Luzon: Cold Steel Does it Again

[@nutnfancy]

Hi TNPrs! Project still strong and working hard. Remember TNP Patreon gets the videos first and some never post on the main channel! Here's some TNPr comments from Patreon, join the fun and full flow of TNP content: www.patreon.com/Nutnfancy "Scott Happy Thanksgiving to you and yours Nutn'! 1 2w Terry Eannetta Scored 4" Luzon at Cold Steel parking lot sale last weekend. $33. Love it. Carry on Lt. Col. 1 2w TacticalBunnyCA Happy Thanksgiving to you Nutn and all my fellow Patreons! Wearing my CS Large Espada pared with a Stat Gear Pockete Katakana today! The size difference makes me laugh! 1 2w Adam Boyd I've been carrying the large Luzon for most of the year. Awesome! It's my 2nd favorite defensive folder. (5.5" Talwar can't be beat!) Some days I carry both. I don't usually use pocket clips because I can get a better grip on it as I draw. The advantage of a big blade like that is it stays in position in my pocket. When I try to carry a little 4" blade it's hard to get a hold of. Only problem is sometimes it doesn't lock when I wave it out. Still haven't figured out what I'm doing wrong. Overall...I'd trust it to save lives. 1 2w Powernoodle The big Talwar is awesome, no doubt about it. I have them in both black and blue. 1 2w Load 2 replies Powernoodle The 4" and 6" Luzon cost less on Amazon, especially if you are a Prime member and get "free" shipping. $34.54 for the 4". 2w Aaron Gross Love the videos nutn! When's the table top of the honey badger? 2w The Nutnfancy Project So much I'm trying to push through the small funnel of content, working on several gun reviews now but it is on the list 2w Load 1 reply Pvt_Schmuckatelli A double dose of holiday KRVs. Where else can you get this kind of value? I totally dig the large blades. I've been looking at 4" blades, but after watching this video, those look small to me! LOL Thanks for stuggling through the pain and discomfort to bring us high quality content. Your pain is our gain. Tango Yankee Victor Mike. Happy Thanksgiving. 1 2w The Nutnfancy Project Yeah buddy, thanks so much for the comment. I thought I might give you guys something to watch to escape the relatives! 2 2w steve garrett Dude that is gonna itch when it dries, huff that fart 1 2w The Nutnfancy Project Bleach! 2 2w Doug Irelan Nutn I totally agree with your philosophy and you amaze me with your perception of your audience. I bought the Frenzy in December of 2017 after your KRV. When I saw the Luzon large last May I bought it. Now I’m going to buy the Luzon medium 4 inch and plan to occasionally carry it. 2 2w The Nutnfancy Project That's funny Doug! I do tend to know you guys pretty well. These knives are so inexpensive it really makes sense to get them as a pair. Then you can swap them out as your needs dictate. It amazes me a cold steel got them built at this price. 2w Incubad I purchased the luzon 4" in October 2018 off amazon and had to return it. The deployment was horrendous and the liner lock was extremely stiff and made my fingers raw. There is also no real room on the thumb stud. The thing that made me return it was the fact that it opened up in my pocket. The tip does not have much protection at all from fabric snags and that's what did it in for me. I returned it and got an urban trapper and CS spike. 