was the batteries for them until they were also upgraded. My 5 1/2 blue ryobi does have a hard time cutting 2x4's, but it is old. I do stand behind them. There isn't a brand I hate as u add to what I have, depending on my need. Thank you for your channel and it has helped, and I always keep an eye on the sales you send out.
@LifeProjX7 ай бұрын
After I started upgrading the batteries I thought all the ryobi tools performed much better. Thanks for the comment!
@mattg99587 ай бұрын
Fantastic presentation. Ty. Loved the charts shown and rankings. I would like to have seen the numbers too for each test.
@LifeProjX7 ай бұрын
Thanks for the comment! Glad you liked the video. I can add the numbers for each test in the next video. I think we are doing Milwaukee - craftsman - hart
@mattg99587 ай бұрын
@LifeProjX awesome, I'm looking forward to the next video. I'm interested in buying ryobi tools, I'm a hobbyist and am careful with my tools. Thanks again.
@jeffleake19608 ай бұрын
Ive got the Milwaukee gen 3 impact and my god is that uncomfortable to hold . After 3 years of daily i have big pressure sore at the base of my thumb that makes me have to hold the tool in a unnatural position when im driving home a lot of screws
@LifeProjX8 ай бұрын
I am setting up a Milwaukee vs Kobalt vs Hart. I don't think it'll be up until January tho. it's hard to find time to make those videos. there is a lot of work involved.
@adrianfla9 ай бұрын
Good job guys, i watch the whole thing, ur close to a view / screw.
@LifeProjX9 ай бұрын
Yea, I’m not sure it was worth the effort 😬 I appreciate the watch tho! Thanks!
@stinkycheese8042 ай бұрын
I went with the lower end Ryobi because I don't use it professionally and more so because I already had plenty of ryobi tools and batteries so the bare entry level impact driver from them was $21 as a bare tool. It works great, I couldn't care less that it isn't brushless.
@LifeProjX2 ай бұрын
I have a few of the brushed motor ryobis also. They work great and I have no complaints
@RomAerial7 ай бұрын
I recently bought a Ryobi screwdriver like this and it came with a hook. Loved this tool from the first use!
@LifeProjX7 ай бұрын
I hope they start adding the hook in all the tools. I was disappointed when this impact didn't come with one.
@1891kmk7 ай бұрын
The ryobi precision scissors r pretty sweet too
@lennydetloff1031Ай бұрын
Great video and excellent time for me to see this, been looking to purchase one and I'll be going Bauer 😮
@LifeProjXАй бұрын
Glad we could help
@ryandonley87063 ай бұрын
Love my Bauer tools been using them for years never had to return one or exchange them still going strong. I use dewalt and Milwaukee for the auto mechanical stuff.
@anatolyspencer27307 ай бұрын
I have that ryobi impact and I have the Milwaukee m18 fuel impact - honestly? I like my ryobi just as well - it’s in the same bracket as the Milwaukee. So no surprise it blew these others out of the water
@LifeProjX7 ай бұрын
I am getting ready to do a review on the Milwaukee. looking forward to comparing it to some other impact drivers
@ajdonally1522Ай бұрын
As a contractor..i grew up with DeWalt..and ive found that today..if you dont by the XR version of the tool..its pretty much garbage. Ive dropped my driver several tines from 16ft up onto concrete amd ots still going strong and its comfortable for my hand. It is interesting how Ryobi did. I've been hearing some good things about them.
@LifeProjXАй бұрын
Ive been impressed with Ryobi lately. Didn't used to like them, but the newer ones have been good.
@plunder19565 ай бұрын
Just a tiny point. The Ryobi LED position is actually better for me. It depends what situations you deal with most. But I wish it had a belt clip.
@rkraiem1008 ай бұрын
This def deserves more views
@LifeProjX8 ай бұрын
I appreciate that!
@bobwilson2034Ай бұрын
Guys, I signed in to subscribe and like. 12k screws!! Appreciate the time and effort I must say.
@LifeProjXАй бұрын
Thanks! we are actually beginning filming the next impact review tonight.
