I would love to walk around your shop just to look at all the tools you have made. Great craftsmanship!
@YoungJe3 жыл бұрын
welcome
@yeagerxp3 жыл бұрын
Excellent work👍👍👍 . Thanks for sharing
@ciroarienzo84093 жыл бұрын
Great work like ever mr yongje
@GWAIHIRKV3 жыл бұрын
Some home anodising- easily done - would finish it off and keep everything nice and clean. Brilliant as ever. . .
@MShahzaibwoodwork3 жыл бұрын
Very naic good job
@awldune3 жыл бұрын
Looks better than the one I bought. I like the wide footprint between the two bearings
@BensWorkshop3 жыл бұрын
Well made!
@douggilchrist51313 жыл бұрын
There is a good reason that you have become my favorite person to look for on youtube. I wait patiently to see what you will come up with next. As in this video, you always seem to be able to take a good idea and make it great. Thank you
@mariecandeias73552 жыл бұрын
Beautiful workmanship! A true craftsman 👍
@charleswilson89152 жыл бұрын
Ingenious, better than any commercial jig I have ever used.
@g81atherton3 жыл бұрын
I’ve been waiting for someone to do this! Thanks for breaking new ground!
@twoweary3 жыл бұрын
I made a stop block to set the angles on my planes n chisels , I wouldn't have thought to use my digital gauge to set it accurately . Even though I use all the time to set my table saw blade. Pure genius ( at least to my simple mind) ! Thanks for posting.
@WalterMelons3 жыл бұрын
I felt like an idiot when I saw him do that for not thinking of it myself.
@anthonys5553 жыл бұрын
Same here. Great idea
@toms41233 жыл бұрын
You are an artist
@slicwood2313 жыл бұрын
Exceptional work. and a nice infill plane as well!
@FritsvanDoorn3 жыл бұрын
That works well. Thank you.
@homemadetools3 жыл бұрын
Very nice job. We featured this video in our homemade tools forum this week :)
@keithspencersr.68063 жыл бұрын
Always loved that Birdseye maple plane, nice on this one.
@gotzolones3 жыл бұрын
Much better than the sharpening jig that is sold commercially. The problem that these jig sharpening usually give is that the bearings when rolling through the sanding end up being sanded as well and modify the degrees of inclination. I liked the system of cutting screws aligned in the wood
@jessjulian94583 жыл бұрын
You are very smart man. Thank you for sharing your talents my friend.
@YoungJe3 жыл бұрын
thank you
@jurikristjouw Жыл бұрын
Nicely done! If you replace the axel with an 8mm thread, it would hold the bearings snug. Also better to hold it with nuts instead of a spring for the same reason.
@debhaal3 жыл бұрын
You are an inspiration, as always.
@YoungJe3 жыл бұрын
thank you
@krenwregget76673 жыл бұрын
excellent design, well done.
@nperson Жыл бұрын
Very nicely done!
@beccabeth23 жыл бұрын
That's a good idea about the bearings I made one with bearings about 6onths ago got the bearings off Amazon 4 bearings for $8 they are so smooth.
@hassanal-mosawi42353 жыл бұрын
Thanks for sharing that
@halmartin76683 жыл бұрын
LOVE IT!!!!
@plssmellmycheese3 жыл бұрын
Wow..so good, as we have learned to expect....I thought maybe we don't need to make one of these as you can buy them for not too much, but yours works better in keeping the iron securely (mine can move sometimes), and at 90°)...so we DO all need to make one...so get on with it you lot! 😉👍
@tomas53763 жыл бұрын
Great guide...you and the new angle guide!👍✌️😊🙏🏼
@peregrine19703 жыл бұрын
Nice! One thought, what about using a couple short pieces of heat shrink to give the bearings some protection from rolling over the diamond grit?
@YoungJe3 жыл бұрын
The bearings used are very inexpensive (approximately $15 per 20 pieces), so if you replace the bearings only once a year, these jigs will always last a lifetime as new. To protect the diamond grit? It's about grinding heat-treated blades, but let's think about if you really need it.
@PeterNetped3 жыл бұрын
Top..