2w The Nutnfancy Project Can't go wrong with that Urban Trapper, totally sick EDC blades 2 2w Load 1 reply Austin Langon Interesting comparing the knife industry to the watch industry. Who buys what, who makes what, who copies who, etc. 2w The Nutnfancy Project Doing watch reviews has helped my knife reviews. So much similarity between the two. 3 2w David Englehart That thing's huge (that's what she said). Thanks for making me spend money on Turkey Day Nutn... 😵 lol 2w The Nutnfancy Project You are welcome 1 2w Load 1 reply Jerry Hall I purchased the 4” & 6” from BladeHQ. Both are excellent. No issues with deployment. The 6” is definitely intimidating. Thanks for the review. 2w The Nutnfancy Project Thanks Jerry and thanks for using my BHQ links, they help me get these loaner knives. It will also give me .03 cents! 2 2w michael szymborski Any chance of another Microtech collaboration? I’ve fallen in love with the SOCOM, and a TNP version would be sick! I’ve EDC’ed my SOCOM since 2/17 and for me it’s the perfect 1st and 2nd combo. 2w john milochis Thanks nutn my wife hates theses vids mate every time I watch one I buy more stuff all well just ordered mine thanks 😀 TNSheep That definitly screams of a cold steel knife, but sexier than normal. 2w mike I need 2w The Nutnfancy Project You are wise 3min Chris Baker The day after Thanksgiving is a fine time to say THANKS Nutnfancy for all the reviews over the years. My stable is full of Cold Steel, SOG, OKC, Benchmade, Zero Tolerance etc., all on your recommendation. I actually brought a recently purchased Cold Steel Outdoorsman Lite to cut the turkey at my parents place yesterday. Life is good :D 2w The Nutnfancy Project Thank you Chris for that kind comment. I seek to serve my TNPrs with high value, great gear for their systems. That it makes you happy makes me happy! 2min david rockwell Your insight is valid regarding many U.S. based knife companies resting upon brand, reputation and hype. The quality, material and design of small U.S. manufacturers like Bradford, Survive and Hogue knives are a bulwark against the Chinese onslaught. Cold Steel has always been an extremely high value knife company due to the vision espoused by Lynn Thompson. Heal well and keep up with the physical therapy. Thank you for the continued effort and dedication. 2w The Nutnfancy Project Thanks David, much appreciated 1min James Parker Thank you. Happy thanksgiving. I am having the same surgery in February. But dang you now I need a new knife. Lol. 2w Tygre Cold Steel just continues to be awesome. 2w The Nutnfancy Project Yeppers 1min Arthur Krieger Awesome review Nutn. Love the philosophy about releasing competitive products. On another note I've been particularly interested in bushcraft knives lately (got a Mora and a Benchmade -- still testing them both -- looking at the Condor product as well) so I'm VERY excited to hear about the Work Tuff Cutmaka. And just more PoU on bushcraft blades, obvious as it may be. 1w matt Awesome review. I have the 6 inch fun to fondle. dont try to over do it with your shoulder 1w Nathan P Hubsch I like that honey badger, I need one. 1w The Nutnfancy Project It rocks just now Todd Strelka I'm originally a Cold Steel guy. Turned on to the brand by Nutnfancy when he gave away CS knives at a get together several years ago. This knife reminds me of my XL Voyager. I love the clip point blade. 5d The Nutnfancy Project I love that Voyager, thanks Todd"