@Boodoo4You8 ай бұрын
Here in Australia Ryobi’s drills and drivers have a 4 year warranty, but if you register them online, they give you 6 years. Is it the same in the US? Edit: US only gets 3 years “limited warranty”?? Don’t get me wrong, 3 years is still 3 years, but that kinda sucks that you don’t get extra.
@LifeProjX7 ай бұрын
that's good information. Thanks for sharing! I only did a brief dive into the warranties.
@Boodoo4You7 ай бұрын
@@LifeProjX All good mate! There’s only so much you can fit into a video without it being too bloated. Loved the video. Videos like yours help us make informed decisions. Appreciate ya!
@N0body2474 ай бұрын
You could buy a kit for the Bauer it’s $60 and includes a bag. The tool alone is 40 if you had to replace the tool because it wasn’t covered under warranty for whatever happened to it. It’s still cheaper than buying one of the other ones so you might’ve said Ryobi is the winner technically Bauer is long-term. Because the tool is easily replaced.
@ZENO3572 ай бұрын
This is the first test I've seen where Ryobi came in first, especially beating Dewalt. Way to go Ryobi! (I have a bunch of their 40 volt yard tools and like them a lot.)
@LifeProjX2 ай бұрын
I actually have some of their yard tools lined up to review. (when I find the time)
@ZENO3572 ай бұрын
@@LifeProjX Great - some of my Ryobi yard tools are 8 or 9 years old and the batteries still work (although they now test out at 20 volts instead of 40, but most of the tools still work with them). My newer chainsaw however needs the full 40 volt (and I have 3 of those that are full strength). I always buy the tool to get new batteries - still cheaper that way. I'll be on the lookout for your review.
@Kreacher19748 ай бұрын
Personally i like Bauer and Ryobi but i only use it to scrap. I really like the Milwaukee 12v drill and impact driver.
@LifeProjX8 ай бұрын
Ive used ryobi professionally full time before and they have always done good for me. At least the impactors. I have had some pretty bad tools from ryobi that have set on fire when I tried to use them professionally.
@tachometer-flac4 ай бұрын
For me the problem with Dewalt was the battery chargers. Drop them from 1 or 2 ft. and they stop working. After replacing them 3 times I switch to Bauer.
@davidostrowski82456 ай бұрын
I have the bauer. You forgot to mention it has tree speeds.
@thebocop24 күн бұрын
Maybe now ppl can shut the fk up about Ryobi being bad and Bauer deserves some respect. Nice to see!
@mannyg20623 ай бұрын
I just got my Ryobi the price is reasonable and performance is great
@LifeProjX3 ай бұрын
Nice!
@basharyassin70913 ай бұрын
I bought my contractors Bauer and back drivers, did not buy the warranty, We lost all of them within 6 months We still have only the Multi-Tools running, everything we bought was brushless and only the multi-tools survived
@LifeProjX3 ай бұрын
I will have to try the multi-tool. I have the ryobi and I think its junk
@basharyassin70913 ай бұрын
@@LifeProjX the brushless one from Bauer served me well so far
@redfish-vg9dj6 ай бұрын
How?? How is Ryobi the runaway winner, YOUR tests showed that the bauer was the clear winner on screws per charge, AND torque with the lag bolt test, I am so confused right now????
@mp31558 күн бұрын
Ryobi always the best! It came from the underdog to being #1. Just like AMD vs Intel, AMD is crushing Intel like its going out of style!
@LifeProjX5 күн бұрын
they are a good underdog story for sure.
@jeremyjones8872 Жыл бұрын
I have all 3(baught the bauer because needed impact left others at house) and i actually use the bauer on some uses and prefer it,BUUT the battery doesnt last as long,i only have the cheapo.ryobi is my next fav,and dewalt seems to barely have more power but battery last longest..just my experience and i use em everyyday
@Toolsareus21 күн бұрын
You should do another one of these tests, but add the Hercules in
@LifeProjX21 күн бұрын
we are currently filming the next one
@Toolsareus21 күн бұрын
@@LifeProjX cool is the Hercules in it
@LifeProjX21 күн бұрын
@@Toolsareus hart, we had do do brushless to keep it fair
@Toolsareus21 күн бұрын
@@LifeProjX that makes sense
@tro81913 ай бұрын
Dude u guys are cool! I wanna drink beers with u fellas in that kick a** workshop and do the rafter drop! Thanks for the info, I’m goin Ryobi! Total Recall
@LifeProjX3 ай бұрын
haha, good movie catch! ill drink a beer for you when we do the next video, but you gotta post a cheers video back!
