Machinist Tips and Tricks Volume 5

[@xzzy1298]

Loving this series! Keep going!🤝

[@OctaneWorkholding]

Thanks!

[@74willy81]

Keep "em coming. Thank you for helping to spread the knowledge, I know it all takes time in an already busy day, greatly appreciated!

[@OctaneWorkholding]

Much appreciated

[@tdg911]

You put out some great content, love the tips and tricks volume series! Thank you for sharing. Your shop looks like it has some really nice machines and metrology tools

[@sicstar]

Gotta love that precision plop!

[@dadgarage7966]

I have an Insize vernier scale caliper. Works great.

[@HTooL]

The thread micrometer measure the middle of a thread. It means you could be OK with a thread micrometer but still have a bad thread because of the broken tip of the turning plate you have used for the thread.

[@radtap]

AvE added a spinning window you'd normally find on ships to the inside of his CNC machine it works great

[@OctaneWorkholding]

Visiports are nice.

[@atomichydrogenweld2823]

a plethora of great tips.......thank you so much, an old fart in Florida

[@Cheezzyizill]

do you have a link on that film you put on the window? Just curious how long those last?

[@JordyP89]

Wonder if a product called rainx would work for long enough in coolant. Its amazing for driving in rain.

[@NotCheezzy]

​@JordyP89 Rainx works for a short period of time, but then you're contaminating your coolant.

[@rextransformation7418]

0:55 Where to find it? And how long does it last?

[@ChristopherVo-z6u]

Where'd you buy the screen at 0:56?

[@alanrawson-wg8io]

Never used Flycutters on ferrous metals except cast iron. They work great on aluminum and bronze alloys. Great videos. I can smell the Trimsol.

[@eviethekiwi7178]

i see we're making things up as usual in the comments section

[@chrishill6276]

I have only ever used mine on steel. Good Finish. What’s the problem?

[@dadgarage7966]

​@@eviethekiwi7178Also, never use flycutters inverted.

[@ojhamechanist1810]

माइक्रोन में फिनिशिंग 🎉🎉🎉

[@ipadize]

0:56 we have the same ones^^

[@Inatool]

What coolant are you using in your cnc mill?

[@OctaneWorkholding]

Qualichem 251C

[@Inatool]

@@OctaneWorkholding Ok, I haven't tried that. I have tried others and depending on the use of the machine the coolant sits in the tank undisturbed and goes rancid quickly.

[@OctaneWorkholding]

​@@Inatool Qualichem 251C doesn't have any of those issues. It even smells like oranges.

[@Inatool]

@@OctaneWorkholding Ok, I might try some. Do you purchase the coolant from a US distributor that will ship a 5 gallon bucket?

[@dans_Learning_Curve]

New sub.