LS1 S13 Walk Around + First Drift!

[@ambushdrift]

Call me the cul de sac killer 😎 Do me a favor and drop a like on the video! Hope you have an awesome day!

[@dannygojcaj]

AMBush Drift you to my man❤️

[@jaames06]

The " Cul de sac killer " ahah nice word in French and Hello from Switzerland ;)

[@rdyn74]

James vicente ambush le tueur de cul

[@julienc638]

hahaha cheers from France !

[@naradmaharaj550]

What does the s13 have for angle

[@Vashtizzle1215]

Zenki = you Kouki = the guy she told you not to worry about

[@anticlikb8703]

Tarmacs on the Fit would be like 5 fire emojis.

[@codyd4noob]

anti clikb8 maybe 4

[@whatupguy5685]

anti clikb8 nah some sbc or gold rpf1

[@mindaugaskumza2343]

🔥🔥🔥🔥🔥

[@ManMrKrazy]

Also I love the connection you and your dad have. It really reminds me of how my dad and I used to be together. I joined the military and havent seen him in a year so I am missing him bad right now.

[@mikebush1665]

ManMrKrazy thanks man! And, I hope you get to see your father real soon!!!

[@MoistRat]

Hey Alan input shaft bearing in the trans is your problem.. your going to need a new transmission or a rebuild sadly. here is how to tell the difference, a throwout bearing will make noise when your clutch is pressed down. and input shaft bearing makes noise when your off the clutch pedal. good luck and keep making videos man

[@brianbanman6387]

It's funny how people think the throw out is the problem lol, I was about to comment with what you said but you beat me to it, we just need to get this comment noticed by Alan now!

[@MoistRat]

Yeah I work on my own vehicles and I know from personal experience that's the problem. thanks for agreeing. Thumbs up so Alan can see everyone

[@ambushdrift]

Comedy Video okay got it! Thanks for the help! So it's gonna need a full transmission rebuild? :(

[@MoistRat]

Yeah either way your going to have to drop the transmission and pull it apart so the choice is up to you. just replace one bearing and check everything like Brian said

[@DriftNick]

Probably done 10+ drift days on a gearbox making the same bearing noise, gearbox is still going after I sold the car.

[@chaomayne671]

Enkei does make RPF1’s for trucks. They’re called Enkei RPT1’s!

[@gokartsRfun]

Allen easiest way to get rid of that dent in the rear quarter - stuff a deflated football (or a block of foam) in between the strut tower and the sheet metal to keep pushed out!

[@ambushdrift]

Austin Higgins I'll def have to do that! Thanks austie 😉

[@anthonyodeychuk9618]

Ambush drift this car is something different than anything else

[@Aangsly]

You should get a sticker on the S13 for your lil' pupper

[@GR71393]

Your newish s13 and Trevor from automotionTV's giveaway S14 are my FAVORITE S Chassis cars on KZbin right now. Even though that didn't sound grammatically correct, I can't wait for more videos of this car! Great pick up!

[@glimmerdetail4126]

I still find it amazing that you can road register a car like that and drive it on the streets. Here in Australia, it would be an immediate defect notice! Very jealous!!

[@tylercollette4109]

Slam the truck on rpf1's and daily it

[@xxdrsavagexxyt3755]

but he is not a ricer

[@Crystal-tt6yw]

From Tarmacs and rpf1's

[@Rasse796]

I don't see a truck..

[@kingvega0218]

XxDRSAVAGExX YT it was a joke...

[@Daper3x]

Tyler Collette he Reilly should

[@BronXTheBest]

Don't know if it's been said already or not, haven't read the comments lol but the noise you're hearing is either your throw out bearing or your input shaft bearing. More than likely input shaft bearing because TOBs usually squeak when worn unless it's REALLY BAD. I also have the same problem with my car lol.

[@TRStech_SkunkworX]

Not sure if you didnt figure out already, but the sound in neutral with open clutch is pretty sure due to worn bearings on the transmission input shaft. You open the clutch, the trans input slows done, stops -> no noise. Close it again -> noise.

[@cay378]

Just realized, You have Red, White, and Blue rides all on RPF1's. Murica baby!

[@THEFUTBALLER15]

That winding noise in the beginning is the throw out bearing! Happens to my SR all the time lol

[@andreasgran9326]

Like that your dad likes drifting and you work together on your cars with i had that with my father makes me happy to se your good relationship. You have a nice family and congrats on the new car nice choise.

[@samconroyy]

Love the whistling noise the engine makes.

[@KeepCruzin]

They make te37s for trucks that would look awesome

[@ambushdrift]

Stevo Cruz if I was ballin I'd get them for the truck haha

[@air4ce96]

That whirring noise is definitely coming from your throwout bearing. The T56 is known for have a throwout bearing and transmission that is a little on the noisier side.

