M12 Milwaukee hammer drill

[@andrew1898]

As a Plumber I use these all the time in residential settings. No need for 18v stuff unless your doing commercial.

[@AddictedtoTools]

Even in construction I don’t get the 18v gear out much

[@AddictedtoTools]

Definitely gets the job done.

[@treehugger4916]

You don’t need 18v/upsized drills in commercial either. They’re overpowered and I’ve watched guys break a lot of stuff with them. I work as a commercial electrician and the m12 impact driver has handled everything I throw at it and it won’t break fasteners as easily. Kinda want to switch from an impact to a drill though. Impacts are better for working in cars with high torque bolts. Not needed in the construction trades

[@andrew1898]

@@treehugger4916 key word. Electrician. Yall are doing small boxes regardless. Commercial plumbing is 4in waste, storm water and up. The hangers for that are 5/8. Have fun doing that with the 12v kit.

[@FlashBro-r4w]

Will the new M18 brushless impact or drill (non fuel) be enough to drill through brick ?

[@DiligentDave1966]

The M12 series tools are all pretty solid.

[@a.j.williams195]

No they not

[@MR_G92]

I have alot of m12 tools as a tractor mechanic, the 3/8 impact gun, 1/4 inpact driver, drill, soldering iron, disc cutter, dremel, torch and reciprocating saw... incredible tools. Much better than the 18v makita equivalent

[@drosethegreat223]

I use mines all the time when I’m mounting tvs on brick very good drill

[@asafeibba4420]

Brruh how many tvs do you hang on your house 😅

[@AddictedtoTools]

Some of us install tvs for a living

[@a.j.williams195]

Yet I can't hang up curtains with it🤬 pos drill

[@icemedia4830]

I use a strange combo of the M12 Surge impact with the M18 Fuel Gen 3 Hammer Drill. Works great with the right bit even for harder materials like slab concrete. Obviously there's a point where it just makes more sense to bust out the SDS but there is definitely plenty of applications where the M18 or M12 hammer drill is plenty of power. Even the impact with a good bit works well for brick/block

[@UntitledUnlimitedCreations]

These are little beasts. I use mine for everything. It’s currently being used to mix mud. Still going strong.

[@furblokeEN]

Just use Bosch blue bits and no hammer or you'll round the end off. Way quicker if you aren't getting the SDS out

[@GeorgeGeo]

M12 even today is still tops

[@TheFrostDrake]

To keep the dust on the ground to a minimum i suggets painters tape and an envelope. Sure theres still dust but most of it is kept in the envelope.

[@RustyBeez]

JUST got mine. SO happy with it. Love it.

[@ti3167]

Always use the 4-6 Ah xc batteries. Def gives u more power

[@luke8222]

The high output batteries are the best

[@TacticalThib]

Love my m12 fuel bro little beast

[@chriswarren9857]

I don’t even use drills no more, i have the compact dewalt sds and an adapter if i need to use a holesaw..

[@daveonezero6258]

I've installed floor sensors for an alarm using a M12 and some tapcons. It works fine for little stufff.

[@Mrwhite-kz5wv]

Started out really solid now it gets hot quick and shuts down

[@EmmanuelGonzalez-pw5eu]

Wait really??

[@BigAl-SD]

Maybe not in the right settings for what you need it for or try a 4.0 - 6.0 battery

[@Christopher._M]

Maybe it needs some lubrication

[@anabelandralph5418]

HOY!!! YOU GOT A LICENSE FOR THE DRILL!!

[@mw2277]

WELL AT LEAST

[@kostaskaronis5046]

use MFDS drill bits from wurth,and you will NOT need the hammer function.out houses here are build propertly,from concrete-bricks etc etc,and NOT from wood.

[@haydenhull985]

Milwaukee is the best!

[@jesseallen4184]

Wow! That went through it like butter. I’ve got a M18 Fuel hammer drill and it took me a couple of minutes to do one hole, with a 4.5mm masonary bit. What brand of bits are you using?

[@zachzoltowski1414]

Bosch and Milwaukee make the best bits imo make sure you have a hammer function

[@prestigemechanical3600]

Only problem is the drill does not have anti kick back which………….. for small tools they really should because you know darn well we all use them for jobs larger than they can actually handle.

[@filo5240]

U reckon this and an impact would be decent for starting off with just installing lights and shit like that

[@AddictedtoTools]

For basic works the m12 is fine. But if you’re going to have any harder work like putting longer screws into hard wood or steel, the m18 are needdd

[@procrastinator1842]

If you use the M12 drill with an XC battery you will get a lot more power. It's absolute weaksauce if you use the battery like this guy did in the video. He likes tools but seems to be a bit clueless when it comes to technical stuff. If you wait for a couple of months until the new M12 Gen 3 drill/impact and high output batteries come out, they have heaps more grunt and should bridge the gap better netween 12/18v.

[@Keep_LogicNReason]

The hammer drill m12 is good for 10 holes in bricks and 4 holes 1/2 inch in wood that if you want to last for 10 years.

[@BigAl-SD]

I actually use it to mix drywall mud to shoot texture

[@christianwardally573]

“Softer materials like brick”

[@AnonymousYouzer]

You got soft hands bruther

[@AddictedtoTools]

I have to presume you’re not in a trade…?

[@mikenormandy9250]

Anytime doing blues and screws, sheet rock/concrete plastic anchors or ‘rawl’ plugs - the hammer drill/driver is great all day and you’re not lugging around the Sds or Sds Max. I wouldn’t ever use a masonary drill bit over 5/16” (~8mm) as it just can’t do it and screams/whines while just destroying the bit.

