A time laps video, of machining a gearbox plate from aluminium on my DIY epoxy granite cnc mill.
Пікірлер: 49
@AS-nx2uf4 жыл бұрын
Well that was for sure one of the most annoying background music ever BUT what’s with that surface finish??!!!! AMAZING!!! 🙌🙌🙌 Please post videos with the machine sounds only, would love to hear how it runs! But damn that surface finish!! 😍
@aarondcmedia95854 жыл бұрын
Agree fully. Machining sounds are their own perfect symphony.
@opendstudio71414 жыл бұрын
I too can hear if the feeds and speeds are correct, but getting a good part is what counts. The surface finish you achieved tells me the machine is solid like a rock. 😉
@Andrew_Fernie4 жыл бұрын
Totally agree, A few moments at normal speed would be nice too.
@dalecollison7914 жыл бұрын
You are a legend! I wish I had your skills in this area. Please keep the videos coming through!
@satriodarma12984 жыл бұрын
That is a serious part right there !!! This is such an art from an engineer 🔥🔥🔥
@nickvanwyk1264 жыл бұрын
Congratulations Stef. You've build an excellent machine. Plaats alstublieft meer video's.
@nicholasjacob35944 жыл бұрын
wow super glad to finally see this thing make some parts
@ozzy12804 жыл бұрын
That surface finish is incredible! Your machine is a beast. If you don’t mind me adding, the background music is really annoying. I’d love seeing more footage of the machine cutting in real time with no music. 😊
@NerdlyCNC4 жыл бұрын
Good stuff! Cheers, Jason
@Svanitterzon4 жыл бұрын
Tnx
@TrPrecisionMachining4 жыл бұрын
very good video..thanks for your time
@1981Ryguy4 жыл бұрын
Very impressive. Finish looks great!! How can someone actually click the dislike on this. Some people I swear. Anyways great work and nice to see parts coming from your work of art!!
@gabeS26624 жыл бұрын
Very cool! I would have been concerned about the part moving under cutting forces in OP2 with such little contact area with the vise and machined some soft jaws.
@Svanitterzon4 жыл бұрын
I have tought about that, but my cuts are still pretty soft. Did a few of these parts and none of them gave trouble.
@user-yu8uo9vr2i4 жыл бұрын
Believe it or not, vise clamps better with this much contact, than let's say, 2 cm. NYC CNC did a video on this topic.
@ilyaaronov31864 жыл бұрын
How much cost you to build this milling unit?
@Muzkaw4 жыл бұрын
I think i'm seeing quite a bit of flex / play on the spindle column, is it some weird camera effect or do you know where this comes from ?
@Svanitterzon4 жыл бұрын
The whole machine is standing on 6 rubber machine pads. But they are a little to soft so when the machine does some rapid moves the whole machines moves. And the camera is on a fixt stand so you can see the colomn move a little.
@user-hh1hv1zs1f4 жыл бұрын
Goood wery wery good
@mcl124 жыл бұрын
Great part , for a machine u built urself , is it for a costumer or personal use ?
@AcEkrystal4 жыл бұрын
Ziet er goed uit, mooi gemaakte machine hoor. Heb even op je site gekeken naar alle foto's ;). Mischien ontmoeten we elkaar ooit is ;)
@Svanitterzon4 жыл бұрын
Tnx, de website stelt niks voor, foto album is het best om te bekijken denk ik Xd
@MF175mp4 жыл бұрын
Could you do some heavier cuts on steel to give us an idea of how well the epoxy granite works?
@ClckdyClck4 жыл бұрын
Any ideas on the specs of this mill? Like its accuracy, spindle power, rapid speeds and max feed rates?
@HuCzEk923 жыл бұрын
@Erik Mikkelsaar cost?
@pieterveenders97933 жыл бұрын
@@HuCzEk92 €15.000 to €16.000
@raymondcuda59064 жыл бұрын
Hello Stef, Nice work. What software are you running? Thanks
@mohammadrezagolbaz4324 жыл бұрын
Have you ever had problem with your cnc controller?? Are you satisfied of this controller?? Do you recommend this controller to me for buying one??
@paulbadea80904 жыл бұрын
Hi What CNC program you run on you pc for control? Nice piece.
@mustafakhalil0074 жыл бұрын
great job, what the best feed and speed parameters your using ?
@t2r1894 жыл бұрын
Stef tell me what screw sizes are used for the x, y, z axes? What do you think is enough of this size for your assembly?
@Svanitterzon4 жыл бұрын
X and y axis are 20mm the z axis has a 25mm ballscrew all with a double nut system
@user-ov4ss7zi5w4 жыл бұрын
Super))))
@raulfranciscoplaza96724 жыл бұрын
good morning! What a fantastic machine!!. I am designing one and I am having doubts about the speed that my spindle should have. Could you tell me what is the range of revolutions you can get in your milling machine. Thank you very much and fantastic work!!.
@Svanitterzon4 жыл бұрын
Currently my spindle is at max 6000rpm. The servo who drives the spindle can run up to 12000rpm.
@raulfranciscoplaza96724 жыл бұрын
Stef van Itterzon Thanks a lot!!! If you allow me another question ?: What proportion have you used for concrete? And what dimensions does your concrete column have? I would like to make a similar milling machine, and to know what measures of width and depth you have put to the column Thanks a lot!!!
@gaiustacitus42425 ай бұрын
I've produced literally tens of millions of dollars in parts on CNC milling machines having a maximum spindle speed of 4,200 RPM. Of course, I've also used VMC's with spindles having speeds of 8,000 RPM to 50,000 RPM. A spindle with a maximum speed in the range of 6,000 to 12,000 RPM is good enough for use in a small shop. The lower the investment you can make to achieve acceptable quality and output the more profit you will make. I would rather have 4 spindles turning with each making chips at half the output of a "better quality" CNC that costs 4+ times as much as the cheap machines. Over the years, I've had competitors price themselves out of the market and go bankrupt by investing in expensive machine tools. They were doing fine with less expensive machines but listened to some salesman who was pushing shiny toys to foolish boys.
@emily361304 жыл бұрын
is it for a new fighting robot?
@Dan-dg4qj4 жыл бұрын
Hi, Stef ! How do I contact you to talk about your CNC machine?
@solsquarenamibia67694 жыл бұрын
Could have been nice if you changed the camera angle.can not see the part form as the machine is cutting.
@dzjo1004 жыл бұрын
What is controller cnc?! Please!
@augustinvangeebergen82134 жыл бұрын
eding cnc
@sarahjane45834 жыл бұрын
I don't know why but this video made me want to do some coke while watching
@peterhaan90684 жыл бұрын
Blessed is the Google god for he has given us the mute button!