Make a Japanese blacksmith's hammer, with an off center from an old sledgehammer.

[@松永昌芳]

You reused an old, pickaxe-like hammer. It's a good idea. The striking surface of the hammer used by Japanese blacksmiths is not a flat surface but a slightly curved surface. The reason is to let the hammer escape when hitting the material so as not to scratch the anvil's face. Occasionally, the corners of the hammer may get into the anvil's face, but a slightly curved surface will prevent deep scratches. from Japan.

[@martinuso7446]

Do you know the reason behind the off-center?

[@松永昌芳]

Mr.@@martinuso7446 　The answer to why is that the hole in the traditional Japanese blacksmith hammer is off center in the Japanese blacksmith's workshop. The anvil in a traditional blacksmith's workshop is buried in the ground as it is, and the master sits down and tells where to hit, but the hammer with a hole in the center of the partner's hammer is very low because the position of the anvil is low. It's hard to hit. So the hole is off the center of the hammer, not at the top. Also, since the center of gravity is concentrated downward, it is difficult to swing it up, but it is easy to swing it down. This is the result of devising a device that suits the original Japanese physique. from Japan.

[@martinuso7446]

@@松永昌芳 Aha! Thank you!

[@G1nSan3]

@@松永昌芳 i was always wondering. thank you for your detailed explanation :)

[@teuth]

inside every hammer is a smaller hammer.

[@lovejcdc]

Nice addition to your collection. Great video

[@urzmontst.george6314]

Really nice ,mate.

[@BrothersRestorationIndustry]

Great job 👍🌹

[@MrLaTEchno]

Like the steering of this kind of hammer[s] Good reuse of ''old''.

[@hrishipatil2045]

Nice work man, I saw your videos. But one small request, please use safety precautions like gloves and whatever.

[@ОлексійДубинка]

Часто проїздом на Сумщині. Постійно згадую що десь тут живе ТОЙ САМИЙ коваль!

[@eduardolloreda841]

Un genio !!!!...... seguramente es ruso !!!! Un saludo con admiración y respeto desde Argentina !!!!

[@dolphindolphin5627]

Не очікував, що така кувалда для Вас зручніша. Дякую за цікаве видиво!🙂👍

[@jesusperezgarza7272]

Buen video esta muy bueno felicidades por añadir este martillo a tu colecion

[@up2tech]

Fantastic smith. Great job :)

[@fourkings7897]

Poor hammer, he suffered a lot of abuse in his previous life... Now he shines again..

[@jefflitchfield4950]

That's a nice square hammer.

[@AMBOSS_Silesia]

It was a tinsmith hammer to be precise, but that's just a detail. Nice work overall!

[@kenwaid8239]

It’s called a “Dogs Head” hammer, nice job as always.

[@ShimonovP]

今日本でもあまり目に入ることはなくなってきたけど古い祖父の家ならこうゆうのがあったりするのよね

[@smellersTV]

Can I ask, what was that liquid you squirted into it when affixing head to handle?

[@CossackForge]

Super glue

[@smellersTV]

@@CossackForge okay thanks

[@wardigger36]

Я бы отреставрировал...Но работа как всегда классная,и в функционале молот прибавил)

[@AahzIzvr]

А для чего такие молоты нужны? в чем суть смещения? масса же одна и та же летит, не?

[@teeflex997]

What was the purpose of welding those 2 spots?

[@RESTORATIONOFSCRAPMETAL]

cool job, like👍

[@АлексейКаповский]

здравствуйте!Как всегда ,здорово!!!!НУ,,,,Молодец!!!

[@knives1174]

Do you still use the coalforge? 🔥

[@CossackForge]

in the following videos

[@hannemannironworks1651]

Great Dogs Head hammer mate!

[@dolfstromer3498]

Цікаво почути думку майстра, на скільки дана форма краще за класичну?)

[@CossackForge]

мне нравится больше, лучше контроль.

[@persioboni9373]

Excelente perfeito !

[@НикитаЛюбимов-я5ф]

а чем это вы температуру бойка проверяли, перед закаливанием?

[@CossackForge]

магнитом, при аустинитном превращении теряются магнитные свойства.

[@alkinkade]

Beutimus, not a Smith, but Wowsa....

[@maksimkrukov8612]

А что даёт такое смещение центра тяжести в работе?

[@CossackForge]

лучший контроль удара

[@hectorarmandogonzalezrodri2351]

Quedo hermoso

[@EAwert42]

shurap is it you?

[@CossackForge]

Life channel

[@ВикторМ-в6э]

Yes

[@sammypsycho8273]

Ok, here is my money.

[@РусланКопалкин]

Братец что это за наждак у тебя с лентой, как он фиксируется ? На деревяшку клеишь?

[@CossackForge]

Половина ленты 610 на 100, одета на войлочный круг.

[@jhasurbegmetov8837]

Объясните это русский канал или английский? Я не понимаю😅

[@CossackForge]

Украинский

[@dolphindolphin5627]

@@CossackForge,🙂👍🇺🇦

[@ВикторМ-в6э]

Это Shurap, по русски Дима. :-)

[@OceanicGyogō]

Handle is not Japanese

[@ПавелСоловьев-с9ш]

Кузня похожа на кузню Дмитрия Шевченко

[@drivernephi2115]

Whyyyyyyyyyyyyyy would you weld on rust it just makes me. Die

[@Ganebal2]

А где печь и шишки?

[@CossackForge]

в следующих видеоо

[@lukitosejati.m1783]

Maybe you could strart making some Damascus steel bruh

[@CossackForge]

my second channel about Damascus kzbin.infovideos

[@sameershaikh-s4j]

BlackSmith's

[@blackviewderevenskiy5744]

!!!

[@luismigueldominguez5487]

Is not a Japanese hammer..... Is just a blacksmith hammer, the design is very old, if you see the paint "LA FRAGUA DE VULCANO", From Velazquez, you can see a hammer like this...... And don't was imported from Japan.

[@unedited98]

You didn’t really make anything.... but it looks good.