MACHINE CHECK ON MY S15!!! (S15シルビアマシンチェック) (MEIHAN SETUP) ENGLISH Ep.22

Hello everyone this is my Machine check for my S15 Silvia. Meihan and aggressive driving Setup. 500HP 2.1L sr20, eagle rods, CP pistons, Tomei Poncams 256 and cam gears, Tomei Headgasket, BC Racing Springs and retainers, TD06 25G 10cm turbo, Trust Wastegate, F Service Top mount manifold (best sounding) 850cc Top feed Injectors, CHASEBAYS power steering cooler and Trust oil cooler, trust customer intercooler, Blitz Radiator and GTR fan and shroud, B knuckle, DMAX tension rods, Ikeya formula Tierods, Dmax D1 spec Coilovers 8/6kg springs, GTR rear end 4.9 final drive, Shafts and Hubs, factory rear brake caliper with PMU Pads, Originlabo Aggressive Line aero, 55mm front and rear fenders, Originlabo Carbon fiber GT wing and roof wing, Originlabo Silver carbon Fiber Type 2 bonnet, Dmax carbon fiber trunk, Saito 11 Point rollbar, Defi meters, HKS F con V pro computer, Nstyle seat and steering wheel.

[@nickquill8132]

Such a simple yet so effective set up gets the job done always frothed your aggression in driving keep it up 💪🏼

[@Toshihiro808]

Thanks man 😎😎 yes I make it super simple and works better than most cars haha

[@yoyoda_tv]

The best mod on this car is the “maa niggga Larry” sticker 🙏🏿

[@driftcrash2286]

Simple is best! ✌️✌️

[@Toshihiro808]

Yes it is 😊

[@msigaming4114]

mantaaaap!!! bro!!!!

[@driftcraze2138]

Your car's fire bro, keep up the good work stay safe 👍🏻🔥😷🔥💪🏻

[@Toshihiro808]

DriftCraze 2 thanks man appreciate it 😊

[@MarcoFMSousa]

1:07 "trust whiskey" Sure I will, cheers! 😂

[@jovangarcia539]

Brahhh u forgot the value cover. Sick bro

[@Toshihiro808]

Jovan Garcia I know haha I forgot a few things haha

[@jezMki]

toshi gogo with the good content!! keep it up bro! also do you make your own adapter plates for the r33 trans?

[@Toshihiro808]

Thanks man. And I use a Japanese maker adapter plate

[@frankzane7326]

man wich youtube link the s14 srNA machine check.

[@quirinoramos6231]

Awesome 😊👌 got a question, how much like a car like yours but with your previous setup worth? Before the 2.1

[@Toshihiro808]

Quirino Ramos about 10-15k for a basic turbo built s15

[@ervone09]

Awesome car and video. With the stock lca and bknuckle what size spacer you running to fill in the gap in the 55mm fenders

[@Toshihiro808]

ervone09 running 50mm in the front and 35mm in the back :))

[@fearlessdrift6110]

also when you talk about toe in millimeters, is it per wheel or total

[@DannyR2681]

4.9 and 500whp man that thing must rip with all the right wheel spin. I bet it’s real rowdy?

[@Toshihiro808]

DGSR 03050818 yeeee it’s super good. Need 4.9 with this r33 gearbox cuz 3rd gear is so long compared to sr boxes that 4.9 r33 feels like 4.3 or 4.6 in sr box. Car is super rowdy 😎

[@DannyR2681]

Toshihiro180sx r33 box is equivalent to 300zx z32 box right? Did you cut and shut the sr20 bell housing to the r33 box or used adapters?

[@Toshihiro808]

DGSR 03050818 z32 gearing is the same as r33 but the bellhousing is different so we use adapters on the r33 box and cut and shut the z32 ones here

[@Toshihiro808]

Hell yeah nice!! Lmk how that goes when u put all those on ur car.

