M1000R WHEELIE CONTROL DTC (IN DEPTH DEMONSTRAITON)

[@S-MotoAdventure]

That’s absurd. This guy sound like he has 500k subs . How did not have it? Thanks for the video sirr

[@topmaster999]

I’m hoping someday I will 😁 but thank you! Comments like this motivate me to keep making videos

[@m4nzss3]

Nice work brother. Sure it helped many people to understand the function. What an effort from your side. Really thankful and appreciated it. Thank you.

[@topmaster999]

Thank you for the comment! 😁

[@toma.8445]

Hey there just wanted to say that i have a yamaha mt09 2023 and in its most powerfoul mode and wheelie control at minimum i can power wheelie with ease at a 60+° and it keeps you from looping and the fastest wheelie i did like that was from 1st gear all the way to 4 gear at 190 kmh at a high wheelie degree its a wheelie monster

[@topmaster999]

Oh shit! That’s so high up. My bike won’t wheelie anywhere near 60 degrees

[@toma.8445]

@topmaster999 if u want I can send u a few videos over to ig to show u it's really a masterpiece

[@toma.8445]

​@topmaster999 if u want i can send u a few vids to your ig

[@andrewcallender1128]

the damaged go pro if the lens is scratched just make it nice and clean and put clear nail polish over the lens and it should make the scratch invisible

[@topmaster999]

Hmmmm I might look into that!

[@gtatom]

Underrated content creator 😁

[@topmaster999]

😁 thank you!

[@OctopusVlogs1982]

try wheelie control on a panigale or streetfighter v4, because both they have that wheelie shenanigan thing

[@topmaster999]

If I get my hands on one I will! :)

[@yodomcat]

Thanks for this. I have the S1000 and can't (power) wheelie without turning wheelie control off. When I have the wheelie control on I can't make it lift. Could you post a tutorial showing how you clutch with wheelie control on, the revs and how much throttle you use. Thanks.

[@topmaster999]

All my wheelies are power wheelies I never clutch up, I start my wheelie at 50 km per hour

[@yodomcat]

@@topmaster999 Oh really! So 30mph/50kph, first gear and then how aggressive are you on the throttle? Like from 5% to 80%. This is the missing ingredient for me, I am smooth on the throttle and am concerned pinning it will loop the bike. A video showing this would be stellar!

[@topmaster999]

I’d say maybe 50% and I give it a tiny bounce on the handle bars

[@yodomcat]

@@topmaster999 sweet thanks man! And pinning the throttle in theory won’t loop the bike?

[@topmaster999]

If you have wheelie control turned on it will only let the wheel come up 2 ish feet and you can pin it and it won’t come any higher. Just make sure it’s actually on haha

[@TuneOnthe1]

Side note: Fallout was way better than I expected!

[@topmaster999]

Man I felt the same way. I thought it was gonna be just ok but it turned out being wild haha

[@MangoT140]

Thanks for the followup video!

[@topmaster999]

Heck ya let me know if you have any other questions :)

[@HyperBiker]

DTC has nothing to do with the wheelie control. DTC mean Dynamic Traction Control.

[@topmaster999]

You are correct. I had a few people ask if it does anything with the wheelie control

[@Pesting_Yawa]

Hi do you think I can do it for the first time i mean I have experienced it before with my 125 but that was way long time ago what do you prefer mode 1 only?

[@topmaster999]

I prefer to ride in mode 1 yeah

[@kaibinwong4247]

What are the settings on your 16 s1000rr for wheelies?

[@topmaster999]

I just ride in slick mode with traction control on haha

[@kaibinwong4247]

@@topmaster999 is that better compared to race mode with traction off?

[@topmaster999]

I’m actually not to sure. I bought that bike in 2017 and put it in slick mode and never took it out of that mode 😂

[@AlvaroRamon998]

Hello Do you know if I turn off DTC completly and wheelie control is on, will wheelie control still working?

[@topmaster999]

Dtc doesn’t affect wheelie control

[@adriansoto5018]

What is the best DTC for wheelies?

