Magura MT5e hydraulic disc brake set explained & review

Did you ebikes brakes go out or do you need more stopping power the Magura MT5e will help you stop faster. ‪@sixtiesrider‬ explains everything you need to know about these brakes from which ones are the rear to what makes them stop better.
Buy them here: www.stackedbmxshop.com/produc...
View more brakes here: www.stackedbmxshop.com/collec...
*The little yellow plastic piece can hold your cable or prevent your brake pads to compressed

[@_0331]

Can you make a video about their switch.. I'm confused about the "normally close, normally open" features of the magura brakes thank you

[@ballandpaddle]

Yo, you trying to hook up Magura brakes to a Bafang system by any chance?

[@Stackedbmx]

It is just saying it will control the brake light and motor cut off.

[@ballandpaddle]

@@Stackedbmx So I guess it does work, it's just that the Magura connector is 2-pin (red) and the Bafang is 3-pin (yellow). But you can still plug them into each other and it'll work

2mm thickness rotor ? or 1,8 thickness, i can not put my mt5estop on storm hc 203, because they are 2 mm thickness in manual it says max 1.8 mm thickness, and magura does not sell 1.8 rotors, stupid them i spend many money for nothing and still need a new 1.8mm thick rotor. anybody know a 203. 1.8 mm thickness rotor ? not to expensive ?

is this price oke for a hope 203 rotor ? 75.99 € euro ?

[@edgurash834]

I am really cofused on which one of the Magura ebike brakes I should buy for my current ebike controller. Should I buy the MT4e closer NO or the MT5e Opener NO. I did a test to try to figure it out. But I am still confused on which to get. When I unplugged the sensor from my current brake levers. I am still able to throttle the ebike whike pressing the brake levers. Also the rear brake lights do not come on. Knowing this, which one of the Magura models should I purchase?

[@Stackedbmx]

What bike or controller do you have?

[@edgurash834]

​@@Stackedbmxi got it figured out, my friend. Thanks for responding.

[@cosworthwalton7766]

Can the red brake connector be cut if you dont have a automatic brake systmem or the correct model for it to fit

[@Stackedbmx]

Yes. The electric cable is just the motor cutoff. You can also cut it and slice it to your existing motor cut-off

[@embraceuncertainty7127]

I have seen a video showing how you can connect mt5e to a Bafang mid by removing the alignment tab and turning the plug. Does this work?

[@Stackedbmx]

I haven’t personally done it but I seen a video with it and it makes sense. I will try it out and let you know my results

[@embraceuncertainty7127]

@@Stackedbmx Yes, let me know. I still have not connected the brakes to the controller. I sometimes use the brakes when the power is engaged under certain tricky conditions.

[@obeii1805]

2 questions 1. The red in part don’t fit on the onyx rcr is there a connector I can use or I ave to solder 2. Do the mt5e needs to be bleed Thx

[@Slowron215]

yes they do need to be bleed

[@Stackedbmx]

They come bled. If you need to shorten the cable you might have to bleed them. If the connectors don’t fit you can splice the together or remove the connector tab. I’ll post a video soon

[@sergioarmartinho]

thanks for the video, need some help. i got the mt5e for my super73 rx mojave, but when i plug the brake light, they work inverse, - not braking light break on - when i breaking light break off - do you know how to adjust that?

[@Stackedbmx]

Not sure why it is doing that. I will research it and get back to you