Lure Painting : Finishing a lure with resin.

[@808bAler]

I learned a few things watching this, buddy, great work.

[@LucioYChristinasCookingShow]

808bAler thanks for watching

[@AnglerSeulangaMVA6891]

Good Lure Bro... 👍 Is The Best 👌

[@Rwatts1026]

This is so cool and looks like a lot of fun to make!

[@piratadasmoitas]

excellent video, congratulations, can you please tell me where you bought this small motor and how you connect it to make it work, I would like to make a rotating system like that, thank you

[@jakealboroto9461]

hi sir may i know what type of paint you use and what mixing colour you use on the emerald green the one you did with the brush..

[@AggelosDRZ]

Hey, Could you please tell me all the materials that you have used to do this :) thanks

[@OutDoorHuntCro]

7:50 is that foil for nails?

[@TheBlackicehunter]

Nice job. But whats that foil decalc wrap that you are using? Thanks

So when do we get to the "Lure Painting: Finishing a lure with resin" part?

[@uncleheffe309]

Great color. Believe it or not, it is almost identical to the color on the back of Hybrid stripers. Deadly to say the least.( i.e. Bubba Shad Ghost Minnow 7-9")

[@LucioYChristinasCookingShow]

Heffrey Howers thanks for watching

[@MannyCamRS]

Good job. Can you tell me where I can find the carving knife you use at 4:18.

[@LucioYChristinasCookingShow]

Manuel Saldivar. You can get them on Amazon this one is a right handed single bevel Japanese carving knife.

[@LucioYChristinasCookingShow]

it was , it definitely was harder than the rest but not as hard as the one hanging on your key chain

[@ivanbl4001]

Show de trabalho,Boa noite qual o nome desse adesivo ou papel q gruda metálico

[@FishNFoolLures]

Where can i find the holographic foil he is using here at 7:54

[@LucioYChristinasCookingShow]

FishNFoolLures I get it at joansfabric store and it's called Minc foil

[@Tdnerehb]

Surprised to see you didn’t set a through wire.

[@JuniorSilva-fn5pz]

WHAT IS THE SIZE AND HOW MANY GRAMS DOES THIS FRIEND BAIT HAVE?

[@antonio999us]

Hello FishingInstinct Greetings from Peru.... I like to do my own lures as well. I watched your videos and they are great. Would you please tell me where did you buy your Holographic Foil Transfer roll??? You can't imagine how many places I have tried to find it. In Amazon, I found some for but it is not the same. They are small mini rolls and they are used for girl nails. The one that you are using is what I was trying to get. Thank you in advanced, Antonio

[@LucioYChristinasCookingShow]

Hello Antonia And greeting to from Los Estados Unidos ....the Holographic Roll that you see took a long time to find as well , I found the one that I use at a hobby store known as Michaels' Craft store , you can find it online and compared to other options I have used its very inexpensive and yields a fair amount .

[@antonio999us]

Hello ... I know Michaels' Craft stores well. Every time that my wife go to the USA she buys special paper and stuffs like that for her gifts. I have visited their web site before, but I never found Holographic Foil Transfer rolls. I have many holograms foils, but they are self glued, like a sticker. The foil transfer is great because it adapts perfectly to the shape of your lure´s curves. On the other side, the self glued one, always try to keep their original flat shape. I need to get those rolls...hahahaha... regards and thank you, Antonio

[@TrensdePesca]

Canal Trens de Pesca - SP - Parabéns pelo trabalho que faz!

[@mkdenton1214]

Where did you buy the holographic sheet? Can you send me the link? . Thanks .... great video 👍👍👍 like for you!

[@marioarturonunezayala3626]

Donde compras la calcamonia que le pones al señuelo y como se puso de

[@LucioYChristinasCookingShow]

Muchas gracias por viendo y son dos cosas , masking the aluminio para ductos y film Minc.

[@marioarturonunezayala3626]

@@LucioYChristinasCookingShow excelente , la cinta de aluminio si la uso para mis señuelos pero el film minc no lo conocía ; lo buscaré . Muchas gracias

[@alexgeorgalis]

Hi, what are you using as rotator and where could i find one? It's small and convenient.