@SaiyanPony Жыл бұрын
Redo the test with 2ah or 4ah batteries, I own both Ryobi and Dewalt tools. What I've noticed is that there's a huge drop off in power when the 1.5ah batteries reach half charge. This went for both platforms, those 1.5ah batteries are garbage.
@LifeProjX Жыл бұрын
I can do that I have 4 ah batteries for all the impactors
@MrBarto9610 ай бұрын
Oh no brother, youre doing 1 milion screws for 1 milion subs, no pain no gain
@LifeProjX10 ай бұрын
haha, if I ever get a million subs (unlikely) Ill see what I can do 🤣
@MrJimslaton25 күн бұрын
I bought the Ryobi after watching this video.
@LifeProjX25 күн бұрын
Glad we could help!
@BroncoHenry5759 ай бұрын
5 months later & I subscribed
@LifeProjX9 ай бұрын
well I appreciate it!
@sunnicivang10937 ай бұрын
That same Ryobi bundle I got for $90, 7 months after this video was uploaded.
@LifeProjX7 ай бұрын
One of the reasons I like Ryobi. Crazy inexpensive for the quality you're getting
@JohannGambolputty222 ай бұрын
HF for the DIY’er always wins. Always. I’m speaking from 30 years experienc.
@LifeProjX2 ай бұрын
Im starting to come to that conclusion
@honda1169693 ай бұрын
Total recall! Old skool 🎥🍿🎥🍿🍿🍿
@LifeProjX3 ай бұрын
Good "recall" haha
@honda1169693 ай бұрын
@@LifeProjX right! 🆒🎥12K screw's is crazy! I'm switching from Makita to Bauer. The price & not on commercial site anymore. They work just fine for me.
@jerryrexmmiiireg3271Ай бұрын
Arnold Schwarzenegger in Total Recall! To be exact! 😂
@LifeProjXАй бұрын
Nice
@DemonChicken3163 ай бұрын
i don't want to carry those batteries anywhere on the ryobi.. i love my HFT and bauer line, but regardless, the light and the battery shape/size on the Ryobi is a 100% deal breaker. imagine needing to carry more than 1 ryobi battery anywhere with you. regardless, this was an epic comparison video.
@LifeProjX3 ай бұрын
Yea I have a lot of the ryobi batteries and they are a pain to carry around. Thanks for the comment!
@Exeter17053 ай бұрын
Frank from Michigan here ............ hey guys ... when are you going to do a video where you take out all those screws!! 😀😃😁
@LifeProjX3 ай бұрын
... never... haha
@bradmarwood Жыл бұрын
Next you have to remove all those screws 😂
@LifeProjX Жыл бұрын
I was going to burn the wood and pull them all out and grab them with my magnet haha
@karens5491 Жыл бұрын
😂
@loktom4068 Жыл бұрын
It makes me wonder how the RYOBI got its motor smoked often by other regular tool testers on KZbin.
@maxholes2703Күн бұрын
This video is awesome 🔥
@LifeProjXКүн бұрын
Thank you!
@KhrimsonАй бұрын
Did anyone get the Total Recall reference in the "12,000"?
@LifeProjX29 күн бұрын
Nice
@homestar9216 сағат бұрын
Much of the hate that certain brands get is just tribalism amplified by the internet echo chamber. For a professional using these tools 8 hours a day 5 days a week, sure, the minor differences in performance matter. For a homeowner just doing DIY projects every now and then, the threshold for "good enough" is very different, and price must be a factor in the equation. I have a lot of Ryobi tools that I use maybe once a year. If my only options were DeWalt or Milwaukee or other expensive brands, I simply wouldn't have those tools at all.
@jamesh51876 ай бұрын
Absolutely hate my dewalt and my Makita been buying Bauer for the last year and I love them
@LifeProjX5 ай бұрын
I was not impressed with the dewalt
@chrispowell42519 ай бұрын
Great Video, thanks!
@LifeProjX9 ай бұрын
thanks!
