M-Vave Chocolate- connect to Helix or Headrush MX5

[@Mattguitarmania]

Thank you for a clear and understandable and useful tutorial. Most people explain this stuff at the level of a rocket scientist so I appreciate the simplicity and practicality of your video

[@KozmykJ]

Very clear setup explanation, thank you. 👍 I'm so glad that I discovered this MIDI Pedal , just recently. I wanted a pedal to control functions in DAW plugins, which it does fairly easily. Initially I bought a USB pedal but that only sends 'virtual QWERTY' and there are no QWERTY to MIDI message converter programs; at least that I could find. I'm an Android user and installing the CubeSuite app was a bit of a faff but I got there eventually. In operation the Chocolate BT Works great. My first application for it is to control LoopMaster Pro inside of Guitar Rig 7.

[@iscgovea]

thanks , it will be great having a video of chocolate controlling the banks of mx5, that is painful click two switches to do so

[@caj2121]

Parabéns pelo vídeo, me salvou aqui

[@R3dbudd]

Just ordered one and the wireless midi adapter. Was wasting buttons on snapshots on my HX Effects.

[@TheXIT]

Hi Thanks for your video. Before I saw this I bought the pedal and set it up but was trying to use different MIDI commands and had problems. I'm wondering if you could test these settings to see if it was just an isolated problem I was having. I set the first footswitch for MIDI CC # 50 and #51 which is supposed to give you previous rig . The 2nd Footswitch I set for CC#51and #52 which is supposed to give you next rig. Then the 3rd footswitch I set to cc#64 for Tap Tempo (which never worked) and the 4th footswitch I set to cc#52 to trigger footswitch #4 so I could hold it down and enter tuner mode. Footswitches 1 and 2 would work at first but after trying footswitch 3 or 5 then Footswitch 1 or 2 would be erratic, sometimes causing the display to flash but not change rigs.

[@noneyafkn]

Does set list mode allow you to turn specific pedals on and off too?

[@piotrb7934]

How can I increase the wireless range of the Chocolate Switch? 3-4 meters from the computer, the connection often drops. The same is true if I use a MidiB USB receiver - at this time I compared MidiA, the range is three times better. I think the problem is in the iron casing.

[@piotrb7934]

I have a problem with my chocolate. After saving the settings, everything works, when I turn chocolate off and on, the settings disappear. I tried Cubesuit Android and PC. I set specific PCs under the switches and save them. What else should I do?

[@spartakum69]

Can you use this with the tone bridge app?

[@MarkRigler]

Thanks

[@aga2260]

Do you know how to connecting with nux mg400 please

[@matthewnicolas9041]

Does it work on the Headrush Gigboard?

[@gtrply6166]

Its work for zoom g3x?

[@offwego6907]

Can I use it to control 2 pedals simultaneously?

[@peteo8940]

Should work if you use the midi out of one into midi in of another.

[@offwego6907]

@@peteo8940 will it work if one is connected via TRS and the other one via BT?

[@rockitroller]

so the pedal jack ion the unit is also MIDI ? out ?

[@christopherscheidel5431]

Yes, its a special cable that takes the TRS pedal and wires it to Midi.