MAKE A WiFi YOUTUBE SUBSCRIBER COUNTER CLOCK

[@MakersMuse]

This is super cool dude! The Dot Matrix module makes things so incredibly clean. Was also very refreshing to hear that accent haha.

[@amstudioprojects]

Thanks Angus! Yeah they are great for projects

[@itskagiso]

wtf.... When did you get to 35k subs?! But then again, Im not suprised - the quality of these vids is top shelf

[@Sayecra]

Thank you very much, had all of the bits ready and it worked a charm

[@marcushesketh5822]

I saw this in your setup and wondered what it was pretty cool

[@miguelavello7493]

GREAT VIDEO …. Thank you for sharing !!!!! Is it too complex to have both the KZbin subscribers count and a clock switching after certain time ?

[@amorporcalopsita]

follow the steps but I could not do the same programming that appears at the end 2:48

[@UBRArsenal]

I went to your link for the 3D Printed Case but I don't see anything listed for this case. Can you list the data needed to print the case?

[@legolas5684]

please continue making this it's amazing

[@MatthiasLenardt]

Really Cool 😎

[@whatupyo7260]

Always great stuff and instructional vids Keep it up

[@sindremarensiusstabell2225]

It would be really cool if you were able to make a manual key ignition for racing wheels, in order to get a full wheel setup

[@markisjr.4177]

Looks awesome, something to show off to friends and family!

[@jcadventurehd]

you make it look so easy

[@MohsinAliWaheed]

I want similar device which can display Bitcoin rate in real time.

[@amstudioprojects]

I like that idea!

[@TK-SmartHome]

Great work. Can you poste a Link to the STL-File of that case?

[@EdWin-il8sb]

I build it today, really easy and fun to do. Are there more Social Media counters Like Facebook, etc. Or does anyone knows a website where I can find more of these files ?

[@NiloyRashidOfficial]

Upload your one video on youtube

[@ChannelFiend]

Hello There! I need 2 cases like yours. How much would you charge with the plastic covering?

[@360co]

Great work ... its possible to easy change the code for instagram ? :) thank you

[@ninjabots5367]

Ofcourse it is

[@jpds01]

Thank you for this great tutorial. Ordered all the parts! I do have one question. Can you set the display to only show the subscribers count without scrolling?

[@MakerSpaceOnline]

Would like to know this as well...

[@nwin]

Yeah i would also like to know how to just show the subscriber count without scrolling

[@jpds01]

Nwin I already fixed it by removing all the yt2 lines in the sketch file.

[@CaddyWhumpusGamer]

Great video with all the links for things and the coding. when looking at the LED boards on eBay do I need to buy 4 of those and do I have to do all the soldering on them. also is this expandable to make the display longer? Liked and subbed. keep up the good work.

[@BigSStudios]

Where can I get the glass front that bolts onto the 3D printed case. I was about to buy the parts but there is no link to get that glass cover on front. Where would I buy one that fits into the case?

[@BigSStudios]

Pro Edits ok thank you.

[@BigSStudios]

Pro Edits I do not have one

[@lars-mulder]

Not going to use this any time soon, but again a great video!

[@StanMoi]

Great ! I will try to do it. I will try to add some more options like sound notifications, date and Time...

[@kcs4212]

great stuff as usual... just hope subscribers dont go beyond 1 million as it does not fit on screen ;))

[@amstudioprojects]

Lets get to 100k first!

[@rodillo]

i have a question, If I add more LED matrices, would I have to modify the code? or automatically detects it?

[@bbqkokkie]

Super nice ! wauw... only i cant find the STL ? can you send me a link ?

[@Guerdic]

I reckon this would be good with the iFlag System for iRacing. With the right code would you be able to use this matrix display?

[@slipangle3027]

I'd love something like this to display the time and weather or something.

[@StudioGuitarra]

I searched the 3D printed pieces all around your web but i cant find them, anyone has a direct link to them?