[@LucioYChristinasCookingShow]

alex georgalis I think it was from an old rotating night light for children and the rest was just a few extra pieces of wood I had laying around

[@alexgeorgalis]

Lol this is what i suspected. Good idea and good job. thanks for your help

[@LucioYChristinasCookingShow]

alex georgalis no problem subscribe if you haven't already I have a few new things to show

[@botyokyok9623]

great video sir!.....what clear epoxy resin did u used sir? any 3-5minutes clear epoxy will work in finishing the lure? just asking sir.....many thanks....cheers!!!!

[@Abi21mac]

Hello. Great job. I watch your videos and I have a question about the tunable dryer motor you use. What's the RPM I need to order one online but I don't know what rpm should I order.

[@LucioYChristinasCookingShow]

Angel Vega wheel I think the one I use us 6 tpm but if toy can get one that turns 1.5 turns per minute is actually the best, if you can't find one just look for disco globe motors.

[@massimilianodematteo5136]

hi, I can ask you where you buy those disposable brushes. They are unobtainable. Thank you

[@LucioYChristinasCookingShow]

Massimiliano De Matteo they are horse hair flux brushes and they sell a pack of them on Amazon for a few bucks

[@massimilianodematteo5136]

FishingInstinctsSRQ thanks, would you give me the references in inches?I saw that those you are quite covering even the stick bait....

[@imamandra1325]

Menit 8:24 itu stiker 3D nya kok bisa nempel di kasih apa bang 🙏

[@clementcornaille5167]

what holographic foil do you use ?

[@1DesertCop]

Where did you get the holographic film,is it a secret

[@LucioYChristinasCookingShow]

It's made its known as holographic foil by Minc

[@1DesertCop]

thks

[@Az2FL]

great looking lure! what did you use as a top coat if you don't mind me asking?

[@Az2FL]

OK thanks! subbed to your channel!

[@aspeli4030]

FishingInstinctsSRQ I don't see nowhere 15 min.May be 5min...

[@mohonismokodompis2134]

6:40 what is it? pleasee..

[@bubamara8920]

aluminium(kitchen) foil

[@ahmedeldesoky1892]

greetings from egypt , i liked your work and have couple of questins , is that foil designed to be adherent to a glued surface ? so when you remove the transparant surface the other one is losely adherent , in other words , is it a steker without glue ? or just normal foil ? if it is could you please give me its trade name coz i wanna make my own fishing tools . wish you all the best , you have my support

[@LucioYChristinasCookingShow]

Greetings from Florida, the foil in question is a holographic transfer foil, I'm not sure if its a sticker but when you apply it to anny surface that has an adhesive on it, it will transfer abs I bought it from a store called Joan's Fabrics and its called Minc here is the website www.heidiswapp.com/minc

[@ahmedeldesoky1892]

thank you :) about the adhesive material , is it the same that glue concrete ? or this is another type ? and finally , the coloring material ! what is its type which make it glisating ?

[@LucioYChristinasCookingShow]

for the lure body I used gel superglue gorilla brand . the aluminium tape has a backing of specific glue already ,to transfer the hologram to the aluminium it is the rubber cement ,and the coloring comes from a mixture of green acrylic paint and 15 minute epoxy .

[@ahmedeldesoky1892]

well , i have 2 questions , about the eboxy , how it is cleaned oug of the brush ? and do you use it while it is thick vicid material ar add some liqueds to it ?

[@LucioYChristinasCookingShow]

ahmed el-shahat well the type of epoxy that I used for the finish is for encasing ,you really can't clean the epoxy from the brush which is why I use horse hair flux brushes they sell then about 60 for a few dollars.

[@haithamelzekred]

very good ☺

[@conexaoaustralia6349]

Amazing job mate!!!! what is this metallic material you have used at te end?

[@LucioYChristinasCookingShow]

it's a mixture of aluminum tape, and a holographic foil known as Minc, they sell the take at any store, Walmart, home depot, and the holography is sold at Joan's Fabrics

[@conexaoaustralia6349]

+FishingInstinctsSRQ I am trying to find something like aluminum foil, but ticker. Hard to find here :(

[@LucioYChristinasCookingShow]

+Conexão Austrália the industrial aluminum Duct Tape which is what you saw combined with the Minc holograph foil is about 5.5 mil thick. but anny thicker than that I don't think you'll find.

