Maiden Flight of the Top Flite Cessna 182 (Build Series part 13)

[@roddraym]

Just reaching your maiden. Thanks again for sharing each of your videos. It's been a pleasure learning from you each step of the way!

[@BayonasRCWorld]

Thank you for watching my videos I truly appreciate it.

[@edwardcase]

GREAT!!! that first landing on a turn was slick....nicely done with a flair!

[@rogeriocusin4045]

Congratulations my friend !!! You did a wonderful job on that plane ! One time I read in somewhere a beautiful phrase that said: ( I believe the English translation is something like this ) -You should never put so much effort into assembly (caprice) that you are afraid to fly ! I would be shaking my legs to fly this plane but you did it very well !!! Congratulation my friend and thanks for sharing this series of videos with us! A big hug from a friend from Brazil

[@BayonasRCWorld]

Thank you for the kind words and I really appreciate you for watching the build videos.

[@edwardcase]

Beauty color scheme...Lovely Aircraft...

[@BayonasRCWorld]

Thanks a lot!

[@elton6615]

Perfeita construção, estou num projeto desses e seus vídeos vão me auxiliar muito!!! lamentável vc não ter onde voar com tranquilidade, um aeromodelo desses deveria ir para exposição, muito grato pelo seu trabalho, isso é arte... parabéns, de um fã Brasileiro!!

[@BayonasRCWorld]

Thank you! Have you watched the recent video I have posted on the Cessna 182 Cleared for takeoff?

[@BayonasRCWorld]

kzbin.info/www/bejne/qpzWZYeHZ9Sajrs

[@elton6615]

@@BayonasRCWorld yea!! perfect, this is my favorite model, the most beautiful flight for a stopover!

[@BayonasRCWorld]

@@elton6615 thank you my friend

[@farayidarlingtonchaparadza20]

Best build I have ever seen. I watched through the entire episodes tonight. A phenominal job. Your hand skills are unmatched. Subscribed immediately.

[@BayonasRCWorld]

Thank you very much! I appreciate it very much

[@dollarbillclinton4327]

I watched your covering video ( more than once),,,,GREAT JOB I learned ,,,,,,,,😎,,keep making videos and I will keep watching,,,,,,,😎

[@BayonasRCWorld]

Awesome! Thank you!

[@tracythomas1161]

Your video content is spot on. You know when to offer advice and when to let the build speak for itself. Excellent build series on the 182. Thanks for the tips and tricks. Don't give up on building planes just because of a lack of airspace, low and slow STOL planes offer a great flying experience to a lot of us.

[@BayonasRCWorld]

Much appreciated!

[@sorenwolff4954]

Hearty congratulations, well done! Thanks for the explanation regarding airspeed on final. It did look intimidatingly fast. Speaks well of your flying skills.Truly a masterful build. Hope to see you take it up again.

[@BayonasRCWorld]

Thank you and once I find a better location I would love to do a better video for sure

[@sorenwolff4954]

@@BayonasRCWorld I'm very lucky where I have ended up flying. I fly out of an empty airport in Northern CA. Only traffic is the occasional cub doing a touch and go. Other than that it's completely empty no Services whatsoever. Plenty of room for big planes! Looking forward to the next flight!

[@BayonasRCWorld]

@@sorenwolff4954 oh how I wish to just have a dedicated flying field here on Guam. I am doing my best to try and get something thru contacts and or thru our government.

[@ROLXXII]

G'Day from Australia! I found you after watching Andrew Gideon's channel, as he correctly stated you're a true master modeller. I love your channel and look forward to spending many hours watching your brilliant work.

[@BayonasRCWorld]

Thank you. Andrew Gideon is one heck of a guy.

[@rcdogmanduh4440]

Beautiful build !

[@BayonasRCWorld]

Thank you

[@MrMadtractor]

oh man the most wanted video of 2020

[@MrMadtractor]

sorry about the ultimate man! but that’s cool the cessna is up and flying

[@BayonasRCWorld]

@@MrMadtractor yeah what Happened to the Ultimate sucks.

[@ggillouxx]

Congrats !

[@BayonasRCWorld]

@@ggillouxx Thank You.

[@671rcourtney]

Great job on the building and that beautiful aircraft. Glad the maiden flight was a success. Keep up the great work whether it leads to more plane builds or switches over to heli's. I can personally attest to your abilities to rock the heli's in build and 3D flying. :-)

[@BayonasRCWorld]

Right on my brother!

[@erickczech1656]

Awesome looking plane! I have the same kit and would like to build mine using the same techniques in your series. Really enjoyed it. Thanks!

[@BayonasRCWorld]

Cool, thanks! I would love to follow your build as well.

[@mikebotkin2008]

Awesome build and plane! Sorry to hear about the Ultimate Bipe loss. Goodness! We take so much for granted in having open fields here in the States...

[@BayonasRCWorld]

Thank you! Yes I am still battling the field issue here on Guam. Reason why I have not made any new KZbin videos just yet! I haven't flown since my last video of the FT mini Corsair. I really need to get off this Island however this is my birth place and I have obligations here. One day minus today I will be somewhere back Stateside once again.

[@mikebotkin2008]

@@BayonasRCWorld Roger that. Hard to pull up roots and leave family. Found your channel via Andrew Gideon’s ch. You remind me of one of our medics when I was at 283rd MEDEVAC 96-99 at Ft Wainwright, Alaska.