[@hindsight2022]

Now thats a mouthful

[@social3ngin33rin]

Hide your wallets!!!!! @18:00 I'm surprised he didn't "harp" about the handle grip material more!!! >_> Dude!! I've already bought a lot of knives (multiple times) from BHQ this month!!!! Can't you do all the knife vids in November?! lolololol Saves us money on shipping :'( also, less pollution from shipping multiple packages lol

[@hededcdn]

Dude, you're a cool bro!!

[@greatlakestrout]

I've had this on my Amazon wish list for months

[@bacon81]

Hey Nutn, just want to say thanks for all your hard work you put in for our benefit. But I hope that you will apply to be in the gundies. I believe you deserve some recognition from the gun community as a whole. ✌🏽

[@MichaelWebber]

4" Luzon is definitely a street fighter. A rotisserie chicken from Costco came at me hard and fast, and I left it in pieces.

[@LEARSIKCIGAM]

6” baby!

[@shane8037]

@@LEARSIKCIGAM yeah maybe if you got rotisserie turkeys running around your hood

[@rosscurran5650]

What do you call a chicken looking at a bowl of lettuce....... chicken sees a salad 😁

[@Immopimmo]

I love how Cold Steel just do their own thing. I'm a big fan of their knives, especially the large ones. 😁

[@christianbolt5761]

I started buying Cold Steel back in the 1980s, back when they were made in Japan. The value was there even back then. Always impressed with quality, thoughtful designs, functionality and aesthetically.

[@francismartino6890]

Wow really?!

[@ThunderChunky101]

In the 80's Japanese things were all inexpensive. Very. And excellent quality. But for VERY different reasons who Chinese good. Everything used to say "made in Japan" for a long time. Now it all says made in China. Gladly the quality is Chinese goods has come on a long way now (2024) Again, all for very different reasons. Basically the Chinese goverment is subsidising goods sold abroad.

[@jeffslaven]

I'd rock that 4" all day. Lynn Thompson is the man!

[@darrylreformina1438]

I 💯 agree. But don't forget Andrew Demko, he the man too 🤙🏽

[@eko2633]

@@darrylreformina1438 Demko for President

[@darrylreformina1438]

@@eko2633Thompson & Demko For President 2024 🤙🏽

[@ralphvaccaro2638]

Nice knife

[@balsalmalberto8086]

That's what she said.

[@skyman6936]

Between living next to Cold Steel's HQ and this crazy old bat reviewing knives my wallet doesn't know what to do. Used to have an EDC tray, now I have an EDC drawer.

[@CrimsonSurvival]

Yup, I spend at least $100 a month on blades.

[@snickersnee15]

I’ve been packing and flipping the 6” for about a week now. I carry an H1 Ladybug alongside for the sheepy types. But man. I can’t put the Luzon down! As a car flipping knife. I took it in the woods and carved down a walking stick for my girlfriend and it worked excellently. That flat grind does exactly what it should! Cold Steel wins again.

[@BlueRidgeMarine]

Well Col. Thanks to you I have carried the recon for over 6 years. Even bought the ex large for travel. I'm done. I'll carry this knife to my grave and leave my collection to my grandson.

[@RexApplegate]

I have approximately 8 months of edc use at work with the 6". The steel is sub par and thin, and comes with a very rapidly dulled extreme razor edge. It is not ideal for chores. It is however very resistant to chipping or snapping, and extremely thin sharp and pointy. It is tailor made for maximum legal weapon potential in a place with oppressive laws. My opinion is that as is typical of Lynn Thompson's work, it is a highly refined and very affordable purpose built precision uncompromising weapon, nothing more or less. If you want a work knife in this size, thicker and better steel is what you want, not this. Want an optimal single edge folding fighter? Here it is.

[@albertdominick140]

I found that the scales are horribly made and it won't be quiet if you are getting ready because it makes super clunky plastic noises, and the lock mechanism is also terrible, the scales should had been done in G10 rubber, at least, and the locking mechanism smoother... this is a 10 dollar dollar knife all day... when I purchased a pair at Wish from Fury knives for 19 bucks each that are more solid that should tell you all you need to know..

[@sigiligus]

Everyone knows the deal with 8Cr13MoV by now.

[@z.r0.m_0n]

If you want a work knife at least buy D2, 8cr13mov is good for light tasks like opening boxes nothing worse

[@RexApplegate]

@@z.r0.m_0n I've yet to own a d2 blade. I have used the 5.5" aus 10 voyager tanto as a work knife for years now. I consider it the perfect working folder.

[@dcwaku]

I have a Cold Steel Spartan that I brought years ago when it first came out. Love it. It actually saved me from a altercation with three "gutter punks" and their pit bull.

[@hededcdn]

Awesome

[@hededcdn]

That thing is badass and intimidating as hell!! Would have loved to see the gutter punks eyes bug out.

[@nathangilbert7774]

Nice I rock a Rajah II its just a tiny bit longer and has a full flat grind.

[@cwheels01]

Still rocking the Talwar XL.

[@powerplay4real174]

DCWAKU all the reason to but a few others all most impossible to go wrong with a good cold steel pocket knife XL L M or Small.

