Macrame Dream Catcher Tutorial DIY

[@PrettyKittyVee]

Thank you SO much! I just finished mine today (worked on it for 2 days). It’s my very first macrame project and I came into it not knowing a single knot! I love the finished art! Thanks again! ❤️

[@monicabhandari6815]

Wow it came out very well and found it super easy with ur guidance

[@mariadelcarmenboron9139]

Hermoso!Gracias desde Argentina!

[@jessicamarleau415]

Loved it. Found it hard to follow due to camera angle if you could put camera in front more would be easier for us blind folks to follow. Stunning outcome well done my dear. ❤ Love to continue to follow if I could see the project a tad better. All in all fantastic thanks!

[@MandalaBunnyhome]

Hi, thank you for the feedback! The camera angle changed in later videos when I had a better setup :)

[@greetjenijdam]

Thanks you for thuis great update.

[@dariiastudio]

I made a small one) great tutorial

[@alejandroschweinsteiger2081]

Hola, buenos días. Muy bonito trabajo soy Alejandra desde México. Me gustó y lo boy a intentar nunca he hecho uno. Felicidades

[@prernasaha3555]

Hey! Thank you so much for this video I'm trying to make this now and struggling with the half hitch knot - could you write it out or link me to another video that shows this in a bit more detail? Thanks again!

[@MandalaBunnyhome]

Hi, this is a slightly different design but it shows a little clearer how to attach it to the ring kzbin.info/www/bejne/Z6vVo42jbZydbKc

[@martinebeliveau1393]

If i want a 2 Colors dreamcatcher, do you think i can use your tutorial?

[@MandalaBunnyhome]

You can use 2 colors and put them in any order, just make sure the pieces are symmetrical when you attach them.

[@lauracatfernandes]

Love this so much!!! Do you think it works well with braided cord or is it better to use the twisted one? Thank you so much 😊

[@MandalaBunnyhome]

Braided should be fine

[@labdhitatiya7869]

Explained with details! Thank you

[@beatatalas4919]

I started doing this as a gift, but i stopped because i simply cannot do the double half hitch knot..:/ can you reply with a short tutorial? Maybe it is simple, but i can not figure it out how you do it.

[@MandalaBunnyhome]

Hi, you may want to try this video kzbin.info/www/bejne/pIOVmp18g9pjqKM

[@beatatalas4919]

@@MandalaBunnyhome thaank you 😊

[@mangagiridhar9962]

Beautiful! Nice video too! 👌

[@tanyabirthisel4029]

Hi very beautiful design I am in the middle of doing this design but was wondering how ,many twist knots were done on the end cords please

[@MandalaBunnyhome]

Hi, I did them around the spiral knots pieces on the ends, the square knot chains, and the middle section

[@Dgegcs]

Will 72 yards be enough for this project?

[@MandalaBunnyhome]

It should work if you do it this way: cut your 16 x 160 inch pieces, work through the whole dreamcatcher until you get to the part where you wrap each section, then use what you trim off to cut all the other pieces. You will have enough waste after trimming to cut all the other pieces.

[@ciporapodhorzer4607]

Very good tutorial, I can't wait to get started.

[@ceciliab831]

Me encanto! Recién lo termine!

[@glammess21]

I've done this twice now and I am pulling ridiculously tight and the back loosens everytime. What am I doing wrong?

[@MandalaBunnyhome]

Do you mean the beginning where you're doing the double half hitch knots on the ring? Your first knot of the double half hitch is coming loose while you're making the second knot (to complete the double half hitch). Try holding the first knot in place with your finger until you complete the second knot so it doesn't loosen. If that's not what it is then please let me know more specifics. Thank you for watching!

[@glammess21]

@@MandalaBunnyhome thank you for replying. No, I'm very well versed in macramae... normally... my knots are super tight. I hold very tightly before looping the last part of the half hitch and hold very tightly all the way through. I got the entire thing done and the back loosens up and the bottom loosens and drags. I have a picture of it. I'm so disappointed. I've done this twice now and it has done the same thing each time. I'm using a 19 inch hoop, but I adjusted length and amount of cords to accommodate.

[@MandalaBunnyhome]

@@glammess21 I'm not sure unless it has something to do with scaling up the project. You can send me a picture on instagram @mandalabunnyhome and I can see if anything stands out, I'm not sure why it would be coming loose.

