[Made by me] How to install Onduline roofing step by step

Onduline sheets can be used for DIY applications: pergolas, patio, extension, carport, garden shed, green house or leasure housing... Compact, easy to transport and to install, flexible, available in different colors, Onduline is an ideal solution to realize all your creative ideas for your garden!
Find us on :
www.onduline.com/en
Twitter Ondulinegroup
Facebook ondulinegroup

[@gillard125758]

Phil - Flatter roofs require more support as its lesser slope does not redirect roof loads as efficiently. Also, snow and rain loads shed off faster on steeper sloped roofs. Jamie

[@smezley50]

I have installed Onduline on the flat roof shed and I'm very pleased with it and how simple it was to install. I am now considering installing it on my summerhouse / office and adding some insulation would help to keep it cool in the summer. Can you tell what was the insulation you used? Thank You.

[@OndulineGroupOfficial]

Thank you for your message and your interest in our products. The choice of insulation will depend on the performance you need. For instance, you can refer to the basic specification from Kingspan TW50 1200 X 450 X /100 or 25mm or for more general purpose the polystyrene EPS70 - 2400mm X 1200mm X 25mm as used in the video. We invite you to directly contact our team in the UK, they will be able to assist you onduline.co.uk/contact/ Onduline Team

[@Joemccxc]

Russell: Make sure you wear PPE, especially the hard hat. Richard: Naaaah. 😄

[@grimbleahoy]

on a single pent shed, is there any add-on to create a drip at the top end to stop water ingress?

[@mmd1957]

Wouldn't strong wind drive rain under the top ridge as there are gaps with the corrugated sheet and the flat ridge material?

[@georgetellis9483]

Highly likely.

[@fatphilg]

Just a quick question... Why does a flatter roof require attaching at 45cm and not 61cm points? What adds the need for this extra security?

[@namiroraha7473]

wind load will be greater ......

[@carmelinarosinski8953]

My adventure with the tree began with projects from Stodoys.

[@JohnDoe-xl1qs]

can I get this in different lengths and colors

[@mmd1957]

Im asking as I am considering using Onduline and want to ensure it will be watertight.

[@OndulineGroupOfficial]

Mike Shipman Thank you for your enquiry we are pleased to confirm the following: The Onduline roofing system when laid in accordance with our fixing instructions with sheets cut tight to the ridge line abutment will remain weatherproof in storm force wind conditions. So whilst it is possible to seal the corrugations with eaves corrugation filler strips at the ridge, this action will close the high level roof ventilation which unless other ventilation provision is made will result in a significant increased condensation risk within the building and is therefore not recommended. The Onduline instructional films available on line should be of assistance: www.onduline.co.uk/videos/ We hope these notes are of assistance.

[@namiroraha7473]

do you sell it in Australia?

[@davidphillips2259]

How much

[@OndulineGroupOfficial]

Hi David! Are you asking about the price of our products or the time required to install it? Happy to help!

[@twagner6155]

There is no need for purlins.