M5Stack C Plus 2: How to Use CC1101 & NRF24L01 Wireless Modules- Complete Guide!

[@YellowPurple]

BUY : s.click.aliexpress.com/e/_DEVjaAh

[@bobik2308]

Which one did you prefer?

[@barcelbr3799]

Congratulations friend, which antenna do you recommend to reach the maximum distance with a good configuration?

[@YellowPurple]

Thanks, friend! For maximum distance, I recommend using a dipole antenna or a Yagi antenna, as they can significantly improve your range. Just make sure to configure them properly for the best results! Much love, bro! ❤❤ Stay tuned for more! 🥰💪

[@barcelbr3799]

@@YellowPurple Is it possible to put an SD card in this project? Could you make a tutorial for us? Good luck, friend.

[@كلشئ-و3ل]

Very good work... Following from yemen ❤

[@YellowPurple]

Much love, bro! ❤❤ Stay tuned for more! 🥰💪

[@notfaze_blobke3159]

Hey, great vid. I was wondering if you still have an aliexpress link to the nrf module or wil a regular LNANRF24 work? Thanks!

[@МаксимКіц]

will there be a more detailed soldering scheme?

[@DUCKY-q4u]

so will you be able to turn of projectors and tv's with this

[@SecretActs]

no thats a ir sensor

[@ikochan4776]

Where can i buy stuff like boards or wires?

[@YellowPurple]

s.click.aliexpress.com/e/_DELouaZ

[@WALTY3D]

Do i have to buy both antenna boards or do i just buy one

[@ayaanaqeel665]

What type of wires do you use for the pin connectors

[@rerissongomes1351]

Top dás Galáxias 👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👍

[@YellowPurple]

Much love, bro! ❤❤ Stay tuned for more! 🥰💪

[@Decknuut]

is there any way to get a board like this but pre- solderd. i dont have a solderer. Thanks

[@oybekbaxtiyorov2005]

very good

[@YellowPurple]

Much love, bro! ❤❤ Stay tuned for more! 🥰💪

[@t4m1k_]

Hi could i ask how big was the vero board you used in the video??

[@YellowPurple]

30mm*70mm

[@trolllogic2897]

Do you need to plug the module in an outlet for it to work?

[@anessivic]

What i need and witch cables ?

[@rushgaming7037]

Can i jamm ble signals with this tools..?

[@ketuaoyen6039]

What wire are you using?

[@ketuaoyen6039]

Male to female? Male to male? Female to female?

[@ketuaoyen6039]

Pls answer me

[@YellowPurple]

@ketuaoyen6039 Male to female and Female to female

[@YellowPurple]

Much love, bro! ❤❤ Stay tuned for more! 🥰💪

[@ketuaoyen6039]

@@YellowPurple thx man 🙏

[@CoppaXamsu-y5k]

1)Review ur oscilloscope. 2) tut of reverse engineering module/circuit /microcontroller

[@CoppaXamsu-y5k]

@yellow purple

[@privatelifeofbetasquad9480]

Does bruce support on m5 stick c plus

[@BenEstrad]

Bruce may work but I’ve seen posts on Reddit saying it doesn’t work very well

[@kevinpoceblo277]

Why are you using the vero board ? Can’t we just add the antena with the wires on the m5 stick ?

[@tamecupid]

You can, he did this just for speed and comfort😊

[@anessivic]

Where to buy the cables that are on the down side

[@YellowPurple]

These cables are custom-made by me. I shorten the cables and make slight modifications

[@ikochan4776]

After u soldered the headers into the board, what did you do? The wires just spawned there lol

[@saburoarasaka6754]

Same thing i was going to order soldering iron but then i've seen the cables that are just spawned out there so i js cancelled my order

[@etablexhanedenver3661]

What is the wiring on the buttom

[@YourOasis]

Pins

[@ZXC1LANPIZ]

Can someone help me with connection because Im don't know how to do that

[@valeralabuts3700]

where can i search schema, for this

[@valeralabuts3700]

@Yellow Purple

[@valeralabuts3700]

can you do a new video tutorial how to conect all

[@JARETHKINGYUH]

Do i have to program cc1101 to use

[@YellowPurple]

no

[@naseramin]

What are these boards

[@YellowPurple]

3x7cm Dot Veroboard DOUBLE Side s.click.aliexpress.com/e/_DCEjEOt

[@MR.ROMEOTECH]

I want m5 device where do I bye

[@ketuaoyen6039]

Aliexpress has it

[@YellowPurple]

Much love, bro! ❤❤ Stay tuned for more! 🥰💪

[@YellowPurple]

s.click.aliexpress.com/e/_DEVjaAh

[@BADSHA-hacker]

Price of cc1101 Module ?😅

[@Nw4sk]

Brazilian real is about 20 reais, in dollars it is 4

[@reytek]

@@Nw4sk link please

[@YellowPurple]

Much love, bro! ❤❤ Stay tuned for more! 🥰💪

[@GaMe-777-]

Pleas next modul M5stack C-BACK NB-IoT(SIM7020G) global version

[@YellowPurple]

Much love, bro! ❤❤ Stay tuned for more! 🥰💪

[@GaMe-777-]

@@YellowPurple please activated subtittle all languange in every video.... 🙏

[@tonkofonko]

Make please esp32 capture signal then save it to sd card and transmit with 433 mhz cc1101 as replay that captured signal.

[@YellowPurple]

That's a really interesting project idea! Capturing signals with the ESP32, saving them to an SD card, and then retransmitting them with the CC1101 sounds like a great challenge. I’ll definitely consider exploring this in a future video! Thanks for the suggestion! 👍

[@tonkofonko]

@@YellowPurple Thank you soo much

[@michadominika4006]

Send link to male female connectors.

[@sivajireddygamerreddygamer]

Hi Anna ESP 32 wifi deauthication with OLED display

[@YellowPurple]

Hi! That sounds like a great project! I’m considering making a video on ESP32 WiFi deauthentication with an OLED display soon. Much love, bro! ❤❤ Stay tuned for more! 🥰💪

[@SecretBunker-e1n]

You should buy a flipper zero

[@Boncreate]

As if someone is actually gonna buy it. 300 bucks? Nuh uh

[@YellowPurple]

Yeah, Flipper Zero looks awesome, but it's a bit out of my budget right now, bro! It's pretty expensive. Maybe someday! 😅💸, Much love, bro! ❤❤ Stay tuned for more! 🥰💪

[@im_anhar]

​@@YellowPurple im broke too elhamdülillah

[@xxx7917]

If I could afford one

[@YourOasis]

​@@Boncreate it is not even 200

[@dawidcrozier6813]

Could you post a soldering scheme for this ?