[@Keef_Sweat]

I usually like zenkis, but that one is prime. RPF1s, blast pipes, manual, red, and daily driven with full interior is awesome

[@Taylordrifts]

OMG YOU COPIED ADAM LZ'S CAR BE ORIGINAL BUILT NOT BOUGHT BLEHHH!

[@derekgrant312]

Taylor Ray taylor place nice now ;)

[@ambushdrift]

Taylor Ray you're surprisingly the first person to say it 😂 figured I'd be getting roasted all the time about it

[@gardinbe782]

channel still not verified yet at 250k+?

[@999Joseph]

Taylor Ray fuck off

[@gardinbe782]

Mora Zymik what has he done wrong

[@A2mag]

Did Taylor just drove past you at 4:10 in his corvette ?

[@BeeRy116]

Honestly Alan, you should have WAYYYY more subs than you do. You are my favorite youtuber man. Keep staying humble :-)

[@dkamyanmonroe2894]

Hey Alan the throw out bearing would make a knocking sound when the clutch is depressed but be silent when your foot is on the clutch. I have the same problem with my Z33

[@stars7338]

Damn AMBush pulled a Haggard Garage meme 😂

[@LakeEdits]

Knew you from Taylor's and Adam's videos, this is your fist video I've checked out! Great commentating voice and quality editing! Earned a new sub!

[@ForOdin]

Are you gonna end up putting a hotter cam in the LS1? Think you'd like the rowdy idle, not to mention the extra power.

[@tsimon1]

Ayyyyyyy! The previous owner has been to Raceway of The Midlands for an O-Drift meet. Super rad!

[@Team8k]

I haven't been up to date with your channel until now, but dang that S13 is so nice! *Drooling* Cant wait to see more progression from you!

[@andypresland]

This car is epic! Sorry if I missed it - how did buying this car happen instead of engine swapping the frs??

[@ahkeemdesinor2810]

Enkei does make a truck version called the RPT-1

[@timmah1588]

Any plans to do a wrap with an ambush livery for competitions?

[@ethanbreckenridge6719]

Are you going to pump out the dent in the left rear quarter panel you can see it pretty good at 11:49

[@nicktechnick]

My old knuckles and control arms are still alive and kickin I see!

[@robertdombrowski2456]

Latterly love everything about the Car it's it's my dream 240!

[@ExV1rUS]

That Haggard pun, love it! And its not a S13, but a LS13 :P

[@ShiftRPS13]

Correct me if I'm wrong, but I'm almost 100% sure that's an Apexi N1 exhaust.. had the same one on my car years back. Sick 180!

[@zacparoz8812]

My throw out bearing makes the exact same noise. I thrash it and have never had a problem. Apparently aftermarket ones make a lot of noise in the LS

[@jamieknight1004]

definitely the throw out baring, I'm too damn familiar with that noise

[@LegendaryForces]

Nothing better than an LS, I love mine in my GTO and especially because it's procharged!

[@khiribrooks820]

and it is the throwout bearing just changed mine in my 02 5.7 ls1 for my vert had a bad throwout bearing and slave Cylinder

[@SVNTI]

A heat gun, a rubber mallet, and a little bit of patience will do those rear quarters good. Seems like you just need to flatten the lip slightly!

[@TheoMuchSpeed]

I laughed too hard at the clip with Jake Rio's crash at PARC. The car looks awesome dude!

[@ahmedalkhalili9100]

that whirring noise is probably an unshimmed slave cylinder resulting in the clutch to not be fully disengaging, had the same issue on my ls swapped 240

[@MrDustinclement]

I've got a roller if you make it to Jax any time soon you can borrow it or we can do it here

[@driftfinatic]

They are probably a32 cefiro/maxima tie rods. Thats what we run in nz on all our s13/14/15

[@sergiodeleon6379]

Can you do a video replacing the throwout bearing?

[@3968707]

They do make for trucks, Enkei RPT 1

[@cruz_cars7085]

It's the throw out bearing bro... I had same issue with my 79 f100.. until I changed that bearing it went away

[@em2attic]

And im glad it has an actual muffler on it vs all the open header or straight pipe barnyard v8 240 builds that sound like somebodys dads tractor!

[@isaiahlimon1444]

you should mount some go pros on the frs and the other cars to get some better shots

[@claytondegruchy5]

That noise is 100% the throwout bearing but it isn't a problem. Just gonna make that noise until your next clutch job

[@jm.4749]

Can you do a drift tutorial/tips for beginners from your experience with the FRS

[@MultiTerpen]

Love that blue color with the wheels! You should make some door panels! Aluminium would look much better!

[@userTomTom]

Please KEEP the car as it is . It is just so nice and Clean.

[@chrislamborghini6752]

i had a similar noise in my subaru.. my issue was the release bearing in the trans..

[@ecv1112]

Daaamn, making me think about getting some RPF1's for my S14

[@V.S.D.D.]