[@BayonasRCWorld]

@@mikebotkin2008 if he is from the Island then I get that alot hehehehe.

[@mikebotkin2008]

@@BayonasRCWorld 😳😆

[@mikebotkin2008]

If you had the room to fly, I’d say it’s time for a Bud Nosen P51 or C310 build for ya! - you’ve definitely got the superb build skillZ

[@edwardcase]

Oh God the Ultimate bipe....aww man. So sorry about the bipe

[@freemansfocus]

Great maiden! I have to admit, that field looked a little sketchy for the Cessna, but a nice job of greasing her in for landing. You should build a model of Blue Thunder.

[@BayonasRCWorld]

Yes this field is not for this kind of plane. I would say great for foam planes and helicopters. This is the first and last time I will ever use this field for any Gas planes of this size. I will fly my helis there for sure. I thought about a Blue Thunder build however Vario helicopters use to sell the fiberglass fuselage kit but I don't see it anymore.

[@adelaseeri1892]

Congrats!! I have the same kit, only you did a much better job with the finish, fiberglass and paint looks way better then monokote, careful with the flying spot these Cessnas carry some momentum and keep rolling after landing, I flew at a field similar to where you flew, Landed perfectly fine only flapless it kept rolling further then I thought and wing tip hit a metal pole, very minor damage to the tip, but I wont be flying there again.

[@BayonasRCWorld]

Yeah I will not be flying at that field as well with the Cessna or any other gas planes. That field is just good for helis and foamies.

[@leonardogarcianunez5922]

Felicitaciones. Excelente vuelo.

[@edwardcase]

Did you inspect the elevator servo's internal motor? What fried the Amp, or the motor?

[@SomeGuyInSandy]

Andrew Gideon sent me! Subbed!

[@BayonasRCWorld]

Awesome! Andrew Gideon is just plain awesome.

[@Ed-eq8ui]

Great video -- as usual. Thanks! I'm building a Gold Edition TF Cessna 182, and I'm hearing that the CG in the manual puts it tail heavy. What's your experience? Where did you locate the CG? Thanks.

[@BayonasRCWorld]

I followed the CG location as per manual and plans. By the nature of the kit and built up tail section the tail is just heavy. Therefore you either make accommodations to try and reduce weight without compromising structural integrity. The manual CG location is where mine is set in all my flight videos here in the channel. To get the proper CG i had to add lead weights up front. I added some lead weights epoxied to the very front of my cowl. My Cessna 182 is heavy around 14.8lbs however she flies smooth and controlled without any bad habits. She comes in nicely with full flap down and during takeoff with half flaps. Excellent flying model.

[@BayonasRCWorld]

have you seen this flight video. Well I tried to make it realistic. kzbin.info/www/bejne/qpzWZYeHZ9Sajrssi=yEu8MNNZ3uoTxqpP

[@shimonklein]

Hi how are things? a query. What is the engine cylinder size in this video? .62 or .91? Thanks a lot

[@BayonasRCWorld]

It is a Saito FG21 or a 1.26 4 stroke

[@FranksModelAviationWorkshop]

Dang! I feel your pain man. That was a beautiful Ultimate. Are you going to build another one? That Cessna is beautiful!

[@BayonasRCWorld]

Yes I will build another Ultimate with same color scheme.

[@FranksModelAviationWorkshop]

@@BayonasRCWorld do you already have another kit in the stash?

[@BayonasRCWorld]

@@FranksModelAviationWorkshop nope but I could scratch build another this round. Just be a longer build compared to having a kit.

[@FranksModelAviationWorkshop]

@@BayonasRCWorld www.fiberglassspecialtiesinc.com has the cowl and wheel pants for it. Are you sticking with the Goldberg kit plans?

[@enriquech4041]

Did you have all those kits hidden in a vault? Almost impossible to get any of those nowadays!!!!

[@BayonasRCWorld]

I got lucky on ebay as far as finding it. I wanted it so I paid for it for sure. Around $350 per kit and $100 in shipping to Guam.

[@enriquech4041]

@@BayonasRCWorld Lucky you¡¡¡

[@andrewbartley2251]

Hi Love the build, fantastic. Did you do any videos regarding the installation of the robart noseleg, the saito fg21 install and muffler configuration. Any help would be appreciated. Thanks Andy

[@BayonasRCWorld]

I do have some photos in my facebook group Bayona's RC World.

[@BayonasRCWorld]

at the time of the making of the last video I did not have the Saito FG21 in yet. It was still in the mail system at the time!

[@sgot382]

Hello, Sorry your ultimate crash.. The Hitec Servos are not bad servos, But... Try those PROMODELER servos: www.promodeler.com/DS470BLHV OR www.promodeler.com/DS360DLHV =)

[@BayonasRCWorld]

The specs looks really awesome. I gotta look more into this. I surely appreciate the link and info.

[@Tadrjbs]

Video?....not so good. Takeoff and landing flair should approach toward the camera. Field size not the issue. Camera placement is....Moses

[@BayonasRCWorld]

Working with what I have. A cellphone strapped to my head! Hehhehehehehe.

[@BayonasRCWorld]

Maybe next time once I find a better field without being so close to people, houses, bldgs. I will do a better video for sure. This video was just to get the maiden flight out of the way.

[@rcdogmanduh4440]

Oh man!