@listentobj Жыл бұрын
Damn sitting at 205 views. I hope y’all get that 1,000,000 I enjoyed it!
@LifeProjX Жыл бұрын
Thanks! I hope we get 1M also. that would be amazing. Glad you enjoyed the video!
@jeffreymayer8550 Жыл бұрын
Are you sure you got the DeWalt brushless? The regular Maxx is NOT brushless. That's why there is such a difference in price. The $160 Maxx is a brushed motor drill. Just something most don't know and get really confused by.
@LifeProjX Жыл бұрын
Yea. The DCF809 is the model. I think the issue is that that model is compact so I think they sacrificed some power for size.
@WC3fanatic9977 ай бұрын
Using 5 digits of screws t just shit all over some wood mindlessly actually sounds like a great cathartic experience. Anything drill-like is oddly satisfying to use over and over, even with no real purpose behind it. Although admittedly I would have loved you rviewing the DeWalt DCF850 Atomic instead of the DCF 840 . . . which is miles ahead of it in terms of power and compactness. But considering DeWalts absolute garbage-tier nomenclature and numbering, I guess it cant be helped figuring out which one to actually look at. I actually have the DCF850 though, and while it wasn't the one I actually wanted (I was looking instead at getting the DCF845, which is their larger XR version), but it came in a great package deal and when I used it I was floored at just how insanely powerful that tiny thing is, and the almost laughably short head length of it (literally 4 inches) has helped me in more than a few ways I wasn't expecting it to in tight areas. The ergonomics of it are phenomenal too; with one of their Powerstack batteries (another thing I didn't originally care for but got one off-handedly and started loving it anyway) it's profile and weight is so minuscule and the ergonomics are so great that the entire experience is like cutting through butter; just a smooth, pleasant time without much distractions or discomfort.
@LifeProjX7 ай бұрын
I was thinking of doing a video going over all of the different models of dewalt to bread down the confusion. I might have to put that on the list of videos to make this year.
@danielbuehl432 Жыл бұрын
But… they all still work. See this is what happens when I let you finish a video by yourself
@LifeProjX Жыл бұрын
🤣🤣 if we get a bunch of views we can either break them or give them away. I'll let you decide.
@PainterD54Ай бұрын
I noticed there are no Milwaukee unit there. Wonder why? I'll stick to my Milwaukee products, they seem to be the best.
@LifeProjXАй бұрын
We started filming the Milwaukee review yesterday. Milwaukee vs Rigid vs Hart.
@TBD3.0 Жыл бұрын
Raymond Elmer DeWalt is rolling in his grave. I like all these brands. I'm Cheering for the underdog Bauer great product for the price point it is SOLID 👍🏻 Ryobi I have their products and they have never let me down 👍🏻 DeWalt I have a case of Stanley hand tools and I'm going to be purchasing the DCF900👍🏻 The list is long of quality great brands out there. Today I found out about the RIDGID R86211 the Big Dawg of them all it was so good that RIDGID had to pull back because it was out shining Milwaukee, it's a shame what they did with RIDGID it was to good for the market they held it back. It's also a shame what happened to Milwaukee H96B total recall, make sure you get the H96A if you get one.👍🏻 Anyways, I appreciate all these fine brands what ever works for you., and don't forget the Hercules by Harbor Freight their flag ship👍🏻 and the Warrior isn't that bad at all and their Chicago power tools for the novelist, there is a tool for everyone 👍🏻 But also don't forget you can always do it the old fashion way by hand and get some exercise in your muscles get the blood circulating 👍🏻💪🏻
@LifeProjX Жыл бұрын
Great comment! Appreciate all the advise. I would like to test more stuff in the future, but need to save up the money to buy more tools 🤣
@stevennihipali36077 ай бұрын
I would like to see the craftsman in this test
@LifeProjX7 ай бұрын
It’s on the list! We have a few videos dropping then we will come back for another review!
@Bludawg272 ай бұрын
Why is Bauer 50$ more than original price of 54$ or 60$ ?
@LifeProjX2 ай бұрын
I had to buy the charger and battery separate to make it a fair comparison
@berthagen38710 күн бұрын
No Milwaukee?
@LifeProjX10 күн бұрын
we are currently filming the next video and Milwaukee is in it!