[@nsatoday]

I have both the M-12 series and the dewalt xtreme. The M-12 I liked least was the hammer drill. No power. I’ve also found the xtreme SDS is faster than the M-12 SDS. The ergonomics on the M-12 is not comfortable on many of the tools. I’m slowly switching to the xtreme line for everything but the niche stuff like the stapler. And I’ll probably keep the M-12 bandsaw too.

[@nsatoday]

Oh, and since most of my tools are 20v/60/120 dewalt it solves the charger issue for me too

[@xaviermaquilon8718]

How’s the battery life? Also can u do various task like heavier duty things

[@unladpinoytv]

can you also use it for wood?

[@austinreeves5221]

not wit that bit but yeah

[@Sskreechy]

How's it do with tile? That's all I need it for.

[@RaggedsEdge]

You haven’t come across old good brick. Some of that is harder than concrete.

[@BabyKMoney]

Yes

[@armdrk3233]

Still it’s very torque-y ,as powerful as many 18vs from other brands..

[@RaggedsEdge]

@@armdrk3233 I used my gen 2 m12 fuel drill for 8 months on the job. Running 7/8 and 1” self feed paddle bits required low gear but it did it. But I’m the end it was too much abuse and while it didn’t die, the Chuck had one lock up tooth left and the motor and drivetrain assembly was moving in the case. So I upgraded to the m18.

[@ethanclem3383]

I was gonna say… I work in a lot of schools that we’re built in the 60’s and I have the same drill, the brick is very hard to get through with it, most of the time we just use a rotary hammer

[@rabbittroll4247]

That's kinda weird in US my milwaukee sds 1" hammer drill barely goes threw brick? Only run it into the joints

[@luke8222]

It's your bit or you have a defective battery or tool

[@AnhThu-pb9dw]

Bạn dùng mũi khoan gì?

[@ObmanaCare]

Real question how often do people use the m12 hammer drill over the m18, idk I just feel like might as well just care the m18 but with a small battery or do people like the weight difference

[@PineyJustice]

Weight and size, easy to toss the m12s in your toolbag, the m18 stay in the truck until absolutely required.

[@PrestonSteele09]

Good enough to get stolen from me but honestly let him have it. The trigger lag is stupid, only buy the 1st gen

[@user-bn1cz8vx4d]

I agree on the 2nd gen. Picked up the third today and it's way better. Runs more like my m18. Also way quieter and feels like about double the torque. Huge upgrade

[@brentfixesstuff]

Matt . How long do the batteries last. Charge every night or s couple of batteries a day?

[@AddictedtoTools]

Depends on the sized battery. I love having the 6amp on it as it lasts ages and can be stood up. If you’re drilling like this a lot batteries won’t last long. If you’re just doing general fit off they last weeks with a 6. Days with a 2ah

[@burakow1]

I'm looking for the smallest hammer drill in the world, does anyone know it?

[@javierortega8024]

Que modelo es tu taladro M12???

[@manuelestrada4984]

Nice

[@robertbickford2021]

My m18 took about 10 times as long to get through brick last week....

[@zingerzte4192]

melwooookeee, mate, innit

[@GTB-yu2be]

So you are trying to tell us that with all the tools you have, you actually use that M12 at all?

[@AddictedtoTools]

I’m using it in the video… yeah I use the m12

[@jayscore7182]

Where's the battery?

[@luke8222]

In the bottom of the grip

[@jokermaness]

It's a smaller battery. You can get bigger batteries if you want

[@gonz9278]

You've got red on you.

[@Ritchie-Ray]

really want those.but too expensive.😂

[@WilliamBrown-bg7vm]

No they’re not Look at marketplace every day after you have $60 or so You’ll see them for sale. Don’t be scared to get one that looks like it has a bit of use. I’ve gotten so many tools this way. Just picked up a M12 Fuel right angle impact 1/2 for $100 a month ago. It was damn near new

[@ZavsWRLD]

jeffrey dahmers drill!

[@grs4.169]

Mine lasted 3 months

[@LeDung-tv3bw]

Use 3404. Máy của bạn củ rồi bỏ đi. Lời chào đến từ Việt Nam nghèo khổ😂

[@spencerwyche2552]

Buy a hammer drill,these hammer settings are misleading.

[@AddictedtoTools]

How’s it misleading?

[@houstonsmitherman6888]

M18 will do it in 1/4 the time with a little extra weight lol

[@tolga1cool]

And like double the weight. This thing won't be used for drilling holes daily, but having the option to do so on a drill that size is really good I think

[@emanuelsanchez2069]

Y3ha getting it

[@miguelgutierrez9385]

You didn’t have it in the “drill” position that’s why it’s so loud

[@AddictedtoTools]

I had it in hammer as I was showing the hammer function….

[@KillerRatedM]

Nobody’s concerned bro j drilled into his wall? Lol

[@AddictedtoTools]

Why would anyone be concerned?

[@KillerRatedM]

@@AddictedtoTools concerned was the wrong word lol but im curious on why u did

[@ManuelGomez-eq7qk]

Megutariya español quitar la roca sisepuede desar más

[@Joejoe-tv3hm]

No power

[@a.j.williams195]

False advertising I used one of those with a masonry bit it doesn't even go all the way through that still is a POS!!¡

[@AddictedtoTools]

How’s it false advertising when I show it. What was the material?

[@user-xq5dp2rv5p]

pumpkin🎃🎃🎃👈 number one 😎😎😎💯🎉

[@mukhtarmukhtar9994]

Batrey dan charger m 12

[@mukhtarmukhtar9994]

Saya mau order charger dan batrey m 12

[@freddy2141]

M12 drill with good quality drill bits and good quality work appears 🪄 🎉