TOOTH OF THE ARROW 2 BLADE SINGLE BEVEL Broadhead Test

[@nathanlester5054]

TOTA makes great broadheads and this one would probably do well on feral hogs. I was impressed with the overall design and performance. Great Job on Testing!

[@LuskArcheryAdventures]

Thank you

[@C42WatChe42C]

I love your channel and I hope you never stop making these videos!!!! I NEVER buy a broadhead without going to your channel first to guide me!

[@LuskArcheryAdventures]

Thank you so much for sharing that! Please share the vids with your friends :)

[@Austinb2225]

Got to get your hands on bowmar beast broadheads would love to see your input

[@LuskArcheryAdventures]

Just finished testing them. Vid is dropping Oct 12 at 5pm CST.

[@blessedvetoutdoors]

I have bern eyeballing these puppies since they were first released! Thank you for sharing your insights on these heads. If the Lord is willing, I'm going to grab several this season. I don't think I'll have a need for another head unless I were just wanting to experiment. God bless you sir.

[@LuskArcheryAdventures]

:)

[@chrisfitch2905]

I love the idea of this head, but 1" is a little to small for my taste. I used a crimson talon clever on a doe yesterday. It was a high double lung hit and she went down fast. That is also a small head and I am not sure if 1/16" makes a difference or not but in my mind it does! I would love to see this head made 1 1/4" wide! Great job once again.

[@RngrfromtheMtns]

same...I switched to clevers from Magnus Stingers and wish they were a bit wider. I'm considering the crocs though they also seem too wide. 1-1/4 seems to be where I want to be for cutting diameter

[@LuskArcheryAdventures]

Yeah, I feel the same, Chris. When I think of the difference 1/16" makes, I consider it this way: How would I feel about a 1/16" wide razor cutting thru my body? Every little bit makes a difference.

[@chrisfitch2905]

Shot another doe this morning, used the exact same arrow and broadhead. 20 yard shot double lung. she only made it 45 yards. No blood trail found, but I was hunting from the ground. That usually makes for a tough trail with any head. Overall I like the cleavers but I really do want one in 1 1/4" cut LOL.@@LuskArcheryAdventures

[@chrismuhlbeier6948]

@@LuskArcheryAdventures 100%. I like to think of it as a percentage - 1/16" more on this head is 12.5% more cut. Their 4b is nearly the same thing as shooting the animal twice in the same spot rotated 90. The rotation counts for something though - though to quantify in real life. I'd be interested to see how much John sees in Hogs, etc.

[@frankbrowning328]

A very impressive design for use on heavy boned large game. The heavy rotation helps equalize the smaller cut diameter

[@LuskArcheryAdventures]

Thanks Frank.

[@matthewyu3531]

Thank you very much! Your tests really helped me a lot.

[@LuskArcheryAdventures]

Glad to hear that!

[@JohnTomasella]

I use the 4 blade. Just lost another arrow this week. It goes through the deer so fast the arrow just keeps going.

[@LuskArcheryAdventures]

Yeah, I've done the same. I like the XL for deer.

[@jakemcdonald97]

Got 3 of these ordered. My primary complaints with a variety of heads I’ve shot is that they are noisy in flight, and they are not shooting with my field tips. High hopes for these being a very simple and very effective option.

[@LuskArcheryAdventures]

Good luck. Let me know how they work for you.

[@davidgreer9567]

I love their broadheads. My 4 blade were not up to my standards for sharpness either But after i used their sharpener they got very sharp. I think I'll keep the extra cut size for my hunting but a great broadhead. Thanks for sharing another great review and happy hunting John

[@LuskArcheryAdventures]

Thanks David.

[@chrismuhlbeier6948]

The Innovative Sportsman sharpener is much better.

[@nadineherrell5426]

Good show and review. Michael Herrell

[@LuskArcheryAdventures]

Thank you!