[@steveo13757]

Id rather have the 6” blade in a defensive situation than a 4”, thats why I carry one.

[@leolv520]

use a glock man

[@francismartino6890]

@@leolv520 lol, not as easy as we all wish man

[@mixflipextra]

I love it. A Filipino inspired folder!!!

[@TheWestboom]

What a time to be alive, knife reviews better then ever, keep it up nutn u da best

[@gregorywilson3318]

Exactly the reason I have ALWAYS enjoyed your videos, NOT at any point do I lose interest! I am greatly appreciative for your honesty and for all the excellent reviews that help me out while keeping me entertained with your excitement and thoughts! Joyous blessings to you and yours and happy new year! I am on the fence with which knife I will be going for but as always you’re an absolutely wonderful source for such helpful guidance that will lead to my soon to be new knife purchase, as always THANX!

[@deionbeeldenstormer7498]

A full-size Cold Steel Rajah (6” blade) - rapidly deployed in an underground parking garage - prevented my truck from getting jacked by two meth heads. They literally freaked and split, very quickly. When you can’t legally carry a firearm, a big folding knife can and will save your ass in those rare situations when you’re cornered and your life and/or property is at stake. Cold Steel understands this reality. Sheer size is intimidating as hell, and 9 times out of 10 will defuze a bad situation fast. If it absolutely needs to be employed defensively, a large knife will give you great reach, and cause a longer/deeper wound channel. The coolness factor of bigger knives is just an added bonus.

[@jacobpoucher]

bulllshit.

[@deionbeeldenstormer7498]

Jacob Poucher was one of the meth heads who unsuccessfully tried to steal my truck. :D Better luck next time, bud.

[@jamespoehler4349]

The whole bit about US Manufacturers goes 'cold' when the Luzon twins proudly display "CHINA" on the blades.

[@StriderX04]

Hi. Filipino here. It's not (luh-ZON), it's (LOOSE-ohn)

[@SOMNIOHM]

whipped out the 4“ in longhorn steakhouse and properly cut up my outlaw ribeye!

[@hash2718]

I love cold steel. Been buying their products since I was 12 and recently have been only buying the large folders. Can’t get enough of them.

[@nilespeterclemens8328]

Still rock the recon 1 tanto after 8 years

[@stephenfewson7188]

I edc my Cold Steel Rajah ii that I had to pull in Melbourne once. I'm a big fella that can handle himself and was vastly outnumbered until I pulled my Rajah. Pocket deployment was perfect and the sheer size of it appearing from my jeans front pocket was enough to end it all, right there and then....lol You could see they all wanted a closer look, but at a much further distance 😆😆😆 G'day from Australia mate.🇦🇺

[@ABACUStoPC]

I'm very happy to see more knife reviews coming out here recently, guns are out of reach for me so knife reviews are the main reason I've been watching this channel for so many years, please keep them coming. P/S: some fixed blade reviews would be really awesome too...

[@ForbinColossus]

BIG QUESTION Cold Steel Luzon Large vs Kershaw Strata XL ? Today, the large Luzon is $39. and the Strata XL is $70. I am very concerned about the CRAPPY liner lock on the Luzon - it is so thin to prevent a much thicker heavier steel blade from closing. How much more for the Triad lock on the CS?? I would pay more for a better mechanism.

[@JustSumGuy01]

Probably why they put a side safety on it because they KNEW the liner was so thin

[@miccheck11]

Reminds me of their ti-lite. The 4inch model was one of my first knives my dad got me for Christmas one year. Started carrying it when I was 16 until the end of college. Cold steel makes great stuff and I'll be getting myself this one for Christmas this year.

[@petemitchell6788]

Sorry for the silly question, what is a Marshall blade?

[@billmorrigan386]

LOL. He means martial, tactical, military-ish.

