Lure Making | New Spinner Blade Design

[@ely410]

Wow I’ve never seen this kind of design before. It looks like bait fish swimming through surface. Nice work

[@hectorpohu3116]

Saludos, se ve muy bien el diseño, lo voy a fabricar

[@adrianch2527]

Great idea n product. Well done. Hope to c a new video with a fish caught by this solid lure.

[@BerkskinBlackmon]

Very nice looks easy to make I give it 5 stars

[@TreysArt]

Thank you 🙏

[@주인장-d5j]

Nice!!!! Looks GOOOOOD!!!

[@scottwilson8208]

You are the most innovative, creative lure builder I’ve seen. Good work.

[@TreysArt]

Thank you 🙏

[@johnodell8601]

Perfect effect for Pike

[@benjavier8262]

Have you tried putting another blade inside perhaps smaller n more streamlined n diff color? Jus saying tho, thanks for sharing, tight lines🎣

[@TreysArt]

I haven’t tried that but it sounds like it would be pretty cool

[@MrCelestinoclemente]

Well done, I certainly will make one following your instructions and let you know the success. Thanks to show us.

[@taymot2131]

Great design! (reminds me of a windrotor). Top!

[@kurtkostein]

Cool idea.. I'll try to repeat!

[@timapple6586]

That action is absolutely amazing!! I have a '50's era lure that works on the same helical principle: it's made like a long flat willow-leaf spoon that has been twisted into a spiral. But it has no shaft, just a swivel at one end and a split ring at the other. Yours is a much better and more elegant design. I'm going to try making a tiny one for trout - but instead of running wire down the axis, I'm going to replace that with a section of a WD40 spray nozzle, blunt the ends with a Bic lighter, then thread it onto my leader, add a bobber-stop or a few beads, then tie on a fly, so I can cast the rig on a flyrod.

[@TreysArt]

Heck yeah that sounds like an awesome idea!

[@BeetleBuns]

I tried casting a similar spinner style on a fly rod once, my god it was a nightmare

[@carlitosjr2388]

nice creation ! looks like it will catch fish!

[@neiljones8269]

I have no doubt this will work a dream on the right day. Congrats 👏

[@zemi.j.28]

Nice ,good job👍....the birds are happy🙂

[@TreysArt]

Yeah man I love hearing the birds

[@massimilianoromani9271]

Good job!👍🏼never seen one like this. I’ll try

[@DrFrankensteam]

That has a very intriguing wiggle to it.

[@rwalden87]

Cool idea! Nice work!

[@roberthenderson6081]

Very cool love it

[@jackpanama2571]

Very smart! I will built it too know!

[@jackpanama2571]

Now i ment

[@elcenturion8940]

¡Felicitaciones! Excelente trabajo. Una pregunta ¿cuánto pesa? ¡¡Saludos desde Argentina!!

[@TreysArt]

I honestly am not sure on the weight. This video was from a while back.

[@stoklasajiri2426]

it's a really good idea because creating a simple rotating spinner so that it spins and also that it spins even if it is pulled slowly is definitely not easy.

[@valerasin3588]

Good jobs.iteresting idea.

[@wirinharwirjawan6422]

awesome and thanks for sharing

[@sam_ly]

inspiring 👍👍 I do a lot of lure fishing targeting snakeheads in my country, I think this will work.

[@lukelofgren4108]

That's a pretty sweet lure you made there. I've never seen that method. Your test tank is beautiful! I've always wanted a tank with different sunfish. They are prettier and way more fun to watch than the fish you get from stores. I'm making a couple kastmaster/spoons as Christmas gifts for coworkers right now made from solid brass. Making your own lures makes fishing that much more satisfying

[@TreysArt]

I agree. I’ve got to the point now to where I only want to use lures I’ve made lol. It’s so much more gratifying to catch one on something you made.

[@lukelofgren4108]

@@TreysArt I'll never forget the first fish I caught on a lure I made. I really wish we could post pictures in comments here on KZbin so we could all share between each other. I made the lure from a chunk of 2x4, a ball bearing and superglue. Things are different now. It seems KZbin brings like people together more than anything else. I love seeing what other people are making.

[@TreysArt]

That would be pretty awesome if photos could be shared through the comments.

[@lukelofgren4108]

Someone needs to have a chat with the KZbin big wigs and make that happen. Keep up the good work

[@Finnmark2013]

Great idea. Possible to put the lead/weight in the middle so spin around it instead? Would be perfect for seatrout.

[@TreysArt]

The weight would probably need to be glued in place to do that otherwise it would be resting on the blade which would make it hard for it to start spinning.

[@anderssvensk4317]

Like the design! Nice work 👏 👌 👍 Don't forget to wet the knot before you tighten it, then it won't slip.

