【模型透明件完美打磨】最速方案最少工具分享 | Clear parts handling | LEAST STEP FASTEST SHARING

[@muwong]

用水晶甲挫磨既效果都好不錯

[@studioFO]

yes, 要平要快呢個都係一個好的solution

[@yunkil]

Thank you!!! Good tip to use the back of the 3M sponge! I didn't know you could do that. This is the first time I saw the Tamiya compounds, other videos show the Madworks ones (which I bought last week) I hope they are just as good. Very good to show the comparison with sanding and no sanding, thanks!!

[@studioFO]

glad that give you some ideas!!

[@量產型兵仔]

肥宅師兄，片中話拋光膏後要用水洗件，請問是否粗目完已經要先洗一次才進行細目呢？ 另外粗目細目雖然分了2塊布，但當天打磨完後是否也要洗乾淨才能下次再用呢？

[@studioFO]

水洗最後先做就ok, 我自己習慣做完晒會洗一洗塊布，唔洗的效果反而我唔知😆

[@量產型兵仔]

@@studioFO Thank you 肥宅師兄。

[@timothytimothylau]

肥宅 多謝你出呢條片 如果以1-2隻RG 為目標係咪各1枝研磨膏就夠？ 另外我見god hand 有出2000 4000 6000 10000 磨砂海棉 能否作為細目粗目研磨膏代替品？

[@studioFO]

其實1支如果你用我講的流程每個外甲件都用.... 應該1隻RG就玩完. 打磨綿, 打磨棒, 同打磨膏出黎的效果真係會唔一樣的, 因為打磨膏無一個實物支撐, 所以效果係可以拋到光, 但打磨棒同綿上到3000/4000號都仲係會磨花個表面... 10000我就真係無用過俾唔到comment, 但打磨膏啦, 你至少真係會用到, 10000號打磨條應該係D人上完光油再磨平水貼突出果D位... 你未必真係用得著.

[@VagrantHo-jv5in]

請問，我搵唔到3M打磨綿，用其他牌子的打磨海綿，用背面係咪都可有你段片所講，好幼細的效果？thanks.

[@studioFO]

其實我見3M打磨綿模型店, 文具店, 五金店好多都有, 未必真係咁難揾? 你講的其他牌子, sorry 我真係唔太知.

[@tinl4338]

請問巿面上有不同牌子拋光膏，它們有沒有大分別？

[@studioFO]

其實我自己就真係唔覺好大分別...

[@tmy0320]

想請問下透明件做無縫係咪都係一樣咁照做咋

[@studioFO]

因為佢係透明，所以其實係無得做，個縫都會係睇到

[@js888886]

反覆學習幾次後決定把眼睛拿掉開無視🤣

[@studioFO]

😘👍👍👍適當時間係要用無視大法！！玩模型最緊要輕鬆同自己feel good!!

[@kateyanjames9040]

省时省力的话，推荐用变频指甲打磨机，平面钻头上用双面胶贴上海绵砂纸或者抛光头，然后用低速来打磨抛光。实测有效！

[@studioFO]

是的, 我之前都有出了一條片是用納米指甲銼的 kzbin.info/www/bejne/rma2qH-qlJ5qh8U

[@kkk-fy1oy]

估你唔到係3M海綿砂紙背面..haha! thks for sharing!

[@studioFO]

呢個係我老師教的秘技😁

[@cdmark2]

非透明件,如唔上色素組,使唔使用打磨膏？

[@studioFO]

絕對可以, 而且個效果出黎係幾好嫁! 素組只用粗目都已經夠靚仔

[@rockywu8109]

@@studioFO 如果之後會噴光油嘅話 又有冇分別呢？

[@studioFO]

@@rockywu8109 會光滑左，咁就要睇你鐘意咩野effect

[@rockywu8109]

@@studioFO 咁OK喎 我想試下少少部件位置係特別比起光油出黎嘅效果再光滑d thank you呀

[@jeffreyleung5806]

你真犀利, THANK YOU!!

[@jeffreyleung5806]

I really like how you take a more practical approach to building. I personally don't have the time nor patience to go from 400 to 3k grit. Keep making videos plz!

[@studioFO]

Ha-ha... that's true... I really can't stand using more than 10min for removing 1 nubmark. Because I have a MG nu gundam that I wanna start...

[@afterschoolboy]

肥宅哥，不能用刀尖去剪透明件啦 请珍惜你的神之手

[@studioFO]

呵呵收到，不過神剪已經榮休左

[@hojoe2678]

簡單而又直接，耗不耗時間的問題，交回事主來衡量🤨

[@studioFO]

是的, 堅持做到最好的也是大有人在, 我自己也只是給多一個參考就是做了這些結果就是這樣. 模型就是自己想怎做就怎做. 自己開心是最緊要. 現在是人玩gunpla嘛, 不是gunpla玩人😆