[@anthonyp7051]

Zipper pockets leather biker jacket is a must with these

[@Bill11812]

Love this knife! I picked up the last 4" version SMKW had on display back in June. This knife instantly became my EDC blade. Its sharp as hell, I love the blade shape and how light it is. The action on it is like butter, just seems to pop open with ease. Overall a homerun from Cold Steel.

[@DragonHide94]

Why do you always call the Large Espada an XL? The Large Espada is a 5.5 inch blade just like the Extra Large Voyager, while the Extra Large Espada is a 7.5 inch blade (it also has room for a full two hand grip...).

[@Greuwor]

Got a Luzon 4 inch from your Review. Have used it and it carries very well while in my slacks.

[@repro7780]

I just picked up a Cold Steel Voyager, somewhat based on your review from about 8 years ago, and its an awesome knife! Razor sharp, and a great price. Great brand!

[@TimberMoto]

Without watching the whole video... Did they fix the design flaw from the first run?

[@hindsight2022]

Design flaw ? I had mine for about 3 years it rocks

[@TimberMoto]

@@hindsight2022 There are some videos on KZbin regarding the tip not sitting flush with the handle. I read a whole thread about it on one of the knife forums as well. Part of the issue was supposedly the thumb studs not letting the knife close completely.

[@hindsight2022]

@@TimberMoto i cant speak for cold steel but the 1 i got is fine closes all the way no tip sticking out or loose thumb stud

[@jakep111]

Mines fine and I love it

[@freman007]

Yes, in some of them the recess for the thumb stud wasn't deep enough to allow the blade to seat fully when closed. But they've fixed that now.

[@AOSHOOTER]

I bought the Luzon because of this and I do not regret it!

[@bendee3953]

I carry the smaller Luzon very regularly. But, I enjoy the largest Ti-lite and I love carrying the larger ti-lite with the Kriss style blade. I notice the larger cold steel blades ride perfectly in the pocket and lined up perfectly down the center of the thigh which always works for me. I love Cold Steel and the Luzon is a 9.5/10.

[@pocketchangecirca91]

how do you sharpen them, my dad left when i was 9 he never showed me

[@LovedMyLoyalLongDog]

Thanks Nutn for starting me off in this great hobby. Yes, you were the guy. Since joining this channel, I've collected a bunch of neat knives and other "stuff" from your recommendations. I consider the money well spent for the pleasure I get. Thanks again.

[@bumpercoach]

is there a better folding version of the classic Ka-bar?

[@acgrand2553]

I carry a Talwar XL daily and have done so for 3 years now. I love big blades and like to carry them always have and always will.

[@ThatOneGuyTURNER]

Nutn I've always appreciated your in depth, non biased, user experienced gun videos. You've helped make me a knife guy now as well and I'm enjoying your whole collection of videos. Thank you sir and keep up the good fight!

[@njrivetelite]

Where is that knife sharpening link?

[@SHADOW-ke6xz]

8:13 all you need to know!

[@speavy]

Do you have a video on sharpineg blades?

[@Velshard]

7:54 Captain Nuts: "...post surgery, bear with me." *crunch* Me: "Oh that was not a good sound..." Captain Nuts: *Farts* Internet/Everyone: LOL

[@Jsummer4004]

I really hope i get to meet you one day

[@nutnfancy]

I'm sure you would be disappointed...I am every time I look in the mirror

[@joarflesja1516]

😅

[@bulkhungry]

@@nutnfancy relax , we're not here for your good looks , only your knowledge and wit . 🤙

[@JoyZofSoRRoW]

Hey Nutn... what's your opinion on the recent sale of Cold Steel to GSM Outdoors???

[@ghosttheoremproductions5469]

I like that belt clip for carry in business casual. Handle seams a little bit thick for that use-case but I like it. At that price it's pretty hard to argue with.

[@ts440s]

Nutnfancy, the G.O.A.T

[@xenonram]

@@TrustNoOne88 how do you not know what g.o.a.t. means.