[@mlspinningfly5404]

Good job man !!! Very nice and interesting action 👏🏻👏🏻👏🏻

[@domenicostaltari8654]

Bravissimo e si muove molto bene💯💢💢💯💯💢💥💥💥💢👍👍👍

[@Geno-d3i]

It's a Great idea, I am going to try it myself. But I was wondering what the thickness of the sheet metal was, how long is the blade that you cut out, what is the max weight that it can support, 1/2 once, 3/8 once,1/4 once? Could let me know?

[@TreysArt]

The only thing I remember from making this was that the sheet metal I used was 1mm stainless steel. Everything else was guess work.

[@topmario14]

I've had other BPM baits kzbin.infoUgkxCbNOWAGmn6nfbCbJDmasvBq7J38KZNw2 before and they've pretty much always came through for me with the suskie smallies here and even with the walleye and pike, but I realized I didn't have an "in-between" pattern so this junebug one fills that role in no problem. it pairs up magnificently with a junebug Zoom Z-craw Jr that was trimmed a couple millimeters before the hook slots and rigged sideways for that fatter panfish side profile while still being a nice'n'compact presentation, a real power-finesse bait. Hell, it was so pretty I even bothered to fotosketch the pic into a watercolor painting image just to show you it's beauty! Even the blades are really well made, sure, they're not of Hildebrandt-level exquisiteness but look at the bead's reflection on the colorado blade, definitely well-made! The only "problem" spot it had was a bald spot in the skirt but it was nothing that I couldn't easily fix with a but of tuggin'n'shiftin' with the strands for a couple of seconds, besides that it is pretty minty!

[@davidnelsen9971]

I would put a bead between the blade and the body weight. Interesting design.

[@TheADDFiles-yk4dc]

Outside the box thinking. Well done.

[@TreysArt]

Thank you

[@glennkrzeminski7539]

I feel like I’ve seen spoons wobble like this before, Johnson, Crippled Herring, maybe not as fast. Has it proved to be worth the work?

[@TreysArt]

I honestly haven’t fished with it much since I made it. I do feel like it would be an easy design to manufacture. Not sure how worth it, it would be for the everyday fisherman to actually build one themselves though.

[@FrenchCrow]

Nice action, it looks very "alive". Very inspiring, thanks for sharing.

[@labtrainer09]

Hi, Trey. I don't know how I missed this one, but because I have become interested in spinner-blade designs, I just watched it. Twice.The pronounced wobble you describe is definitely there, and I can see it clearly in the streamer-like trailer. Wow. Now, of course, I want to make several of these and wonder if you'd be willing to share just a couple of dimensions: How thick was the steel you used? What were the length and width of your prototype? I would really appreciate your help because-unless my eyes are deceiving me-your design imparts significantly more action than the standard French blades used in most in-line spinners. Hope you continued your experimentation and will share

[@TreysArt]

I actually haven’t done anymore testing with that one unfortunately. It’s been a while and I don’t remember all the stats on it, it was a stainless steel backsplash I repurposed and was prob about 1mm thick and I believe the design I cut out was roughly 2” inches.

[@labtrainer09]

@@TreysArt Thanks for trying. I'll give it a shot, based on your educated guesses. Call me crazy, but I think you were onto something with this blade design.

[@1987barbar]

Love it

[@AngeloFerreira-mt8wm]

Parabéns gostei ficou top tatuagem nota 10

[@williamkrejca4641]

Very interesting. My thoughts:1. Use of a lighter weight could result in ability to have a slower retrieve; 2. Apply a 60 degree bend in the forward eye to maybe reduce line twist. I like the action.

[@TreysArt]

Very good ideas. When I eventually revisit this one I will definitely be trying those out. 👍🏼

[@nizamamana8313]

Nc work mate

[@dabanditz28]

Cool design, catch anything with it yet?

[@TreysArt]

I haven’t used it in a while but I did catch a smaller bass with it

[@jenniferwhite6089]

great video i build mine from brass and bronze when i go and buy bronze too I do mark and drill my hole first in the metal and do use a metal bead between the weight and blade to make hollow core weights thin to put a bead before the blade and one after the blade to i glue that on in place after a done make the lure the weight than the other in of the blade then finish twisting the wire paint the weight with a glow in the dark paint too to

[@TreysArt]

Sounds great and kinda complicated lol but I got what you were saying I think.

[@mauricebrown9094]

A very cool design Pal. So much movement in the water. Are you selling this design yet?? are you having them Chromed? Where can I purchase a few.?? What colors do you have them in??

[@TreysArt]

I’m working on making them available. It’s slow going at the moment and No I don’t have any way to chrome them. I’ll have to experiment with using foil because their weight has to be just right.

