M-VAVE/CUVAVE Cube Baby Sound Demo

Sound Demo of a M-VAVE/CUVAVE Cube Baby
Note: Some of IR/CABs has been changed.
IR/CAB:
1. From Line 6 Vetta to EVH 5150 III
2. Marshall 1960A V30
3. From Marshall 1960A 175 to Roland JC120
4. From VHT Deliverance to Fender Twin Reverb
5. Soldano
6. 5150+Oversized
7. From KT77+Stiletto to Marshall V30
8. Diezel
AMP:
1. UK Gold Clean
2. Shittcow Clean
3. Brown Sound 3 CH2
4. Day Tripper OD
5. Two Stone Coral OD
6. VHS Rhythm
7. Mr. Smith Dist
8. Regal Tone Tweed
9. UK Gold Dist
RIG/GEAR use for recording.
1. Gibson Les Paul Standard Replica
2. M-VAVE/CUVAVE Cube Baby
3. Zoom Livetrak L-20
Connection: I used 3.5mm to Dual TS Cable (from Cube Baby to Zoom L-20), Left to CH1 and Right to CH2 in Zoom L-20 then direct out via USB Audio Interface Mode from Zoom L-20 to iPhone 11.

[@lostcrow]

I just got one of these for experimenting purposes... such a good price too for all the effects you get.

[@lannykun6630]

does it delay when you switch presets??

[@omerozen2320]

Thanx for share

[@Rywonmagun2001]

Please help me how to preset this like solo of she's gone with no buzzy sound

[@travelisttv7747]

same.. you can try reverb and gain

[@navigatori9797]

I have a lot of problems getting nice overdrive sound when I use it with my amp. It is way to harsh, nothing I can do about it. Any ideas?

[@MonotoneAudioAndLights]

@@navigatori9797 i think this pedal is not used to use amps, its like your using an amp into an amp

[@navigatori9797]

Yeap...I hoped if I use it with clean amp I could gig with it...I have to find another way 😊

[@MonotoneAudioAndLights]

@@navigatori9797 try not to use the IR/Cab of the cubebaby then use the preamp as a overdrive or high gain but the noise is worst

[@Odyss-d2p]

Sounds like the transistor radio I had in elementary school.

[@PaulSmith-oy8xp]

@Monotone - can you comment on any IR's that you like (for clean tone)? I'd love to have a couple of "near-Fender" wav's to have loaded versus some of the gritty distortion presets... Thanks in advance!

[@MonotoneAudioAndLights]

Im always use the Marshall 1960A for a clean, because of its warm tone

[@godwinbaring7870]

How does the ir cab and pre amps work? Is it already in the cuvave or you still have to put it in the pedal itself?

[@MonotoneAudioAndLights]

@@godwinbaring7870 i’ll recommend the tank G bersion of this.

[@blueguitar__]

I just bought this, and the colorful little lights don't turn on, what should I do, when I play it, it only sounds clean effect, not for other effects

[@MonotoneAudioAndLights]

have you tried turning the knobs up side down ? or maybe you haven't saved your presets yet. Try to press the both A & B foot switch for edit mode.

[@blueguitar__]

@@MonotoneAudioAndLights I'll try it thanks, may I ask again later? 😔

[@MonotoneAudioAndLights]

@@blueguitar__ yes, you can ask anytime.

[@alchemysticgoldmind4164]

Maybe 😏 t needs to be charged

[@Carvuasier]

hold delay and tone for couple of seconds

[@fasgamboa]

Do you know how to perform a factory reset on the pedal it self? asking for a friend that is not tech savy and cant plug it to the computer

[@MonotoneAudioAndLights]

@@fasgamboa have you tested different USB Cable?

[@fasgamboa]

@MonotoneAudioAndLights no cable. Want.to reset on the pedal

[@thevangaguitarman4750]

Does this have any noice gate? If i want to go this with any gig how this would be sound?

[@MonotoneAudioAndLights]

It doesn’t have noise gate. This pedal act like a modeler amp

[@thevangaguitarman4750]

@@MonotoneAudioAndLights so that there is no noise to play high gain destortion??

[@MonotoneAudioAndLights]

Im using a Humbucker pickups to less the noise in high gain i dont know if we use a single coil like in strat.

[@thevangaguitarman4750]

I've Ms 50g with it so that I can set the zoom before mvave cube ...ig it won't be noice what you say?

[@MonotoneAudioAndLights]

@@thevangaguitarman4750 if you use the cube baby as drive its okay to place it before ms50g

[@ВасилийДириженко]

👍

[@usersandeshthegim]

How to save preset

[@MonotoneAudioAndLights]

@@usersandeshthegim if you are in the edit mode just hold the footswitch you want to save until blinks multiple times.

[@redpillcommando]

It looks nice, but does it support Linux. If it does not support Linux it's just a fancy door stop to me.

[@MonotoneAudioAndLights]

I haven't tried it on linux but it works on windows

[@Werewolt]

You have wine ;)

[@HasanAidan-e3r]

cara ngilangin noiz nya gmna ya .

[@MonotoneAudioAndLights]

Try to use noise gate pedal

[@Rema-me6gj]

Output nya ga pke jeck ke ample cuma jeck gitar sama casan batray doang aneh

[@MonotoneAudioAndLights]

It is not a battery charger, please read the description, you can read the chain and all details.

[@MonotoneAudioAndLights]

It is not a battery charger, it is a 3.5mm jack plug into headphone out of the Cubebaby (3.5mm to Stereo TS Cable)

[@Junmartinez-hy5kq]

Ignonrant