[@ts440s]

@@TrustNoOne88 Now we know where your mind is at. Nothing but greatest of all time.

[@darrylreformina1438]

Nutnfancy is Legend 🙌 🤙🏽

[@spwan10]

In my opinion every pocket knife that isn't meant to be small an tiny should have a 4-inch blade. Every inch matters, just ask any women lol.

[@jorgevespucci9878]

Whats the general consensus on going full larp when going to the range with bdu's plate carrier etc?

[@p.f.r.7190]

I just got the big one in today, this thing is ridiculous. Great recommendation nutnfancy!

[@jimm244]

Don’t knock XHP! It’s an amazing knife steel (and tends to be underrated compared to the in vogue “super” steels).

[@collier9090]

Agreed but they aren't using xhp anymore

[@freman007]

@@collier9090 yes, apparently the steel production couldn't keep up with Cold Steel's demand. So they're using S35VN now. Still a very good steel.

[@txoilfield]

I've been into knives for 25+ years, own and carry a LOT of brands/sizes, but for some reason have never tried a Cold Steel knife. Just bought the 4" Luzon and 3.5" Pro Lite Sport knives. LOVETHEM!!!!

[@Matthew-the-bladed-bard]

My Luzon bounces closed when I wave it sometimes. I will be removing the quillion that waves the knife... maybe. I’m not sure yet

[@mozzberg590]

I have the larger one, aside from the cool factor it is a fully functional defensive knife. I still haven't figured out what to do with it though.

[@electrosnow]

Does this have a Kershaw smoothness release? Seem like it.

[@jackt4274]

Nutn could you recommend an overcoat to hold that big folder?

[@venividiscripsiaeternum]

Appreciate the review. Nutnfancy tells it straight while being very entertaining!

[@jakep111]

Thanks for the review man, I agree with everything you said I’ve been carrying the Luzon L for about a year and a half, steel is great and its just awesome. It’s great for me because I’m 15 and can’t carry a gun lol

[@jakep111]

The secondary lock makes me feel a lot better about carrying a cheap knife for defense

[@TheForrest12]

I believe it does have a ball bearing system instead of phosphorus bronze washers. I saw it in a disassembly video cuz I was curious as well as to what it was running on.

[@grumpybadger3575]

I carry 2 knives every day and one is always the cold steel hold out that's 6" long and then most the time I have a cold steel ak47 but it's fun to change it up now and then.

[@sapper3082]

I learn so much on your show. I have to drive 1 hour every day to and from work and I always start the day with one of your awesome shows. Keep it up!

[@randallholland3841]

I EDC the Cold Steel Ti-Lite 6 most days. It’s an excellent pocket sword

[@luevueee3004]

Can I get this knife if I live in California ?

[@ShootingUtah]

Who makes the first 2 knives? I've searched everywhere and can't find them and you didn't link to them either.

[@143DREWID]

First one, I have in medium. Great EDC. westernactive.com/cart/ Second no idea, but gonna look. Ebay listed Ganzo FH41: www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=Ganzo+fh41&_sacat=0&LH_TitleDesc=0&_osacat=0&_odkw=Gonzo+fh41

[@joeframo3347]

Mine's razor short out of the box I haven't sharpened it and I use it when I walk through the woods it chops through small limbs like butter and the blade still holds up it's a great freaking knife thanks for bringing out this video I think you're really awesome 👌👍🖐️

[@LonestarTaoboy]

Mine was razor long out of the box.

[@raudelcontreras2102]

I LOVE the. " Oh HELL NO !" I Baught the Large Luzon a year ago when it was Still New to the Market. I love it and it's my EDC. When I Pull it Out, people say. " Oh my GOD is So BIG !"

[@satuurn5245]

Can the pocket clip be switched to the left handed position? I'm actually left handed, so that is a deal breaker.

[@avwillis5269]

It does not. I'm also a southpaw, but I'm in the habit of carrying on my support side so it's not a big deal for me.