[@vfonte218]

Great video again . John there was a company that made a similar head way back and i had them and killed a buck with them. They were also 1inch cut with a wedge shaped chisel front! I saw them at the ATA show and what impressed me was there were hammering them into steel pipe! I hit that buck perfect at 17 yards and it expected him to go 20 yards but he made it over 100! One inch with a single blade is a no go for me. I will try to see if i can find the head and at least send you a picture of it!

[@LuskArcheryAdventures]

Thanks for the comment.

[@dzpdave1649]

Another awesome video. I was wondering if you have seen that new broadhead from that Bowmar hunter called Beast broadheads. It looks cool but I don't even think of buying a broadhead until I see you test it and hear your thoughts.

[@LuskArcheryAdventures]

Just finished testing them. Vid is dropping Oct 12 at 5pm CST.

[@dzpdave1649]

@@LuskArcheryAdventures Can't wait, Thanks

[@butleroutdoors2188]

Definitely a great option if your goal is durability and penetration!

[@LuskArcheryAdventures]

Yep.

[@gregmeisner775]

Broadside on a bear- what would you you favor for TOOTH OF THE ARROW: - 2 blade 125 gr 1” cut -4 blade vented 125 gr 1” cut ? Great video as always!

[@LuskArcheryAdventures]

4 blade XL

[@BacklashTV-gu3rc]

This will be my head for elk next year!!!thanks for the review!

[@LuskArcheryAdventures]

Nice. Good luck.

[@bobhendren9843]

Thanks for the review! Really tempted to pick up a package of these, could be ideal on elk and moose. Only concerns I have is the potential lack of blood trail with the small cut size and the lack of forgiveness if you make a marginal hit.

[@LuskArcheryAdventures]

Yeah, it's not too difficult for fat and tissue to plug up a little hole like that.

[@nationoutdoors9629]

Would be interesting to see what the sharpness is of the surviving broadheads after the concrete test!!

[@LuskArcheryAdventures]

Yeah, most of them won't cut the wire, but just break if off the posts...cause they've already gone thru the MDF 3 times and sheet metal 2 times...and into the target each of those times as well. Then the concrete.

[@-lovefromnh]

It would be cool if they just added one or two blades keeping that same design. Awesome!

[@LuskArcheryAdventures]

Well, that's kind of their 4 blade model :)

[@-lovefromnh]

@LuskArcheryAdventures just not as robust though.

[@timbow50]

I also believe on like. 60# bow the penetration factor would be great. Better have great shot placement though or may never seen that deer or little piggy again.

[@LuskArcheryAdventures]

Yep.

[@progradepainting3755]

Off subject: we need to see the lusk test on the new “beast broadhead”. Keeping my fingers crossed for that one…..

[@LuskArcheryAdventures]

Just finished testing it. It’s dropping Oct 11 at 5pm CST. Pls spread the word.

[@progradepainting3755]

@@LuskArcheryAdventures sweet!

[@drewriggs812]

That would make a great elk head.

[@LuskArcheryAdventures]

Could be...if you need that extra penetration vs cut size.

[@ozark_trapper]

I been waiting on this since. I told u about them. My crossbow shoots the 100 gr vent xl broadhead good. I want to goto a solid broadhead. Like the 100 gr solid or the solid xl. But i been looking at these since they came out. My crossbow shoot 400 fps . I seen a few test where a blade broke off. On the vent models. I bought some knock offs. Of the 100 gr ozcut 2 blade fixed blade. Didnt read too close on them. I had to sharpen them. 100 gr was that way. My crossbow shooting a 465 gr arrow/broadhead setup. Has alot of KE in it. Would u just stick with the 4 blade ? Or try these out? I know they should punch through a deer shoulder up close. But i was looking for broadhead. To use on deer and hogs. Only thing i dont like is the 1 inch cut.

[@LuskArcheryAdventures]

For a crossbow, I'd use a much larger cutting head, like a TOTA Solid XL or a tough mechanical.