[@migs671]

What is the blue paint I love it Do you have the name of it

[@LucioYChristinasCookingShow]

Miguel Ayuyu it's just regular green acrylic paint I mixed with epoxy

[@migs671]

FishingInstinctsSRQ amazing thank you for your reply is there a certain brand you like or do you just purchase from craft stores

[@zzz7zzz9]

blue?? might want to adjust the colour contrast on your screen.

[@matteofallovo]

Ciao che legno hai utilizzato??

[@musakaraoglan6848]

salutations from turkey, what is the epoxy brand you are using

[@LucioYChristinasCookingShow]

Musa Karaoğlan I use marine grade epoxy

[@musakaraoglan6848]

thank you. I use seawater epoxy, but it makes the hologram that I use dull. The hologram I use is for women to nail

[@LucioYChristinasCookingShow]

Musa Karaoğlan get Minc holographic foil, you can get it online

[@musakaraoglan6848]

thank you

[@mohonismokodompis2134]

7:56 what is it??

[@bubamara8920]

holographic foil

[@michaeljames9389]

thanks for posting the great videos ! quick question... what is the knife you are using to carve the lure ? it looks like a specialty knife rather than a regular utility knife. :)

[@LucioYChristinasCookingShow]

Michael James It's a Japanese right handed single beveled knife, by farvthe best I've used you can get them from Amazon

[@paaydoank5150]

#MantapGaessS

[@apollonios1b]

how i can build this rotating machine?

[@LucioYChristinasCookingShow]

apektos t its very simple all you neef is three pieces of wood two at 5-6 inches and the base at 10 inches, I will be posting a build video for the rotating rack soon.

[@apollonios1b]

check your email thanks :)

[@michaeljames9389]

awesome thanks for the quick reply :)

[@robtresino4791]

Urgent question: I've applied Envirotex two-part resins to some spinnerbait heads, but it was a bad mix and the lures are semi-soft after a day of drying. Is it possible to try again, by putting a layer of correctly mixed resin on top of the first coat that didn't fully harden?

[@LucioYChristinasCookingShow]

The main problem is that you would have a hard resin shell on top of a soft resin body meaning that if a toothy finish bites it may take the finish off. But try it and find out that's really the only way to know for sure.

[@dnumdug]

Hi, where did you get that foil?

[@dnumdug]

Aha, found it :-)

[@LucioYChristinasCookingShow]

+Gudmund Malones did you find it through Michael's craft store??

[@dnumdug]

I ment I found the answer below my question... But couldn't find on net.. Can you post a link??

[@LucioYChristinasCookingShow]

+Gudmund Malones www.michaels.com/celebrate-it-holographic-roll-wrap-silver/10227473.html#q=Holograph&start=3

[@francoisa5928]

Are you sure it's the right foil? I went to Michaels and bought exactly what you put in the link, but it does not work. The holographic film does not stick to the lure. (I also used the same glue).

[@dewakumara2601]

Bang mohon nanyak🙏🙏dmna blo cat sperti itu bang

[@LucioYChristinasCookingShow]

Dewa Kumara penerjemah yang saya gunakan tidak berfungsi dengan baik, dapatkah Anda mengatakan hal yang sama dengan cara yang berbeda dan terima kasih telah menonton

[@ozazizu]

@@LucioYChristinasCookingShow : He answered you about the paint (or in this case coloured resin) that you are using. Where you buy it? Direct translation: "Bro, if i may ask, where you buy the paint?"

[@LucioYChristinasCookingShow]

@@ozazizu the paint is regular acrylic paint I bought at a hobby store mixed with 15 min epoxy

[@sandrobefishin]

can you paint any of my lures?

[@LucioYChristinasCookingShow]

Sandro Mclean I don't see why not, here is my email [e-mail] we can talk more about it there.

[@kirkwesterveltoutdoors]

If you cut out the music, and explained what it is you are doing you would attract more subscribers. very hard to watch.

[@ChronicTom23]

All that work and you left the bottom like that...smh

[@LucioYChristinasCookingShow]

ChronicTom23 I like how it came out and didn't feel the need to color it like other lures that's why I made it.

[@jamesortegajr5720]

Bro you do all of that work and leave the belly white? 🤦