Haggard garage: Slam it on tarmacs and daily it AMBush Drift: Lower it on RPF1s and drift it

[@grant-nagy]

That looks like the smoothest drift car ever

[@ihavewaited90daystochangem51]

no hate about the ls1! what sorcery is this?

[@jonnyke7090]

Super cool man! My dad would love this!

[@diegofacundovargas7289]

The last time i was this early Alan's car was hitting a wall

[@nascardylan1]

It's a true 326 power wing:) remember that's my old wing :D

[@nascardylan1]

I actually drove 2 hours to meet Luke to trade him my wing for a stage 3 exedy clutch for my old swap:P

[@ambushdrift]

Dylan Damm that's awesome :D haha

[@nascardylan1]

AMBush Drift bro when I move to Florida we have to get a couple tandems in!! I cannot wait:D

[@THESKINIMIN1234]

FINALLY!!

[@le000n]

That's definitely the TOB same noise happened to my frs a few months back

[@dancingswan1484]

Are these setups legal to drive in the USA? Like in my county we could never drive that setup with the cut front end and new reinforcing and drift knuckles, u guys got it good

[@soradproductions669]

Hey man, could you tell us more about your exhaust? My LS is waaaayy too loud for street driving. Like you can barely hear me talking.3.5" duals, to a 4" single lol. Yours sounds really good.

[@anthonybrz]

lmfaoooo at the jake clip.. you shoulda put the shooting star one on lollll. Car is super clean man.

[@_ZAYA]

Can't wait for the tandems with Adam

[@meffycodrin1853]

If you would widebody IT what kit would you use? I think some small overfenders would looks sick(Pat Goodin's kit)

[@red666A]

Very nice, Yeah!

[@todd1196]

Hey man I'm from Nebraska and that O Drift Collective sticker is from the drift events we have. You should try and make it out sometime. It's pretty lit.

[@mikecrittenden464]

Damn that appears to be a nice solid built car nice man

[@TheSeventhW0Rd]

Ask Adam lz about the funny clutch sound, i think he had the same noise on his last clutch.

[@chitownbassin3571]

Raise it? Try grabbing a smaller profile or smaller diameter and lower it

[@chandlerparagon3458]

Do a video of Adam LZ's first impressions

[@billychip1223]

DAMN CALLED OUT DAT BOI AT 9:39 !!!!!

[@Chips009]

Would you rather turbo an FRS or v8 a 240sx. since you have both which do you prefer lol .thanks in advanced. debating to v8 swap or turbo the frs in the future.

[@gt1r]

Earn_ E v8.. so much more reliable and easier to fix.

[@jakevanhees7954]

for sure the Throw out bearing! its fucked part it out

[@ambushdrift]

Jake Vanhees 😂

[@brianbanman6387]

Input shaft bearing bra all day long, not the throw out bearing.

[@trippydrifter4674]

Hey man I am almost done with my Nissan D21 I would love to meet you up at Walmart and maybe go for a rip in the truck

[@kylecastro8090]

Hey Alan! How do you like that Bride replica? I'm kind of interested in buying a set. Love the vids man. Thank you!

[@jansoto6283]

I saw nacho just sun bathing 😂😂😂

[@dirty-36sideways51]

It's definatley the throw out bearing

[@moisesmora2098]

You can put rpf1 on the truck, just get them in 19s

[@carsareeasiertounderstandt6168]

Build guide pleeaasee.. my most favourite build combo.

[@sebamaldonado]

from my experiece aftermartket flutches make that noise. my brz does it since day 1 of putting in the new clutch.

[@TazjukieGaming]

can you put some nice over fenders on it, it looks like a blue adam lz car lol

[@eamicorb]

You need so much more subs bro love ur content !

[@sx-nw8vl]

Beautiful car 😍

[@em2attic]

All of lukes cars are bad ass af! Cant wait to see where you take the s13 and where he takes that new g8 he has 😈

[@FabFiend]

Two questions. What's the whining noise when in motion and also do you have to put tubs in it for the pro AMs?

[@sunburstyellowmiata9729]

You should get street faction door cards

[@trickz901]

Keep a bungee cord in the car so you can attach one end to the bar behind the seat and then the other end to the top loop in the hydro handle. Bam you got an E-brake

[@MDethCKR]

Hard to hear on cam, but is it possible it's just (aftermarket) flywheel noise? Especially since it goes away when clutched.

[@wrenchrat]

That noise is definitely the throwout bearing FYI

[@arthurraber3839]

at 4:06 is that Taylor Ray lol? And at minute 14:00 i don't think drift dad has seen the video yet. XD So what ECU is powering the LS? is it the stock ECU from the pontiac or is it aftermarket?

[@IROC-Z28]

The car is pretty dope, man!

[@ericmlr3829]

Next video " I put rpf 1's on my truck " 😂😂 jk man love the vids

[@victorgiannella8463]

I love the new car!