I love e36's with stock grey bumpers it gives them the 90 vintage look
@thegreenfrisbee2 жыл бұрын
I just picked up a 1994 318i with a m52tub28 swap. Super excited!
@itsmikelake2 жыл бұрын
Hell yeah!
@PRAYIMAKET4 жыл бұрын
Thats a sick ride man. I wouldn't mind seeing that baby boosting
@itsmikelake4 жыл бұрын
Cheers bro! She’d vibe hard with a turbo haha
@Tuffdatto4 жыл бұрын
Man I need this is in my garage 😍 No need to know what she looks like, it'll be killa. My bro has the skills 🤙🤙
@itsmikelake4 жыл бұрын
Cheers my bro, make sure ya enter! I’m sure the odds will be amazing haha
@Tuffdatto4 жыл бұрын
Tru cuz I'll be smashing out the entries. Was gonna turn my datto 1600 into a drift rig but decided to keep it a cruiser ay 🤙🤙 Mad props my man 🤙
@acarguy44694 жыл бұрын
Pro tip mate. Use transmission fluid as an engine flush. It can cause issues with creating oil leaks when you use a alcohol based chemical in the engine. Do the exact same with granny fluid. 1/2 qt run engine for 15 min and vwala!!!
@GTAWarLord4 жыл бұрын
You need to put a lakeside sticker on it bro rep your bizzo 👍👍
@boomstickbilly4 жыл бұрын
Not sure I can keep my eyes open another hour...3 am... ugh.... I definitely want that car though
@ernestoguzman74604 жыл бұрын
Can’t wait to own it and start swing
@InThaCuttt Жыл бұрын
Do you have the link for the angle blocks!?
@jamesbayliss57404 жыл бұрын
Came out super clean definitely gonna enter
@itsmikelake4 жыл бұрын
Cheers bro, haha you’d get ya old wheels back!!
@jamesbayliss57404 жыл бұрын
@@itsmikelake haha fingers crossed keep the awesome vids coming man 👌🏻
@beanjuice63504 жыл бұрын
This car is wild man, excited to see some one rip it at keep it reet 😍
@itsmikelake4 жыл бұрын
The day I see this car sliding, I’ll be so fricken stoked! Cheers my dude
@meikodrifto30184 жыл бұрын
Very well done guys, It looks really clean too! will definitely be entering! 🤙
@itsmikelake4 жыл бұрын
Thank ya bro! Can’t wait to release the new merch and kick the giveaway off!
@alexlazy42962 жыл бұрын
Why did you not undo the bushings and preload tighten them after dropping the car?
@maxlagewaard89594 жыл бұрын
Giveaway car is looking nice (almost too good to give away). btw there's an e36 328i on graysonline auctions in vic might be good for you for parts or feature on channel or whatevs
@itsmikelake4 жыл бұрын
It’s really nice...😅. Thanks bro, I’ll have to check that out!
@OwenReilly044 жыл бұрын
Mate I’m getting my p’s soon, this would be so sick to have. Good luck to everyone
@itsmikelake4 жыл бұрын
This would be a perfect first car hey!
@OwenReilly044 жыл бұрын
@@itsmikelake for sure
@dropthebassgz96203 жыл бұрын
Hey so i own a e30 and it has the m10b18 carburettor and i found an m40b18 in a very good condition for 250€ is it a good motor worth the time and effort to swap the m10 for the m40?
@tommclean99954 жыл бұрын
Must admit. Bit of black shoe polish on the bumpers and she’d be mint
@harleywatsonofficial3 жыл бұрын
Where did you get the 4.44 diff from im in Brisbane and want one for my 318i m43
@drova24814 жыл бұрын
How do you enter???
@itsmikelake4 жыл бұрын
It's in the video bro! Details being released soon. Giveaway will begin 1st december yeww!
@oliversmith35844 жыл бұрын
Bro I want this car soooo bad
@joshuagrimshaw57114 жыл бұрын
I’m building an e46 318i but I’d be so happy to win this!!! I’m definitely entering!!
@itsmikelake4 жыл бұрын
I’d legit be so stoked to win it too 🤣. It’s bloody cool. Plus the merch looks sweet too 😍
@jamesfaithwell68674 жыл бұрын
Has anyone got a link to the merch store
@chemistryfps2 жыл бұрын
i just bought a 318i e46 (M43B16) 115 hp if i weld the diff will it be a good drift car
@itsmikelake2 жыл бұрын
Yep it’ll work fine. Learn to carry speed. Then upgrade the power
@chemistryfps2 жыл бұрын
@@itsmikelake thank you
@teslageislayer4 жыл бұрын
bro I'm looking forward to the giveaway
@RorydriftmansxrsilviaWilkinson3 жыл бұрын
WHENS THE GIVEAWAY BROTHER SICK DRIFT MISSEL BUILD BRO NEED ONE ASAP MATE OVER IN NEW ZEALAND BOYS CHOICE WEEKEND DOING THE MAHI MAHI OVER A SOME COLD DRINKS OFF BEERS WITH THE BOYS BRO
@khaleddannaoui22144 жыл бұрын
How do you enter
@baileysamuels34974 жыл бұрын
is it okay if i find a way to get it shipped to nz can i enter
@bmrbandit16714 жыл бұрын
Currently thinking I should lease that shop next door to you 😂 get another bmw down there
@itsmikelake4 жыл бұрын
Yooo that would be SICK!