[@рыбакприморья-ф9г]

Отличное решение👍 надо таких тоже сделать.

[@ТАРАСРВАЧЕВ]

Согласен, достаточно оригинально но саму пластину лучше сделать из латуни и поставить пару бусин отражателей.

[@alphaviking_KSNgroup]

хе хе как то мимо цеха токарного шёл и глянул стружку и попалась очень похожая (нерж.) от чего-то отпиленная. я её в руки беру ну на вид как полу-готовая блесна. Забрал её к себе, просверлил с верху и с низу кольца попустил, в отверстия с низу тройник, а сверху кольцо под карабин лаком покрыл и готово, ещё не пробовал. 🤣🤣 и эту блесну из видео тоже можно изготовить, очень даже "оригинальн'ика" колец ещё из стальной проволоки накрутить про запас.

[@рыбакприморья-ф9г]

@@alphaviking_KSNgroup да да, случалось рыбачить на тесаком вырубленый кусок от консервной банки от тушонки прямо там на берегу таёжной речки у костра, 😆

[@RubensLuiz96]

Muito legal, a isca ainda ficou com um nado diferente.

[@pagisubuh]

will try do this lure for giant snake here in Malaysia.

[@kubr60]

прикольно, надо попробовать

[@stevetilk4926]

I have some scrap copper tubing that I have pounded flat for making spinner blades. Would copper work for your lure or do you think it might be too light?

[@TreysArt]

I think it would work as long as it’s not load bearing like a chatterbait blade would be. Only thing is that copper would oxides over time kinda like green rust. With that said I haven’t tried it myself. I would say give it a shot. Even if it don’t work out you’ll learn something from it.

[@jenniferwhite6089]

why you can make lures from the tubing to think outside the box too

[@jenniferwhite6089]

soup cans work awesome too table fork or a spoon handle does work to

[@alphaviking_KSNgroup]

в принципе можно и медный "лепесток" сделать , как вариант покрыть его лаком, чтоб дольше прослужил и отверстия под проволочку залудить припоем тут уже лак не нужен в местах лужения. 😅это если другого материала нет или нет желания искать. может быть медный у себя попробую как настроенье будет!

[@koyofishing]

Sangat keren kawan 👍

[@wayned5872]

Nice idea now i know what im gona do with that piece of polished stainless steel ive got hidden away at work🤣🤣

[@TreysArt]

Nice 👌🏼

[@zeljkodejanovic8786]

What bullet did you use?

[@TreysArt]

It was a brass worm weight.

[@barretharms655]

This is my very first time watching you make a lure however I've been asking everybody who makes lures to do this thank you thank you thank you thank you thank you I have seven different kinds of spinner blades and nobody can explain to me how to use any of them except for the willow the Colorado and the Indiana I'm sitting here going Tomahawk split-tail corkscrew smiley propeller Serpentine and oh yeah the gang Spinners like -3 on 4 I believe it's called a spinner with a trailer no that would be a spoon with a spinner sorry and it's one two or three Spinners on a spoon but I did figure out the double Indiana is for ice fishing and I believe there is also a wobble disc it's like a ChatterBait except that it starts immediately and is good for ice fishing or reeling. Anyways I really want to know because I got all grandpa's tackle but no instructions so I'm getting instructions for what they will show on KZbin but I would like to watch to see how some of the other stuff that is built and it works and no I'm sorry I'm actually giving names to a lot of those things because I can find absolutely nothing about most of the metal plates that I have in the tackle box. So I'm asking you because you're the first state maker that is actually using metal plate.

[@TreysArt]

I’m really not too sure without seeing them. My best advice would be to experiment with them and see what you can get them to do. Idk all the other type of spinner blades or what they are called either. I just usually fiddle with stuff til I can get it to do what I want it to lol

[@onefishonedream6448]

small format video .. in this time. is it a new concept ? otherwise, always a nice job. great and original design !

[@TreysArt]

Yeah just trying different stuff

[@TRICOTSTRICOTS]

Looks good !!! Did you have any line twist ?

[@TreysArt]

I didn’t notice any. If there was it was slight.

[@TRICOTSTRICOTS]

@@TreysArt outstanding!!!

[@ЮрийКомарь-ж3х]

А шнур закручевается ?

[@TreysArt]

It does some but not much.

[@AntonMoquin-vg1sy]

Id put some colorful beads in-between the blades ends

[@TreysArt]

Good idea 👍🏼

[@eduardovieiradeazevedoviei7558]

What is the number of the Lead you are using there

[@TreysArt]

I believe it was .25 oz brass worm weight

[@eduardovieiradeazevedoviei7558]

@@TreysArt Thank you

[@buchabucha2707]

Прикольно.какой вес у блесны?🐟

[@TreysArt]

I don’t know the weight of the whole thing but the brass weight I added was 1/4oz

[@buchabucha2707]

Спс бро

[@mchtzn]

Very nice job! Got any fish with it?