[@DJHamburgla]

Please do a video on how you engrave your knives. What do you use etc?

[@TheHillbillyHybrid]

Where do you buy those China made knifes

[@cvnhank]

Thanks for the review. Tell us where to get the Fairey Swordfish. Hank

[@Bear-nu8xm]

Luzon is really cool however the Frenzy is my favorite Cold Steel.

[@sneakypeaky6000]

I want a frenzy so bad I was on the verge of getting the sexy blue one but I was a little short on cash so I went with a code 4 which is another great knife. I have a XL voyager anyway so the code 4 was a great buy I can carry both. Wouldn't make much sense to carry the frenzy and XL voyager together.

[@Bear-nu8xm]

@@sneakypeaky6000 Yes, i like the blue one too. Such a cool design and you've won any non gun attack, simply by pulling it out.

[@sneakypeaky6000]

@@Bear-nu8xm yeah hopefully I get one in the near future. Also wanting an XL Espada which is another beautiful knife in my opinion. But yeah that frenzy well she sang to me the moment I saw her in those purty blue handles and sleek blade. To be honest I really wish they made a 3.5" version as well. It would be a nice utility blade for an EDC carry. I'd pay 90 bucks for a 3.5-4" version of this knife.

[@itsmfchunky2265]

I've been carrying mine for a year got it the same day u posted this only problem I have is closing it the blade makes contact with a screw and rolled the edge in that spot

[@willc9235]

The Luzons are fun knives. I have both sizes. Cold Steel is really hitting it. You need to check out the 4Max Scout. Just got mine and it is awesome.

[@mbuser781]

Got a 4max off Midway. $49. Awesome.

[@legrandfromage9682]

I’m glad the Chinese manufacturers are forcing American knife makers to step up their game. The customer wins in the end.

[@RumzDizzle]

The Voyager is still the best large blade they have imo. The XL is ridiculous and awesome.

[@francismartino6890]

Hey man, veteran here, thanks for what you do. What other big knives do you like waving!? I love my Kershaw Emersons, I love the Luzon, I truly appreciate your opinions. I have the CQC 11 and 6 in D2, am thinking of getting a Spartan, have you reviewed that?

[@glenngoins3100]

Cold steel Is great! Wish they made automatics. I'd love to see their version of a Italian stilettos.

[@collier9090]

It would be cool but they won't do auto knives, an auto can't pass their testing. They just aren't tough enough.

[@glenngoins3100]

@@collier9090 yeah but you know what? If anybody could do it I bet they could. Lynn Thompson and his team are geniuses, when it comes to making a well-constructed knife.

[@collier9090]

@@glenngoins3100 I definitely agree, Lynn is the man. Who knows, maybe they have been trying. I absolutely believe that if anybody could innovate a new, super tough design that it would be them.

[@HonoluluTita]

What do you use these big blades for? Do you go camping?

[@Hercules1-v9m]

I bought one (the 4 inch) as soon as they came out. I love it.

[@spicybison]

Been carrying the xl luzon for a year now. Love it to death. Cold steel's 8cr13 is nothing to sneeze at. Their heat treat makes it act like aus8.

[@francismartino6890]

About to get a Bachelor's in philosophy, I'm a vet and love this man, great job, thank you.

[@mikea.6608]

Just picked up a Cold Steel Voyager. Love it!!

[@darque1860]

I carry my cold steel outdoorsman, and my cold steel leatherneck tanto once in a while. Love em both

[@americantaxpayer]

Current edc blade is a microtech ultratech. Just switched yesterday. Was carrying a rajah 2 paired with a manix lightweight

[@neeko7878]

At 8:15... went from mindlessly watching a Nutn Vid to laughing uncontrollably for awhile 😂. Had to rewind twice to make sure I heard what I thought I heard. Ahhhh Flatulence 😂😂😂. BTW... sounded like a wardrobe change may have been needed 😂

[@Spike-13]

Love the knife show recently also👍

[@j.v.7451]

I've had the 4" luzon for about a year. My only complaint is the thumb stud. I wish they would have just left it as a flipper and not put it on. I DID stipple my luzon and it was well worth the 20m it took.