@Zaruk03 жыл бұрын
@@itsmikelake Can you tell me the name of the wheels you used?
@itsmikelake3 жыл бұрын
@@Zaruk0 Unfortunately they were some random wheels I found on Facebook marketplace
@aryoseto31403 жыл бұрын
What width, profile, and size wheels are you running?
@itsmikelake3 жыл бұрын
15” wheels. 195/55/15 tyres. But I’d run 175 or 185 if you can
@martinsbrants58313 жыл бұрын
M40 and disk brakes on the rear? Someone's been messing with it previously.
@5IMPStompDownPT3 жыл бұрын
Whats size wheels? Can anyone say? Thankss 👍
@itsmikelake3 жыл бұрын
They’re 15x7 with a +25mm spacer 🤓
@qers2 жыл бұрын
@@itsmikelake Do you happen to remember what tire size you went with for these?
@xxayduckxx2314 жыл бұрын
Please I want to win this car love to have this car it's my dream car
@itsmikelake4 жыл бұрын
You’ll have to enter when it opens my dude!
@xxayduckxx2314 жыл бұрын
@@itsmikelake OK I will do my best how do I enter and when
@mattysalt73594 жыл бұрын
Even if I don’t win this I am going to copy the mods 🤟
@itsmikelake4 жыл бұрын
Hell yeah, that's the attitude bro! Such a rad wee rig
@siyuhou27964 жыл бұрын
11:07 BGM ?
@forgingaerospace54774 жыл бұрын
This would be a blessing to own, working two jobs , two kids rent through the roof and have to struggle with the current car i own 280k 93 honda
@itsmikelake4 жыл бұрын
Entries will be opening on the 1st December! Keep your eyes peeled for the announcement video 😁
@forgingaerospace54774 жыл бұрын
@@itsmikelake will do thanks 👍🏻😊
@TheRealIsaiahWake3 жыл бұрын
Who won this car?
@itsmikelake3 жыл бұрын
@jscottdrifts won it :)
@wezsyder14 жыл бұрын
I’m moving to Brisbane and would really like to be the winner on this car please bro, from South Africa to New Zealand now to Aus haha trying to keep the drift Stoke alive.. how do I get the tickets for this draw? Epic videos btw bro keep it up.. lakka lakka, sweet sweet not sure what the Aussie bro’s say haha
@itsmikelake4 жыл бұрын
Haha epic bro, details for the giveaway will be announced soon! You’ll love Brisbane, it’s sick!!
@wezsyder14 жыл бұрын
@@itsmikelake awesome thanks bro, can’t wait to be the new owner 🤞🏼🤣
@InOneWeTrust4 жыл бұрын
ill trade my e46 for it lol
@itsmikelake4 жыл бұрын
Haha you’ll have to try and win this bro!!
@0ckgobananas4 жыл бұрын
I hope I win 🔥🔥!
@itsmikelake4 жыл бұрын
Competition will begin December 1st! Video will be released this weekend. Good luck!
@fisiipeautome2391 Жыл бұрын
Can you do one in 2023
@Jake_Hamlin4 жыл бұрын
Maxpeedingrods are kinda junk bro, i wouldnt recommend buying them. Other than that itll be a cool build, exciting for the channel even tho I'm in NZ. Just wondering, are you considering welding/reinforcing the rear subframe mounts? It's a pretty cheap mod that's kinda important for drifting an e36
@itsmikelake4 жыл бұрын
They’re more than good enough for someone who’s wanting to get into drifting/racing! It’s supposed to be a basic car that someone can use and slowly upgrade themselves. The subframe reinforcement is definitely a nice upgrade! As it sits, the subframe is sweet so that’ll most likely be up to the new owner 🤓.
@Jake_Hamlin4 жыл бұрын
@@itsmikelake I only asked because i ripped my subframe mounts clutch kicking my stock 4cyl m44, definitely mention it to the new owner if your not gonna do it. I imagine it's a lot easier to do with a lift and a spare set of hands too (speaking from experience) the reinforcement plates dont cost much, just takes abit of time to do it
@itsmikelake4 жыл бұрын
@@Jake_Hamlin I did the same also in my old shell haha. Definitely a huge weak point in them hey. I’ll look into it for sure. It’s a pretty big thing for me to give away a car on this channel given I’m so small haha definitely not made of $$! I’ll see if I can source some plates 🤘🏻