[@mehrnazkhezri5017]

Same here! @amstudio any updates?

[@mickredfox]

Verry Nice, i wondering if it is possible to have a counter for the numbers of downloads from my personal printables or makerbase web page. Thanks for your answer.

[@Rcschim]

Thanks for that - looks nice. Ordered it from Amazon - hope it works. Also hope that it still fetches data from KZbin these days - maybe it will get the "rounded" data - as youtube changed something?

[@MakerSpaceOnline]

Great project, can you set the display to only show the subscribers count without scrolling?

[@ZaabS14]

Nice job. Where did you get the box? Did you print it? Possible to get the STL if possible? Thank you very much

[@ruvas8451]

Hello Amstudio. Where can i find 3d Printed Case? Best regards.

[@MrThelosmy]

Please show us how to install a butt-kicker for shifting, your handbrake etc. I've built your analog handbrake and I love it, I would like to integrate a buttkicker aswell to get a awesome feeling when pulling the handbrake!

[@NickMaksy]

@amstudio All of the google dynamic links are broken. Any chance you could post the normal links?

[@W4ReLL]

Excellent like everytime!

[@amstudioprojects]

Thanks!

[@LagiWFH]

i like it, thanks for video

[@thanosmourtzoukos5048]

you are the best, KEEP IT UP ;)

[@orangecat6807]

Thanks for the excellent video! Do I need an arduino or just need to download the arduino IDE on my computer? Thanks again!

[@CATips]

This project Google APIs setting required?

[@TDPlayz]

How did you manage to explain and demonstrate this all under 5 minutes?! :D

[@skilledsphinx8643]

Good video will be that you can make a video of how to make a shifter in H for pc without Aurdino!

[@romankomm5139]

Please post a model for 3d printed Case, I'm doing my own custom clock and this case seems to be an ideal solution for me.

[@leoakirakblo]

Interesting! thx for share!

[@Warfalcon]

Isn't Perspex really hard to cut? How do you go about cutting it so smooth?

[@amstudioprojects]

I cut and finish mine by hand. Use a fine tooth saw then sand/polish.

[@Warfalcon]

It looks very well done. Nice work

[@RafaelDiFuria]

This may sound silly but, is it possible to do something like this but with an Ethernet module and power it over Ethernet? Does such a solution exist?

[@veturis3111]

Lol y you so good at making this

[@laurensguijt]

Is there a way I can transform this to a Twitch follow count ?

[@elifriedli2848]

I have the same question

[@MyLittleWorkstation]

is there a complete assembly kit to buy?

[@houssam2746]

Great job like everytime

[@Naferla]

Woaw amazing!! Anyway to buy this directly? :)

[@jsl82837]

Naferla Le metric for 200€

[@jamesmuffins3330]

Nice one mate!

[@tomifg]

Hey! I couldn't find the 3D model for the case. Can you please update the link, please? Thanks!

[@filippo5849]

What do you think about the thrustmaster tmx?

[@skywarsmaster9876]

Is the sketch compatibile with newer versions (You had 2.3.0, newest is 2.6.3) Please can you respond quick, because I just got all of the parts needed, and I want to finish it quick :) Btw love your videos.

[@c0pyimitati0n]

Anyway you'd sell the 3d printed case?

[@georgeeden5835]

Could you get it to display website views or Adsense revenue or something??

[@Tom-yv9hl]

Nice video man

[@joefeghali8604]

Can u make one for instagram live follower?

[@aem_xx_5700]

U deserve it 👍👍👏👏

[@wcisnijstart]

Hey there! Do You know how to make the counter change milions to likes of 1 mil instead of cropping it? Thanks in advance.

[@matthewhughes1116]

Could I do this for an elevator panel I’m making (obviously change the code)

[@The_Active_Region]

Doesn't seem to work for me. It said connecting to KZbin failed. But yet the WIFI is connecting fine.