[@TreysArt]

Thank you. Now I haven’t even tried it again since I made it. Been pretty busy lately. Hopefully I’ll be able to get out and fish soon.

[@mchtzn]

@@TreysArt spring and fishing time is coming. Hope you will post a video with that spinner catching fishes. Take care.

[@muhammadza5349]

hi! can i know the thickness of the blade? thanks!🙂

[@TreysArt]

Sorry I don’t actually know the thickness and I don’t have a gauge to check. If I had to guess I’d say about .5mm

[@muhammadza5349]

@@TreysArt that will help. THANKS

[@robertmceuen3630]

Wow! Looks easy. Is smart as heck. Great craftsmanship and creativity!

[@TreysArt]

Thank you

[@ericwilliams8504]

My grandpa had lures exactly the same!... they used to be quite common.

[@TreysArt]

That’s cool I wish I could find an old one

[@nauz7368]

How much would you charge for one of these?

[@TreysArt]

I don’t sell them.

[@christophersvanberg7287]

Exciting design! Maybe add a lightweight swivel between the lure & mainline to prevent twisting. I like it 👍👍

[@Welinkar]

Unique design, very innovative. Going to make one myself to check out its action . Thanks for sharing. Tight lines and fish on 👍

[@barretharms655]

He ther Looy looks kind of screwy definitely a spinnerbait I like it. 👍 roostertail

[@fabiostrogulski9262]

São pardais vocalizando?

[@joranpalaranchannel9320]

kalau dipake umpan atas bisa kah hu

[@TreysArt]

I don’t understand your question

[@djoleat]

😊

[@ЮрийКомарь-ж3х]

Меченьій ?

[@АркадийПрожерин-ж3и]

👏

[@АлександрОстринский-т1с]

🔥💪👍🏼🍻

[@dave3130]

Must admit it's easier to buy one

[@TreysArt]

Your not wrong there

[@FrenchCrow]

Easier yet less satisfying...

[@dossantos5890]

👍👆🔥🐟

[@scjudson1957]

Very cool but didn't catch anything.

[@TreysArt]

🤷🏻‍♂️

[@АнатолийИ-м2ч]

👍++ ++ ++ ++ ++ ++ ++ ++ ++ ++

[@eugenegress5896]

I see no reason why this would not Work , on Bass, Pike, ect. a mini version would be fun to cast in rivers for Rainbow Trout.

[@TreysArt]

Not a bad idea. I think I’m going to make a mini one now

[@eugenegress5896]

@@TreysArt Good on ya, can't wait to she the Trout Hammer.

[@julijanmagda7855]

Simply is always beter...

[@davidlaughlin5606]

...Dang buddy you better be filling a patent order ....you didn't invent the spinner just a different version..... Hurry

[@TreysArt]

Basically no point when it comes to fishing lures. The slightest little detail can be changed and a patent won’t protect anything 🤷🏻‍♂️

[@LeviVanSluijs]

Hi

[@TreysArt]

Yo

[@LeviVanSluijs]

@@TreysArt hello

[@TreysArt]

😮

[@LeviVanSluijs]

@@TreysArt 😯

[@Chasta3]

ミノーが動いているように見える。

[@СергейНижник-ю9т]

Как всегда без процесса рыбалки .

[@TreysArt]

Sorry I try to get video actually fishing with most of my lure videos.

[@철이-s2v]

생각처럼 잘안됨

[@TreysArt]

Well thanks I guess

[@ПетрПримиренко]

Тебе такими руками жрать не противно ?

[@TreysArt]

No I like my hands

[@ОлегСолдатов-ь1ф]

Весь в мастях, походу сидел ?🤔

[@TreysArt]

Huh?

[@ОлегСолдатов-ь1ф]

Это русский сленг, обозначает : весь в татуировках наверно в тюрьме сидел.

[@TreysArt]

Хорошо, я вижу. нет, я был бывшим татуировщиком.

[@ОлегСолдатов-ь1ф]

@@TreysArt А, понятно.😊 Хорошая приманка получилась 🤝 Привет из Белоруссии 🇧🇾

[@TreysArt]

Спасибо 🙏

[@calhiser8265]

Just trying to catch fishermen? Do fish eat it? Bla bla bla.

[@TreysArt]

Just being creative bud

[@syavagor]

kzbin.info_N3iVyy7Gis Не тем я занят. Сделаю как у вас.