KTM Duke 125 200 390 Oil Change & Filter Change Motul K&N KN-155 Wymiana Oleju i Filtra S02E04

[@Finesnarl]

That's one of THE BEST motorcycle tutorials I've ever seen! Good Job!

[@MeeJunksEavy]

Just got a 2016 690 Duke R. Looking at the manual, this seems similar to your instruction. Except, I've got multiple oil filters. Heard the KTMs eat up oil, and that it should be changed more regularly than service intervals. Great video, thanks.

[@aaronhall9819]

Great video bud need more people like u showing how its done proper hope to see many more to come in the future

[@96vedant]

Thank you so much for this video, there are so many oil change videos on KZbin but your video is so satisfying i watch it again and again i loved it thankyou

[@anigrapixravi]

faster & neatly explained, I liked the subtitle. Thanks & good luck.

[@axierurresti981]

Thanks for the upload man, very nice and clean video, very instructive !

[@TTTAirsoftCAG]

Wonderful! Do more such videos for the care of Duke!

[@alan0ides]

Very good video, you’re working so clean and I like it. Many thanks!

[@krezel243]

No i dobra robota chociaż nie wiem co tam pisze po angielsku ale domyślam się😱😀😀 daję łapę☺

[@vishalpoddar90]

Nicely explained...excellent tutorial...loved it Keep posting..

[@roadsidechannel7542]

Great video thanks. I just bought a new Duke 390 and this is going to come in very handy.

[@shabeermoideen]

could please make a video on changing brake pads

[@syqrek8025]

mmmm kiedyś to było

[@azozazoz743]

The job is very uncluttered 👍🏻

[@RoyFocker001]

Nice and clean job!! Congratulations!!!

[@diabo686]

Verry good job i encourage you to continue 👍🏼

[@luczyn]

+diabo686 Thanks, I do :)

[@theofanisntokos]

first you must start the engine for ten min. and after change the oil

[@luczyn]

θεοφανης ντοκος Ofcourse, the oil will be removed more easily when the engine is warm. Mine is always warm ;-)

[@libraryofthoughts0]

This is optional, but basically all KTM Service workers do this: When you put the new oil filter in, put littlebit of that engine oil inside of that filter, sort of fill it up to 30%-50%, then put it in :)

[@luczyn]

I only do that with my enduro bikes, for the duke I add the correct amount after the startup.

[@pmtsoi9759]

this is really helpful !! THXXXXX!!!!!!!!

[@Wild_D]

Thanks! fantastic video! #dukepower

[@eastercompany]

Which graphics kit is that? I like the aggressive orange the duke has stock - so i never wanted to change it but that one looks better.

[@mrkikketto99able]

after how many km do you change oil? :) NICE TUTORIAL! Very accurate and professional!

[@luczyn]

+francesco guarini Same as advised by KTM and your service book.

[@aksu7371]

Hi man, i was wondering what is the difference between fully and partly synthetic oil? Which one should I use?

[@riley881]

What's best oil I should use as someone suggested 20w50 but I'm sure I should use 10w50 should it be fully synthetic aswel. All help wud be great many thanks

[@jacquesauxietre9344]

Nice vidéo...Juste a little thing, use a magnetic iron to remove the oil filter, like that its very easy. Sorry for my english

[@luczyn]

Jacques Auxietre Good idea :-) I haven't had any problems removing it without it though ;-)

[@P38Aaron]

great video, thank you!

[@rganesh1195]

very easy to follow.. nice one.. hope to see more videos. and subscribed! cheers

[@luczyn]

Ganesh Rajamani Glad I could help. There are many more tutorials for Duke 125, 200 and 390 on my channel if you need them.

[@rganesh1195]

yup goin through them now. Cheers! Have a good day!

[@rawindraarya4712]

Hey bro, its a really great video to learn! And btw, what size of tool did you use to open the oil nuts? Was it 17mm? Thanks a lot bro!

[@KyleDeVilliers]

hi, Just wanted to know, which oil filters are suitable for use on the duke 125?

[@geekerx]

i am right after this process :D thanks for this video as it was really helpful! Got one question though, when i was tightening drain plug i had a feeling that i overdid it at some point but with applying very little force... is it possible that the material that its made from is so weak?