@UlisesUlises-xc6wp3 жыл бұрын
Maestro sus trabajos son los mejores 🌳✨
@ianvicedomini26483 жыл бұрын
Without a doubt, that jig looks a thousand times better than any that you'd Purchase from a store. Amazing work sir je
@Tensquaremetreworkshop24 күн бұрын
No, it isn't. Twin rollers mean each time the blade is put in, it will not meet the stone across its width, and excess material needs to be removed. With a single roller the blade sets the lateral position, and minimal material is removed. Also, a scrub plane needs a cambered blade- how do you achieve that with a twin roller jig?
@genekatauskas69042 жыл бұрын
Jewelry! Nice work 🔨
@leonardoreginelli3 жыл бұрын
Excellent!
@terrytopliss95063 жыл бұрын
You are a very clever man,thank you for the video.👍👍
@aerobill85543 жыл бұрын
Very Nice ! Greetings from the Netherlands 🇳🇱
@halvavich92827 ай бұрын
Классно
@matiaslucena98043 жыл бұрын
Matias Lucena 02 de Fevereiro de 2021 aqui em João Pessoa Paraíba Brasil ativando o sino antes de ver o vídeo ,suas criações são espetaculares, é muito prazeroso assistir suas obras, e digo mais eu não entendo como é que alguém se recusa a ativar o sino, eu penso que é inveja de pessoas sem competência e hoje ganhou mais um inscrito. DEUS o nosso pai terno e eterno o abençoe.
@MrGeroth3 жыл бұрын
I’d buy one.
@mudasirnajar23882 ай бұрын
May I buy this product Please reply
@marciowashingtonmartins39543 жыл бұрын
Nice
@user-cd6qz4rd1t3 жыл бұрын
👍👍👍👍
@theobolt2503 жыл бұрын
Very VERY impressive! I'm in awe. Such artisanship, such craftsmanship. Beautiful.
@MrAriano653 жыл бұрын
Impresionante la maestría desarrollada y la capacidad de neutralizar a lo establecido....un gusto ver su trabajo y que lo pueda compartir con nosotros, gracias y felicidades, saludos cordiales 🖐️ desde Chile 🇨🇱
@user-eq5pb7bw6s3 жыл бұрын
항상 잘보고 있습니다. 감사합니다 !
@YoungJe3 жыл бұрын
감사합니다~
@user-xk4jr3st9b3 жыл бұрын
Простая вещь, но хорошо сделана!!!
@MCsCreations3 жыл бұрын
Beautiful work, my friend! Looks and works fantastic! 😃 Really well done!!! Stay safe there with your family! 🖖😊
@YoungJe3 жыл бұрын
Thank you and I hope you stay safe
@philclennell2 жыл бұрын
Interesting to note that some niche plane makers are not using a back iron, with seemingly no difference in performance.
@Tensquaremetreworkshop24 күн бұрын
One roller. There should only be one roller. The blade will then always meet the stone across the cutting edge. With two rollers, the blade needs to return to exactly the same orientation (VERY difficult) or an excess of material has to be removed. As always in engineering, simple is best.
@bagheribagheri96882 жыл бұрын
what kind of sharpening stone did you use?🤔
@davecurda23503 жыл бұрын
Do you sell any of your planes?
@user-wr2fm7qe2m3 жыл бұрын
💯👍👋✌👏
@LuisTrujillo-rz6uk Жыл бұрын
Muy interesante alquirir conocimientos soy inventor
@thimitri13 жыл бұрын
I have the same sharpening jig and want to throw it in the trash.. I think I can make what you made.. Thank you for the idea..
@user-uq8ei1nj4p3 жыл бұрын
👍👍👍.
@singlefather013 жыл бұрын
Nah, I will just buy Woodpeckers
@johnpayne6196 Жыл бұрын
No respect for their tools - threw the honing gauge down. Give your tools to someone who respects them.
@amatar65 Жыл бұрын
Этот китайский мусор не достоин ни какого уважения!
@namabuki92523 жыл бұрын
Хорошая штучка, добротная, солидная. Но зачем 90% времени смотреть как сверлят и пилят дюраль?
@geoffbrumpton85443 жыл бұрын
I’ll have the old one, I just modify the tool gripping part and she is good to go 👍