@SmoothJK7 ай бұрын
Nice Total Recall reference lol
@LifeProjX7 ай бұрын
Thanks! haha
@ganeshnarayan5505Ай бұрын
The one thing all three of them have in common they are made in same factory in China.
@cornerofthemoon Жыл бұрын
Ryobi cordless tools seem to be hit and miss for me. I've had good experiences with most of their cordless products with the notable exception of their nail guns, which break and malfunction quite often. Their batteries use to be horrible, but they seem to be improving lately. Ryobi AC tools are also all over the map so do your research before buying.
@LifeProjX Жыл бұрын
I have had bad luck with the ryobi reciprocal saw and the hammer drill.
@lkm55 Жыл бұрын
I’m deep into Ryobi for home and carry Makita for work. The Makita drip, hammer drill, and 5” grinder are much stronger than the Ryobi. D
@LifeProjX Жыл бұрын
Ill have to try out the makita. Ive been using bosch for my hammer drill
@TickleBall Жыл бұрын
Don’t sleep on the Makita hammer drill.
@jonpluta926211 ай бұрын
Do you use the new ryobi + HP stuff or the normal?
@lkm5511 ай бұрын
Brushless. My problem was battery life. Good tools but not for drilling into 1/4” ar400 steel.
@motehopper9 ай бұрын
The true test is testing after the 10 battery charge.
@LifeProjX9 ай бұрын
all the batteries seem to be holding up well. Im still using all the inspectors.
@justina471111 күн бұрын
Bauer for $40, compared to the ryobi $120. Should've included the price. Bauer would have swept.
@LifeProjX11 күн бұрын
the $40 Bauer didnt come with the battery when we did the tests. when we put everything together it was price similar to the ryobi (still cheaper, but close)
@tomh9807Ай бұрын
U people are confusing an impact wrench with a compact drill like many people do Those are two totally different tools but both are drivers. What you are testing ate impact wrenches not impact drills.
@randygreen14236 ай бұрын
bauer updated their impact drivers compared to this video
@AsherRapp2 ай бұрын
Total Recall
@LifeProjX2 ай бұрын
Nice
@DWChiver3 ай бұрын
I can't recommend Ryobi and feel safe about it. I have seen way too many of their batteries explode in the past year.
@LifeProjX3 ай бұрын
I have noticed that the Ryobi batteries don't last, but I haven't seen any explode.
@MattGamble4 ай бұрын
The reason the other brands outperformed the dewalt is because you didn’t by dewalt stop of the line. Not even close to its best impact. Not hating but apples to apples comparison would’ve been better. I’ve used dewalt 4 years now and would never even think about swapping brands.
@LifeProjX4 ай бұрын
I understand the argument, but we picked the least expensive brushless in each brand because that's what most consumers do. I have a dewalt that would have killed this test, but I think the comparison by doing it by price point.
@MattGamble4 ай бұрын
My misunderstanding! Sorry. Just hate to see all the hate on the brand I make my living with lol
@neogen202 ай бұрын
Total recall
@LifeProjX2 ай бұрын
Nice
@FJBsaidcornpop7 ай бұрын
DeWalt has became crap, you might as well by craftsman and save a little money because it's the same thing.
@LifeProjX7 ай бұрын
we were surprised at how it underperformed. Milwaukee is next to be tested.
@richardwang4742 ай бұрын
Dewalt has a very scummy marketing team. They do this on purpose to confuse the consumer. That being said, i do use Dewalt every single day because i know they work and are decently reliable.
@LifeProjX2 ай бұрын
I love all of my older dewalt tools, just wasn't super impressed with the new impact.
@dgreer55374 ай бұрын
DCF850
@joshbaldwin38752 ай бұрын
total recall
@LifeProjX2 ай бұрын
nice
@TheVreillo16 ай бұрын
New subcriber here guys , great video , help a lot thanks 😊
@LifeProjX5 ай бұрын
Thanks for the sub! I appreciate it for sure!
@southern84222 күн бұрын
I thought bauer had 5 year warranty
@LifeProjX17 күн бұрын
nope. I double checked for this comment.
@southern84217 күн бұрын
@@LifeProjX Thanks, I appreciate it.