[@ozark_trapper]

@@LuskArcheryAdventures i wanted too use the S XL. But the guys at TOTA broadheads. Said it wouldn't shoot out of a crossbow. So i went too the vent xl. But he said it would shoot the regular S model in the 1 inch.

[@ammoiscurrency5706]

Have you ever done testing on the classic muzzy 3 blade 100gr?

[@bbbbbbb2357]

Would love to see this test! Muzzy is the original durable head!

[@LuskArcheryAdventures]

Yeah, I finished the vid. It's scheduled to post in a few weeks.

[@bbbbbbb2357]

@@LuskArcheryAdventures thanks man your work is greatly appreciated!

[@ammoiscurrency5706]

@@LuskArcheryAdventures Awesome! Thank you, these tests have been really informative.

[@zakarybarclay999]

I'm gonna get some.

[@LuskArcheryAdventures]

Good deal.

[@bradlauber9097]

Nice looking broadhead but I like my cheap Chinese OZ CUT look a like two blade double edge. 150 grain one inch and one eighth cut. Takes deer out just as good and pretty good bloodtrails. I can get them razor sharp..

[@LuskArcheryAdventures]

:)

[@littlewoody5539]

Flying chisel .

[@LuskArcheryAdventures]

Right on.

[@deanbrantley]

65 layers has to be the new high?

[@LuskArcheryAdventures]

Naw, the Tooth of the Arrow 1" 4 blade got 70 or 72, I can't remember. But it's still really good.

[@elncalls]

Stout little bugger there!

[@LuskArcheryAdventures]

Right?

[@yourmomma2995]

looks like it would be a good choice for XL big game animals in africa.

[@LuskArcheryAdventures]

Yeah, could be...especially if they make a heavier model.

[@gavinsmitty23]

Needs to be bigger than an inch imo. I debated on this head but went with vpa instead.

[@LuskArcheryAdventures]

Yeah, a bit small for my liking as well...but some people don't care about cut size so much.

[@gavinsmitty23]

@@LuskArcheryAdventures I’m having great success with vpa 125 single bevel. Really loving that head

[@codiacmulletmulletlife9477]

looks like Darth Vader, Come to the dark side and shoot single bevel!

[@LuskArcheryAdventures]

Haha.

[@IamtheArcher777]

Sold ill take 2 packs😊

[@LuskArcheryAdventures]

Nice

[@SheldonHumphwey]

Bowmar made a mechanical broad head and it looks very promising! He made a video about them 3 days ago and they’re called “Beast Broadheads”. He explains how accurate and tough they are. You should check them out.

[@vfonte218]

Looked them up and they look impressive

[@LuskArcheryAdventures]

Thanks for the shout out.

[@brenthussey2348]

Just my opinion, but a broadhead that takes more than 200g of force from factory is a fail in my book. I've seen too many heads get in 150-175 range to accept 200+ let alone almost 300.

[@LuskArcheryAdventures]

Well, not too difficult to get them much sharper.

[@jasonsparks4601]

Offense but your test scores are misleading after you have told us the broadhead can be sharpened to 80some on the cutting score but then its tested at 3 times as dull....out of the box scores would be totally different from sharpened to 80ish inchlbs......

[@PersonalBestOutdoors]

I think you missed an important piece of the comprehension pie, friend. The broadhead CAN be sharpened to 87 with the staysharp guide c. However, they don't come out of the box from manufacturing that sharp. This is what he is grading. The manufacturer's out of the box sharpness. Not it's potential. Many people open a pack, screw them on the arrow, and take them hunting.

[@LuskArcheryAdventures]

Well, I showed how sharp they were from the factory. Then I referenced how Stay Sharp Guide has a video showing them getting sharpened by hand to 87. Nothing misleading about that.

[@lukeonderko8696]

Man a 1" 2 blade, better hope your shot is perfect!!! Not much of a hole

[@LuskArcheryAdventures]

Yeah.

[@Lovenlife139]

Pretty crud looking.. wheres the sharp point? Im sure it works tho. Everything from those folks do.

[@LuskArcheryAdventures]

:)