Propellers [Long Tail Tips #2]

Dan explains how to change propellers and the benefits of the different sizes of propellers used on Mud-Skipper Long Tail Mud Motors

[@cory2450]

Great information, I wish I had this knowledge when I got my first long-tail!

[@MADSLife]

It's taken a lot of time on the water and a few busted props to figure all this out

[@turneynicholas]

Do not beat on your prop with a hammer! Use an adjustable wrench open it till it slips on the shaft behind the prop and hit the wrench

[@outdoorliving8254]

Like the videos about the long tail but I would like to see some more videos with the tips and tricks for the long tail

[@DennyOutdoors]

What kind of kit are you running

[@johnconnor6725]

Wow , 6.5hp on a boat that little. My 17' canoe goes fine using a tiny weed eater motor and cheap model airplane plastic props 8"-10". $0.02

[@danieloficialpescador3789]

😬😬😬✌🏻✌🏻👍🏻👍🏻

[@VanTran-oc6ki]

Very good and intelligent

[@FishAlhasmooty]

I'm from Iraq and we do not have a fan driven how to make it myself

[@MADSLife]

They shouldn't be too hard to make yourself, the people of Thailand have been making them at home for 50 years +نجم عبدنور الحصموتي

[@vladimirputin854]

You ever got ya boat setup?

[@steveoneal8608]

What are you wearing on your wrist? GPS device? What brand is it?

[@FishAlhasmooty]

What is the total length of the propeller until the engine

[@MADSLife]

It has a 90" shaft +نجم عبدنور الحصموتي

[@FishAlhasmooty]

I thank you my dear friend

[@kb7uxe]

you change between 7 and 9 inch prop.. is that the diameter or pitch ? and with is the diameter and pitch of each prop ?? Thank you.

[@MADSLife]

+kb7uxe it's measured by diameter, pitch seems to stay the same between all of them. I wasn't able to find an official measurement for the pitch

[@Littlecooks5]

What kind of watch is that

[@MADSLife]

Sony action camera has a watch to control it, not sure if they still make it tho

[@enrgyweare8572]

Love your videos man very helpful. I just built the beaver dam kit an live in monroe as well, keep an eye out for me.

[@gftggghhy58]

عاوز اصمم هذا الاختراع ارجو الترجمه باللغة العربية

[@jakemorrow4549]

I was watching your troubleshoot video and my motor will tend to crank and die out of the water kinda angled and when it hits the water it completely cuts off any ideas ?

[@MADSLife]

+Jake Morrow add oil or disconnect the oil shit off

[@jakemorrow4549]

what brand is the motor you have on it

[@MrOutback28]

awesome info. thanks for sharing

[@captainpegs0740]

What engine and hp do you have on this boat?

[@MADSLife]

+Captainpegs07 6.5hp 212cc

[@lightmeupsigns5363]

good vid try doing this with an outboard motor in 3" of water LOL

[@johndoee4511]

Thanks for the info, great video

[@franciscocarloscarlos1628]

Brasil

[@jpguidry6969]

America

[@STKO2011]

Would the bigger prop be better in a river with a lot of current for the thrust/torque going upstream? Versus the smaller prop in slow/no moving water like a pond or lake for speed.

[@MADSLife]

That would work, 7.5 is a good size for a river, any bigger and the engine may start to struggle a little and it's not fun when it cuts out in the middle of a rapid.

[@STKO2011]

+Danny Giles good to know!

[@MADSLife]

Best thing to do is get one of the packs with multiple sizes, bring them all with you and find which one fits your needs the best. Some people prefer the low torque of the 6". I don't mind having to use a little more muscle with the 7 or 7.5" to get the little extra speed. You just have to remember that bigger prop doesn't always mean higher speed.

[@STKO2011]

+Danny Giles I was reading smaller prop will spin faster at the same rpms as larger prop. Resulting in faster speeds with small prop vs acceleration with large prop