@thomasfogerty35156 ай бұрын
You bought the cheapest dewalt system on the market. Not really fair.
@LifeProjX6 ай бұрын
I bought the cheapest brushless for each brand.
@thomasfogerty35156 ай бұрын
@LifeProjX yeah but you didn't state that. You said you bought the cheapest knockoff brand from Amazon. Dewalt is not a knockoff nor did you say you bought it from Amazon you said you previously had that tool.
@jonathonlyles33498 ай бұрын
Ryobi is diy you guys r funny run the ryobi against a Milwaukee brushless and find out
@LifeProjX8 ай бұрын
Milwaukee is coming up in a future video for sure
@jonathonlyles33498 ай бұрын
Need to try a real tool lol get a Milwaukee fuel lol ❤ the video btw u earned my subscription
@LifeProjX8 ай бұрын
I think we are going to do another video with Milwaukee, Kobalt and Hart. I have to put up some videos about a lighted tractor parade that I film every year first tho.
@jonathonlyles33498 ай бұрын
@@LifeProjXsweet I look forward to it
@FotoTravis8 ай бұрын
Don’t forget Hercules
@LifeProjX8 ай бұрын
@@FotoTravis damn, how do I fit that in. Your right tho. We will have to figure it out
@chadhamilton887 ай бұрын
Did anybody say Total Recall at the bar but you guys got the shity DeWalt model they are different models to buy
@LifeProjX7 ай бұрын
I’m thinking about doing an all dewalt video in the spring.
@jakobrandolph31266 ай бұрын
Ryobi sucks Milwaukee all the way, ryobi is the homeowner special get Milwaukee if you wanna get acctual things done
@LifeProjX6 ай бұрын
Milwaukee is the next vs video. then Im thinking ill put the winners up against the Hilti
@jakobrandolph31266 ай бұрын
@@LifeProjX perfect, I’m excited to see how it all holds up just found your Chanel today and loving it
@pmp25598 ай бұрын
By kiss azz comments I’m guessing ryobi won?
@pmp25598 ай бұрын
Oh also, Total Recall
@LifeProjX8 ай бұрын
I am going to be putting it up against the Milwaukee before long. just takes me a while to make videos.
@pmp25598 ай бұрын
@@LifeProjX there’s tons of Milwaukee fans probably more than dewalt be strategic about it for safety reasons 😄I have all kinds of brands but I prefer corded. Planning to get one of those battery power pack like generator but I really don’t have a need for one. I was given a Milwaukee set as a gift, it’s the only battery ones I have only because I really don’t want to mess with expensive batteries. Thanks for the videos
@christopherworthington70007 ай бұрын
I never liked the Ryobi brand, color, battery or style of the tool...It looks Cheesy and not professional looking at all...I usually take multiple batteries with me...Ryobi batteries can't fit in a normal pocket or utility belt...And that stupid color again is offensive to my eyes!!!🤣
@LifeProjX7 ай бұрын
haha, I have taken some shit when ive shown up to a job with some ryobi tools. I use the 9ah batteries most of the time and I always give the shit back when other buys are swapping batteries twice a day and I don't have to change once.
@americanhero12347 ай бұрын
I bet you prefer fat women too, don't you😂😂😂
@Jiraiyashouse6667 ай бұрын
I build portable buildings and I LOVE my Ryobi tools and the whole cheesy look is a HUGE advantage especially if you are working outside all over the nation. My coworkers get their RED and YELLOW tools stolen all the time... I've yet to have to replace mine. 😂
@christopherworthington70007 ай бұрын
@Jiraiyashouse666 Well that's a plus...Jesus loves you...He has an amazing book written about you, before you were born...And He wants to talk you about it
@percival19077 ай бұрын
I like the sound of popping a Ryobi battery in. My Dewalt drill also has a really hard to move speed change switch.
@Glocktard Жыл бұрын
Fyi My experience is that Home Depot’s price points are at times on drugs. 😮 They literally will have 2 to 4 different prices for tool kits, they will have different SKU #’s with different price points, sometimes they include a cheap drill bit set calling it a different SKU. You have to be a careful shopper & diligent shopper.
@LifeProjX Жыл бұрын
I couldnt believe how many packages/options there were!