[@darkchi6926]

Thank you for such a great video on this! Very, very helpful and well put together. However just a friendly heads up, KTM reccomends to use Motorex oil, not Motul. Is there a reason you prefer Motul? Also, what song is this in the video?? Love it!

[@luczyn]

I know what KTM recommends, I have the same manual as you do. Recommending a specific company doesn't have anything to do with the quality of the oil - they simply are business partners. Choose your own prefered oil after you check it's parameters, pricing and availability.

[@yavanochi]

Hey mate .thanks for the really informative video .If possible can u post a video on "How to change the coolant and flushing the Radiator". :D

[@normand_power]

Hi!!! thanks you for the video!

[@umutsenol2894]

can you tell us which tools did you use, while you are dealing with the screws

[@aakashrai5733]

I was looking for this... very helpful video. I noticed that the 125 drains oil from the oil screen and filter. In my 390 oil drains from the main oil drain hole, the oil screen and filter. 10W40 Motul ok for 390?? I can't seem to find the 15W50 where i live.

[@1xplorer]

For duke 390, which one is best for hot temperatures country? 20w50?

[@oscarmarin233]

Hola q tal necesitaba un favor de cuanto es la calibracion de la cfmoto 150nk de admision y escape de esa moto tengo una pero no se ese detalle y aca no hay taller de esa marca

[@dannyjr.3944]

What is the advantage of K&N oil filter compare to OEM ?

[@incursore9]

Hi, nice videos, very well made :) Can I ask which mobile bracket are you using? Thanks!

[@audiophillicaudiophile4390]

Dziękuję

[@annamasowska8708]

cześć i czołem panie LucZyn :), w bibli użytkowania do Dukea z 2016 zalecają Motorex Formula 4T 15W-50 (syntetyk), ty dajesz Motul 5100 (półsyntetyk) ?, napisz proszę to mogę zalewać Dukea Motulem 7100 10W-40 lub Motul 15W-50 7100 ?

[@tomeks922]

tego tutoriala mi brakowało na YT dzieki wielkie :D p.s czy po wymianie na filtry k&n jakaś poprawa? i w moim Duke'u 2015 na oczku olejowym jest podziałka na min/max u Ciebie tego nie zaobserwowałem, czy poprostu ślepy jestem? Lewa :)

[@luczyn]

A nawet się nie przyglądałem xD tak czy siak lejesz żeby było mniej więcej w połowie (1,5 litra) i wszystko. Od samego filtra w tak małej pojemności poprawy wydajności raczej być nie może, ale pojeżdżę więcej to się wypowiem. Filtr powietrza też zmieniony na K&N a wczoraj doszedł jeszcze nowy wydech i już warczy na Duku. Tutorial w drodze, dzisiaj będzie online. Lewa!

[@tomeks922]

LucZyn ja też właśnie z moim dealerm jestem dogadany na wydech LeoVince + mapa i montaż :) jaki wydech kolego montujesz?

[@luczyn]

KTMotoVlogPL Dealerzy zakładają teraz LeoVince, właśnie dopiero co koledze założyli dokładnie taki (zaraz po zakupie domówił, duka odebrał niedawno z salonu), dostał akurat tą ładną puszkę, nie tą stożkową z wielkim żółtym napisem tylko taką nowszą z nowym logo i czarną końcówką (jest filmik jak jeździmy razem to możesz looknąć). Brzmi całkiem ładnie, nie za głośno, ale podoba mi się - do Duka pasuje. Ja po przesłuchaniu kilotony wydechów w końcu wybrałem IXIL'a L3X, efekt na żywo przeszedł że tak powiem moje oczekiwania. Nawet nie wyciągam DB Killerów. PS. Mapa nic nie daje przy tym silniku, można sobie odpuścić - po prostu załóż i śmigaj.

[@tomeks922]

LucZyn odezwę się na FB kolego bo mam kilka pytań a nie będziemy tu spamować :)

[@luczyn]

KTMotoVlogPL Pisz tutaj jak możesz, tak mi jest o wiele wygodniej :-) fejsa to mało kiedy używam. Dyskusja jest jak najbardziej na temat więc do spamu nam daleko, przyda się innym. Wiem jak ciężko znaleźć w polskim necie jakiekolwiek konkretne informacje na te tematy.