[@darque1860]

Happy. I love cold steel. Great quality for the money, and u can't beat their lock up devices. Lynn is a good dude, and cold steel as a company is the shit. Love the vids nutn. U the man.

[@thebostonbiker]

Nutn, thanks for the great review. After going to a local “hardware” store that only had Micrtech and Benchmade tools for multi hundreds of dollars I’m glad Coldsteel is still making great products that are affordable for the working man. In Florida I need a good tactical fighter that will be a force multiplier on the street and not in my wallet.

[@Highway9mm]

I'm watching this review exactly a year after it was published and buying this knife before the video ends.

[@DrewEdwardBacklas]

Like everything but the liner lock.

[@hindsight2022]

It has a secondary lock that is bulletproof .

[@pauls4460]

Got the 6 inch model, and used a Dremel Tungsten Carbide Cutter bit (#9901) to notch the flipper to grab my pocket for the wave deployment. Also replaced the clip with a metal one, I found the original clip was too tight on my jeans. Great knife, I love it!

[@coolcutter1]

Sold! Ordered the 6”. Thanks nutn!

[@Arcqueid]

I bought 23 Honey badgers for Christmas gifts. excellent blades.

[@jhilgartner17]

I am a huge fan of the medium. I’ve carried it for several months on and off and used it as a non tactical knife for LE duty. Cold Steel knocked it out of the park again.

[@markbrandt504]

Being left handed sucks. You rights get all the knives made for you, chainsaws, scissors, any tool ever made is most specific for a righty

[@billmorrigan386]

Emerson has some dedicated left-handed models. I love his Super Commander knife. It's one of the best tactical knives to this day in my opinion. Chris Reeve has some left-handed models too (very expensive non-tactical knives but outstanding quality, tough steels that won't break on a tin can). Emerson also uses a tough reliable steel (but not fancy Boutique knife steel) and the quality is good but not so stellar as on Chris Reeve knives. I prefer Emerson by far as I simply prefer tactical knives. I also love Cold Steel knives. Knives with a flipper can also solve your problem. There are a lot of them nowadays, including the Luzon models. Having used knives with a flipper, it's difficult to chose something else as far as I'm concerned, i.e., my preferences. The only non-flipper knives that get a pass from me are some Emerson knives like the Super Commander. By the way, Emerson knives have thumb-disks spaced far away from the handle. They are equally comfortable to open with the left hand.

[@billmorrigan386]

Forgot to mention. The Cold Steel Recon 1 folders have reversible thumb studs. Just unscrew the thumb stud and place it for the left-hand opening. Problem solved but... The Recon 1 models are tactical knives and not everyone wants to carry around something like that. However they have a wide range to choose from.

[@jackdanielzx]

i have a knockoff coldsteel ti-lite. great knife. then i got an actual cold steel ti-lite. my new edc. the knockoff is absolute trash by comparison. great company. the owner seems like the nicest company owner ive ever seen. i got my first cold steel knife (voyager vascero XL). after getting it, i immediately got the tanto, and the ti-lite and a few others. when i showed the vascero to my dad, he stuck it in his pocket. claimed it as his and tossed me a credit card to buy myself a new one. theyre that good. hands down favorite knife company.

[@Konos12]

Could you do a review on benchmade bailout

[@GrumpyBearArms]

I have to send back the one I just received. Too much metal for the liner lock to engage. So now I get to see how good customer service is.

[@danbrookes2997]

They cost a lot more here in the UK. I'll stick with my aluminium scale ti lite 6 I got in 2012. Good looking knife though.

[@phymat1]

Completely agree. Not to mention they’re sold out pretty much everywhere over here.

[@Critistrike]

I bought this knife right when I saw the notification for your video