[@estiloFaty]

Que fácil y bonito!

[@triannedarmawan7015]

how many cm is in each rope

[@lesptitschou59nathetjose81]

Bonjour. 4m c'est la mesure du fil plié ?

[@janbronkhorst965]

Loved the pattern and end result, however a lot of cord wasted on the 16x4m requirement.

[@MandalaBunnyhome]

Hi, the main reason for that length is the square knot sections and somewhat the spiral knot sections, I tried going shorter but kept running out there. I may try to rework it to make some of them shorter, but the variation in the different knots makes it hard to set the length.

[@artbyanjali7163]

Beautiful💕💕

[@wagishaadishree]

What macrame is that ??

[@triannedarmawan7015]

I don't understand the sign (") in the description

[@MandalaBunnyhome]

It means inches

[@triannedarmawan7015]

@@MandalaBunnyhome thanks ❤️

[@ItishaAggarwal]

Hi so 8’’ as is radius or diameter?

[@MandalaBunnyhome]

Diameter

[@gamzegizemyldrmbahceci1540]

Hi. I'm writing from Turkey. Very nice dream catcher. I wiil do the same :)

[@danutamaciejewska4344]

Piękna

[@NurAzizah-gs8sf]

Is it okay if I make this one and sell it?

[@MandalaBunnyhome]

Sure just put “pattern by disorderlystitches” somewhere in your listing

[@NurAzizah-gs8sf]

Okay, thanks!

[@michellesmixedmediamadness]

Lovely!! Thanks for sharing.

[@juandashandmade3274]

Hello! What if I'm going to use 14 cm in diameter ring?

[@MandalaBunnyhome]

You need an 8 inch ring, it won't work with a smaller one

[@ruby07241]

what adjustments could you do for a 10 inch hoop.

[@MandalaBunnyhome]

It's hard to say because that's a big difference from the 8" hoop, I don't really have any advice for that, sorry. Maybe try a smaller project to experiment with it? One assumption I would make is that since you're adding an extra 25% to the hoop size, maybe you could multiply everything by 1.25 so it adds 25% extra to all the pieces? But again that's just a thought, not sure if it works like that lol

[@blaise1582]

ruby07241 hiya, did you try this out? And what did you do in end? I have a 10 inch hoop as well so just wondering what I should do. Thank you.

[@ruby07241]

@@blaise1582 No I havent. I need to order more cord,

[@blaise1582]

ruby07241 hiya, I gave it a try with my 10” hoop and used 4.5 meters I wouldn’t add any more than that. Good luck :)

[@tinad.8634]

Am I correct, this uses 208 feet of cord/rope?

[@MandalaBunnyhome]

230 ft

[@geanebrito1501]

Perfect 🥰🤗😘

[@TheSxcanychka]

Would it work on a 14” ring? With 4mm?

[@MandalaBunnyhome]

I dont think it would scale up to that size without making a lot of adjustments

[@lauratarry2172]

Hi @mandalabunnyhome I love your dreamcatchers and have made them on 20cm hoops. But we are aiming to make some for a charity ball on 40cm hoops! Can you help? X Laura

[@emilyjohnson5009]

Is it okay to use 4mm cord instead of 3?

[@MandalaBunnyhome]

I probably wouldn't for this project unless you also use a bigger ring because the pieces will take up more space around the ring. You'll also need to cut them longer since the rope is thicker.

[@katlynadams9319]

How long is the finished product?

[@MandalaBunnyhome]

25" long but you can make it shorter (or maybe a bit longer if you have enough extra rope)

[@katlynadams9319]

Beautiful work thank you for your response!

[@Whitehacker-rd9gb]

Beautiful star macarame - www.ebay.com/itm/184797863710 Yellow color special macrame - www.ebay.com/itm/184797867645 Balck beauty small dream catcher - www.ebay.com/itm/184797871349

[@vidabonita8530]

Hermoso!!

[@carmemsilva7489]

Lindoooo!!!!❤👏👏👏👏

[@nouranelfaramawy7074]

im confused, in the video you say only use 16 ropes 4 m but in the description something else

[@MandalaBunnyhome]

The video lists the pieces as you go, you will use all the pieces in the description

[@nouranelfaramawy7074]

MandalaBunny would you please tell me all the measurements in cms?? and where do i put the longest ones in the middle or the sides?

[@nicolemostade2324]