[@tokarev_kirill]

It's very useful video! Thank you very much! Make more! ))

[@luczyn]

Кирилл Токарев I already did - a lot more - just check out my channel ;-D

[@tokarev_kirill]

I just changed oil by your guide ))

[@MyMoranteTheReturn]

you can make a video on how to bleed the cooling system?

[@yoavvazana]

great vid man. you just forgot to open one more screw at the bottom of the motorcycle. that will also completely drain the oil tank (about 150cc more.)

[@luczyn]

There is no such screw on my bike.

[@yoavvazana]

+LucZyn page 154 on the manual

[@luczyn]

Yoav Vazana Page 154 is about how to storage the bike when you do not ride it.

[@yoavvazana]

+LucZyn so maybe it's from a different year

[@luczyn]

Yoav Vazana Maybe, like I told you, there is no such screw on this bike. Everything shown above is by the book and 100% correct.

[@uvfmakem7959]

Hi how many litres do you put in for the oil change

[@Meeteepao]

Very similar procedure with a Honda CG125 minus a few additional filters.

[@EPICJJONAS]

Hi! I just watched your video on how to change your oils in Ktm duke 125. I did the thing before watching your video. When doing the test drive I noticed that oil was leaking in the oil filter cap. I tighted the screws too much and one screw snapped. Apperantly you had the same expereince before ? So I just wanted to know that how did you get the screw out of the holder?

[@luczyn]

Hi, yes I broke one of the screws from the filter cover and I wasn't even turning it hard. The stock ones are very fragile. It was very bad because the rest of the screw was still inside the thread, I thought I was going to need to drill this thing. I was very lucky I managed to slowly remove it using a very sharp pointy tool (stick it in the screw and turn) and very slim pliers. After that I just went to the nearest hardware store and bought a handful of brand new screws and put everything back in it's place. Very important thing to do in your case is to check if you have damaged the rubber seal on the filter cover. If you did you will need a new one because it can leak from now on even with 2 screws in.

[@FFA_PT]

Joonas Yli-Huhtala It happened to me the same thing... The KTM store does not have that screw in stock and they take 2 weeks to arive. What should i do, bought one pair in another shop or wait and bought in KTM ? And when you were taking the rest of the screw inside the thread, it was easy to come out ? Unfortunately i already put the new oil, if i lean the bike to the other side, with the help of a friend, the oil doesn't come out right ?

[@luczyn]

ride in redline It's a standard screw that you can buy in any hardware store for cheap - you do not need to buy any "special" screw from ktm. Wait two weeks for a screw? Do I even have to answer that? :D Mine was deep but came out pretty easy. How did you put new oil in if you didn't insert the filter and put the cover?

[@FFA_PT]

LucZyn Thank's for the tips :) I did everything like you did but before i put the spoiler i want to give some grip to everything, and that was stupid because everything was tight, so i just screw up, now i have a problem to solve and only monday the bike shop is open :/ The good thing is that even with the screw party and after walking a while there's no spill oil ;) (sorry for my english, i am portuguese)

[@beueuehebedududhdh]

Hey LucZyn I need new Oil for my Ktm Duke 125. Are the Mozul 15w50 good? Much people sayd to me that 15w50 Oil is not quite good. What is your experience with this oil?

[@owca6666]

+beueuehebedududhdh most if not all 4T 125 engines take 10w40 oil...

[@Firby1988]

When did K&N start getting made in China ?

[@ponhkunsambo]

Hey bro, what are the size of your tires? They seems pretty bigger than what i normally seen on ktm? Is it 120/60 front and 160/60 rear?

[@luczyn]

+Sambo Ponhkun It's in the FAQ: kzbin.info/www/bejne/hl7GmKRtjpmYbaMm50s

[@andrecanoso149]

+LucZyn I have a question My KTM mechanic, do this process exactly the same way you do, but in the end, after running the motorbike, he add again some engine oil. It's necessary? I dont know what's the correct level of engine oil in the Duke 125 screen

[@luczyn]

+André Canoso Consult the bike's manual if you don't know the basic stuff. It will help you immensly. Oil must be more or less the halfway. If it's too low you can add fresh oil anytime.

