Lure Handling System

[@SuperKabookie]

Great to see you back with your helpful techniques! Nice new workshop too!

[@SplishSplashFishing]

Cheri Doyle Nice too be back, and hopefully i'ĺl enter a more stable period now

[@bassgee2938]

Good to see you back at it. Shop looks efficient, like it!

[@mervynjamison870]

A great idea I make my own lead lures and have looking for ideas to make a rack for some time now but didn't quite know how to go about it thank you Splish Splash.

[@jonathanrittmeier4933]

Hey it is a verry nice and informativ Video. My question is absolut the thikness of the Alluminim for the Holder. Could you tell me how thick it is? 2mm Or even more? Tank you verry mutch for the great Videos you are produzing

[@rustyman351]

Thanks very much. Do you ever have lures fall out of the cpvc fittings while epoxying? I make heavy baits and scared they will do that.

[@SplishSplashFishing]

Never dropped a bait - The holders in the video are quite thight, and I think it should be a very heavy bait for it to drop out

[@marcinwozniacki5707]

Very creative, thanks for sharing ideas.

[@ARTISAN67]

Hi !! Thanks for sharing the post which I was waiting for a long time. I have issues while doing top coat as I do not have proper holders for lures. As a result the epoxy got into the holder or there were scratches on the bib even after putting masking taken. I am working on the difficult holder, almost through.The issue is with doom nuts with hole. I got doom nuts but they are without holes. And with holes they are not available locally nor on e-commercial portal. Could u please sharing your source of buying doom nuts with holes. Thanks, raghubir

[@SplishSplashFishing]

I just drill the hole. I think it's shown somewhere in the video.

[@ARTISAN67]

@@SplishSplashFishing thanks for reply, the one I got were steel doom nuts and got the holes done from outside vendor since normal drill does not work. Regards

[@ciosvisions4209]

im from indonesia. i love your chanel. thanks buddy. you are my ispirations. but in my country i cant get material for softplastic, glassbubbles, and polyurethene

[@TommyGunz327]

What kind of tubing is it and what kind of clips that hold the tubing onto the lure dryer are you using? What size and which ones? I’d like to get the same tubing and same clips to hold the tubing. Thanks

[@SplishSplashFishing]

Hi Tommy. It's tubing used for electrical cables. Pretty sure it is 1/2". And the clips are made for installing these tubes. Try to ask in your hardware store for clips and tubes. Diameter is less important than the fit of those two. Good luck

[@Rob-zq8sy]

Very informative as usual, thanks.

[@RadaLure]

Thank you, greta tips from you.

[@islandpunk3769]

Another fine video. The new shed/workshop/studio is looking fine.I hope you didn't sacrifice your vegetable plot to make room for it :)

[@SplishSplashFishing]

islandpunk Well it actually did take some of my gardening space, butit was a good trade for me

[@islandpunk3769]

I'm loosing the greenhouse, which has been used only for storage the last 5 years and getting a nice 5m x 4m metal shed later this year. So if your lucky you may have some competition ...... I don't think so

[@SplishSplashFishing]

islandpunk I won't mind the competion. A shed on 4*5 m is just like mine, and with a bit of organizing it will be great. Good luck with that

[@SuperKabookie]

Bummer I can't see your live feed in the USA

[@SplishSplashFishing]

Any idea why - Would hate if this was a general problem

[@SplishSplashFishing]

I found out why - As I had the radio running in the background the first couple of minutes, I got a copyright strike on some of the songs from the radio. This means I can't be shown in USA. I will try to get it fixed, and notify you if I succeed

[@SplishSplashFishing]

The Live session should be viewable in USA now as well (I think)

[@greatwhitesfishingadventur2273]

Thank you ... Very Informative .... "Down Under Mike"

[@allanknudsen7483]

Would you consider making metal lure (gennemløbere, blink) that you found/melt yourself?

[@SplishSplashFishing]

Plans for such a project already exist - Just hang in here

[@allanknudsen7483]

Perfect ;) would like to start up myself, so would be nice to see your ideas ;)

[@bojensen8051]

Hej Igen. Hvilken epoxy vil du anbefale som den bedste til kystwoblere? Jeg har brugt C&W lure epoxy og Pour-on Envirotex. Den sidste er lidt tyndere i det, men vil gerne lave bobler i lakken. Det er som om de opstår af sig selv under tørringen.

[@SplishSplashFishing]

Jeg har selv brugt Easy Composites Glass Cast epoxy. Den giver ligesom de andre du har haft fat i et dejligt tykt lag. Dog mener jeg at den er langt lettere at arbejde med end de to du nævner. Til kystwoblere kunne man dog godt vælge en tyndere epoxy, men den har jeg ikke lige fundet endnu

[@bojensen8051]

Er det Glasscast 3, 10 eller 50 du har brugt ?

[@SplishSplashFishing]

Ja de har ændret betegnelserne/lavet nye typer. GlassCast 3 er til coating, så det er den du skal bruge - De andre er til tykkere lag

[@bojensen8051]

Hej Splash splash. God informativ video og stor ros til det enkle design. Jeg kunne godt tænke mig at kopiere din drying rack, hvis det er OK. Den er meget enklere end min med runde skiver begge ender. Jeg kan max have 8 emner i den og indimellem for trang plads til at komme hele vejen rundt under lakeringen. Jeg har desuden et spørgsmål ang. dine gennemløbere. Hvordan monterer du dem i en holder før de lakeres? Er der wire i røret eller ? Jeg kunne forestille mig en bøjet blød tråd eller lignende.

[@SplishSplashFishing]

Jamen du kopierer bare derudaf - Det er jo hele ideen. Jeg kører et lidt andet setup til mine gennemløbere. Jeg trækker en kobbertråd og lader dem rotere i længderetningen. Du kan se det her: kzbin.info/www/bejne/rGGVlKt4o7yVpZIm25s

[@bojensen8051]

Tak for det. Jeg bruger lidt samme system, men i mindre skala. Jeg ledte efter en ide til at opskalere, så jeg kan lave lidt større batches ad gangen. Jeg tror det i første omgang bliver en træ-rack a la din. Jeg kan godt lide at de roterer om mere end kun længdeaksen og derfor skal have en større omdrejningsradius. Dvs at de skal monteres,så de vender på skrå i forhold til midterbjælken i racken.

[@SplishSplashFishing]

Den anden er faktisk noget lettere at lakere gennemløbere i, fordi de kan coates mens de sidder i "tørreren". Jeg skal bare lige have lavet den lidt mere driftsikkert end med de o-ringe der driver den i dag. Skal bare lige have bestilt hjem fra kina.

[@bojensen8051]

Hvor har du købt trisserne og hvordan er de monteret? Ligesådan med forbindelsen fra motorens overførsel til stativet ?

[@СЕРГЕЙСОБОЛЕВСКИЙ.Воблерыручно]

Привет ,жалко что нельзя включить субтитры .

[@rodneyjohnston6280]

I gave you thumbs down because the quality of your video I could not understand what you were talking about I have something to do with the room that you're in it sound like you're in a tunnel

[@SplishSplashFishing]

Thats fair enough and thanks for the comment to back it up. At this point the room was almost empty which gives tunnel-sound you hear. By now it's much better, but then I tried upgrading my GoPros, but the new cams have terrible mics. Next step will be a wireless wearable mic that hopefully will help a lot. Just saying that to let you know that I take it serious, and is doing my best to make it better. Hope you still find it worth to spend time seeing some of my other movies

[@SuperKabookie]

Great to see you back with your helpful techniques! Nice new workshop too!