Well, it's a Walmart brand so.. everyone that's bought it.
@chanikyach46355 ай бұрын
Me 😢
@HaiJosephine5 ай бұрын
My exact thoughts... 🤣🤣🤣@@MissTaylorDani
@Rxckstarrrr3 ай бұрын
😂😂
@DejLavu3 ай бұрын
🙋🏼♀️ I bought 3 of these b!tch3s too🤣🤣
@kkbyday5205 ай бұрын
Very helpful! You saved me from returning this thing 😂 Thank you so much.
@nikkitobin83566 ай бұрын
Glad to know I'm NOT the only one 🤣🤣
@monicaorpinel23084 ай бұрын
Got it assembled perfectly, thank you!
@DMrKunst26 ай бұрын
There arent any pre drilled holes on panel G for the cam bolts for me
@thatboyss5576Ай бұрын
I thought the same thing. I screwed the wrong side down
@bigtasty276721 күн бұрын
@@thatboyss55763 holes weren't there for me. I had to use the 7d screw to make them
@zhanshuozhang13616 күн бұрын
I lost the F1 piece. Would it be a problem to stand the shelf without F1?
@hermithailey5 күн бұрын
there aren’t predrilled holes on D1 and C1 for me. i even checked the other end to make sure i didn’t do it wrong lol.
@MrsDeath-ut4uy7 ай бұрын
My nail doesn't go all the way in for the A1 panel is that ok?
@kellim.36517 ай бұрын
The nails from panel g and I1 don’t connect the two boards together. What am I doing wrong?
@jackcurymer29 күн бұрын
Thank you so much, you helped me a lot ❤
@tvonne413 ай бұрын
I follow step by step instructions and when I went to stand it up the top half came completely off damaging it 😤
@ItsmeJessYo3 ай бұрын
My shelves didnt come with instructions so this was helpful!
@jubaalasi5 ай бұрын
This was useful. I was gonna return this.👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾
@melisajones8672Ай бұрын
😂😂😂
@nikkitobin83566 ай бұрын
My pre drilled holes on g doesn't line up to c& d panels 🤷
@BijanSauri2 ай бұрын
What did you do? Cause im having that issue aswell
@sodapop16732 ай бұрын
thank you griffin you saved my marriage
@jessicafey66343 ай бұрын
Didn't come with a strap do I absolutely need it?
@ItsmeJessYo3 ай бұрын
It's for anchoring to the wall. If you have another way to anchor, then no
@sometimesiwander71462 ай бұрын
If I were you I’d put some shims under the front so that it would lean back into your wall. They are extremely flimsy and if you have kids or pets you risk it falling on them or any other family members in the event of an accident. You can get shims for under a buck at Home Depot or just make some yourself with a paint stick from Walmart. Better safe than sorry imo. Good luck. Aldo, the instructions said not to put anything on the top shelf which is just crazy imo for a bookcase bc everyone usually does, but if you look at the design you will see why. Normally the top noses would cover the side boards and the load would be carried crown the side boards. This design has the top board sitting inside the side boards. If I’d noticed that before I purchased it I would not have purchased it. Garbage design. Any weight you put on top of it will force the boards apart. Luckily, I only need it for paperbacks until I thin them out.
@Newstube8333 ай бұрын
Thanks
@RGBeats-v3vКүн бұрын
love you
@hollyblue32552 ай бұрын
Horrible of explaining things but kind of helpful but fixed the camera angle if you try to explain something.
@sometimesiwander71462 ай бұрын
Why don’t they show the top of the bookcase? I just bought two and the top two side pieces that attach to the top board are not finished!!! It’s just rough mdf board and it looks like absolute garbage! I’m tall so unfortunately I can see it and it annoys the hell outta me. I’m disabled so trying to return it is more than a major headache. Both boxes arrived damaged. I should have just immediately called to have them picked back up as the boards are damaged too, but I cannot believe that the two top side boards that attach to the very top board are not finished!!! Blows my mind. So if you wanna spray the dust off the top board that exposed mdf board is just gonna soak up any moisture. Absolute garbage design. Imo buy anything else.
@maxim_pch5 ай бұрын
This was usefull
@jamaicaramirez81327 ай бұрын
“G” is longer than what it’s supposed to be
@samaya.chantel7 ай бұрын
This happened to me too
@bruhmomentlive39995 ай бұрын
I think you can adjust the c1 side to fit over to the G panel
@BijanSauri2 ай бұрын
@@bruhmomentlive3999is that what you did, mannn idk what to do