[@kamathvignesh]

Hello, I tried exactly as instructed in your video I am getting "KZbin Error!" have entered Correct SSID and Password and also checked both combination of User ID and Channel ID too and Errer! Still persists. Could you pl write back. Or is it that KZbin has stopped giving credentials through USER ID or CHANNEL ID

[@naafff1]

Uploaded the code! But in serial monitor its automatically resetting. Will it create problem?? Plz reply ^_^

[@brandonuvinas]

Can you do a DYI xbox one sim handbrake for logitech g92?

[@MeAgainstMusic]

Is there a RGB Version of the Produino MAX7219 which can be used? I want to bring this whole thing "1 step further! :-)

[@TheHonestlySneakyGamer]

is there a way to get this to work with Twitch followers?

[@samiul16]

Is it possible to add code for time display with sub count?

[@baukevanderkooi8712]

I want to make one for thingiverse, thank you for your awsome video.

[@elmerbalentina5574]

What 3D printer do you use?

[@amstudioprojects]

This one kzbin.info/www/bejne/qXi4aXWkmbmYgq8

[@MrRapmann]

Can I also take the ESP8266 module? (also known as WiFi Jammer)

[@HELLOPATTAYA]

this is what i need to build for my 100000 subs.

[@alvarobmarcos]

Is possible to use it as a clock?

[@ItsKarenReyes]

Can you link the 3d project correctly i couldnt find it on the page you provided

[@drfezyt]

i looked at all the prices its $48.38 not bad compared to the other ones which are like $500!!!

[@Zockerzimmer]

Is it possible to change the code to show the Count of Twitch Followers instead?

[@johngolonbolon]

could you set it up so it could display other things like how hot it is

[@England91]

I guess you could modify the code a bit of where is grabbing it's data from and how to display it

[@daniels2851]

I bought everything except the case and glass now I wait and hope for luck that it works when I get it

[@zzzShaolinzzz]

by any chance could this be made to work with ESP32? How?

[@swekiller98]

im trying to find a code for this matrix that will show what lap and and what laptime you have, but so far i haven't found any

[@Ciiufu]

oh thanks for sharing this weed is good!!!

[@Vilterleno]

Do you shift from Logitech 3d pro

[@Slimecraftgaming1]

Cool bro

[@mytruckinlifeace4047]

Haha you just earned a sub

[@LeeroyLeBG]

So cool

[@pythoneatssquirrel]

Can you give me access to the code file?

[@radimnovak2202]

Is it possible to create a Arduino USB Speedometer? If yes, can You make a tutorial please :D

[@kibubkibub]

Anyone know where I can buy one like that? Looks like a lot of work

[@filippo5849]

You are a genious

[@Veymoz]

pls could u repost the stl file for the case?

[@jacquessnyman9544]

Can someone help. I got the items uploaded the sketch but as soon as it connects with the wifi it shows KZbin Error. Does anybody know what that means?

[@BrettSirrell]

Can this be set for Facebook likes ?

[@EnnTomi1]

after finish my hyercube evo, ill start make this. the 200$ one is such a rip off. oh and i will just make it into time, i dont have youtube videos haha

[@perabathulabhavanasai8696]

i have no 3d printer i want to buy printed case. you are directing to pinshape if they have a message box we can chat with them directly ,

[@briantw]

Sadly, they've changed the homepage code, so the code probably won't work. Even if you get it to work, they only show the 3 most significant digits, so 131,072 subscribers will now come through as 131K - not quite as exciting as being able to see individual numbers. Even the API offers only 3 most significant digit accuracy.

[@RodoHier]

Anyone building this still, i want one for my twitch channel subs. any options ?

[@nokidoc]

hi i have a esp8288 and a Max7219 and i look for a instruction for a instagram counter would be amazin if you can help me

[@allout-we7tj]

Your links do not work for the display

[@amstudioprojects]

Links are updated!