[@topmaster999]

Dtc doesn’t change the wheelie

[@wama4485]

Thx for this video, so ‘no wheeliesupport’ is the way to go for me. Can you maybe clarify in another video where this plus and minus dtc does make a diffrence?

[@topmaster999]

That might be a little harder to test, it’s how much your bike is allowed to slide in corners :)

[@dietmarschuler2638]

No difference

[@StruddersMotorrad]

⁠​⁠​⁠@@topmaster999if you are talking about slide around corners isn’t that “Brake Slide Assist”, whereas DTC would control traction in any situation not just corners?

[@Drunk0nCustard]

@@StruddersMotorrad DTC is mainly corner control & slippage

[@aleksandrkorovin1524]

I don’t know about BMW electronics, but I heard about 2024 Yamaha MT 09 , it has almost all same settings, and what guy said if you have you traction control on, you can correct you wheelie control setting 3=no wheelie, setting 2=small wheelie , setting 1= decent wheelie, but with traction control on electronics can make mistake and just cut your power in high angle, and it’s not fun , because you gonna slam your front wheel …. He said he prefer all electronics off when he doing some hooligan wheelie stuff, but it’s okay if you want small wheelies for ~5 seconds you can keep traction ON and wheelie on 1-2 , it’s not gonna loop your bike, I think for all new electronic assistants works similar, but I’m not pro, it just what I found for myself 😀

[@Ambonius07]

how do you sync your music to your BMW??

[@topmaster999]

What?? You can sync your music to a bmw?

[@lIlIIIlllIIIIlll]

Hello teacher, I'm watching your KZbin helpfully I'm a subscriber living in Korea. Your always good videos help me.Thank you. Can I ask you a question? It's my bike 23 s1000rr winglet model. I've got the dtc down to -7, the willie control down to level 1, Raise to 6,000 rpm in the first gear, then release the throttle, I've rewinded it, but the front wheels are just a little bit Even if you turn off the dtc, it's the same symptom. Why can't I do Power Willie?

[@lIlIIIlllIIIIlll]

The front wheel goes up a little bit. It feels like a little bit Release the throttle completely at 6,000 rpm I'm going to wash my hair again and go up to 12,000 rpm The wheels won't come up What kind of setting should I do?

[@topmaster999]

Are you in race pro 1 mode? you need to be in the mode your making the custom setting on

[@lIlIIIlllIIIIlll]

@@topmaster999 That's right! lace pro mode one I'm using custom. I don't remember exactly now, engine maximum power level 1 Engine Break Level 2 Willie Control Level 1 I think the rest of the DTC is in the middle.

[@topmaster999]

When you change your wheelie control settings it will let you change it in any mode you want. So set high wheelie possible mode into race pro 1 mode then when you are riding make sure it’s in race pro 1 mode

[@topmaster999]

Dtc doesn’t make a difference what setting your in

[@theperipateticgumshoe9047]

Are you doing this in second gear?

[@topmaster999]

1st

[@1LOVE2WHEELS]

Hello brother, if you accelerate too much will it turn?

[@topmaster999]

You can hold the throttle to the max and it won’t go any higher :)

[@1LOVE2WHEELS]

​@@topmaster999 thanks a lot for answering brother !! I will try it soon ehehe :) i give you feedback

[@topmaster999]

Anytime!! Make sure it’s turned on and you’re in race pro mode to try it!

[@1LOVE2WHEELS]

@@topmaster999 but with anti wheelie off you can throttle max ?? sorry i forgot ask.. don´t want to go to hospital ahahaahah

[@topmaster999]

When anti wheelie is turned off you can’t go full throttle. You will do a backflip! Make sure it’s turned on to go throttle max!!

[@m1000rrc]

Wheelie control 1/2/3/ how high it go

[@topmaster999]

I have the first 3 modes in my previous video :)

[@anthonypeters1797]

It doesn’t hold it for you

[@topmaster999]

It kind of does