[@andrecanoso149]

Thank you! I have a Duke 125, i will read the manual to take out every doubts

[@abdulwahidalihazarika7007]

Bro where the leg guard will b available that u installed in your bike

[@matiasfranciscoiglesias6923]

muy bueno amigo !! thanks

[@samu7308]

What kind of oil did you use?

[@SunStrokeo]

Fill 1L of cheap oil and run the engine at idle for few minutes. Drain it and fill the proper oil. The colour of the oil will be too satisfying after filling.

[@ottochavarria5237]

Can I use the same filter and oil for my duke 200?

[@onyxreyes9395]

simple and clear :) nice helmet too haha what helmet is that sir?

[@luczyn]

+Onyx Reyes This one is Shark Vancore.

[@onyxreyes9395]

okay, thanks

[@NaderSirati]

Hi, very nice video, i really like the quality.Could you please tell me how many liters of oil should I fill in the engine when i change the filter too?

[@luczyn]

+Nader Sirati It's in the video :)

[@NaderSirati]

I have duke 200, is it 1.5L same as duke 125?

[@mheckmann96]

+Nader Sirati my englisch is not very good, but in my duke are 1.5 liter oil. i'll change it in the next days

[@iFulixzer]

The chain should we hot when you lube it ;)

[@luczyn]

no

[@gbner9991]

lel

[@logitechz3]

Indeed, take a short trip to warm the chain just before you lube it and then wipe the excess, use teflon white grease and its ready to ride

[@cr33py44]

I'm a mechanic, and yes it should.

[@kevinlopes137]

@@cr33py44 I'm a mechanic too, and indeed, it should.

[@redshoreisbatman]

Hi luczyn, my front spoiler can't be removed! The 4 bolts underneath can't be unscrewed ! Not sure what to do, can you help?

[@luczyn]

Matthew Q What do you mean by "can't be unscrewed" - you do not have enough strength to do it or they all spin in one place and do not come out?

[@redshoreisbatman]

LucZyn they spin in one place and do not come out! not sure what to do about it.

[@luczyn]

Matthew Q That means the thread might be damaged - you need to get small pliers and pull down while turning the screw. Once you get them out you need new screws.

[@redshoreisbatman]

Thank you! I will try that

[@stevep7837]

hi what size is the oil drain plug?

[@disfordelta3226]

I'm guessing this would work the same with the 690 duke as these bikes are basically built the same

[@azozazoz743]

Please I want the name of the music in the first video ☺️😊

[@matcin1984]

Nice work !!!

[@SlipknotFanNubBoy]

Cześć mam problem otóż nie mogę odkręcić 2 srub środkowych przy osłonie silnika, mogę kręcić godzinami i są wciąż w tym samym miejscu. Moto od nowości był raz w autoryzowanym serwisie ktm

[@luczyn]

***** Cześć! O których dokładnie śrubach mówisz? Pokaż fotkę albo wytłumacz jak możesz. Jeśli jakiekolwiek śruby kręcą Ci się w miejscu to jest to bardzo zły znak - uszkodzony gwint :-(

[@SlipknotFanNubBoy]

W tym filmiku przy zdejmowaniu osłony silnika opisałeś ze jest 6 srub 2 z przodu i 4 na dole. 2 po środku mi się nie odkręcają.

[@luczyn]

***** Mowa więc o dolnym spojlerze. Jeśli te śrubki kręcą się w kółko przy odkręcaniu i dokręcaniu (stoją w miejscu) to Panowie z serwisu zerwali gwint. Ktoś się dorwał na chama, co jest trochę dziwne skoro był tylko w serwisie ktm. Śruby trzeba usunąć i podjąć próbę skorygowania gwintów (nagwintowania), zależy jak bardzo jest zrypany oryginalny gwint.

[@XxJoshi13xX]

and how many litres need ?? 1? 2? 1.5? 1.2? please help!!

[@DroidEagle]

share more knowledgeable stuff so we can upgrade our bike with the best things

[@thomasbernard6901]

Thanks a lot

[@drewx420]

What kind of helmet is that? Nice to see a different full face with goggles instead of flip visor

[@luczyn]

Shark Vancore buddy xD kzbin.info/www/bejne/e4DUoIyOZdlmgc0m26s there you go!

