[Made by me] How to install Onduline Base step by step

[@davidturczak7253]

My brother installed this over shingles on a 16x80 mobile home . He did some frame work over the shingles like you would do with metal panels but I have to say it was a cheaper alternative and will get him by for years . Thank god I was tired of going on the roof with him putting tar in areas where he guessed it was leaking. Had not leaked since thank god ! Been two years. 😆

[@OndulineGroupOfficial]

Hi David, thank you for your feedback! We’re so happy that now your brother has been living under a safe roof for two years ☺️ Have a great day!

[@rui4659]

underneath the corrugated panels is the water proof a PVC membrane? Another question i never understood: When we fix the panel to the plywood base, arent we making holes on the water membrane and ruining it? Thanks

[@robbo19811]

Can you advise how you can cap off the top end on a pent shed? I’m interested in using these instead of felt 👍

[@OndulineGroupOfficial]

Hello, of course. For the UK, this is in our installation guide under section 2.9: uk.onduline.com/en/professionals/tools/installation/onduline-sheets-installation Feel free if you have anymore question. The Onduline Team

[@michailbaroutsis3076]

Hello, thats a great product idea. Can install it directly on an existing pergola with beams in every 45cm ?

[@OndulineGroupOfficial]

Hello, thank you for your comment. Indeed Onduline Base can be installed on an existing structure. After removing the old roof, you can install it either on battens spaced 45 cm apart, or on a continuous support (OSB). Onduline Base is ideal for both renovation and new build!

[@michailbaroutsis3076]

@@OndulineGroupOfficial thanks for your answer!

[@davegreig8933]

“The overlapping of the sheets is done in the opposite direction from the prevailing wind” I’m thinking of installing this but the side of my workshop faces the prevailing wind. How does this affect water ingress in the overlaps and in the apex gaps?

[@OndulineGroupOfficial]

Our products and warranty have been designed for installations which are according to our guides. Unfortunately, we do not have any tests for scenarios outside our installation guides. The Onduline Team

[@joylati6925]

Can we install onduline or onduvilla sheets on top of our existing PVC roof?

[@OndulineGroupOfficial]

Hello, we appreciate your interest. Unfortunately, we do not propose that profile in plastic sheets at the moment. Our range focuses on the Classic, Base, and Easyfix profile. Here is a link to help you: uk.onduline.com/en/diy/products/onduclair-polycarbonate-diy Feel free to explore our other options or reach out if you have any further questions. Thank you for your understanding!

[@johntaylor4567]

Which side of the sheets should be facing up/outwards?

[@OndulineGroupOfficial]

Hello! The colored side, with the "canvas" surface appearance, should face the sky. If you would like more information about the installation, here is a link that provides a step-by-step guide for achieving the perfect installation : uk.onduline.com/sites/onduline_uk/files/2022-05/onduline-easyline-diy-leaflet-2022.pdf Have a great day!

[@azza1793]

So no way to close off the corrugations at the ridge or the eaves leaving very inviting gaps for birds to nest or even rodents

[@OndulineGroupOfficial]

Hello! We have two different types of eaves protection: 1. ONDULINE Eaves Ventilator. www.ondulineshop.com/Catalogue/Onduline/Onduline-Eaves-Ventilator-UOAOO-EAVES-VENTS 2. Onduline Foam Fillers. The first offers more airflow/allows for more ventilation. www.ondulineshop.com/Catalogue/Onduline/Onduline-Eaves-Filler-UOAOO-EAVES-FILLERS Feel free if you have more questions. The Onduline Team

[@metarich2451]

Are these sheets safe to stand on? He appears to be stood on them on the other side during installation. If so, is it only possible as it appears to be on a solid deck?

[@OndulineGroupOfficial]

Hello Meta! Thank you for your interest. Working on roofs can be a hazardous operation. Personnel should walk on roofs only if this is absolutely necessary. Avoid walking directly on the corrugations where possible. You should use planks or ladders laid flat and supported by the roof purlins, to carry out maintenance and related work. On steep pitches use specialised safety equipment. We hope we answer to your concerns. Feel free to reach if you have more questions. The Onduline Team.

[@metarich2451]

@@OndulineGroupOfficial that makes perfect sense. Thank you. Just waiting on my sheets being delivered now. I do only have a 10° slope however. Instructions say to use a full deck or close battening. It doesn’t say how close though. It’s for a pergola roof. How close would you mount battens? Sorry for questions here. I have emailed but had no reply.

[@OndulineGroupOfficial]

@@metarich2451 Hey! We’ll get back to you very soon to answer your question. The Onduline Team

[@OndulineGroupOfficial]

Hello Meta, thank you for your patience. Here is the answer to your request: In the UK for instance, we would consider battens every 30 cm as “close battening”. We would also recommend min. 50 mm wide battens in this kind of application. Hope it’ll help you. Have a great day

[@metarich2451]

@@OndulineGroupOfficial perfect. Thank you for the clarification. I’ve done the job and had already decided to fit the battens at 30cm but used 38x88mm battening. Must say, very impressed with the results. Ease of fitment and look good too. Thanks again. 👍

[@Mike-jx2uj]

I recently installed mine over some plywood and membrane. I’m wanting to install some insulation inside my shed. What’s the best way ?

[@julietbelono-ac1606]

How many grobs you n overlapping?

[@OndulineGroupOfficial]

Hello, thank you for contacting us for an installation on a normal slope (>27%) we recommend covering 1 corrugation for a side overlap and for an end overlap of 20cm. For a low slope (9-27%) for a side overlap we recommend covering 2 corrugations and for an end overlap of 30cm. If you need more information, please contact the local team : www.onduline.com/en/find-your-country

[@waynerobinson878]

im putting mine on apex shed roof how do you cover gaps at the front.?

[@OndulineGroupOfficial]

Hello! You can find the explanations in our technical book, point 7 on page 11 uk.onduline.com/sites/onduline_uk/files/2020-04/ONDULINE%20CLASSIC%20Technical_book_roofing-UK_0.pdf ! Hope that helps.

[@tukangndesoamatir]

mantap 👍👍👍👍

[@OndulineGroupOfficial]

😄😄

[@MrBryan6906]

Who owns that shed, a dwarf?

[@OndulineGroupOfficial]

Hello! This shed can be used for different purposes and its dimensions are standard. Feel free to ask if you have any question.

[@jendub55]

Brilliant English video

[@OndulineGroupOfficial]

Thank you very much 😊

[@JoseReyes-fr9yj]

@@OndulineGroupOfficial

[@liviustefanache5443]

👍

[@vilarinocliciomaia9307]

Não presta..

[@corneilcorneil]

Amateur level