[@DannyR2681]

@@Toshihiro808did you used a thinner bolt for the top bolt on the front coilover mount? Or did you slot the hole more?

[@DomenikZiiba]

so dope !! * _ *

[@Toshihiro808]

Drift Bastards TV presented by Domenik Sieber thanks man 😊😊

[@edf_colors]

Do you have any info on how much your s15 weights? awesome setup man!

[@Toshihiro808]

The weight I’m not 100% sure but it’s not much lighter than it is stock. Especially cuz bigger wheels, big turbo, bigger box and bigger rear end it might be heavier than stock possibly lol

[@markk_888]

Are you getting heatsoak issues running the mid mount intercooler setup? I'm planning on running the same intercooler setup but worried about that

[@Toshihiro808]

Yes I kinda got a heating issues but fixing it this week. Putting water sprayer and bigger radiator in it and it will be totally fine

[@markk_888]

@@Toshihiro808 do you get any power loss due to the heat generated? i'm actually planning on doing the water sprayer as well, seems like an easy way to keep temps down. i've heard that really good ducting around the intercooler and radiator makes a big difference too so its only air being sucked in from the front of the air rather than hot air circulating around the engine bay

[@fearlessdrift6110]

I was wondering what kinda gas you run/do you have watermeth injection

[@saxshwemoe4282]

so nice drift missile ( your name is GOGO 180sx ?)

[@ricardoguazz]

How do you guys do the 2.1l stroker? 87mm pistons?

[@liloversteer7308]

how do you set up your alignment? for toe?

[@Toshihiro808]

Lil Oversteer I’m pretty sure I mentioned the toe in the video

[@DJAtteint]

@@Toshihiro808 is the 5mm toe out front/toe in rear the total or per side out of interest?

[@Toshihiro808]

Ben Somerville it’s toe out each side

[@DJAtteint]

Oh, and rear camber too. My UK build is basically this spec almost exactly (purely by chance) and we keep on fluctuating about what feels best on rear camber.

[@greenhilldrift3420]

Hey mate, in the Diff is it a 2 way or 1.5?

[@deewayne757]

Using rack spacers ?

[@laurynasvalatka3354]

Maybe you can remember whats your front caster and camber ?

[@Toshihiro808]

Laurynas Valatka my front caster is at 6 and camber at -7.5 😊😊 I forgot to mention that.

[@laurynasvalatka3354]

Ha, nice. That completely the opposite what we run i Europe 😁

[@Toshihiro808]

Laurynas Valatka yeah rest of the world does it opposite than what we run it in japan. Reason why I have to turn the car myself instead of self steering setups

[@fearlessdrift6110]

do you run sway bars? also what kind of tire pressure do you run on these 08r's

[@fearlessdrift6110]

we dont really have valino's in montreal canada where I live and im struggling to find something comparable. we have zeknova supersport rs tires that could be similar but i dont think they last like valino's. im having a hard time choosing tires. even in the front I have nexen sur4g 225/45r17 aired up to 55psi cold and its too grippy. my car makes ~340wheel and our tracks arent made to build up a lot of speed like meihan or bihoku. dont know what to do

[@samcoyle718]

are you competing in this car?

[@Toshihiro808]

sam coyle yes in Japan I will be. My 180 after the vet instal it’s going overseas

[@seanbinnema5908]

Relocated rack or stock position man ?

[@Toshihiro808]

Sean Binnema my rack is in the normal location and no offset spacer either.

[@seanbinnema5908]

Toshihiro180sx oh really that’s interesting ! Do you use a normal rack spacer for any extra rack movement or just stock as well ?

[@Toshihiro808]

Sean Binnema I don’t run anything. My tierods are bolted just straight to the rack like factory. I don’t like using rack spacers

[@OhThatsHilarious]

Do you run a bov?

[@Toshihiro808]

MightAs Well never did never will lol

[@SR-fx5sm]

Get r34 shifter

[@nobeur6980]

what do you do for a living and how old are you lol