[@freedomlife2286]

Could I use Motul 7100 4T 15w/50 to my duke 390?

[@luczyn]

+Phanthuleth XAYAVONG I don't see why not.

[@JoseMartinez-fr2bv]

Good video thanks,what is that helmet you have?

[@luczyn]

Jose Martinez Here you go: kzbin.info/www/bejne/hl7GmKRtjpmYbaMm28s

[@bamadhaj89]

What helmet are u using?? So cool

[@incursore9]

Shark Vancore

[@midhun-007]

Bro I broke the drain plug!! How much it will cost?

[@umutsafak7326]

Ktm duke 125 takes 1.5 liter oil?

[@MrJonttu_]

What oil u used?

[@shabeermoideen]

may i know which helmet you are using?

[@incursore9]

Shark Vancore

[@Medisin6RS]

How often do you oil change? is it like every 500km u run with it or something? ^^

[@luczyn]

Medisin6RS 500km? Hehe xD Then I would be changing oil every 1-2 weeks! More like 5-7 thousand kilometers :D

[@Medisin6RS]

Hahahaha :D alrighty :D sweet :) I'm new to motorcycles, wellwell... :) you learn by your mistakes :D thanks tho, and very nice vid, love the quality of ur vids , and you explain it so well!!

[@luczyn]

Medisin6RS No problem xD

[@Medisin6RS]

My friends are saying that there isnt alot of maintence whilst owning a duke, is this right?

[@luczyn]

Medisin6RS The same as any other motorcycle I would say :)

[@vedantbadekar6005]

HOW TO CHANGE BREAK OIL ??? FRONT BREAK

[@4DollaSignaken]

W.T.F. Vlogs BRAKE FLUID*

[@NGarcia]

What helmet are you using?

[@adrianjakowski5393]

N Garcia shark vancore

[@marianmarian4374]

there is another one filter under engine but i never replaced him

[@Momo33-n8g]

First name's song please?

[@mertcanayhan]

Castrol or motul for duke 125 ?

[@leksiig7725]

+mertcan ayhan castrol or motorex :)

[@mertcanayhan]

+leksiig speedol ?

[@gabirug]

Motul is better i think...

[@THEfindmaster]

Haha, after watching your video i was warned of the bad quality screws but somehow it broke :D how did you remove it? because i filled the oil after adjusting the screws 100%

[@luczyn]

i took a sharp needle and scraped it out by some miracle

[@THEfindmaster]

ok, thanks for the tip. ill try to do just that

[@makzorozco7900]

Tienes algún vídeo como. Poner los para manos

[@juicemixture1637]

Oil filter price tell me

[@azozazoz743]

Please help me I want the music name

[@sarathchelsea]

There is white smoke coming out in this video why is that ??

[@luczyn]

sarath chelsea It's evaporating water and moisture accumulated in the exhaust. Completely normal after just starting any the bike in cold conditions.

[@kjakkonrad]

Co on tak kopcił?

[@pranayeruva9046]

i want ur tool kit

[@hhhfffyugug8404]

♥♥♥

[@MrBlekzz]

how not to spend 700pln in ktm service ;) nice how to :)

[@audiophillicaudiophile4390]

🤫 does it mean it is more than 500zł labor charge? WTF?

[@hhhfffyugug8404]

love you

[@xls77]

the 390 have 2 oil drain plug

[@luczyn]

+Xavier León There is one more oil screen in the 390. Doesn't make the whole process any different in general.

[@gemtoy]

Great video but you didnt Changed the oil haha

[@luczyn]

Maybe try watching with opened eyes :)

[@gemtoy]

LucZyn hahah;) you only fill it up ?

[@luczyn]

no, you do not "only fill it up" - you need to perform every step presented in the video

[@rookfofo9394]

love you ^_^

[@andriuskalnikas4646]

165£ saved

[@malteskanal8888]

If anyone knows how to fix this: kzbin.info/www/bejne/hYLCg3yFbN56asU please reply

[@pranayeruva9046]

i want ur tool kit